1. No category

InPro® 6000 Sensor Series
Oxygen Measurement Sensors
Technical Data
Short description
The InPro O2 sensor family provides the means for reliable in-line measurement of dissolved and gaseous
oxygen in a wide spectrum of processes amongst others under sterile/hygienic conditions. To meet the
range of respective requirements, METTLER TOLEDO offers a selection of advanced O2 sensors and measuring systems for the beverages industry, biotechnology and chemical industry.
Outstanding features of the O2 sensors are:
– hygienic design, capable of withstanding CIP procedures
– stainless steel surfaces with highly polished finish
– steam sterilizable and autoclavable up to 140 °C (284 °F)
– low detection limit at high signal stability
– O-rings with FDA and USP Class VI approval
– minimal maintenance requirement
– ISM (Intelligent Sensor Management) technology for digital sensors
Measuring systems for non-hygienic applications, such as in wastewater/effluent treatment, are also available.
InPro 6800 /
InPro 6850 i
InPro 6900 /
InPro 6900 i
InPro 6950 /
InPro 6950 i
Contents
InPro 6860 i
InPro 6870 i
(not shown)
InPro 6960 i
(not shown)
InPro 6970 i
USP
Class VI
Typical applications
2
Specifications
2
Drawings
6
Ordering information
8
Spare parts
9
Accessories
10
Compatibility with METTLER TOLEDO transmitters and housings
11
Oxygen measurement sensors
InPro 6000 Sensor Series
Amperometric Sensors
Typical applications
Biotechnology / Pharma
Fermentation
Brewery
Yeast propagation
CO2 recovery
CO2 conditioning
Wort aeration
Filtration
Filling
Mineral water and soft drinks
Spring water conditioning
Filling
Fruit juices and concentrates
Processing
Storage
Specifications
InPro 6950 (i)
InPro 6900 (i)
InPro 6800
InPro 6850 i
–
–
•
–
• (after recovery)
•
–
–
–
–
–
•
–
•
•
•
• (before recovery)
–
•
–
–
–
–
–
•
•
–
–
–
–
–
•
•
InPro 6950 (i)
InPro 6900 (i)
InPro 6800
InPro 6850 i
Measurement principle
Working conditions
Permissible pressure range
during measuring (abs.)
amperometric/polarographic
(in accordance with ISO 5814 and EN 25 814)
0.2 … 9 bar
2.9 …130 psi
–
0.2 … 6 bar
2.9 … 87 psi
–
Mech. pressure resistance
(absolute)
max. 12 bar
max. 174 psi
max. 12 bar
max. 174 psi
max. 12 bar
max. 174 psi
Permissible temperature
range during measuring
0 … 80 °C
32 …176 °F
0 … 80 °C
32 …176 °F
0 … 80 °C
32 …176 °F
Mechanical temperature
resistance
– steam-sterilizable
– autoclavable
– 5 …121°C
23 … 250 °F
•
–
– 5 …121°C
23 … 250 °F
•
–
– 5 …140 °C
23 … 284°F
•
•
0.1 ppb to air
saturation
1 ppb to oxygen
saturation
3 ppb to oxygen
saturation
ⱕ± [1 % + 0.1 ppb]
ⱕ± [1% + 0.25 ppb]
ⱕ± [1% + 1 ppb]
ⱕ± [1% + 3 ppb]
ⱕ± [1% + 3 ppb]
ⱕ± [1% + 6 ppb]
Sensor performance
Operating range
Accuracy
– in aqueous media
– in liquids containing CO2
2
0.2 … 6 bar
2.9 … 87 psi
using standard membrane
0.2 … 9 bar
2.9 …130 psi
using reinforced membrane
Oxygen measurement sensors
