1. home and garden
2. home furnishings
3. sofas and chairs

Gynaecology,
Urology and Proctology
The perfect equipment
to meet all requirements
Catalogue no. 75, valid as of January 2015
The range of Schmitz products
for gynaecology, urology and proctology
®
medi-matic
Series 115
Examination and treatment chairs for gynaecology and
rectoscopy/proctology
Page4-15
Examination and treatment chairs for urology/urodynamics
Page 18-21
The Full HD Video Colposcope
Page16-17
arco
Examination and treatment chairs for gynaecology
Page22-27
Examination and treatment chairs for proctology
Page28-31
®
conzentrum
Modular cabinets with socle
®
conzentrum
plus
Wall-mounted modular cabinets without socle
Page 32-33 and 36-46
Page 34-37 and 47-51
Orbit
Mobile supply and disposal system
Page52-63
Design examples
and planning guides
Page64-69
Colours
for powder coating, upholsteries,
plastic elements and worktops
2
Page70-71
1
medi-matic® for gynaecology and proctology
vidan® – The Full HD Video Colposcope
medi-matic® for urology and urodynamics
arco for gynaecology
arco for proctology
2
conzentrum®plus
conzentrum®
Orbit
400.0402.0
400.0110.0
400.0101.0
400.0101.0
416.1070.0
400.0150.0
400.0151.0
896
416.2100.0
416.2070.0
400.0210.0
416.2020.0
416.2130.0
400.0160.0
416.2070.0
220
414.0140.0
416.1130.0 400.0201.0 400.0125.0
400.0401.0 400.0317.0 400.0210.0 2 x 400.0140.0
400.0120.0 400.0205.0 2 x 400.0141.0
400.0314.0
2 x 400.0307.0
400.0402.0
898
748
28
400.0116.0
Planning guides
3
Online colour configurator
Colours
3
medi-matic® Series 115
more functionality, flexibility and comfort
The right examination and
treatment chair for gynaecology
and rectoscopy/proctology
lModern design adapted to ergonomic
requirements
lElectromotive adjustment of foot
supports (115.7550.1)
lElectromotive height, seat and back
section adjustment via foot control
tic® 115
medi-ma
lQuick adjustment of examination
positions within a few seconds
lCall up all functions via remote control
lSaving of time and more comfort
by memory function (115.7250.1 +
115.7550.1) and simultaneous
movement of drive motors
lA low starting position allows the patient
to take her place easily – without the
need of a foot step
lEasily detachable leg support systems –
especially advantageous for wheel chair
patients and patient transfer
lAn adjustable seat heating provides
extra comfort
lEasy to keep clean and hygienic due to
smooth and closed surfaces
lPlenty of colours available for a
creatively designed finish
lSafe working load 200 kg
Illustration:
115.7550.1 with foot supports 101.4420.1
with head cushion 101.3720.0
Colours:
Upholstery: apple green 94
Powder coating: pure white RAL 9010
Plastic elements: silver grey
4
Design: Rainer Schindhelm
1
The new and trendsetting control
concept for the
examination and
treatment chairs
medi-matic® 115.7250.1
and 115.7550.1
lIlluminated graphics display
to indicate all chair functions
lElectronic diagnosis function
l2 additional programmable
keys e.g. for seat heating
(gynaecology) or water inflow
for basin with gyro flushing
(urology) and, triggering
of a cold light source or a
colposcope with integrated
sockets 101.6800.0
lStorage and display of 8
memory positions
(treatment positions/
physician’s selection)
lUp to 50% reduction of
adjustment times on 115.7250.1
and 115.7550.1 chairs
lSoft start-up and ergonomic
movement of chair positionings
lFoot and hand operation for
the control of all adjustments
Display colours:
Blue: Back section adjustment
Yellow: Seat adjustment
Green: Memory
White: Foot supports
The colour as displayed
indicates the foot control
mode.
Foot control for 115.7250.1 and 115.7550.1
with basin with gyro flushing
Foot control for 115.7250.1 and 115.7550.1:
The water valve is controlled by an additional function key. operation of the chair via foot control.
5
You have the choice –
different leg support systems available
Electrically adjustable foot
supports (115.7550.1)
and a low starting position
offer maximum comfort.
The patient can take
her place easily, especially
patients with hip complaints
and elderly patients – without
the need of foot step
115.7550.1 + 101.4420.1
Colours:
Upholstery: gold yellow 86
Powder coating: pure white RAL 9010
Plastic elements: silver grey
115.7550.1 + 101.4420.1 + 101.3720.0 + 101.4450.0
6
Horizontal positioning
for ultrasound examination.
1
115.7150.1 + 101.2270.0 + 101.1670.0 +
101.1370.0 + 101.1580.0 + 101.3720.0
115.7550.1 + 101.4550.0 + 101.3720.0
The lower legs are fixed in the heel and
calf trough with lateral support
Colours:
Upholstery: apple green 94
Powder coating: pure white RAL 9010
Plastic elements: silver grey
Urologic examination
in combination with the
gyro flushing basin
115.7150.1 + 101.2270.0 + 101.1670.0 +
101.1580.0 + 101.1370.0 + 101.3720.0 + 101.4990.0
115.7150.1 + 101.2310.0 + 101.1370.0 + 101.3720.0
Colours:
Upholstery: silver grey 55
Powder coating: sapphire blue RAL 5003
Plastic elements: silver grey
Note:
Please refer to page 17 of varimed catalogue no. 70
for our range of suitable swivel stools and examination seats.
