1. No category

Evaluative Report of Mechanical & Automobile Engineering Department
1. Name of the Department: Department of Mechanical & Automobile Engineering.
2. Year of Establishment: Mechanical Engineering (2004) & Automobile Engineering (2013)
3. Names of Programmes /Courses offered (UG, PG, M. Phil., Ph.D., Integrated Masters; Integrated
Ph.D., etc.):
Program
B.Tech in Mechanical Engineering
B.Tech in Automobile Engineering
M.Tech.in Mechanical Engineering
Duration
Year of start
4 years
4 years
2 years
2004
2013
2013
4. Names of Interdisciplinary courses and the departments/units involve:
a) Courses/Subjects:
S. No.
Names of Interdisciplinary courses/Subjects
Departments involved
1
Fundamental of computer programming and Information
Technology
Basics of electrical and electronics engineering
CSE /IT Department
2
Electrical Engg. Department
5. Annual/semester/choice based credit system (programme wise): Semester based credit system
6. Participation of the department in the courses offered by other departments:
S. No.
Programs offered by
other departments
Participation of ME Department
1
B.Tech CSE/IT
2
B.Tech ECE
Teaching Subjects namely ‘Elements of Mechanical Engineering,
3
B.Tech EE
Engineering Drawing and Computer Graphics’.
4
B.Tech Civil
5
B.Tech ELCE
6
B Tech EE
Teaching subject ‘Power plant engineering’
7. Courses in collaboration with other universities, industries, foreign institutions etc:
S.
No.
1
Course Names
Industrial Contribution (if any)
CAD/CAM
Department of ME has set up a "SIEMENS Centre of
Excellence" at the premises of CTIEMT. Training on SOLID
EDGE software is provided to excel the students in the field of
designing.
8. Details of courses/programmes discontinued (if any) with reasons: NIL
9. Number of teaching posts:
Sanctioned
Filled
Professors
05
03
Associate Professors
07
00
23
32
Asst. Professors
10. Faculty profile with name, qualification, designation, specialization,(D.Sc./D.Litt./Ph.D./M. Phil
.etc.):
Sr.
No.
Name
Qualification
Designati
on
Specialization
No. of Years
of Exp.
1
Dr. Sumit Jain
Ph.D
Professor
2
Dr. Gurudutt
Sahni
Dr. P.C. Maity
Dr. Mandeep
Kaur
Dr. Amandeep
Bains
Mr. Rahul
Joshi
Mr. Harjit
Singh
Mr. Jatinder
Kumar
Mr. Amandeep
Singh
Mr. Harpreet
Singh
Mr. Anuraj
Singh
Mr. Satbir
Singh Saini
Mr. Punit
Sarwal
Mr. Manpreet
Singh
Mr. Sanjeev
Kumar
Mr. Gurpreet
Singh
Mr. Mandeep
Singh
Mr. Varinder
Singh
Mr. Vikas
Kumar
Ph.D
Professor
Industrial/Product
ion
Mechanical
Ph.D
Ph.D, M.Sc
(Chem), B.Sc
Ph.D (
Physics)
Ph.D
(pursuing)
Ph.D
(pursuing)
Ph.D
(pursuing)
M. Tech
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
M. Tech
M. Tech
M. Tech
M. S
M. Tech
M. Tech
M. Tech
Ph.D
(pursuing)
Ph.D
(pursuing)
M. Tech
Nature of
employment
10
No. of Ph.D.
students
guided in the
last 4 years
Nil
14
Nil
Permanent
Mechanical
chemistry
35
1
Nil
Nil
Permanent
Permanent
Physics(on study
Leave)
Production
5
Nil
Permanent
14
N/A
Permanent
Industrial
11
N/A
Permanent
Production
10
N/A
Permanent
Mechanical
4.5
N/A
Permanent
Mechanical
9.5
N/A
Permanent
Manufacturing
4
N/A
Permanent
Production
6
N/A
Permanent
Production
3
N/A
Permanent
Production
5.5
N/A
Permanent
Production
4.5
N/A
Permanent
CAD/CAM
1
N/A
Permanent
Mechanical
1
N/A
Permanent
Thermal
4
N/A
Permanent
CAD/CAM
8
N/A
Permanent
Permanent
20
Mr. Mandeep
Kumar
Mr. Harpreet
Singh Bedi
Mr.
Amanpreet
Singh
Mr. Vikram
Singh Jamwal
Mr. Palwinder
Singh
Ms. Jaskiran
Kaur
Ms. Rashmi
21
22
23
24
25
26
27
Mr.
Akashdeep
Goel
Mrs. Jasmeen
Kaur
28
M. Tech
M. Tech
M. E
M. E.
M.Phil, M.Sc.
(Maths)
MBA
M.Sc ,B.Ed,
(Maths)
M. Tech
Assistant
Professor
Assistant
Professor
Assistant
Professor
Manufacturing
1
N/A
Permanent
Mechanical
1
N/A
Permanent
Thermal
3
N/A
Permanent
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Assistant
Professor
Thermal
2
N/A
Permanent
Pure Mathematics
9
N/A
Permanent
Communication
Skills
Pure Mathematics
2
N/A
Permanent
2
N/A
Permanent
Mechanical
5
N/A
Temporary
M. Tech
Assistant
Professor
Mechanical
5
N/A
Temporary
29
Mr. Rupinder
Singh
M. Tech
Assistant
Professor
Production
5.5
N/A
Temporary
30
Mr. Amninder
Singh
M. Tech
Assistant
Professor
Production
2
N/A
Temporary
31
Mr. Harkirat
Singh
M. Tech
Assistant
Professor
Mechanical
(Welding)
2
N/A
Temporary
32
Mr. Surinder
Singh
M. Tech
Assistant
Professor
Production
5.5
N/A
Temporary
33
Mr.
Harjaskirat
Singh
Ms. Rimple
M. Tech
Assistant
Professor
Production
1
N/A
Temporary
M.Phil,
M.Sc.(Maths)
Assistant
Professor
Pure Mathematics
9
N/A
Temporary
M.Sc.
(Chem.)
Assistant
Professor
Inorganic
Chemistry
3
N/A
Temporary
34
35
Ms. Binu
Bhanot
11. List of senior visiting faculty:
Year 2015
S.No.
Name of visiting faculty
Organization
Designation
1
Dr. Ranjit Singh
BCET, Gurdaspur
Associate Professor
2
Dr. R.K. Garg
NIT, Jalandhar
Professor
Vendors
Work Profile
Cutting Edge, Jalandhar
Aptitude Trainer
Year 2014
S.No.
Name of visiting faculty
1
Ms. Priyanka
2
Mr. Akash
Winstar Institute of Management &
Technology,Jalandhar.
Aptitude Trainer
3
Mr. Simerjit Singh
Aspiring Mind,New Delhi
Motivational Speaker
4
Mr. V K Khurana
Ralson Tyres, Ludhiana.
HR
Vendors
Work Profile
Year 2013
S.No.
Name of visiting faculty
1
Mr. Vamsi
Career Cafe, Jalandhar
Aptitude Trainer
2
Mr. KJS Pannu
Milestone 9,Jalandhar
Soft Skill
Mr. Amit
Xmplar Management solutions Pvt.
Ltd. Noida
Soft Skill
Ms. Parul Verma
Cynosure
Soft skill
S.No.
Name of visiting faculty
Vendors
Work Profile
1
Prof Jagdev Singh
Bhabha Atomic Research Centre,
Mumbai.
Scientist
2
Col Pushpinder
Sassy Puma Solutions, Panchkula.
CEO
3
4
Year 2012
12. Percentage of lectures delivered and practical classes handled (programme-wise) by temporary
faculty: 25.71%
13. Student-Teacher Ratio (programme-wise):
B. Tech (ME & AUE) =1: 14.60
M Tech. (Mechanical Engg.) = 1:4.5
14. Number of academic support staff (technical) and administrative staff; sanctioned and filled:
List of Non- Teaching Staff
Sanctioned
Filled
Technical
08
08
Administrative
43
43 (shared)
Qualification details of Technical Supporting Staff:
S.
No
1
2
3
4
5
Name of Supporting Staff
(Technical)
Mr. Iqbal Singh
Mr. Rohit Kumar
Mr. Vijay Kumar
Mr. Shadi Lal
Mr. Navdeep
Qualification
Experience
B.Tech in Mechanical Engineering
Diploma in Mechanical Engineering
Diploma in Mechanical Engineering
Diploma in Mechanical Engineering
B.Tech in Mechanical Engineering
7 years
13 years
4 years
6 years
3.5 years
6
7
Naveen Kaushik