InPro 6000 Sensor Series
Optical Sensors
Typical applications
InPro 6860 i
InPro 6870 i
InPro 6960 i
InPro 6970 i
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
–
•
–
–
•
•
Biotechnology / Pharma
Fermentation
Brewery
Yeast propagation
CO2 recovery
CO2 conditioning
Wort aeration
Filtration
Filling
Mineral water and soft drinks
Spring water conditioning
Filling
Fruit juices and concentrates
Processing
Storage
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
Specifications
InPro 6860 i
InPro 6870 i
InPro 6960 i
InPro 6970 i
Measurement principle
optical
optical
optical
optical
Mech. pressure resistance
(absolute)
0.2 … 6 bar
2.9 … 87 psi
–
max. 6 bar
max. 87 psi
0.2 … 6 bar
2.9 … 87 psi
–
max. 6 bar
max. 87 psi
0.2 … 9 bar
2.9 …130 psi
–
max. 12 bar
max. 174 psi
0.2 … 18 bar
2.9 …261 psi
–
max. 12 bar
max. 174 psi
Permissible temperature
range during measuring
5 … 60 °C
41 …140 °F
5 … 60 °C
41 …140 °F
0 … 40 °C
32 …104 °F
0 … 40 °C
32 …104 °F
Mechanical temperature
resistance
– steam-sterilizable
– autoclavable
–20 …140 °C
–4 … 284 °F
•
•
–20 …121 °C
–4 … 250 °F
•
–
–20 …121 °C
–4 … 250 °F
•
–20 …121 °C
–4 … 250 °F
•
–
–
8 ppb to 60 %
O2 saturation
8 ppb to 60 %
O2 saturation
8 ppb to 60 %
O2 saturation
2 ppb to
2000 ppb
ⱕ±[1%+8 ppb]
ⱕ±[1%+8 ppb]
ⱕ±[1%+8 ppb]
ⱕ±[1%+8 ppb]
ⱕ±[1%+8 ppb]
ⱕ±[1%+8 ppb]
ⱕ±[1%+2 ppb]
ⱕ±[1%+2 ppb]
Working conditions
Permissible pressure range
during measuring (abs.)
Sensor performance
Operating range
Accuracy
– in aqueous media
– in liquids containing CO2
3
Oxygen measurement sensors
InPro 6000 Sensor Series
Amperometric Sensors
Specifications
InPro 6950 (i)
InPro 6900 (i)
InPro 6800
InPro 6850 i
Response time at 25 °C
(77 °F) [air ➝ N2]
t98% < 90 s
t98% < 90 s
t98% < 90 s
Sensor signal in ambient
air at 25 °C (77 °F)
2500 … 6000 nA
290 … 500 nA
50 … 110 nA
Residual signal in N2
at 25 °C (77 °F) in %
of signal in in ambient air
ⱕ 0.025 %
ⱕ 0.03 %
ⱕ 0.1 %
Design features
Temperature compensation
Cable connection
– analog
– digital
automatic with built-in RTD
VarioPin (IP 68)
K8S (IP 68)
Wetted O-rings
VarioPin or T-82
K8S (IP 68)
Silicone FDA & USP Class VI approved
(other materials on request)
O2 selective membrane
material
PTFE/Silicone
reinforced with
steel mesh
Wetted sensor parts
Silicone
PTFE/Silicone
reinforced with
steel mesh
PTFE/Silicone
reinforced with
steel mesh
PTFE
PTFE
S/steel 1.4404, [AISI 316L] with material certificate 3.1
(other materials on request)
Surface roughness of
wetted stainless steel
parts (EN 1320: 1996)
4
VarioPin (IP 68)
K8S (IP 68)
N5 ( Ra < 0.4 µm /< 16 µin)
Inner body
(exchangeable)
traces with guard
ring and reference
low ppb
with guard ring
InPro 6800: standard
InPro 6850 i: standard
with reference
Cathode
Pt
Pt
Pt
Anode
Pt
Ag/AgCl
InPro 6800: Ag/AgCl
InPro 6850 i: Pt
Reference
Ag/AgCl
Ag/AgCl
Ag/AgCl
Guard
Pt
Pt
–
ATEX compatibility
II 1/2 Ex ia IIC T6/T5/T4/T3
II 1/2 Ex ia IIC T6/T5/T4/T3