7
medi-matic® Series 115
for gynaecology, rectoscopy/proctology
and for urology/urodynamics
560
6 80
890
350
600 - 900
230
1050
575
Model No.
Description
115.7150.1
Examination and Treatment Chair
Electromotive adjustment of Trendelenburg position and back section,
and in addition electromotive height adjustment from 600 – 900 mm,
mounting height: 550 mm.
Activation of all functions by means of foot control.
115.7250.1
Examination and Treatment Chair
Electromotive adjustment of Trendelenburg position and back section,
and in addition electromotive height adjustment from 600 – 900 mm,
mounting height: 550 mm.
With memory function for storing of 8 positions.
Activation of all functions by means of hand and foot control.
115.7550.1
Examination and Treatment Chair
Electromotive adjustment of Trendelenburg position and back section,
and in addition electromotive height adjustment from 600 – 900 mm,
mounting height: 550 mm.
With memory function for storing of 8 positions.
Electromotive adjustment of foot supports.
(without foot supports/Please consider corresponding ref.-no. 101.4420.1
or Göpel-type leg supports 101.4550.0)
Activation of all functions by means of hand and foot control.
Basic equipment:
Rinsing basin,
plastics, extensible.
Trendelenburg position
8
Storage compartment
for paper rolls.
Suitable for:
400 mm paper roll width,
Ø approx. 140 mm.
500 mm paper roll width,
Ø approx. 120 mm.
Removable seat padding
for perfect cleaning and
easy replacement.
Bracket for manual control unit made of
18/10 stainless steel, can be fitted on the left
or right side as required, snap-in function
(115.7250.1 and 115.7550.1).
ttention: All basic models without leg support system.
A
Please choose from four different systems. (See page 10)
Mobility available. (See page 12)
Back section adjustment
Height adjustment
electromotive foot-support adjustment
(115.7550.1)
Technical data
Standard equipment:
Seat, back and head sections with ergonomic upholstery, rinsing basin of plastics,
extensible, storage for paper rolls up to
500 mm width, adjustment of chair positions
via foot control, base plate with 4 levelling
screws, plastic claddings and covers in silver
grey, telescopic cladding of column and
seat/back section frame powder coated
acc. to colour chart, upholsteries acc. to
colour chart.
Connection cable of 3 m with mains
plug (upon request, prepared for fixed
connection to the wall/earth, without
connection cable).
Power supply: 230 V, 50 Hz, max. 0.45 kW.
Country specific versions available upon
request.
Safe working load: 200 kg.
Important:
Examination chairs with side rails 101.1380.0
at the back section are equipped with
a back section pad which is flush with the
lateral back section frame, see page 19,
image no. 8.
2 power sockets at the chair available,
acc. to safety standards EN 60601-1!
See accessories!
Country specific versions available upon
request.
Powder coated finish:
High quality multilayer gloss paint of
extreme knock and scratch resistance. Easy
to clean and to disinfect. Resistant to climatic
conditions. Available in Schmitz colours
acc. to colour chart (without surcharge).
Further optional colours acc. to
RAL-colour chart at extra charge.
Model No. 100.0510.0.
Upholstery:
High quality, hard wearing foam rubber
with leatherette cover. Available in Schmitz
colours acc. to colour chart without
surcharge (classic and comfort qualities).
The following information is
requested upon order:
Colour of upholstery: see colour chart!
Colour of powder coating of telescopic
steel casing and seat/back frame: see
colour chart!
1
Positionings, Dimensions:
115.7150.1
115.7250.1
115.7550.1
600–900 mm*
600–900 mm*
600–900 mm*
550 mm*
550 mm*
550 mm*
850–1150 mm*
850–1150 mm*
850–1150 mm*
600–900 mm*
600–900 mm*
600–900 mm*
0 - 52°
0 - 52°
0 - 52°
+ 19°
– 19°
+ 19°
– 19°
+ 19°
– 19°
-5°
128°-180°
1270
52°
19°
19°
Foot supports can be
lowered to 200 mm above
floor level with seat section
in horizontal pos. or even
to 95 mm with seat section
inclined by -5°
95*
Base plate
all models: 1,050 x 575 mm
Width of upholstery
all models: back section: 560 - 680 mm, seat section 585 mm
Back section, electr. adjustable
n
n
n
Trendelenburg position, electr. adjustable
n
n n
Height, electr. adjustable
n
n
Memory function
n
n
Rinsing basin
n
n
n
Side rails, seat section
l
l
l
n
Foot supports, electr. adjustable
Net weight (w/o access.)
156 kg
156 kg
n = standard equipment
n
165 kg
l = at extra charge
* in connection with mobility 101.2300.0 please add 75 mm.
Design and dimensions are subject to change.
9
medi-matic® Series 115
Accessories for all disciplines
1
Foot supports (pair) 101.4420.1
with integrated, powder coated handles,
can be swivelled to the side, lockable.
Leatherette covers for handles acc. to colour chart.
Plastic covers of transparent material as protection
for the foot supports.
2
Leg supports, Göpel type (pair) 101.4550.0
with integrated, powder coated handles.
