Nå kun 16 900,- eks. mva.

O+P S01 AVGRADINGSMASKIN
Artikkel nr.: V52240
Mobil, rimelig og funksjonell avgradingsmaskin for både innvendig og utvendig avgrading av
rør med OD 6-42mm. Leveres med verktøy for rør Ø 6-42mm.
Bruksområde: Rustfritt stål (AISI 316 TI) og Karbon stål (St 37.4) rør.
Teknisk data | S01: Kapasitet: Ø6-42 mm | Motor: 0,18 KW | Strøm: 230V 50Hz |
Vekt: 28 Kg | Dimensjon: 380x488x320mm
Nå kun
16 900,- eks. mva.
Alf I Larsen AS
51 44 35 00
www.ail.no
post@ail.no
TPP 5090 POLISHING MACHINE ®
Artikkel nr.: V50184
• fast polishing of welding preperations • safe in use
• compact build • easily adjustable
The TPP air driven polishing machine is the solution of Th. Wortelboer BV for conditioning welding
preparations quickly and easy. Tubes, pipes as well as plate edges can be prepared for welding quickly
and safely.
The two polishing wheels of the TPP 5090 can easily be adjusted according to the thickness of the
material.
The inevitable wear of the wheels, which decreases the wheel diameter, can simply be corrected.
Technical specifications:
Model:
Type:
Air consumption:
Drive:
Polishing:
Pipe size:
Plug Diameter :
Polishing reach:
Avaiable grids:
TPP 5090 S
with straight handle
0.46 m³/min - 16 CFM
manual feed
inside and outside
I.D. Ø 60 mm and up
NA
25 - 30 mm
flap wheels (grid 40 and 80) and (black) strip wheels
Speed / Working pressure / Weight 18.000 rpm / 6 Bar - 90 Psi / 3.5 Kg - 7.7 Lbs
Nå kun
14 900,- eks. mva.
Alf I Larsen AS
51 44 35 00
www.ail.no
post@ail.no
T-Drill TC-1 S
Cordless Tube Cutting Tool
Tube cutting has never been so easy. The new TC-1S cordless tube cutting tools
actually rotate around the tube. The TC-1S has auto-feed for different materials and
hardness – all done with a chip-less cut. The tool also has tube end
finishing features. Strong, safe and efficient to improve profit.
Technical specification:
Tube size:
Tube wall thickness
Battery capacity
Nominal voltage
Weight
3 mm ID to 22 mm OD
up to 2.5 mm
2.0 Ah
18 V
4 kg
For stainless steel pipes, max 1.5mm wall thickness
Nå kun
2 500,- eks. mva.
Alf I Larsen AS
Alf I Larsen AS
51 44 35 00
51 44 35 00
www.ail.no
www.ail.no
post@ail.no
post@ail.no
T-60 PORTABEL KRAGEOPPTREKKER
Art. nr.: V31948
•
•
•
•
•
Krageopptrekker (T-Joint) for rustfrie rør (OD 20-51mm).
Reduserer sveise kostnader.
Eliminerer bruk av T-skjøte.
Arbeid syklustid 5-10 min.
Enkelt prosses i 3 trinn: Fres—Opptrekk– Trim.
Leveres i metall koffert med:
• Rør holder
Motholdsplate for rør
• Pilot bor
• Trimme verktøy
• Smøringsmiddel
Teknisk data | T-60: Krage dia.: Ø20-51mm | Rør dia.: Ø 33,7-114,3mm |
Rør veggtykkelse: 1,2-2,0mm | Dimensjon: 570x125x180mm | Vekt: 5,4 kg
Nå kun
Alf I Larsen AS
51 44 35 00
24.000,- eks. mva.
www.ail.no
post@ail.no