II 1/2 Ex ia IIC T6/T5/T4/T3
FM compatibility
IS CL I, II, III, Div 1/ABCDEFG/T6
IS CL I, II, III, Div 1/ABCDEFG/T6
IS CL I, II, III, Div 1/ABCDEFG/T6
Certificates (MaxCert™)
Quality Certificate (final inspection)
EHEDG
FDA
USP Class VI
Material Certificate 3.1
Surface Finish Certificate 2.1
ATEX / FM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Oxygen measurement sensors
InPro 6000 Sensor Series
Optical Sensors
Specifications
InPro 6860 i
InPro 6870 i
InPro 6960 i
InPro 6970 i
Response time at 25 °C
(77 °F) [air ➝ N2]
t98% < 70 s
t98% < 20 s
t98% < 20 s
t98% < 20 s
Sensor signal in ambient
air at 25 °C (77 °F)
phi100 =
15°– 35° 1
phi100 =
15°– 35° 1
phi100 =
15°– 35° 1
phi100=
11°– 18° 1
Residual signal in N2
at 25 °C (77 °F) in %
of signal in in ambient air
phi 0 =
50°– 62° 1
phi 0 =
50°– 62° 1
phi100 =
55°– 71° 1
phi 0 =
65°– 85° 1
Design features
Temperature compensation
Cable connection
– analog
– digital
automatic with built-in RTD
VP6
VP8
–
Data cable 5 pin
–
Data cable 5 pin
–
Data cable 5 pin
Wetted O-rings
EPDM,
FDA approved
EPDM,
FDA approved
EPDM,
FDA approved
EPDM,
FDA approved
O2 selective membrane
material
PTFE / Silicone
Silicone
Silicone
Silicone
Wetted sensor parts
PTFE
Silicone
Silicone
S/steel 1.4404, [AISI 316L] with material certificate 3.1
(other materials on request)
Surface roughness of
wetted stainless steel
parts (EN 1320: 1996)
Communication
Certificates (MaxCert™)
Quality Certificate (final inspection)
EHEDG
FDA
USP Class VI
Material Certificate 3.1
Surface Finish Certificate 2.1
ATEX / FM
Silicone
N5 (Ra < 0.4 µm /< 16 µin)
RS 485 (ISM)
RS 485 Modbus RTU
nA or mA
22 kOhm
–
–
–
–
–
–
–
–
–
–
–
–
•
–
•
–
•
•
• (InPro 6860 / .. / mA)
•
–
•
–
•
•
–
•
–
•
–
•
•
–
•
–
•
–
•
•
–
1 Phase of the fluorescence
5
Oxygen measurement sensors
InPro 6000 Sensor Series
Drawings amperometric sensors
VP connector,
angled
VP connector,
angled
VP connector,
straight
VP connector,
straight
Threaded sleeve
Pg 13.5
Washer
O-ring
Sensor head
Digital sensors
(ISM)
Cap nut G1
[ 25 mm
O-ring
[ 12 mm
Sensor shaft
Sensor shaft
O-ring
Inner body
InPro 6950 (i)
O-ring
O-ring
Inner body
O-ring
O-ring
Silver anode & reference
Reference
Anode
Cathode with
guard ring
O-ring
Inner body
O-ring
O-ring
a
Cathode (InPro 6900 i/6850 i
Silver anode
a
with guard ring; InPro 6800
without guard ring)
Retainer nut for
inner body (SS for analog,
Cathode
Retainer nut for
inner body
PPS for digital sensors)
Membrane body
Membrane body
O-ring
O-ring
Cap sleeve
(N type)
Cap sleeve
(N type)
Watering cap
(InPro 6950 (i),
InPro 6900)
6
12 mm Sensor
InPro 6800
InPro 6850 i
InPro 6900 (i)
InPro 6950 (i)
Protection cap
25 mm Sensor
InPro 6800
InPro 6850 i
Oxygen measurement sensors
InPro 6000 Sensor Series
Drawings optical sensors
5 pin
connector
VP connector
Sensor head
InPro 6870 i
InPro 6960 i
InPro 6970 i:
The sensor
head is not
separable
from the
sensor shaft.