Leatherette covers for handles acc. to colour chart.
Leg supports with integral foam upholstery in
silver grey, including fastening strap, rod of
stainless steel 18/10.
3
Göpel leg support (piece) 101.2270.0
covered integral foam upholstery in silver grey,
including fastening strap, rod of stainless steel 18/10,
excluding attachment clamp.
(requires 101.1370.0 and 101.1670.0)
3
Side rails (pair) 101.1370.0
for the seat section, stainless steel 18/10,
25 x 10 mm, 290 mm long.
3
Attachment clamp (piece) 101.1670.0
revolving, stainless steel 18/10,
for installation on side rails.
1
3
2
4
3
Handle (piece) 101.1580.0
integral foam upholstery in silver grey,
for installation on side track 101.1370.0.
(only in combination with Göpel leg supports
101.2270.0)
4
Ergo Steps (pair) 101.2310.0
leg support system with adjustable heel/calf troughs,
grey plastic, can be swivelled to the side, integrated
handles of circular tube in the same colour as the
chair. Attachment elements in stainless steel 18/10,
for installation on side rails.
(require 101.1370.0)
10
1
5
Leg plate 101.4450.0
extensible, integrated into seat section frame,
with integral foam pad,
grey (L 340 x W 470 x H 20 mm).
Safe working load: 50 kg.
(subsequent fitting possible)
550
5
6
Leg plate 101.4470.0
push-in plate, upholstered
(L 670 x W 550 x H 45 mm),
leatherette cover acc. to colour chart.
Safe working load: 50 kg.
(subsequent fitting possible)
7
Intermediate upholstery 101.4460.0
push-in-upholstery of integral foam,
grey, for extensible leg plate 101.4450.0.
(subsequent fitting possible)
8
Head cushion 101.3720.0
leatherette cover acc. to colour chart.
9
Plastic cover 101.4810.0
for the upholstery of the seat, transparent
high-quality PU, Velcro fastening at the backside.
6
10
LED examination light
If you are interested in further details please order
our flyer No. 107 for more information.
Note: The LED examination light cannot
be used in combination with the HD Video
colposcope vidan®!
7
8
9
10
11
medi-matic® Series 115
Accessories for all disciplines
1
Schmitz Set Treatment unit with
supporting arm 101.6530.0
can be rotated and swivelled, universal treatment set
for instruments, medication, disposable material etc.,
can be fitted to the chair, RH or LH fitting,
safe working load 5 kg.
2
Shelf with supporting arm 101.6540.0
can be rotated and swivelled, e.g. for instruments
and equipment. Utilisable space: 309 x 285 mm,
safe working load 10 kg.
1
6
2
7
3
8
4+5
9
3
Paper roll 100.1760.0
400 mm wide, stored into the integrated compartment.
4
2 Power sockets 101.4900.0
for 115.7150.1
acc. to EN 60601-1.
(subsequent fitting not possible)
2 Power sockets 101.4910.0
similar to 101.4900.0, but “Swiss type“ socket
(subsequent fitting not possible)
5
2 Power sockets 101.6800.0
for 115.7250.1 and 115.7550.1
according to EN 60601-1, activation of 1 socket by
manual control unit. (subsequent fitting not possible)
2 Power sockets 101.6810.0
similar to 101.6800.0, but “Swiss design”.
(subsequent fitting not possible)
Other country-specific sockets available on request.
6
Foot rest for the doctor 101.4750.0
stainless steel
(not possible in combination with the gyro flushing
basin 101.4940.0/101.4990.0 and the instrument
disposal 101.2040.0)
7
Mounting step 101.4520.0
fixed to the chair, movable,
tread of plastic material in silver grey.
(not possible in combination with mobility 101.2300.0,
gyro flushing basin 101.4940.0/101.4990.0 or
instrument disposal 101.2040.0)
8
Plastic covers (pair) 101.4800.1
of transparent material, as foot support protection.
9
Mobility 101.2300.0
4 double castors, Ø 75 mm,
lockable and electrically conductive.
(subsequent fitting possible), not available
in combination with the gyro flushing basin
101.4940.0/101.4990.0 and the mounting
step 101.4520.0
Note:
May not be used for patient transport!
12
Additional accessories
for gynaecology
Instrument disposal 101.2040.0
of sheet steel, powder coated in the colour of the
chair, fitted on the column.
Electromotive opening and closing by pressing
the front panel for instrument disposal, fully
extendable on telescopic rails, frame with removable
12 litre stainless steel basin (for 5 litres of liquid),
plastic screen insert to collect about 15 specula.
Additional stainless steel storage area.
Safe working load 8 kg.
connection cable with mains plug,
connection: 100 – 240 V, 50/60 Hz,
power consumption max. 20 W
Subsequent fitting (series 115.7) on request.
Country specific versions available upon request.
Can also be used in conjunction with:
Colposcope support 101.4310.0 or
Schmitz Set with supporting arm 101.6530.0
or shelf with supporting arm 101.6540.0
Cannot be used in conjunction with:
Footrest 101.4750.0
Mounting step 101.4520.0
Stainless steel basin 101.2010.0/101.2020.0
Lid 101.2060.0
325 x 265 mm, covers the 12 l SST container
during transportation.
(w/o ill.)