Mr. Sanjeet Kumar Minhas
8
Mr. Jai Gurdip
List of administrative staff:
Sr.
No.
1
Name
Mr. Sukdev Singh
3
4
5
6
7
8
9
Mr. Puneet
Malhotra
Ms. Pawanpreet
Kaur
Ms. Kiran Sharma
Ms. Neetu Sharma
Mr. Joginder Singh
Mr. Naresh Kumar
Mr. Sandeep Rai
Mr. Manoj Kumar
10
11
12
Mr. Rakesh Kumar
Mr. Abhishek Soni
Ms. Rajinder Kaur
13
24
25
26
27
28
Mr. Vishav Kapoor
Mr. RajKumar
Nahar
Mr. Arpinder Singh
Mr. Sukhninder
Singh
Mr. Vijay Kumar
Verma
Mr. Joga Singh
Mr. Jagdish K
Chander
Mr. Tarsem Lal
Mr. Tarlochan
Singh
Ms. Monika
Chhabra
Mr. Pankaj Vij
Ms. Anuradha
Handa
Mr. Amit Kumar
Ms. Tripti Gandhi
Ms.Dipinti Gill
Mr. Ankit Mehra
29
Mr. Deepak Sharma
2
14
15
16
17
18
19
20
21
22
23
Designation
AO
B.Tech in CSE
Diploma in Mechanical Engineering,
CAD/CAM
Diploma in Mechanical Engineering
Department/
Section
Admin
1 year
12 year 4 months
1 year 10 month
UG
PG
B.A., Diploma in
Computers, Dip. In
Accounts & Mgt
M.A. (Pol. Sc.)
Clerk
Admin
Office Executive
Receptionist
Receptionist
Field Officer
Accounts Officer
Cashier
Accountant
Admin
Admin
Admin
Admin
Accounts
Accounts
Accounts
Accounts Assistant
Dy. Director
CCPC Executive
LEC. & Manager
Industry Interface
Accounts
CCPC
CCPC
B.A
B.A.& B.Ed.
BA
10th
B.Com
10+2
B.Com
Dip in Comp.
Accountant, B.A
BA, PGDCM
BCA
CCPC
B.Tech
Sanitary Supervisor
Purchase Officer
Civil Wing
Civil Wing
BA
10+2
Maintenance Incharge
Civil Wing
Under Graduate
Sr. Civil Engineer
Civil Supervisor
Civil Wing
Civil Wing
Dip. In Civil Engg.
Graduate
Store Officer
Electrical Supervisor
Civil Wing
Civil Wing
Dy. Estate Officer
Civil Wing
BA
BA
Graduation (Military),
FSC
A.P.
Project officer
Counseling
Counseling
BCA
Hostel warden
Hostel Supdt.
HR Coordinator
Operation Executive
Office Executive
Hostel
Hostel
HR
HR
HR
International
Affairs
B.A.
10+2
B.Sc. (Eco.)
B.com
BCA
MBA
M.com
MCA
B.Pharmacy
MBA
Director
M.Sc
M.com
MBA
MCA
M.Tech & MBA
(Pursuing)
MBA
MBA
30
31
Ms. Meenu Dhall
Ms. Aarti Sharma
Assistant Librarian
Library Assistant
Library
Library
32
Ms. Sarabjit Kaur
Ms. Poonam
Virmani
Library Restorer
Library
Librarian
Library
Assistant Librarian
DPE
Gym Instructor
Office Executive
Asst. Registrar
Library
Sports
Sports
Student Section
Student Section
BA, B. Lib.
BA
10+2
B.A.
B.A B.Ed
Clerk
Transport officer
Transport Asst.
Security supervisor
Office Executive
Student Section
Transport
Transport
Transport
Transport
B.A.
Diploma & B.A.
33
34
35
36
37
38
39
40
41
42
43
Ms. Anu Bala
Mr. Satpal
Mr. Ravi Kumar
Ms. Geeta Sharma
Mr. Manoj Kumar
Mr. Ram Milan
Yadav
Mr. Kuldeep Singh
Mr. Pal Singh
Mr. Rashpal Singh
Mr. Gurpreet Singh
B.Lib.
Dip in Lib.
Dip in Lib., Dip in
System Mgt., B.A
M.Com
M.Lib &IS, Ph.D
(Pursuing)
M.Lib., PGDCA,
PGDLAN
M.A M.Ed
M.A.
B.Sc, M.Sc, M.C.A
15. Qualifications of teaching faculty with DSc/D.Litt/Ph.D/MPhil/PG:
Sr.
No.
1
2
3
4
Dr. Sumit Jain
Prof. Gurudutt Sahni
Dr. P.C. Maity
Dr. Mandeep Kaur
5
Dr. Amandeep Bains
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Name
Graduate
Post Graduate
Mr. Rahul Joshi
Mr. Harjit Singh
Mr. Jatinder Kumar
Mr. Amandeep Singh
Mr. Akashdeep Goel
Mr. Harpreet Singh
Mr. Anuraj Singh
Mr. Satbir Singh Saini
Mr. PunitSarwal
Mr. Manpreet Singh
Mr. Sanjeev Kumar
Mr. Gurpreet Singh
Mr. Mandeep Singh
Mrs. Jasmeen Kaur
Mr. Rupinder Singh
Mr. Amninder Singh
Mr. Varinder Singh
Mr. Vikas Kumar
B. Tech. ME
B. Tech. ME
B. Tech. ME
B.Sc. (Chem)
B.Sc
( Physics)
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
Mr. Mandeep Kumar
B. Tech. ME
M. Tech
M. Tech
M. Tech
M.Sc (Chem)
M.Sc
( Physics)
M. Tech. Production
M. Tech. Industrial
M. Tech. Production
M. Tech. ME
M. Tech. ME
M. Tech. ME
M. Tech. Industrial
M. Tech. Production
M. S
M. Tech. Production
M. Tech. Production
M. Tech. ME
M. Tech. ME
M. Tech. ME
M. Tech. Production
M. Tech. Production
M. Tech. Thermal
M. Tech. CAD/CAM
M. Tech.
Manufacturing
Doctorate/Research
degree
Ph.D
Ph.D
Ph.D
Ph.D
Ph.D ( Physics)
Ph. D Pursuing
Ph. D Pursuing
Ph. D Pursuing
Ph. D Pursuing
Ph. D Pursuing
Ph. D Pursuing
-
25
26
27
28
Mr.Harkirat Singh
Mr. Surinder Singh
Mr. Harjaskirat Singh
Mr. Harpreet Singh Bedi
B. Tech. ME
B. Tech. ME
B. Tech. ME
B. Tech. ME
29
Mr. Amanpreet Singh
B. Tech. ME
30
31
32
Mr. Vikram Singh Jamwal
Mr. Palwinder Singh
Ms. Rimple
B. Tech. ME
B.Sc. (Maths)
B.Sc
33
Ms. Jaskiran Kaur
B Sc.(Medical)
34
35
Ms. Binu Bhanot
Ms. Rashmi
B.Sc. (Chem.)
B.Sc.
M. Tech. ME
M. Tech. Production
M. Tech. Production
M. Tech. ME
-
M. E (Thermal
M. E. (Thermal)
M.Sc. (Maths)
M.Sc.
MBA (Finance and
Marketing)
M.Sc. (Chem.)
M.Sc ,B.Ed
M.Phil
M.Phil
-
1 6 . Number of faculty with ongoing projects from:
a . National: No
b . International funding agencies: No
c . Grants received:
i.
Received grant from PTU to conduct International Multi-Track Conference on Sciences,
Engineering and Technical Innovations (IMTC 14) on 22nd –23th May, 2015
ii.
Received grant from DST to conduct International Multi-Track Conference on Sciences,
Engineering and Technical Innovations (IMTC15) on 3rd – 4th June, 2014
iii.
Mr. Anuraj Singh got approval of a grant of Rs.60,000 from DST for attending
international conference in USA
iv.
Received grant of Rs. 30,000 from PTU to conduct One day National seminar on
“EmergingTrends in Mechanical Engineering” on March 8, 2013.
v.
Received a grant of Rs 1.80 lakhs from AICTE to conduct Two Days National Conference
Entitled under RAME on 12-13 Dec 2013 Organized by Department of Mechanical
Engineering, CTIEMT
17. Departmental projects funded by DST-FIST; UGC, DBT, ICSSR, etc. and total grants received
a. International Multi-Track Conference on Sciences, Engineering and Technical Innovations (held
on 22nd - 23rd May, 2015) received a grant of 50,000/- from ISRO and 70,000/- from PTU,
Jalandhar
b. International Multi-Track Conference on Sciences, Engineering and Technical Innovations (held
on 3rd – 4th June, 2014) received a grant of 1,25,000/- from DST & 60,000/- from companies/
business organizations
c. Mr. Anuraj Singh got approved a grant of Rs.60,000 from DST for attending international
conference in USA
18. Research Centre/facility recognized by the University
a. Institute is recognized as ‘PTU Regional Centre’ to offer M. Tech. ME ( Regular & Part-time) &
Ph.D. course work.
b. Center of excellence in association with Siemens has been established in the department for
providing a platform for latest software (SOLID EDGE) training to the students of Mechanical