Sensor head
Threaded sleeve
Pg 13.5
Washer
Washer
O-ring
O-ring
Sensor shaft
Sensor shaft
[ 12 mm
[ 12 mm
a
a
Optical module
Inner body
ap
12 mm Sensor
InPro 6870 i
InPro 6860 i
InPro 6960 i
InPro 6970 i
O-ring
O-ring
OptoCap
OptoCap
12 mm Sensor
InPro 6860 i
7
Oxygen measurement sensors
InPro 6000 Sensor Series
Ordering information
Amperometric sensors
InPro 6800, 12 mm ⵰
Immersion length (a)
70 mm (2.8")
80 mm (3.2")
120 mm (4.7")
220 mm (8.7")
320 mm (12.6")
420 mm (16.5")
InPro 6800, 25 mm ⵰
Immersion length (a)
80 mm (3.2")
160 mm (6.3")
260 mm (10.2")
360 mm (14.2")
InPro 6850 i
Immersion length (a)
70 mm (2.8")
120 mm (4.7")
220 mm (8.7")
320 mm (12.6")
420 mm (16.5")
Order no.
VP connector
straight
52 200 964
–
52 200 965
52 200 966
52 200 967
52 200 968
VP connector
straight
52 200 974
52 200 975
52 200 976
52 200 977
12 mm ⵰
52 206 118
52 206 119
52 206 120
52 206 121
52 206 122
Order no.
angled
52 200 969
–
52 200 970
52 200 971
52 200 972
52 200 973
Order no.
T82 connector
straight
–
–
52 201 012
52 201 013
52 201 014
52 201 015
angled
–
–
52 201 016
52 201 017
52 201 018
52 201 019
angled
52 200 978
52 200 979
52 200 980
52 200 981
T82 connector
straight
52 201 020
52 201 021
52 201 022
–
angled
52 201 023
52 201 024
52 201 025
–
Immersion length (a)
80 mm (3.2")
160 mm (6.3")
260 mm (10.2")
360 mm (14.2")
25 mm ⵰
52 206 123
52 206 124
52 206 125
52 206 126
InPro 6900, 12 mm ⵰
VP connector
Immersion length (a)
straight
70 mm (2.8")
52 200 944
120 mm (4.7")
52 200 945
220 mm (8.7")
52 200 946
320 mm (12.6")
–
Version with Varivent flange
InPro 6900/12/060 V80
52 200 951
InPro 6900i, 12 mm ⵰
AK9 connector
angled
52 200 947
52 200 948
52 200 949
–
Immersion length (a)
70 mm (2.8")
120 mm (4.7")
220 mm (8.7")
Version with Varivent flange
InPro 6950/12/060 V80
52 206 110
Optical sensors
8
for Biopharma
12 mm ⵰
Immersion length (a)
120 mm (4.7")
220 mm (8.7")
320 mm (12.6")
420 mm(16.5")
for Food & Beverage
12 mm ⵰
Immersion length (a)
120 mm (4.7")
220 mm (8.7")
320 mm (12.6")
52 206 316
52 206 317
52 206 318
52 206 319
–
InPro 6950, 12 mm ⵰
VP connector
straight
52 206 097
52 206 098
52 206 099
Order no.