13
1
medi-matic® Series 115
Additional accessories
for gynaecology
3
1
2
101.6530.0 with 101.4310.0 + colposcope
1+2
Colposcope support 101.4310.0
for Leisegang, Leica, Kaps and Zeiss systems,
R.H. or L.H. fitting. For Kaps and Zeiss systems,
please order necessary mounting tube with
attachment from your colposcope supplier.
(w/o colposcope)
14
4
5
3
Stainless steel basin, flat 101.2050.0
(surcharge)
325 x 265 x 40 mm.
4
Stainless steel basin, deep 101.2010.0
(surcharge)
355 x 325 x 65 mm.
5
Seat heating 101.4620.0
activated or switched off by manual control unit.
Average power consumption approx. 20 watts,
adjustable indication of temperature via display.
(not available with chairs for urologic purposes
and model no. 115.7150.1)
Recommended accessories for gynaecology:
Model No.
1
115.7150.1/115.7250.1
1 x 101.3720.0 Head cushion
1 x 101.4620.0 Seat heating
(for 115.7250.1)
1 x 101.4900.0 2 Power sockets
(for 115.7150.1)
1 x 101.6800.0 2 Power sockets
(for 115.7250.1)
1 x 101.2040.0 Instrument disposal
Leg/foot support systems, optionally:
2 x 101.2270.0 Göpel-type leg supports
2 x 101.1670.0 Attachment clamps
1 x 101.1370.0 Side rails
2 x 101.1580.0 Hand grips
alternatively:
1 x 101.4420.1 Foot supports (pair)
alternatively:
1 x 101.4550.0 Göpel-type leg supports (pair)
alternatively:
1 x 101.2310.0 Ergo-Steps (pair)
1 x 101.1370.0 Side rails (pair)
115.7550.1
1 x 101.3720.0 Head cushion
1 x 101.4620.0 Seat heating
1 x 101.6800.0 2 Power sockets
1 x 101.2040.0 Instrument disposal
Leg/foot support systems, optionally:
1 x 101.4420.1 Foot supports (pair)
alternatively:
1 x 101.4550.0 Göpel-type leg supports (pair)
15
Precise, bright, easy to handle:
The world‘s first integrated video colposcope
with Full HD and 21,5“ monitor
The innovative high-tech addition for
gynaecological examination chairs
Ergonomic sitting position
lvidan® can be used in an optimally
ergonomic, fatigue-free sitting position,
thus facilitating the physician‘s work
Diagnostic accuracy
lHigh resolution images and videos
in full HD quality
lSwivelling 21.5“ monitor for a large-scale image
display and an exact rendering of the examination field
lIntegrated powerful examination light with
connectible red light for external examination
lGreen light plus an additional electronic green colour filter for a better visualization of tissues
in Pap smears
Space and time saving
lAutomatic focus and 6 to 15fold zoom
at the touch of a button
lQuick and easy documentation of the examination
findings by the Image/Video Save Button
lClearly arranged control elements
lFree swivelling allowing to store the colposcope in a space-saving parking position
lNetwork connection allows transmission
of image and video data within the surgery
and the hospital
Note!
Please refer to our catalogue no. 109 for details
regarding the vidan® Full HD Video Colposcope.
G
HQ
UA LIT Y
HD
16
SC
OP
E
HI
N
DE INY
A
M MA
GER
VI DEO COLP
O
1
Space-saving parking position
The vidan® video colposcope can be
freely swivelled and positioned. If not
used, it can be stored in a space-saving
lateral parking position.
Colours:
Upholstery: apple green 94
Powder coating: pure white RAL 9010
Plastic elements: silver grey
17
medi-matic® Series 115
Additional accessories
for urology, urodynamics
1
Basin with gyro flushing 101.4940.0
for models 115.7250.1 and 115.7550.1,
stainless steel 18/10, large and round basin Ø 360 mm
extensible, swivel-type, lockable in any position,
version for greater hygiene without profile, odour
sealing by siphon trap at site (wall/floor system),
water regulation activated by foot control or hand
control, flexible outlet hose and connecting piece,
Ø 40 mm. According to DIN EN 1717.
No plastic rinsing basin as standard fitting.
(No subsequent installation possible)
Incl. plastic cover 101.4810.0.
3
Basin with gyro flushing 101.4990.0
water regulation activated by foot control integrated
into the base plate cladding in the 115.7150.1 model,
for the rest, same execution as 101.4940.0.
2
Sieve 100.1840.0
round, stainless steel, for basin with gyro flushing.
3
Bracket 101.4970.0
stainless steel, lateral storing on LHS or RHS,
for basin with gyro flushing.
4
Rinsing basin 101.2020.0
stainless steel 18/10, W 350 x L 325 x D 65 mm,
with outlet, stopper and hose 3/4“, 1,200 mm long.
Replaces the standard plastic rinsing basin.
Incl. plastic cover 101.4810.0.
1
12-litres bucket 100.1350.0
stainless steel 18/10, with recess in the lid to insert hose.
2
18
4
1
5
6
9
7
10
8
11
5
Drain gutter for fluids 101.6600.0
made of stainless steel, for installation behind
the seat section.
7
Supporting bar 101.4980.0
for upright positioning (80°) of the back section
upholstery.