Engineering Department.
c. Research facility with latest CAD and simulation tools such as ‘SOLIDEDGE ST2’, ‘ANSYS
16.1’, ‘Inventor 2015(AutoDesk)’ is established.
d. Subscription to online research libraries/networks viz. ‘K Nimbus’ ‘IEEE Xplore’, ‘Science
Direct’ and ‘DELNET’ is being provided.
e. M.O.U with NIT-Jalandhar & NIT-Hamirpur for exchange of student/faculty and academic
published material; collaborative research projects and for organizing cosponsored/jointlyorganized seminars, conferences & workshops.
f. Online access to various research databases & Anti-plagiarism tool ‘Turnitin’ is being provided
by PTU to all the faculty members
19. Publications:
A) By Faculty:
a. Publications detail per faculty:
YEAR 2015:
S. No
1
2
3
Faculty name
Dr. Gurudutt
Sahni
Dr. Mandeep
Kaur
Mr. Harjit
Singh
4
Mr. Mandeep
Singh
5
Mr. Sanjeev
Kumar
6
Mr. Vikas
Kumar
7
Mr. Vikram
Singh
Jamwal
Mr. Varinder
Singh
Details of Paper (Title, co-authors, journal name, volume, page
no, year)
Gurudutt Sahni, Balpreet Singh and Swarndeep Singh “The Effect of
Thermal Stresses on Gate Valve and its Optimization using New Wedge
Design” published in Proceedings of International Conference : IMTC2015 , May 22-23,2015 , CTIEMT Jalandhar
Gurudutt Sahni, Balpreet Singh and Swarndeep Singh “Performance
Techniques for Operability of Regulating Globe Valve And its
Functioning” published in Proceedings of International Conference :
IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar
Mandeep Kaur and Amjad Ali “Alkali metal Impregnated Nickel Oxide:
Novel Green Nano Catalyst for Biodiesel Production” European Journal
of Lipid Science and Technology, 117, 550-560, 2015
Harjit Singh , Jatinder Kumar, and Rahul Joshi, ”Mechanical
Characterization of Natural Fiber Composites : An Experimental
Approach” published in Proceedings of International Conference : IMTC2015 , May 22-23,2015 , CTIEMT Jalandhar
Harjit Singh, Anish Sachdeva, Gurpreet Kaur “Benchmarking Internal
Supply Chain performance: Development of a frame work” International
Journal of Mechanical Engineering and Technology (IJMET) Volume 6,
Issue 6, June 2015, pp. 119-126.
Mandeep Singh , Sikandar Singh and Varinder Singh ”Effect of Weld
Groove Volume on Tensile Performance of Gas Tungsten Arc welded
Martensitic Stainless Steel” published in Proceedings of International
Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar
Sanjeev Kumar, Nirmal Singh Kalsi, Amandeep Siingh and Manpreet
Singh ”Comparison of Tool Tip Temperature and Cutting Forces using
Uncoated and AlCrN single layer coated cutting tool Inserts in Turning”
published in Proceedings of International Conference : IMTC- 2015 , May
22-23,2015 , CTIEMT Jalandhar
Vikas Kumar, Paramjit Singh ”Effect of Titanium Abrasive Mixed
Electrical Discharge Machining on Wear Ratio of AISI P20 Steel”
published in Proceedings of International Conference : IMTC- 2015 , May
22-23,2015 , CTIEMT Jalandhar
Vikram Singh Jamwal , Amanpreet Singh, and Pawanjot Singh
”Thermal Comfort Model of a Desert Cooler” published in Proceedings of
International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT
Jalandhar
Varinder Singh , Mandeep Singh and Nishant Bhardwaj “Performance
Investigation of Solar Air Heater Duct having square protrusions as
Roughness Geometry ” published in Proceedings of International
Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar
Metrics
No. of
citations
--
--
--
--
I.F.= 2.266
2
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Number of papers published in peer reviewed journals (national /international) by faculty for t h e
y e a r 2 0 1 5 : 02
YEAR 2014:
S. No
1
2
3
Faculty name
Dr. Mandeep
Kaur
Mr. Jatinder
Kumar
Mr. Satbir
Saini
4
Mr. Manpreet
Singh
5
Mr. Sanjeev
Kumar
6
Mr. Mandeep
Singh
7
Prof. Gurudutt
Sahni
8
Mr. Surinder
9
Mr. Anuraj
10
Singh
Singh
Mr. Vikas
Kumar
Details of Paper (Title, co-authors, journal name, volume, page
no, year)
Mandeep Kaur, Amzad Ali, “Trans estrification of waste cottonseed oil
using KF Impregnated CaO/NiO as reusable solid catalyst: Reusability
and Kinetics”, published in European Journal of Lipid Science and
Technology, 116. 80-88, 2014.
Mandeep Kaur, Amzad Ali, “Ethanolysis of waste cottonseed oil over
lithium impregnated calcium oxide: Kinetics and Reusability studies”,
published in Renewable Energy, 63. 272-279, 2014.
Jatinder Kumar, Rahul Joshi, “Determination of optimum cutting
parameters for surface roughness and tool flank wear in hard turning by
Taguchi method”, published in International Journal of Research in
Mechanical Engineering, Vol 4, issue 1, April 2014.
Nischal Chhabra, Surinder Kumar, Jatinder Kumar, “A Review of
Effect of Shielding Gases on Mechanical Properties of Low Carbon Steel
in GMAW Process.” published in Proceedings of Internationional
Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
Jatinder Kumar, Harjit Singh, Rahul Joshi, “Optimization of multiple
performance characteristics in EDM using Taguchi Method: An
Experimental Investigation”, published in Proceedings of International
Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
Amandeep Singh Virdi, Satbir Singh saini, “Selecting s best parameters
forr manufacturing motor cycle axle using multi criteria decision
technique(VIKOR Method AHP)”, IJESRT, 2014
Satbir Singh Saini, Harwinder Lal, Sumit Nagar, “Comparative study of
external supply chain performance of FMCG firms using multi criteria
decision technique (VIKOR Method)” IJAEST, 2014
Manpreet Singh, Amandeep Singh Bansal, Sanjeev Kumar, “The Effect
of different wire electrodes on the MRR and MS work piece using
WEDM Process” IJMET,Vol 5,Issue5, May 2014.
Sanjeev Kumar , Manpreet Singh , Amandeep Singh,”Recent
Development in PVD Coatings for High Performance Cutting Tools- A
Review.” published in Proceedings of International Conference: IMTC 2014, 3-4 June 2014, CTIEMT, Jalandhar .
Mandeep Singh, Sikandar Singh, “Effect of Heat Input and Post Weld
Heat Treatment on the Mechanical Properties of GTA Welded AISI 410
SS Joints 178-180 published in Proceedings of International Conference:
IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
Gurudutt Sahni, Balpreet Singh,“To Investigate Stresses and
Deformation Analysis in Skeletomuscular Regions While Sitting
Positions using FEM” published in Proceedings of International
Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
Surinder Singh, Poster presentation on