angled
52 206 101
52 206 102
52 206 103
InPro 6950 i, 12 mm ⵰
AK9 connector
Immersion length (a)
70 mm (2.8")
52 206 127
120 mm (4.7")
52 206 128
220 mm (8.7")
52 206 129
320 mm (12.6")
52 206 130
–
InPro 6860 i / nA
InPro 6860 i / mA
InPro 6870i
30 014 100
30 014 101
30 014 102
30 014 103
30 129 734
30 129 735
30 129 736
30 129 737
52 206 380
52 206 381
52 206 382
52 206 383
InPro 6960 i
InPro 6970 i
52 206 500
52 206 501
52 206 502
52 206 393
52 206 394
52 206 395
Oxygen measurement sensors
InPro 6000 Sensor Series
Spare parts amperometric sensors
InPro 6950 (i)
Membrane body InPro 6950 (single unit)
Membrane kit InPro 6950 (4 membrane bodies, 1 O-ring set, 2 ⫻ 5 ml electrolyte)
Electrolyte InPro 6950 (5 ml)
Inner body InPro 6950 (exchangeable)
Inner body
InPro 6950 (i) InPro 6800
Membrane body
T-6900 R
T-96
Cap sleeve
P type
N type
InPro 6900 (i)
Membrane body T-6900 (single unit)
Membrane kit T-6900 (4 membrane bodies, 1 O-ring set, 2 ⫻ 5 ml electrolyte)
Reinforced membrane body T-6900 R (single unit)
Reinforced membrane kit T-6900 R
(4 reinforced membrane bodies, 1 O-ring set, 2 ⫻ 5 ml electrolyte)
Electrolyte InPro 6900 (5 ml)
Inner body InPro 6900 (exchangeable)
Order no.
52 206 105
52 206 106
52 206 111
52 206 112
52 201 049
52 201 003
52 201 108
52 201 109
52 201 005
52 200 943
InPro 6950 (i) / 6900 (i) / 6800 / 6850 i
Cap sleeve N type, stainless steel 1.4404 (AISI 316L)
Cap sleeve N type, stainless steel 1.4435 (AISI 316L)
Cap sleeve P type, stainless steel 1.4404 (AISI 316L)
Cap sleeve P type, stainless steel 1.4435 (AISI 316L)
52 200 037
52 201 153
52 200 038
52 201 154
InPro 6800 / 6850 i
Membrane body T-96 (single unit)
Membrane kit T-96 (4 membrane bodies, 1 O-ring set, 25 ml electrolyte)
Membrane body S-96 (single unit)
Membrane kit S-96 (4 membrane bodies, 1 O-ring set, 25 ml electrolyte)
Electrolyte 25 ml
Inner body InPro 6800 (exchangeable)
Inner body InPro 6850 i (exchangeable)
52 200 071
52 200 024
52 200 072
52 200 025
34 100 2016
52 200 899
52 206 347
InPro 6860 i / 6870 i
OptoCap BT 01 (InPro 6870 i)
OptoCap BT 02T (InPro 6860 i) incl. O-ring
O-ring set (InPro 6870 i)
Cap sleeve, stainless steel 1.4404 (AISI 316L)
52 206 225
30 018 857
52 206 252
52 206 232
InPro 6960 i / 6970 i
OptoCap BW 01 (InPro 6960 i)
OptoCap BR 01 (InPro 6970 i)
O-ring set
Cap sleeve, stainless steel 1.4404 (AISI 316L)
52 206 509
52 206 403
52 206 252
52 206 232
Spare parts optical sensors
OptoCap
InPro 6870 i
InPro 6860 i
InPro 6970 i
InPro 6960 i
9
Oxygen measurement sensors
InPro 6000 Sensor Series
Accessories amperometric sensors
02 sensor master
The sensor master serves to polarize the connected sensor in air as well as to check functioning of the sensor.
Perfect operation of the sensor master can also be verified through a self-check procedure.
02 sensor simulator
The sensor simulator is used to perform a function check of transmitter and cable. It simulates the behavior of the
sensor in air and in an oxygen-free medium. This device can be used to simulate all amperometric analog O2 sensors.
Adapter T-82 bushing / VP connector, order no. 52 200 939
Adapter VP bushing / T-82 connector , order no. 52 200 940
Sensor
Order no.
52 206 113
O2 sensor master InPro 6950
O2 sensor master InPro 6900
52 200 893
O2 sensor master InPro 6800
52 200 892
O2 sensor master ISM
52 206 329
O2 sensor simulator
52 200 891
Zeroing gel for zero-point control (amperometric sensors only)
34 100 1032
Adapter T-82 bushing / VP connector
52 200 939
Adapter VP bushing / T-82 connector
52 200 940
Retrofit kit optical
52 403 811
VP cable
Order no.
Order no.