6
Special seat section pad 101.4950.0
for Urodynamics section, W 585 mm, L 350 mm.
Replaces standard seat section pad.
8
Side rails (pair) 101.1380.0
stainless steel, 25 x 10 mm, fixed to back section,
for the attachment of accessories, 480 mm long.
(subsequent fitting not possible)
Adapting section 101.4960.0
as extension, two-piece, for Urodynamics section,
each piece: W 220 mm, L 150 mm.
(requires side rails 101.1390.0, page 17)
Note:
Examination chairs with side rails
101.1380.0 at the back section are equipped with a back section pad which is flush
with the lateral back section frame (ill. 8).
9
Side rails (pair) 101.1390.0
stainless steel, 25 x 10 mm, 150 mm long,
for the seat, usable with 101.4420.1 or 101.4550.0,
for fixation of the adapting section 101.4960.0
(subsequent fitting not possible)
10
Arm rest 101.1030.0
integral foam pad, antistatic, black, with straps
and clamp 101.1660.0, horizontally and vertically
adjustable, tiltable by ball-and-socket joint,
400 mm long pad, stainless steel attachment.
(Side rails, model no. 101.1380.0 have to be considered)
11
Socket for potential equalisation
101.4930.0
19
medi-matic® Series 115
Recommended accessories for urology
Model No.
115.7150.1/115.7250.1
1 x 101.3720.0 Head cushion
1 x 101.4900.0 2 Power sockets
(for 115.7150.1)
1 x 101.6800.0 2 Power sockets
(for 115.7250.1)
Choice of accessories:
1 x 101.4990.0 Gyro flushing basin
(for 115.7150.1)
1 x 101.4940.0 Gyro flushing basin
(for 115.7250.1)
1 x 100.1840.0Sieve
1 x 101.6600.0 Drain gutter for fluids
alternatively:
1 x 101.2020.0 Rinsing basin with outlet
1 x 100.1350.0 12 l bucket
1 x 101.6600.0 Drain gutter for fluids
Leg/foot support systems, optionally:
2 x 101.2270.0 Göpel-type leg supports
2 x 101.1670.0 Attachment clamps
1 x 101.1370.0 Side rails
2 x 101.1580.0 Hand grips
alternatively:
1 x 101.4420.1 Foot supports (pair)
alternatively:
1 x 101.4550.0 Göpel-type leg supports (pair)
115.7550.1
1 x 101.3720.0 Head cushion
1 x 101.6800.0 2 Power sockets
Choice of accessories:
1 x 101.4940.0 Gyro flushing basin
1 x 100.1840.0Sieve
1 x 101.6600.0 Drain gutter for fluids
alternatively:
1 x 101.2020.0 Rinsing basin with outlet
1 x 100.1350.0 12 l bucket
1 x 101.6600.0 Drain gutter for fluids
Leg/foot support systems, optionally:
1 x 101.4420.1 Foot supports (pair)
alternatively:
1 x 101.4550.0 Göpel-type leg supports (pair)
Rinsing basin
101.2020.0 and
bucket 100.1350.0
20
Recommended accessories for urodynamics
Model No.
1
115.7150.1/115.7250.1
1 x 101.4950.0 Special pads
1 x 101.1390.0 Side rails, pair
1 x 101.4960.0 Adapting section
1 x 101.4970.0Bracket*
1 x 101.4980.0 Supporting bar
Leg/foot support systems, optionally:
2 x 101.2270.0 Göpel-type leg supports
2 x 101.1670.0 Attachment clamps
1 x 101.1370.0 Side rails
2 x 101.1580.0 Hand grips
alternatively:
1 x 101.4420.1 Foot supports (pair)
alternatively:
1 x 101.4550.0 Göpel-type leg supports (pair)
115.7550.1
1 x 101.4950.0 Special pads
1 x 101.1390.0 Side rails, pair
1 x 101.4960.0 Adapting section
1 x 101.4970.0Bracket*
1 x 101.4980.0 Supporting bar
Leg/foot support systems, optionally:
1 x 101.4420.1 Foot supports (pair)
alternatively:
1 x 101.4550.0 Göpel-type leg supports (pair)
*Note:
This bracket is required for lateral storage
of the gyro flushing basin 101.4940.0
or 101.4990.0.
Supporting bar
101.4980.0
for upright
positioning
(80°) of the back
section upholstery
Adapting
section,
as extension
101.4960.0
21
arco – the gynaecological
chair makes a good
impression in every respect
lExcellent design, most
modern technology
and a strong price per formance ratio
lLow basic height allows
the patient to take her
seat with ease
lWide electromotive
adjustment range from
Trendelenburg to shock
position
lErgonomic leg and foot
support system with
integrated armrests for a
relaxed and professional
examination position
lMany different colours for
upholstery and powder coated
finish according to the Schmitz
colour range
lVariable fit-out options with an
extensive assortment of accessories.
lEasy to keep clean and hygienic
due to smooth, closed surfaces
lMemory control (optional)
3 examination positions may be
stored and called up if requested
(model 114.7000.1 with 8 memory
positions).
