1. science
2. engineering

Electronics and Communication Engineering Discipline
Science, Engineering and Technology School
Khulna University, Khulna-9208, Bangladesh
Admission Notice for M.Sc. Engg.(ECE)
Session: 2014-2015
Applications are hereby invited from eligible candidates in prescribed form for admission into full-time/part-time
M.Sc. Engg. program at the Electronics and Communication Engineering (ECE) Discipline under Science,
Engineering and Technology (SET) School of Khulna University for the session of 2014-2015, subjected to the
following qualifications and conditions.
1. Degree Offered
The Master’s Degree to be offered is “Masters of Science in Electronics and Communication Engineering,”
abbreviated as “M.Sc. Engg.(ECE).”
2. Admission Requirements
(a) For admission, an applicant must have result as follows:
Name of the examination
Required Division/Class or GPA
S.S.C. or equivalent
First Division or 3.00 (out of 5.00)
H.S.C. or equivalent
First Division or 3.00 (out of 5.00)
B.Sc. Engg.(ECE) or equivalent
2nd Class or 2.50 (out of 4.0)
(b) For admission, a candidate must have obtained:
Four years Bachelor Degree in Electronics and Communication Engineering (ECE), Electrical and Electronic
Engineering (EEE), Computer Science and Engineering (CSE) or its equivalent degree from any recognized
university/institution.
N.B.: Applicants can also apply using appeared certificate of B.Sc. Engg.(ECE) or equivalent degree.
3. Admission Procedure
A candidate may be required to appear at an oral and/or written test to be conducted by the Post Graduate
Admission Committee (PGAC) of ECE Discipline.
4. Duration of the Program
The minimum duration for completion of the M.Sc. Engg.(ECE) Program is one and a half academic year (three
terms).
5. Course Requirements
The requirement of credit hours to be earned by a student shall be as follows:
Name of the Degree
Minimum Credit Hours to be Earned
Theoretical
Thesis/Project
Total
Research Based
18
18
36
Coursework Based
30
6
36
M.Sc. Engg.(ECE):
6. An in-service candidate, if selected for admission, must submit proof of having obtained study leave or
deputation from the office of the candidate’s employer to the PGAC before he/she is admitted.
7. There shall be two categories of students, namely, full-time students and part-time students.
8. The maximum number of students to be admitted per academic year is 15.
Page 1 of 6
9. Application form can be collected from the office of the ECE Discipline or can be downloaded from the website:
<http://www.ku.ac.bd> and the application form is to be submitted to the Office of the Head of ECE Discipline
with a nonrefundable application processing fee of BD Tk. 1500/- (one thousand five hundred only) in cash.
10. Required Documents
An applicant must submit the following documents with the application form to the Office of the Head of ECE
Discipline.
(a) 2 copies attested passport size photos of the candidate
(b) Attested copies of the certificates and grade sheets/mark sheets/transcripts of all educational qualifications
(c) 2 letters of recommendation from two referees
11. Important Deadlines:
Description
Time and Date
Application Deadline
07-12-2014 to 08-01-2015
Publication of Eligible Candidates’ List
11-01-2015
Admission Test (written/oral)
12-01-2015 at 11:00 AM
Result Publication
13-01-2015
Admission
14-01-2015 to 15-01-2015
Class Start
18-01-2015
12. Contact: Dr. Md. Shamim Ahsan, Associate Professor, ECE Discipline, Khulna University
(Phone: +88-01675-328671).
Sd/(Prof. Dr. Mohammad Ismat Kadir)
Dean
Science, Engineering and Technology School
Khulna University, Khulna-9208, Bangladesh.
E-mail: iskadir@hotmail.com
Phone: +88-041-813250, +88-041-720171-3/1143
Fax: +88-041-731244
Page 2 of 6
Electronics and Communication Engineering Discipline
Science, Engineering and Technology School
Khulna University, Khulna
Admission Criteria for Master’s Degree Program
1. Degree Offered
The Master’s Degree to be offered is “Master of Science in Electronics and Communication Engineering,”
abbreviated as, “M.Sc. Engg.(ECE).”
2. Admission Requirements
(a) For admission, an applicant must have result as follows:
Name of the Examination
Required Division/Class or GPA
S.S.C. or equivalent
First Division or 3.00 (out of 5.00)
H.S.C. or equivalent
First Division or 3.00 (out of 5.00)
B.Sc. Engg.(ECE) or equivalent
2nd Class or 2.50 (out of 4.0)
(b) For admission, a candidate must have obtained:
Four years Bachelor Degree in Electronics and Communication Engineering (ECE), Electrical and Electronic
Engineering (EEE), Computer Science and Engineering (CSE) or its equivalent degree from any recognized
university/institution.
N.B.: Applicants can also apply using appeared certificate of B.Sc. Engg.(ECE) or equivalent degree.
3. Admission Procedure
A candidate may be required to appear at an oral and/or written test to be conducted by the Post Graduate
Admission Committee (PGAC) of ECE Discipline.
4. Duration of the Program
The minimum duration for completion of the M.Sc. Engg.(ECE) Program is one and a half academic year
(three terms).
5. Course Requirements
The requirement of credit hours to be earned by a student shall be as follows:
Name of the Degree
Minimum Credit Hours to be Earned
Theoretical Thesis/Project Total
M.Sc. Engg.(ECE):
Research Based
18
18
36
Coursework Based
30
6
36
6. An in-service candidate, if selected for admission, must submit proof of having obtained study leave or
deputation from the office of the candidate’s employer to the PGAC before he/she is admitted.
7. There shall be two categories of students, namely, full-time students and part-time students.
8. The maximum number of students to be admitted per academic year is 15.
9. Contact: Dr. Md. Shamim Ahsan, Associate Professor, ECE Discipline, Khulna University
01675-328671).