Temperature range –30 … 80 °C / –22 …176 °F
Temperature range –30 … 130 °C / –22 … 266 °F
VP6-ST / 1 m
52 300 107
VP6-HT / 1 m
52 300 111
VP6-ST / 3 m
52 300 108
VP6-HT / 3 m
52 300 112
VP6-ST / 5 m
52 300 109
VP6-HT / 5 m
52 300 113
VP6-ST / 10 m
52 300 110
VP6-HT / 10 m
52 300 114
VP6-ST / 15 m
52 300 144
VP6-HT / 15 m
52 300 237
VP6-ST / 35 m
52 300 184
AK9 coax cables with K8S connector
1 m (3.3 ft)
10 000 0102
3 m (9.8 ft)
10 000 0302
5 m (16.4 ft)
10 000 0502
10 m (32.8 ft)
10 000 1002
20 m (65.6 ft)
52 300 204
Accessories optical sensors
10
InPro optical DO data cable (InPro 6870 i / 6960 i / 6970 i)
Temperature range –30 … 80 °C / –22 …176 °F
Order no.
Order no.
2m
(6.6 ft)
52 300 379
15 m (49.2 ft)
52 300 422
5m
(16.4 ft)
52 300 380
25 m (82.0 ft)
52 300 529
10 m (32.8 ft)
52 300 381
50 m (164.0 ft)
52 300 530
VP cable (InPro 6860 i)
Order no.
Order no.
Temperature range –30 … 80 °C / –22 …176 °F
Temperature range –30 … 130 °C / –22 … 266 °F
VP8-ST / 1 m
52 300 353
VP8-HT / 1 m
52 300 360
VP8-ST / 3 m
52 300 354
VP8-HT / 3 m
52 300 361
VP8-ST / 5 m
52 300 355
VP8-HT / 5 m
52 300 362
VP8-ST / 10 m
52 300 356
VP8-HT / 10 m
52 300 363
VP8-ST / 15 m
52 300 357
VP8-HT / 15 m
52 300 364
VP8-ST / 20 m
52 300 358
VP8-ST / 35 m
52 300 359
Power Supply / Power Adapters
Order no.
Power supply for InPro 6860 i
30 014 119
Power adapter ODO T82
30 083 984
Power adapter ODO VP6
30 083 985
Ex i power supply 9143/10-244-060-20s
30 215 910
Signal converter 4/20 Hart (active/passive)
30 212 436
Oxygen measurement sensors
InPro 6000 Sensor Series
Accessories amperometric & optical sensors
CalBox
Designation
iSense Asset Suite
CalBox
iLink RS485
iLink RS485 – VP (InPro 6860 i)
Order no.
52 900 336
52 300 400
52 300 399
30 014 134
Compatibility with METTLER TOLEDO transmitters for amperometric sensors
Please ask your local
METTLER TOLEDO
sales representative.
InPro 6950 (i)
• (4700 i ppb)
•1
–
•
•
•
InPro 6800
InPro 6850 i
• (4700 i)
•
•
•
•
•
12 mm ⵰
–
•
25 mm ⵰
•
–
•
•
–
–
•
–
InPro 6860 i
InPro 6870 i
–
–
–
•
–
•
–
–
–
•
–
•
InPro 6960 i
InPro 6970 i
–
–
–
•
–
•
M700
• (4700 i traces)
4100 PA, FF
–
M300
–
M400 2-wire, PA, FF
•2
M420
• (TAN)
M8002
•
1 limited functions, 2 ISM sensors only
InPro 6900 (i)
Compatibility with METTLER TOLEDO housings for amperometric sensors
Please ask your local
METTLER TOLEDO
sales representative.
Static housings
INGOLD “safety weld-in socket”
InFit 761 series
Retractable housing
InTrac 777 e
InTrac 797 e
Immersion housing
InDip 550
Compatibility with METTLER TOLEDO transmitters for optical sensors
Please ask your local
METTLER TOLEDO
sales representative.