Moreover, they are also kept in
case of power failure
Memory control for
114.5950.1 + 114.6000.1
Illustrated model 114.7000.1:
Powder coating: white aluminium RAL 9006
Upholstery: caribbean blue 82
Plastic elements: silver grey
22
Design: Rainer Schindhelm
1
Alteration of the seat height by adjusting
the Trendelenburg position from 575 mm to 1,320 mm (electromotor drive)
Shock position
23
arco
for gynaecology
Description
Examination and Treatment Chair 114.5000.1
Electromotive adjustment of Trendelenburg position. Back section connected to
the seat section at fixed angle (45°), seat height adjustable from 575 mm to 1,320 mm
by raising the Trendelenburg position.
Foot supports with integrated, powder coated handlebars, manual swivelling and locking,
with one pair of plastic covers 101.4800.1. Activation of functions by means of foot control.
114.5000.1
Examination and Treatment Chair 114.6000.1
Same design as 114.5000.1, but with add’l memory function for storing and calling
of 3 positionings (manual control unit) or calling of 2 positionings (foot control).
Activation of functions incl. memory function by means of hand and foot control.
Examination and Treatment Chair 114.4950.1
Same design as 114.5000.1, but excluding foot supports, to be equipped with a
different Schmitz leg support system.
Activation of functions by means of foot control.
Examination and Treatment Chair 114.5950.1
Same design as 114.4950.1, but with add’l memory function for storing and calling
of 3 positionings (manual control unit) or calling of 2 positionings (foot control).
Activation of functions incl. memory function by means of hand and foot control.
114.4950.1
Examination and Treatment Chair 114.7000.1
With memory function, add’l manual control unit for storing/calling up of 8 positionings,
electromotive adjustment of Trendelenburg position and foot support,
back section connected to the seat section at fixed angle (45°), seat height adjustable
from 575 mm to 1,320 mm by raising the Trendelenburg position.
Activation of functions incl. memory function by means of hand and foot control.
Foot supports with integrated, powder coated handlebars, with one pair of plastic covers
101.4800.1. With 2 power sockets acc. EN-60601-1 (country-specific versions available
upon request), one of which can be operated by hand control.
114.7000.1
The arco 114.7000.1 control concept
lIlluminated graphics display to indicate all chair functions
lElectronic diagnosis function
l1 additional programmable key e.g. for triggering of a cold light source or
a colposcope with integrated sockets
l Storage and display of 8 memory positions
(treatment positions/physician’s selection)
l Soft start-up of chair positionings
l Foot and hand operation for the control of all adjustments
24
Standard equipment:
Ergonomic upholstery on seat, back rest
and head rest, plastic basin, extendable
and swivelling, storing space for paper roll
up to 400 mm width, foot control, base plate
with 4 levelling screws, plastic cladding,
silver grey, column and frame powder
coated according to our colour chart.
Upholstery according to our colour chart.
3 m connection cable with mains plug.
Connection: 230 V, 50 Hz, max. 0.3 kW.
Country specific versions available upon
request.
Net weight approx. 130 kg
(Model nos. 114.5000.1 and 114.6000.1)
Net weight approx. 94 kg
(Model nos. 114.4950.1 and 114.5950.1)
Net weight approx. 135 kg
(Model no. 114.7000.1)
Safe working load: 180 kg
Powder coated finish:
High quality multilayer gloss paint of
extreme knock and scratch resistance. Easy
to clean and to disinfect.
Resistant to climatic
conditions. Available in Schmitz colours
acc. to colour chart (without surcharge).
Further optional colours acc. to
RAL-colour chart at extra charge.
Model No. 100.0510.0.
1
Adjustment functions and
dimensions
635 mm (0°)*
Straight shaped sitting profile for a relaxed
and professional examination position.
575 mm (-3°)*
+52°
-7°
integrated sockets (for 114.7000.1 only)
1320 mm*
Foot supports can
be lowered down
to 200 mm above
floor level and
even to 95 mm
in inclined seat
position
Upholstery:
High quality, hard wearing foam rubber
with leatherette cover. Available in Schmitz
colours acc. to colour chart without
surcharge (classic and comfort qualities).
95 mm
Base plate 960 x 565 mm
Upholstery width 565 mm
(seat section), up to 695 mm (back section)
* in connection with mobility 101.0223.0 please add 75 mm.
Design and dimensions are subject to change.
The following information is
requested upon order:
Colour of upholstery: see colour chart!
Colour of powder coating of steel
casing and seat/back frame: see colour
chart!
Trendelenburg position
114.4950.1 to 114.7000.1
electromotive adjustment of foot supports
114.7000.1
25
arco
Accessories
1
Plastic cover 101.4820.0
for the upholstery of the seat.
2
Paper roll 100.1760.0
400 mm wide, for placing into the integrated storing
space with removable back upholstery.
3
Foot rest for the doctor 101.4700.0
4
Mobility 101.0223.0
for models 114.4950.1, 114.5000.1 and 114.7000.1,
4 double castors, Ø 75 mm,
lockable and electrically conductive.
(subsequent fitting not possible)
1
Note:
may not be used for patient transport!
5
Colposcope support 101.4210.0
for Leisegang, Leica, Kaps and Zeiss systems,
RH or LH fitting. For Kaps and Zeiss systems,
please order necessary mounting tube with
attachment from your colposcope supplier!
(without colposcope)
(not possible in combination with the mobility 101.0223.0)
2
5
3
6
4
7
114.5000.1 with 101.4210.0
(without colposcope)
6
Leatherette covers (pair) 101.4850.0
for integrated handles, with zipper, acc. to colour chart.