(Phone: +88-
Sd/(Prof. Dr. Mohammad Ismat Kadir)
Dean
Science, Engineering and Technology School
Khulna University, Khulna-9208, Bangladesh.
E-mail: iskadir@hotmail.com
Phone: +88-041-813250; +88-041-720171-3/1143; Fax: +88-041-731244
Page 3 of 6
ELECTRONICS AND COMMUNICATION ENGINEERING DISCIPLINE
SCIENCE, ENGINEERING AND TECHNOLOGY SCHOOL
KHULNA UNIVERSITY, KHULNA-9208, BANGLADESH
PASTE RECENT
PASSPORT SIZE
PHOTOGRAPH
Application Form for Admission into Master’s Degree Program
For office use only:
Session:
Reg. No.:
Roll No.:
The applicant will fill up: (Instruction: You should put a tick () mark where necessary)
Application for admission to M.Sc. Engg.(ECE): (i)  Research/ Course-work Based
1.
Applicant’s Name (Block Letter):
2.
Father’s Name:
3.
Mother’s Name
(ii)  Full-time/  Part-time Student
(a) Permanent Address:
(Include Mobile/Phone No.)
4.
(b) Present Address:
(Include Mobile/Phone No.)
5.
(a) Gender:  Male/  Female
(b) Religion:  Islam/  Hindu/  Others (Please specify__________________)
6.
(a) Place of Birth:
(District)
(b) Date of Birth:
(DD/MM/YY)
(c) Nationality:
Educational Qualifications:
Name of Examination
7.
Year of
Passing
Education Board/University
Name of the Institution
Division/
Class/GPA
SSC/Equivalent
HSC/Equivalent
B.Sc. Engg./Equivalent
Information of Two Referees:
8.
9.
(a) Name:______________________________________
Address:____________________________________
___________________________________________
___________________________________________
Mobile/Phone No.:____________________________
(b) Name:______________________________________
Address:____________________________________
___________________________________________
___________________________________________
Mobile/Phone No.:____________________________
Name of the Proposed Supervisor (Optional):
I do hereby declare that, all the information given above is true. For any false information, the application/admission will be cancelled.
_________________________
Applicant’s Signature with date
For office use only:
Recommendation for Admission:
____________________
Member-Secretary, PGAC
______________________
Chairman, PGAC
N.B.: Please be sure that the following documents are attached duly.
(i) All academic certificates and transcripts (Photocopy)
(ii) Two letters of Recommendation from two referees
Page 4 of 6
ELECTRONICS AND COMMUNICATION ENGINEERING DISCIPLINE
SCIENCE, ENGINEERING AND TECHNOLOGY SCHOOL
KHULNA UNIVERSITY, KHULNA-9208, BANGLADESH
Letter of Recommendation
SECTION A: (To be filled by the Applicant)
(Tick as applicable)
Name of the Applicant: _________________________________________________________________
Application for admission to M.Sc. Engg.(ECE):
 Research Based/  Course-work Based
 Full-time Student/  Part-time Student
Name of the Referee: ___________________________________________________________________
SECTION B: (To be filled by the Referee)
(Tick as applicable)
1. Please evaluate the applicant in the following areas.
Excellent
Good
Average
Below Average
Motivation
Integrity
Intellectual ability
Maturity
Diligence
Ability to work alone
Ability to work in a group
English proficiency
Academic ability
Creativity and originality
Applicant’s overall ability
2. How long have you known the applicant and in what capacity?
For ____________ years ____________ months and as  Undergraduate Student/  Graduate Student/
 Research Assistant/  Teaching Assistant/  Employee/  Others (Please specify__________________)
3. Do you think the applicant will successfully complete the program applied for?  Yes/  No
4. Do you recommend this applicant?
 Strongly Recommend/  Recommend/  Recommend with reservation/  Don’t recommend
5. Name of the Referee: __________________________________________________________________
Position: ____________________________________________________________________________
Organization: ____________________________________________________________________________
Mobile/Phone No.: ____________________________ E-mail: _________________________________
6. Signature of the Referee: ______________________________ Date: ____________________________
Page 5 of 6
ELECTRONICS AND COMMUNICATION ENGINEERING DISCIPLINE
SCIENCE, ENGINEERING AND TECHNOLOGY SCHOOL
KHULNA UNIVERSITY, KHULNA-9208, BANGLADESH
Letter of Recommendation
SECTION A: (To be filled by the Applicant)
(Tick as applicable)
Name of the Applicant: _________________________________________________________________
Application for admission to M.Sc. Engg.(ECE):
 Research Based/  Course-work Based
 Full-time Student/  Part-time Student
Name of the Referee: ___________________________________________________________________
SECTION B: (To be filled by the Referee)
(Tick as applicable)
1. Please evaluate the applicant in the following areas.
Excellent
Good
Average
Below Average
Motivation
Integrity
Intellectual ability
Maturity
Diligence
Ability to work alone
Ability to work in a group
English proficiency
Academic ability
Creativity and originality
Applicant’s overall ability
2. How long have you known the applicant and in what capacity?
For ____________ years ____________ months and as  Undergraduate Student/  Graduate Student/
 Research Assistant/  Teaching Assistant/  Employee/  Others (Please specify__________________)
3. Do you think the applicant will successfully complete the program applied for?  Yes/  No
4. Do you recommend this applicant?
 Strongly Recommend/  Recommend/  Recommend with reservation/  Don’t recommend
5. Name of the Referee: __________________________________________________________________
Position: ____________________________________________________________________________
Organization: ____________________________________________________________________________
Mobile/Phone No.: ____________________________ E-mail: _________________________________
6. Signature of the Referee: ______________________________ Date: ____________________________
Page 6 of 6