M700
4100 PA, FF
M300
M400 2-wire, PA, FF
M420
M800
Compatibility with METTLER TOLEDO housings for optical sensors
Please ask your local
METTLER TOLEDO
sales representative.
Static housings
InPro 6860 i
InPro 6870 i
INGOLD “safety weld-in socket”
InFit 761 series
Retractable housing
InTrac 777 e
InTrac 797 e
Immersion housing
InDip 550
Conversion kit
Retrofit kit optical
–
•
–
•
InPro 6960 i
InPro 6970 i
–
•
•
•
•
•
•
•
•
–
–
•
•
•
11
METTLER TOLEDO Market Organizations
Sales and Service:
Australia
Mettler-Toledo Ltd.
220 Turner Street
Port Melbourne
AUS - 3207 Melbourne / VIC
Phone +61 1300 659 761
Fax
+61 3 9645 3935
e-mail info.mtaus@mt.com
France
Mettler-Toledo
Analyse Industrielle S.A.S.
30, Boulevard de Douaumont
F - 75017 Paris
Phone +33 1 47 37 06 00
Fax
+33 1 47 37 46 26
e-mail mtpro-f@mt.com
Austria
Mettler-Toledo Ges.m.b.H.
Südrandstraße 17
A -1230 Wien
Phone +43 1 604 19 80
Fax
+43 1 604 28 80
e-mail infoprocess.mtat@mt.com
Germany
Mettler-Toledo GmbH
Prozeßanalytik
Ockerweg 3
D - 35396 Gießen
Phone +49 641 507 333
Fax
+49 641 507 397
e-mail prozess@mt.com
Brazil
Mettler-Toledo Ind. e Com. Ltda.
Avenida Tamboré, 418
Tamboré
BR - 06460-000 Barueri / SP
Tel.
+55 11 4166 7400
Fax
+55 11 4166 7401
e-mail mettler@mettler.com.br
service@mettler.com.br
China
Mettler-Toledo Instruments
(Shanghai) Co. Ltd.
589 Gui Ping Road
Cao He Jing
CN - 200233 Shanghai
Phone +86 21 64 85 04 35
Fax
+86 21 64 85 33 51
e-mail mtcs@public.sta.net.cn
Croatia
Mettler-Toledo d.o.o.
Mandlova 3
HR -10000 Zagreb
Phone +385 1 292 06 33
Fax
+385 1 295 81 40
e-mail mt.zagreb@mt.com
Czech Republic
Mettler-Toledo s.r.o.
Trebohosticka 2283 / 2
CZ -100 00 Praha 10
Phone +420 2 72 123 150
Fax
+420 2 72 123 170
e-mail sales.mtcz@mt.com
Denmark
Mettler-Toledo A /S
Naverland 8
DK - 2600 Glostrup
Phone +45 43 27 08 00
Fax
+45 43 27 08 28
e-mail info.mtdk@mt.com
ISO
ISO
9001
14001
certified
Great Britain
Mettler-Toledo LTD
64 Boston Road, Beaumont Leys
GB - Leicester LE4 1AW
Phone +44 116 235 7070
Fax
+44 116 236 5500
e-mail enquire.mtuk@mt.com
Hungary
Mettler-Toledo Kereskedelmi KFT
Teve u. 41
HU -1139 Budapest
Phone +36 1 288 40 40
Fax
+36 1 288 40 50
e-mail mthu@axelero.hu
India
Mettler-Toledo India Private Limited
Amar Hill, Saki Vihar Road
Powai
IN - 400 072 Mumbai
Phone +91 22 2857 0808
Fax
+91 22 2857 5071
e-mail sales.mtin@mt.com
Italy
Mettler-Toledo S.p.A.
Via Vialba 42
I - 20026 Novate Milanese
Phone +39 02 333 321
Fax
+39 02 356 2973
e-mail
customercare.italia@mt.com
Japan
Mettler-Toledo K.K.
Process Division
6F Ikenohata Nisshoku Bldg.