“WORK POSTURE
ASSESSMENT IN FORGING INDUSTRY BY REBA METHOD”
published in Proceedings of International Conference: IMTC -2014,
3-4 June 2014, CTIEMT, Jalandhar
Anuraj Singh, Paper presented “Ergonomic Investigation of muscular
skeleton disorder in small scale Indian Industry.” In 17 th Annual
ergonomic conference 2014, March 24-27, 2014, USA.
Vikas Kumar, Paramjit Singh, Gaurav Tejpal “A Review of various
Techniques to improve MRR in Sinking Electrical Discharge Machining”
published in Proceedings of National Conference on Latest Development
in Science , Engineering & Management, 28-29 March 2014, ACET,
Amritsar
Metrics
No. of
citations
IF: 2.266
3
IF: 2.989
3
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
---
---
--
--
--
--
--
--
Number of papers published in peer reviewed journals (national /international) by faculty for t h e
y e a r 2 0 1 4 : 06
YEAR 2013:
S. No
1
2
Faculty name
Dr. Mandeep
Kaur
Mr. Jatinder
Kumar
Details of Paper (Title, co-authors, journal name, volume, page
no, year)
Mandeep Kaur, “published in proceedings of International conference:
Bioenergy, Environment and Sustainable Technologies, 2013, Arunai
Engineering college, Tiruvanamalai, Tamilnadu.
Mandeep Kaur, “published in proceedings of 6th workshop on Fats and
oils as Renewable Feed Stock for the chemical industry, 2013, KIT
Karlsruhe, Germany.
Jatinder Kumar, Rupinder
Singh,”investigating the effect of
vulcanization in tread rubber aqpplications” Material Science forum,
Switzerland, Vol 751, pp 1-7, 2013
Amit Sharma, Himanshu Tripathi, Jatinder Kumar,”analysis of chnage
of mechanical properties in low alloy steel (similiar to a AISI 8740)
friction welded with inconel 718 after heat treatment” IJAET, Vol 4
,issue 1, 2013
Himanshu Tripathi, Dinesh kumar, Jatinder Kumar,” study of 3D crank
mechanism using asdvance modeling and anlysis technique” Arni
International Journalanagement science and Technology, 2013
Nimo Singh Khundrakpam, Jatinder Kumar and Gurinder Singh Brar,
“Effect of process parameters on MRR of Wire EDM for EN-8 Steel”
Published in Proceedings of National Conference: RAME -2013, 12-13
December 2013, CTIEMT, Jalandhar
Metrics
No. of
citations
--
--
--
--
--
--
--
--
--
--
--
--
3
Mr.
Amandeep
Singh
Amandeep Singh, Sanjeev Kumar, Manpreet Singh, ”Free transverse
analysis of uniform beam using MATLAB” Published in Proceedings of
National Conference: RAME -2013, 12-13 December 2013, CTIEMT,
Jalandhar
--
--
4
Mr.
Amanpreet
Singh
Amanpret Singh, Sumit Sharma, T.K. Jindal,” Experimental Study of
horizontal ground heat exchanger” IJMSCE Vol 2, issue 3, 2013
--
--
5
Mr. Mandeep
Singh
--
--
--
--
--
--
--
--
--
--
--
--
6
Mr. Harjit
Singh
7
Mr. Satbir
Singh Saini
8
Mr. Gurpreet
Singh
Mandeep Singh, Gurpreet Singh “Effect of Weld Groove Volume on
Tensile Performance of Gas Tungsten ArcWelded Martensitic Stainless
Steel (AISI 410 SS) Joints”. Published in Proceedings of National
Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar
Harjit Singh, Jatinder Kumar, Harbir Singh, “ A Framework for
Benchmarking Internal Supply Chain Performance” Published in
Proceedings of National Conference: RAME -2013, 12-13 December
2013, CTIEMT, Jalandhar
Harbir Singh, Harish Kumar, Harjit Singh, “Study of the
musculoskeletal disorders among truck drivers of transport industry in
punjab, india”. Published in Proceedings of National Conference: RAME
-2013, 12-13 December 2013, CTIEMT, Jalandhar.
Harjit Singh, Arvind Bhardwaj “Bench |Marking internal supply chain
performance using financial data” international conference on production
and industrial engineering at NIT Jalandhar 2013.
Amandeep Singh Virdi, Satbir Singh Saini, Amit Sharma, “Selection for
Best Parameter for Raw Material of an Axle in Motorcycle Using AHP
and Multi Criteria Decision Technique [VIKOR Method]”. Published in
Proceedings of National Conference: RAME -2013, 12-13 December
2013, CTIEMT, Jalandhar.
Gurpreet Singh, Mandeep Singh, “Ultrasonic Guided Waves for
Damage Detection in Cylindrical Geometries for Torsion Damages”
Published in Proceedings of National Conference: RAME -2013, 12-13
December 2013, CTIEMT, Jalandhar.
9
Rahul Joshi, Simeranpreet Singh Gill and Jatinder Kumar “Mechanical
and physical properties of natural rubber and its blend – a review”
Published in Proceedings of National Conference: RAME -2013, 12-13
December 2013, CTIEMT, Jalandhar
Seema, Darshan Kumar jindal, Rahul Joshi “ Supplier selection and
evaluation : a must for industry” higher education in india: the changing
facet, 2013
Rahul Joshi, Dr. Simranpreet singh Gill, “ effect of vulcanization process
parameters on mechanical and physical properties of vulcanized SBR 1502 rubber blend” International conference om AFTMME 2013.
Mr. Rahul
Joshi
--
--
--
--
--
--
10
Mr. Surinder
Singh
Surinder Singh “A Proposed REBA on Small Scale Forging Industry”
International Journal of Modern Engineering Research Vol. 3, Issue. 6,
Nov - Dec. 2013 pp-3796-3802
--
--
11
Mr. Harpreet
Singh
Harpreet Singh “Improvement In The Corrosion Rate And Mechanical
Properties Of Low Carbon Steel Through Deep Cryogenic Treatment”
International journal of scientific & technology research volume 2, issue
6, June 2013.
--
--
Number of papers published in peer reviewed journals (national /international) by faculty for the year
2013: 05
YEAR 2012:
S. No
1
Faculty name
Mr.
joshi
Details of Paper (Title, co-authors, journal name, volume, page
no, year)
Metrics
No. of
citations
--
--
Rahul Rahul Joshi, Dr. Simarpreet Gill, “ Optimization of vulcanization in
wind shield weather rubber strip application” IJAET, vol 3, issue 4, 2012
Number of papers published in peer reviewed journals (national /international) by faculty for the
year 2012: 01
Total Number of publications per faculty:
S.No
Name
1
Prof. Gurudutt Sahni
2
Dr. Mandeep Kaur
3
Mr. Rahul Joshi
4
Mr. Harjit Singh
5
Mr. Jatinder Kumar
6
Mr. Amandeep Singh
7
Mr. Harpreet Singh
8
Mr. Anuraj Singh
Total no. of publications*
Number of papers published in
peer reviewed journals
(national / international)
2015
2
2014
1
2013
0
2012
0
2015
0
2014
0
2013
0
2012
0
1
2
2
0
1
2
0
0
0
0
3
1
0
0
0
1
2
0
3
0
1
0
0
0
0
3
4
0
0
1
3
0
0
0
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
1
0
0
0
0
0
0
9
Mr. Satbir Singh Saini
10
Mr. Manpreet Singh
11
Mr. Sanjeev Kumar
12
Mr. Gurpreet Singh
13
Mr. Mandeep Singh
14
Mr. Amanpreet Singh