Leatherette covers (pair) 101.4860.0
for handles (101.4580.0) with zipper, acc. to colour chart.
(not illustrated)
7
Head cushion 101.3730.0
incl. Velcro, leatherette cover acc. to colour chart.
8
Plastic covers (pair) 101.4800.1
of transparent material, to protect the foot supports.
Stainless steel basin 101.3850.0
(surcharge)
350 x 325 x 65 mm
(not illustrated)
Stainless steel basin 101.3860.0
similar to 101.3850.0, but for model 114.7000.1
(not illustrated)
26
8
1
11
9
114.4950.1 with 101.4580.0
114.4950.1 with
101.1360.0, 101.1670.0, 101.2270.0
12
arco models 114.4950.1 to 114.6000.1
can be fitted with different
Schmitz leg support systems:
9
Göpel leg supports with
integrated handles (pair) 101.4580.0
10
Ergo Steps (pair) 101.2310.0
Leg support system with adjustable heel/calf troughs,
grey plastic, can be swivelled to the side, integrated
handles of circular tube in the same colour as
the chair. Attachment elements in stainless steel,
for installation on side rails.
(require 101.1360.0)
11
Göpel leg support piece 101.2270.0
Integral foam upholstery in silver grey,
including fastening strap, stainless steel rod 18/10,
excluding attachment clamp.
(requires 101.1360.0 and 101.1670.0)
Side rails (pair) 101.1360.0
For the seat section, stainless steel, 25 x 10 mm,
290 mm long, including attachments for tubular frame.
10
114.4950.1 with 101.2310.0, 101.1360.0
Attachment clamp (piece) 101.1670.0
Revolving, stainless steel, for installation on side rails.
Handle (piece) 101.1580.0
Integral foam upholstery in silver grey,
for installation on side rail 101.1360.0.
(only in combination with Göpel leg supports 101.2270.0)
12
Side rail (piece) 101.1400.0
for the seat section, stainless steel, 25 x 10 mm,
150 mm long, fixed to the tubular frame
27
arco
Examination and Treatment Chair
for Proctology
lExcellent design, most modern
technology and a strong price –
performance ratio
lLow basic height allows the patients
to take its seat with ease
lElectromotive foldable seat section
lSafe positioning of the patient with
foldable seat section by electrical
shutdown
lElectromotive adjustment of
Trendelenburg position and seat section
lErgonomic leg and foot support system
with integrated armrests for a relaxed
and professional examination position
lMany different colours for upholstery
and powder coating acc. to Schmitz
colour range
lVariable fit-out options with an
extensive assortment of accessories
lEasy to keep clean and hygienic due
to smooth, closed surfaces
The arco 114.6600.1 control concept
lIlluminated graphics display to
indicate all chair functions
lElectronic diagnosis function
l1 additional programmable
key e.g. for triggering of a cold light
source with integrated sockets
lStorage and display of 8 memory
positions (treatment positions/
physician’s selection)
lSoft start-up of chair adjusting movements
lFoot and hand operation for the
control of all adjustments
Illustrated colours:
arco
Powder coating: grey aluminium RAL 9007
Upholstery: carmine red 92
Plastic elements: silver grey
Modules:
Body grey aluminium RAL 9007
Fronts grey aluminium RAL 9007
Strip above top drawer grey aluminium RAL 9007
Bar handles semicircular brown red RAL 3011
(special colour)
28
Functions and
Leg Support Systems
1
Low basic height for comfortable mounting position
Large adjustable range from Trendelenburg
position to shock position
Ideal examination and treatment position due to
electromotive foldable seat section
29
arco
for Proctology
Examination and
Treatment Chair
Model no. 114.6600.1
Electromotive Trendelenburg position and
foldable seat section. Without leg support
system. Memory control for 8 positionings.
Activation of all functions by means of foot
and hand control.
Electromotive Trendelenburg
position and foldable seat section
Standard equipment:
Ergonomic upholstery on seat, back rest
and head, storage plate with integrated
pull-out, SST rinsing basin, automatic
positioning, storing space for paper roll up
to 400 mm width, two integrated power
sockets, acc. to EN 60601-1, (activation
of one socket by manual control unit).
Foot control, base plate with 4 levelling
screws, plastic cladding, silver grey, column
and frame powder coated according
to our colour chart.
Upholstery according to our colour chart.
3 m connection cable with mains plug.
Connection: 230 V, 50 Hz, 0.3 kW
Country specific versions available upon
request.
Net weight approx. 120 kg
Safe working load: 180 kg
Powder coated finish:
High quality multilayer gloss paint of
extreme knock and scratch resistance.
Easy to clean and to disinfect. Resistant
to climatic conditions. Available in
Schmitz colours acc. to colour chart
(without surcharge).
Further optional colours acc. to
RAL colour chart at extra charge.
Model no. 100.0510.0.
Adjustment functions and
dimensions
635 mm (0°)*
575 mm (-3°)*
+52°
-7°
1350 mm*
1120 mm*
Upholstery:
High quality, hard wearing foam rubber
with leatherette cover. Available in
Schmitz colours acc. to colour chart without
surcharge (classic and comfort qualities).
The following information is
requested upon order:
Colour of upholstery: see colour chart!