2-9-7, Ikenohata
Taito-ku
JP -110-0008 Tokyo
Phone +81 3 5815 5606
Fax
+81 3 5815 5626
e-mail helpdesk.ing.jp@mt.com
Malaysia
Mettler-Toledo (M) Sdn Bhd
Bangunan Electroscon Holding, U 1-01
Lot 8 Jalan Astaka U8 / 84
Seksyen U8, Bukit Jelutong
MY - 40150 Shah Alam Selangor
Phone +60 3 78 44 58 88
Fax
+60 3 78 45 87 73
e-mail
MT-MY.CustomerSupport@mt.com
Mexico
Mettler-Toledo S.A. de C.V.
Ejercito Nacional #340
Col. Chapultepec Morales
Del. Miguel Hidalgo
MX - 11570 México D.F.
Phone +52 55 1946 0900
e-mail ventas.lab@mt.com
Poland
Mettler-Toledo (Poland) Sp.z.o.o.
ul. Poleczki 21
PL - 02-822 Warszawa
Phone +48 22 545 06 80
Fax
+48 22 545 06 88
e-mail polska@mt.com
Russia
Mettler-Toledo Vostok ZAO
Sretenskij Bulvar 6/1
Office 6
RU -101000 Moscow
Phone +7 495 621 56 66
Fax
+7 495 621 63 53
e-mail inforus@mt.com
Singapore
Mettler-Toledo (S) Pte. Ltd.
Block 28
Ayer Rajah Crescent # 05-01
SG -139959 Singapore
Phone +65 6890 00 11
Fax
+65 6890 00 12
+65 6890 00 13
e-mail precision@mt.com
Slovakia
Mettler-Toledo s.r.o.
Hattalova 12 / A
SK - 831 03 Bratislava
Phone +421 2 4444 12 20-2
Fax
+421 2 4444 12 23
e-mail predaj@mt.com
Slovenia
Mettler-Toledo d.o.o.
Pot heroja Trtnika 26
SI -1261 Ljubljana-Dobrunje
Phone +386 1 530 80 50
Fax
+386 1 562 17 89
e-mail keith.racman@mt.com
South Korea
Mettler-Toledo (Korea) Ltd.
Yeil Building 1 & 2 F
124-5, YangJe-Dong
SeCho-Ku
KR -137-130 Seoul
Phone +82 2 3498 3500
Fax
+82 2 3498 3555
e-mail Sales_MTKR@mt.com
Spain
Mettler-Toledo S.A.E.
C / Miguel Hernández, 69-71
ES - 08908 L’Hospitalet de Llobregat
(Barcelona)
Phone +34 902 32 00 23
Fax
+34 902 32 00 24
e-mail mtemkt@mt.com
Sweden
Mettler-Toledo AB
Virkesvägen 10
Box 92161
SE -12008 Stockholm
Phone +46 8 702 50 00
Fax
+46 8 642 45 62
e-mail sales.mts@mt.com
Switzerland
Mettler-Toledo (Schweiz) GmbH
Im Langacher
Postfach
CH - 8606 Greifensee
Phone +41 44 944 45 45
Fax
+41 44 944 45 10
e-mail salesola.ch@mt.com
Thailand
Mettler-Toledo (Thailand) Ltd.
272 Soi Soonvijai 4
Rama 9 Rd., Bangkapi
Huay Kwang
TH -10320 Bangkok
Phone +66 2 723 03 00
Fax
+66 2 719 64 79
e-mail
MT-TH.CustomerSupport@mt.com
USA / Canada
METTLER TOLEDO
Process Analytics
900 Middlesex Turnpike, Bld. 8
Billerica, MA 01821, USA
Phone
+1 781 301 8800
Freephone +1 800 352 8763
Fax
+1 781 271 0681
e-mail
mtprous@mt.com
certified
Management System
certified according to
ISO 9001 / ISO 14001
Subject to technical changes.
11 / 2014 © Mettler-Toledo AG
Printed in Switzerland. 52 206 266
Mettler-Toledo AG, Process Analytics
Im Hackacker 15, CH - 8902 Urdorf
Phone +41 44 729 62 11, Fax +41 44 729 66 36
www.mt.com/pro