15
Mr. Surinder Singh
16
Mr. Vikas Kumar
17
Mr. Vikram Jamwal
18
Mr. Varinder Singh
TOTAL
0
2
1
0
0
2
0
0
0
1
0
0
0
1
0
0
1
1
0
0
0
0
0
0
0
0
1
0
0
0
0
0
1
1
1
0
0
0
0
0
0
0
1
0
0
0
1
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
10
13
19
1
2
6
5
1
Publications by students:
S. No.
Student Name
Batch
Total No. of publications
1
Mr. Shubham Sharma
2011
01
2
Mr. Sahil Arora
2011
01
3
Mr. Rohit Guleria
2011
01
Details of Publications of Students:
1. Shubham Sharma, Amandeep Singh and Mandeep Kuar “Some Studies on Investigating the concept and
Challenges of Green Tribology in Automobile Industry” , IMTC-15, ISBN: 978-81-929077-3-4 (print
version), pp.62-66, 2015
2. Sahil Arora and Rohit Guleria “Solar Sorption Refrigeration Methods ( An Overview of Modern
techniques)” IMTC-15, ISBN: 978-81-929077-3-4 (print version), pp.70-72, 2015
a. Number of publications listed in International Database (For Eg: Web of Science, Scopus,
Humanities International Complete, Dare Database - International Social Sciences
Directory, EBSCO host, etc.): 12
b. Monographs: NIL
c. Chapter in Books: NIL
d. Books Edited: NIL
e. Books with ISBN/ISSN numbers with details of publishers: NIL
f. Citation Index & h-index:
S. No
Faculty Name
Cited By
h-index
1
Dr. Mandeep Kaur
08
02
20. Areas of consultancy and income generated: No
21. Faculty as members in
S. No
1
2
Name of Faculty
Member
Rahul Joshi
Harjit Singh
National Committee
International
Committee
-
ISTE
ISTE
Editorial Board
-
22. Student projects:
a. Percentage of students who have done in-house projects including inter
departmental/programme: 100% (part of curriculum)
b. Percentage of students placed for projects in organizations outside the institution i.e.in
Research laboratories/Industry/ other agencies: 100% (part of curriculum)
23. Awards/Recognitions received by faculty and students:
a. 5 students of Mechanical Engineering department received a cash prize of Rs 50,000/- as a Best
Model Award for all categories to their Project HYBRID BIKE in INNOTECH 2012 by Puspha
Gujral Science City, Kapurthala under Registration Number A/E/23.
b. Following students won Best Model Award
S.No
1
Roll No
81406114020
Name
Mr. Harsimrat Singh
Class
ME
Sem
8
Batch
2008
2
81406114023
Mr. Kanwarpal Singh
ME
8
2008
3
81406114042
Mr. Sukjinder Singh
ME
8
2008
4
81406114015
Mr. Gurinder singh
ME
8
2008
5
81406114025
Mr. Lakhinder Singh
ME
8
2008
6
81406114028
Mr. Manpreet Singh
ME
8
2008
Remarks
Best Model Award
c. List of achievers in youth festivals:
S.No
1
2
Roll No
Name
1241147
Mr. Mahesh
Jangir
ME
6
1141579
Mr. Jasjit Singh
ME
Mr. Damanjit
Singh
Mr. Lakshaya
1282664
3
4
1282673
Class
Sem
Batch
Event
Remarks
2012
Fine Arts
2nd position in National Youth
Festival 2015 of All India
Universities held at Indore
7
2011
Group Shabad
2nd position in PTU Zonal
Youth Festival 2014.
ME
7
2011
Group Shabad
2nd position in PTU Zonal
Youth Festival 2014.
ME
7
2011
Play
2nd position in PTU Zonal
Kumar
1282664
Mr. Damanjit
Singh
ME
7
2011
Vaar Singing
Mr. Mahesh
Jangir
ME
5
2012
Fine Arts
Mr. Lakshaya
Kumar
ME
5
2011
Play
Mr. Ranjeet
Singh
ME
5
2011
Bhangra
Mr. Jasjit Singh
ME
5
2011
Indian Music
Mr. Damanjit
Singh
ME
5
2011
Indian Music
5
6
7
8
Youth Festival 2014.
1241147
1282673
1141631
1141579
9
1282664
10
11
12
1241147
1241211
Mr. Mahesh
Jangir
ME
Mr. Gurpreet
Singh
ME
3
3
2012
Fine Arts
2012
Literary
2nd position in PTU Zonal
Youth Festival 2014
1st position in PTU Zonal
Youth Festival 2014.
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU Inter Zonal
Youth Festival 2013.
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU inters zonal
Youth Festival 2013.
2nd position in PTU Zonal
Youth Festival 2012.
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU inters Zonal
Youth Festival 2013.
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU inters Zonal
Youth Festival 2013.
2nd position in PTU Zonal
Youth Festival 2012.
2nd position in PTU inters zonal
Youth Festival 2012.
1st position in PTU Zonal
Youth Festival 2013.
2nd position in PTU inters zonal
Youth Festival 2013.
2nd position in PTU Zonal
Youth Festival 2012.
d. List of achievers in University Merit
S.No
Roll No
Name
Class
1
1141647
Mr. Shubham Sharma
2
1182406
Mr. Deepak Kochhar
3
1307325
Mr. Amit Kumar Singh
4
1307356
Mr. Sourav
5
1307357
Mr. Sukhdev Singh
6
1307355
Mr. Simranjit Singh
ME
ME
AUE
AUE
AUE
AUE
Sem
Batch
6th B
2011
7th
2010
3rd
2013
3rd
2013
3rd
2013
3rd
2013
%age
Position
86%
4th
86.2%
74.35%
73.29%
67.76%
67.65%
4th
2nd
4th
9th
10th
e. List of achievers in PTU Inter College Sports meet
S. No.
Roll No.
Name
Class
Sem
Year
Position
1
100221129273
Mr.VivekBhati
ME
3rd
2011
Silver
2
100221129273
Mr.VivekBhati
ME
5th
2012
Bronze
Event
Cross
Country
Cross
Country
3
100221129273
Mr.Vivek Bhati
ME
7th
2013
Bronze
4
100221129294
Mr.Ishant Diwedi
ME
7th
2013
Bronze
5
1184801
Mr.Nikhil Choudhary
ME
7th
2013
Bronze
6
100221129278
Mr.Geetansh Aggarwal
ME
7th
2013
Bronze
7
1141601
Mr.Kailash Chand
ME
5th
2013
Bronze
8
1291204
Mr.Gagandeep Singh
ME
3rd
2013
Bronze
9
100221129299
Mr.Ravi
ME
7th
2013
Bronze
10
1407870
Mr.Lalhmingsanga
ME
1st
2014
Gold
Cross
Country
Cross
Country
Cross
Country
Cross
Country
Cross
Country
Cross
Country
Cross
Country
Basketball
11
1241183
Mr.Amarjot Singh
ME
5th
2014
Gold
Basketball
12
1407924
Mr.Harjinder Singh
ME
3rd
2014
Gold
Basketball
13
1407869
Mr.Kulwinder Singh
ME
1st
2014
Gold
Basketball
14
1241173
Mr.Abhishek Singh
ME
5th
2014
Gold
Basketball
15
1241204
Mr.Gagandeep singh
ME
5th
2014
Silver
Cross
Country
16
1241642
Mr.Shamsher Singh
ME
5th
2014
Silver
Cross
Country
f.
S.No
7 students of ME won top positions in “National Student symposium - Managing Innovations in
science & Technology” held at CTIEMT on March 30th – 31st 2015
Name of Student
University
Roll
Event
Position/Award
No.
1
2
3
4
5
6
7
Mr. Sahil Arora
Mr. Rohit Guleria
Mr. Gurpreet Singh
Mr. Amandeep
Mr. Prateek
Mr. Kailash Rawat
Mr. Deepak Kumar
1141638
1141635
1241211
1241182
1307475
1307885
1241197
Paper Presentation
Paper Presentation
Paper Presentation
Paper Presentation
Paper Presentation
Poster Presentation
Poster Presentation
Best Paper
Best Paper
1st
1st
2nd
1st
1st
24. List of eminent academicians and scientists/visitors to the department:
Sr.
No.
Eminent
Academicians and
Scientists / Visitors
to the Department
Designation
University/Institution
Professor
IIT, Roop Nagar
Purpose

1
Dr. Harpreet Singh


2
Dr. R.K. Garg
Professor
NIT Jalandhar

Expert talk in two days AICTE
sponsored national conference
“RAME-2013” on 12-13 December
2013.
Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
Expert talk in two days AICTE
sponsored national conference
“RAME-2013” on 12-13 December
2013.
Session Chair in international
conference “IMTC 14” on 3-4 June
2014.

3
Dr. L.P Singh
Professor
NIT Jalandhar
3
Dr. Subhash Chander
Professor
NIT Jalandhar




5
Dr. Jagdev Singh
Professor
BCET Gurdaspur

6
7
Dr. Darshan Kumar
Associate
Jindal
Professor
Dr. Simranpreet Singh
Assistant
Gill
Professor
8
Dr. Tajeet Singh
9
Dr. S. S. Sandhu
10
Dr. Niraj Bala
11
Dr. Ranjit Singh
Associate
professor
Assistant
Professor
Assistant
Professor
Associate
Professor
Session Chair in international
conference “IMTC 15” on 22-23
June 2014
Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
Expert talk on “Computational Fluid
Dynamics (CFD)”
As a mentor for the subjects “HT,
RAC and MV”.
Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
Session Chair in international
conference “IMTC 15” on 22-23
June 2014

As mentor for the subjects “Fluid
Mechanics and Fluid Machinery”

Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
SBSCET, Ferozepur

As mentor for the subject “Strength
of Material”
NIT Jalandhar

Session Chair in “IMTC 14” on 3-4
June 2014.
BBSBEC, Fathegar Sahib

Session Chair in national conference
“IMTC 14” on 3-4 June 2014.

Expert talk on “Energy and
Environment” in International
Conference “IMTC15” on 22nd-23rd
May 2015
BCET Gurdaspur
BCET Gurdaspur
BCET, Gurdaspur
25.
Seminars/Conferences/Workshops organized & the source of Funding
a) National
a. Wipro sponsored FDP on “Faculty Empowerment Program” under Wipro Mission 10 x (Level I),
held from March14-18, 2011.
b. Wipro sponsored FDP on “Wipro Mission 10 X Certification Program (Level II) held from March
26-27, 2012.
c. PTU Sponsored One day national seminar on “Emerging Trends in Mechanical Engineering”
on March 8, 2013.
d. AICTE Sponsored Two Days National Conference Entitled under “Recent Advances in
Mechanical Engineering” RAME (12-13 Dec 2013) Organized by Department of Mechanical
Engineering, CTIEMT.
e.
PTU sponsored national conference on “Higher education in India: The changing facets” held
at
CTIEMT, Jalandhar on 4 – 5th January 2013.
b) International
a. ISRO & PTU sponsored “International Multi track conference on Sciences, Engineering and
Technical Innovations” held on 22nd – 23rd May 2015
b. DST sponsored “International Multi track conference on Sciences, Engineering and Technical
Innovations” held at CTIEMT on 3rd – 4th June, 2014
26.
Student profile programme/course wise:
Name of the Course/programme
(refer question no. 4)
Applications
received
BTECH-ME(2014 - 18)
77
BTECH-ME(2013 -17)
Enrolled
Selected
*M
*F
Pass
percentage
68
68
0
NA
70+56 LEET=126
69+46LEET=105
103
2
NA
BTECH-ME(2012 - 16)
93+51 LEET=144
88+46 LEET =134
134
0
NA
BTECH-ME(2011- 15)
85+29 LEET=114
81+23 LEET =104
101
3
NA
BTECH-ME(2010- 14)
74+25 LEET=99
69+23 LEET=92
92
0
67.39%
BTECH-ME(2009- 13)
89+ 18LEET=107
85+13 LEET=98
98
0
71.42%
BTECH-ME(2008- 12)
55+19 LEET=74
50+15 LEET=65
65
0
78.46%
BTECH- AE(2014 - 18)
25
22
22
0
NA
BTECH- AE(2013 - 17)
33+20 LEET=53
32+17 LEET=49
49
0
NA
MTECH-ME(2013 - 15)
6
5
5
0
NA
MTECH-ME(2014 -16)
4
4
4
0
NA
*M=Male *F=Female
27.
Diversity of Students
%of students from the
same state
% of students from
other States
% of students
from abroad
B.Tech. ME(2014)
80.30%
19.70%
-
B.Tech. ME(2013)
88.35%
11.65%
-
80.60%
19.40%
-
75.96%
24.04%
-
Name of the Course
B.Tech. ME(2012)
B. Tech. ME(2011)
B .Tech AE (2014)
B .Tech AE (2013)
95.45%
4.55%
-
79.6%
20.40%
-
100%
-
-
100%
-
-
M. Tech ME(2014)
M .Tech ME(2013)
28.
29.
30.
How many students have cleared national and state competitive examinations such as NET, SLET,
GATE, Civil services, Defense services etc.
Regd No.
Name
Batch
Remarks
1141595
Mr. Hemant Priyadarshi
2011-2015
Qualified GATE 2015
1141613
Mr. Manish Kumar
2011-2015
Qualified GATE 2015
100221129251
Mr. Lucky Bagga
2010-2014
100221129254
Mr. Mathew Samson
2010-2014
Qualified GATE 2014
Qualified GATE 2014
100221129283
Mr. Ashfaque Ahmad
2010-2014
Qualified GATE 2014
Student progression
Against % enrolled
2010-14
2009-13
Student progression
2011-15
UG to PG
7.7%
13.09%
9.18%
7.57%
PG to M.Phil.
NA
NA
NA
NA
PG to Ph.D.
NA
NA
NA
NA
Ph.D.to Post-Doctoral
NA
NA
NA
NA
Employed
•Campus selection
•Other than campus recruitment
32.03%
13.59%
30.95%
10.71%
25.51%
12.24%
28.78%
7.57%
Entrepreneurship/Self-employment
1.94%
1.19%
1.02%
0.00%
Details of Infrastructural facilities
2008-12
a)
Library
Trade
No of Title of
No of books
books
National
International
Journals
Journals
P/I
A/I
P/I
E-Journals
A/I
1.DELNET
ME
373
2392
2
2
2
2
2.Science Direct
3.K Nimbus
4. IEEE
b) Internet facilities for staff Internet is provided by Connect and dreamtel with data rate of 40mbps and in labs with
speed of 16kbps
and students
c) Total number of class rooms
- 9 well organized classrooms with pleasant ambience;
- Exclusive classroom for each section with seating capacity of 70 to 80;
d) Class rooms with ICT
-2 of the classrooms are equipped with ICT facility.
facility
- Following well established labs for first common courses are being used:
1)
2)
3)
4)
5)
Communication skills
Engineering Physics
Engineering Chemistry
Basic Electrical & Electronics Engineering
Fundamentals of computer programming & IT
- 21 well established labs are being used for the core subjects of ME, namely,
e) Laboratories
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Engineering Material and Metallurgy lab
Strength of Material lab
Applied Thermodynamics lab
Fluid Mechanics lab
Manufacturing processes lab
Theory of Machines lab
Computer Aided Design and Manufacturing lab
Mechanical Measurement and Metrology lab
Industrial Automation and Robotics lab
Automobile Engineering lab
Heat Transfer lab
Fluid Machinery lab
Refrigeration and Air Conditioning lab
Mechanical Vibration lab
Computer Graphics lab
Internal Combustion Engine lab
Automotive Chassis system lab
18.
19.
20.
21.
Automotive Electrical Systems lab
Vehicle Body Engineering lab
Automotive Transmission lab
Learning Resource Lab
In CG , CADCAM and Learning Resource lab are equipped with tools
AutoCAD2015, AutoCAD Mechanical 2015, Solid Edge ST2, ANSYS
16.1
31. Number of students receiving financial assistance from college, university, government or other
agencies
S. no.
Schemes provided by college/Other
Agencies
Number
of
students
(ME) 2014
B.Tech - AIEEE rank from 40,001 to
70,000 OR PCM marks > 80% upto
85% in 12th--50% tuition fee waiver
3
2
B.TECH- LEET (IT/EEE/EE/ECE )-25% Tuition Fee Waiver
NIL
3
B.Tech -AIEEE rank from 70,001 to
10,00,00 OR PCM marks 75% to
80% in 12th--25% tuition fee waiver.
3
1
Number
of
students
(ME) 2013
Number
of
students
(ME) 2012
Number
of
students
(ME) 2011
Number
of
students
(AUE) –
2014
Number of
students
(AUE) –
2013
3
NIL
Nil
Nil
3
NIL
NIL
NIL
Nil
2
3
5
Nil
Nil
1
NIL
Nil
Nil
1
Nil
13
4
Nil
2
Nil
Nil
1
Nil
NIL
3
9
3
Nil
4
NIL
4
B.Tech-AIEEE rank up to 40,000
OR PCM marks > 85% in 12th--100%
tuition fee waiver
5
CTians 25% tuition fee waiver for
any higher courses (if above 60%)
10
6
Employees Ward 25% Tuition Fee
Waiver ( If Above 60% )
NIL
7
OBC Post Matric Scholarship
(Punjab)
3
8
PTU Fee Waiver Scholarship
4
4
4
4
1
NIL
9
SC Post Matric Scholarship
(PUNJAB)
3
3
14
5
10
7
10
SC Scholarship Bihar 2013-14
NIL
Nil
Nil
Nil
Nil
5
11
Second brother/sister 25% tuition fee
concession.
2
1
2
Nil
1
1
1
32. Details on student enrichment programmes (special lectures / workshops / Seminar) with external
experts
a. An industrial visit to “Medhaavi Center for Automotive Research Hoshiarpur” is organized for
providing industrial exposure to students of B. Tech AUE 5 on 08th Aug, 2015.
b. Industrial visit of Mechanical Engineering students at Aarti International, Ludhiana on 06th Feb, 2015.
c. ACCEPT program is conducted by CCPC for students of all semesters to train them in various areas of
soft skills & aptitude
d. Industrial visit of Mechanical Engineering students at RCF Kapurthala on 23rd Feb, 2013 and 2nd March,
2014
e. Industrial visit of Mechanical Engineering students at Monte Carlo, Ludhiana on 03rd Nov, 2014
f. One day workshop on CRDi Technology by Medhavi Centre for Automotive Research on 7 January
2013.
g. “CADMANIA 13” contest to promote skills in computer aided design/drawing focusing on developing
2D/3D views of mechanical components/parts on 29 January 2013.
h. “CADMANIA 14” contest to promote skills in computer aided design/drawing focusing on developing
2D/3D views of mechanical components/parts on 16 October 2014.
i. Two Days National Student Symposium “MIST-15” on 30-31 March ,2015 to encourage the students
for innovations in Science and Technology and to provide the opportunity to discuss their work with
others.
j. Expert talk on “Computational Fluid Dynamics (CFD) by Dr. Subhash Chandra from NIT, Jalandhar.
k. Expert talk on RECENT ADVANCEMENTS IN MECHANICAL ENGINEERING WITH FOCUS ON
NTM by Dr. R. K. Garg (NIT Jalandhar) on 8th March,2013.
l. Expert talk on ROLE OF HUMAN FACTORS IN MECHANICAL ENGINEERING INDUSTRY by
Dr. L.P. SINGH (NIT Jalandhar) on 8th March,2013.
m. Expert talk on FUZZY LOGIC IN ENGINEERING SYSTEM by Dr .Jagdev Singh (BCET Gurdaspur)
on 8th March,2013.
n. Expert talk on CRYOGENIC TREATMENT OF CUTTING STEEL by Dr. Simranpreet Singh Gill
(BCET Gurdaspur) on 8th March,2013.
33.
Teaching methods adopted to improve student learning
a.
b.
c.
d.
e.
f.
g.
h.
34.
Before formal commencement of class room teaching, students are made to undergo ‘The Orientation
Programme’ in order to make them aware with:
1. Study Scheme
2. Curriculum Details
3. Key Position Holders
4. Anti Ragging Committee Members (Contact no. and Email ID’s)
5. Women Grievance Cell (Contact no. and Email ID’s)
6. Rules and Regulations of College.
The department makes its academic calendar for every academic session .This calendar is followed strictly to
meet every goal in time .The calendar is attached here with.
The Department provides college outlines and course schedules prior to the commencement of the academic
session. The schedule is as listed in the academic calendar.
B. Tech (Mechanical Engineering) predominantly follow the lecture method. Apart from classrooms ,the
Industrial visits are organized for the better experience of the students
The PDP (Personality Development Programs) are organized. Group Discussion, Role play events are organized
for the students for making learning more efficient.
Nimbus program is set up by the department to provide the teaching material to the students study anytime
anywhere through e- learning.
Advisers for each class are appointed to guide every student in every possible way, for the better growth of the
students.
All the teachers are evaluated by the students on basis of the teaching, way of interactions, and knowledge of the
teacher. After the results, required actions are taken.
Participation in Institutional Social Responsibility (ISR) and Extension activities

A Seven Days NSS Camp Was Organized at CT Institute of Engineering, Management & Technology in
Co-Ordination with PTU during 26/02/2013 To 04/03/2013. The main agenda of this camp was “Cancer &
7
8
Mr. Rahul Jasrotia
Mr. Ashwarya
1141629
1241194
9
10
11
12
13
Sharma
Mr.Gopal Kumar
Mr. Ishant
Mr. Sajan
Mr. Ashfaque
Ms. Drishti
100221129289
100221129294
100221129314
100221129283
1141582
22
23
24
25
26
27
Mr. Rahul Kumar
Mr. Ayushranjan
Mr. Mayank Kumar
Mr. Manish
Mr. Hemant
Mr. Sanchit
Mr. Ankit
Mr. Ritesh
Mr. Gurpreet
Mr. Jasbir
Mr.Guneet Singh
Mr. Richi
Mr. Geetansh
Mr. Vishal Sagar
100221129311
100221129284
1141988
1141613
1141595
1241559
1241518
1141634
1241212
1307634
1241208
1241246
100221129247
1307911
28
Mr. Sidharath
1241254
CTIEMT
14
15
16
17
18
19
20
21
Duration
with Dates
SEVEN DAYS
26TH FEB, 2013 TO 4TH MARCH, 2013
1241241
1241197
1241269
100221129315
100221129301
1141644
Theme of the Event
HEPATITIS & CANCER AWARENESS
Mr. Rahul Raj
Mr.Deepak Kumar
Mr. Zahid Iqubal
Mr. Sandeep
Mr. Manish Kumar
Mr. Shivam Kumar
Organizing
Institute/
Department
ENVIROMENTA
L AWARENESS
1
2
3
4
5
6
Activity
attended
CTIEMT
Name of the Student (with Registration
Number)
Name
Roll No
SEVEN DAYS NSS CAMP
S.
No.
7 DAYS NSS
CAMP

Hepatitis Awareness” in the villages near by Jalandhar.
More than 300 students participated in this camp; from CT Group of Institutions and different
institutions/colleges of Punjab.
Students of CT Institutions and various colleges affiliated to Punjab Technical University visited the nearby
village Pholariwal and made the villagers aware by street play at Pipal Chowk of village about the
destructive effects of drug addiction and told them how to prevent such damages under the aegis of Seven
Days NSS Camp On “Hepatitis And Cancer Awareness” organized by CT Group Institutions in
collaboration of Punjab Technical University, Kapurthala.
1308380
1241207
1353753
38
Mr. Ujjwal sagar
1307675
39
Mr. Jasbir Singh
Mr. Chandramani
1307634
36
40
1307619
42
Kumar
Mr. Devdeep
Bhanot
Mr. Ajay Kumar
43
Mr. Amandeep
1241182
44
Singh
Mr. Guneet Singh
1241208
41
45
47
Mr.Gurpreet Singh
Mr. Richi Singh
Mr. Ashwani
48
Kumar
Mr. Sahil Sood
46
49
50
51
52
53
54
55
35.
Mr. Shubham
Mr. Anmol Singh
Mr. Keshav Sharma
Mr. Rajinder Singh
Mr. Rahul Sharma
Mr. Puneet
Mr. Amritpal Singh
1241199
1241177
1241212
1241246
1307870
FIVE DAYS
OCTOBER 3 –
OCTOBER 7,
2013
37
Mr. Paramjit Singh
Mr. Gourav Sharma
Mr. Pardarpan
FIVE DAYS
SEPTEMBER 23 - SEPTEMBER 27, 2014
35
EDUCATIONAL
SURVEY
Mr. Ishant Diwedi
100221129256
100221129277
100221129247
100221129294
EDUCATION-AL SURVEY
34
100221129248
CTIEMT
31
32
33
Pangotra
Mr. Harmanpreet
Singh
Mr. Mohit Paul
Mr. Amit Kumar
Mr. Geetansh
30
CTIEMT
1182407
ASEREDUCATIONAL
CAMP
Mr. Gaurav
ASER-EDUCATIONAL CAMP
29
1241249
1307354
1307326
1307886
1307657
1241242
1241240
1241187
SWOC analysis of the department and Future plans
Strengths:
a.
b.
c.
d.
A very dedicated, dynamic and self motivated faculty and staff.
All faculties have excellent academic backgrounds.
Good infrastructural facilities including well equipped labs, library and IT facilities.
The Mechanical Engineering program combine classroom and laboratory learning in technical areas
with a broad curriculum and industry assignments to impart an Excellent Education.
e.
MOU with Texas Instruments
Weaknesses:
a.
b.
c.
A few students deficient in certain aspects like communication skills, poor academic and social
backgrounds.
Lack of awareness among students regarding current technology.
Students having a habit of being spoon-fed.
Opportunities:
a.
b.
c.
A good exposure and support to faculty for self development through FDPs, Seminars, STTPs etc
Motivation for research work (students as well as faculty).
Membership with technical bodies like ISTE etc.
Challenges:
a.
b.
c.
Competition due to mushroom growth of engineering institutes locally and globally.
Admissions of good quality and quantity of students.
Declining job opportunities for ME in the region.
Future plans of the department:
a.
b.
c.
d.
Improve the process of teaching and learning through continuous assessment.
Recruit, nurture and retain outstanding students and faculty.
Promote active learning as per Wipro mission 10X.
Focus more on research and other activities to resonate with the current wavelength of today’s fast
growing world.