Colour of powder coating of steel casing
and seat/frame: see colour chart!
Important:
Automatic security stop with foldable seat
section in Trendelenburg position.
30
780 mm*
Base plate 960 x 565 mm
Upholstery width 565 mm (seat section)
up to 695 mm (back section)
* in connection with mobility 101.0223.0 please add 75 mm.
Design and dimensions are subject to change.
Accessories
1
1
Foot support (pair) 101.4560.1
with integrated, powder coated handlebars, can
be swivelled and locked. With one pair of plastic.
covers.
2
Göpel leg support (pair) 101.4580.0
with integrated, powder coated handlebars,
integral foam pads in silver grey, with straps,
stainless steel rod 18/10.
1
3
Ergo-Steps (pair) 101.4570.0
Leg support system with adjustable heel/calf troughs,
grey plastic, can be swivelled to the side, integrated
handles, circular tube in the same colour as the chair.
6
4
Leatherette covers (pair) 101.4850.0
for handles (101.4560.1 and 101.4570.0) with zipper,
acc. to colour chart.
7
2
8
9
5
Leatherette covers (pair) 101.4860.0
for handles (101.4580.0), with zipper,
acc. to colour chart.
6
Mobility 101.0223.0
for model 114.6600.1,
4 double castors, Ø 75 mm,
lockable and electrically conductive.
(subsequent fitting not possible)
Note:
may not be used for patient transport!
7
Head cushion 101.3730.0
incl. Velcro, leatherette cover acc. to colour chart.
3
10
9
Storage plate with integrated
pull-out SST rinsing basin
– included as standard –
with support for mounting on the chair column
(not screwed), powder coated in the same colour
as the chair to support a cold light source.
Dimensions: 340 x 370 mm.
Safe working load 10 kg.
rinsing basin 350 x 325 x 65 mm (W x D x H)
4
5
8
Plastic covers (pair) 101.4800.1
of transparent material, to protect the foot supports.
Integrated sockets included as standard.
10
Paper roll 100.1760.0
400 mm wide, for placing into the integrated
storing space with removable back upholstery.
31
conzentrum®
The modular cabinet system
for the gynaecologist
The conzentrum® modular cabinet system
has been developed in the light of our
many years’ experience in this field.
For this reason, the system guarantees
Illustrated colours:
Cabinet system –
worktop: dark anthracite 80
cabinet body, base: alabaster grey RAL 0007500
front panels: alabaster grey RAL 0007500
handles semicircular matte chromium-plated
Gynaecological chair –
upholstery: titan grey 91
powder coated finish: alabaster grey RAL 0007500
plastic cladding: silver-grey
32
best-possible working conditions and a
high comfort of treatment in the gynaecologists’
surgeries. Painstakingly worked
high quality steel, a first class powder
coated finish and a host of practical details
ensure a long service life combined with
the highest performance.
2
Note:
Please refer to page 17 of
varimed catalogue no. 70 for
our range of suitable swivel
stools and examination seats.
33
conzentrum®plus
the wall-mounted alternative
34
2
Illustrated colours:
Cabinet bodies and fronts: pure white RAL 9010
Bar handles: angular, matte chromium-plated
Worktop: Corian Glacier white with RGB LED
Gynaecological chair: upholstery caribbean blue 82
powder-coated finish: pure white RAL 9010
plastic cladding: silver grey
35
conzentrum®
conzentrum®plus
1
4
5
2
4
5
3
4
5
1
Schmitz-Set
infinite horizontal and vertical adjustment of
treatment unit.
2
Semicircular or angular bar handles.
3
Easy tool-free removal of drawers.
36
4
A variety of worktops, basins and mixers are at your
choice.
5
LED lighting for worktops.
6
Push-in cabinet front exposing pull-out.
7
Electromotive opening of waste drawer by
tapping on the front panel.
8
Mechanic closing.
9
Simply removable drawer fronts for easy cleaning.
6
9
10
Drawers with automatic pull-in and Airmatic damping.
Closed drawer rails. Full pull-out for optimal use and
hygiene.
11
Built-in heating plate for preheating specula.
Temperature setting and monitoring via display,
adjustable up to max. 40 °C / 104 °F.
7
10
2
8
11
37
conzentrum®
Cabinets with socle
Width 450 mm
Standard height 900 mm
incl. socle 95 mm and worktop 30 mm,
Standard depth 460 mm,
Depth of worktop 480 mm.
All cabinets are without worktop.
Model no.
Description
414.0010.0
Treatment cabinet
4 drawers Type 4 B
3 drawers Type 4 D
414.0020.0
Treatment cabinet
2 drawers Type 4 B
4 drawers Type 4 D
414.0030.0
Treatment cabinet
2 drawers Type 4 B
2 drawers Type 4 D
1 drawer Type 4 G
414.0040.0
Utility cabinet
5 drawers Type 4 D
414.0050.0
Utility cabinet
3 drawers Type 4 D
1 drawer Type 4 G
414.0080.0
Utility cabinet
RH hinged door,
1 adjustable plastic shelf
400.0403.0
38
Model no.
Description
414.0090.0
Utility cabinet
LH hinged door,
1 adjustable plastic shelf
400.0403.0
414.0140.0
Corner washbasin cabinet
Lateral and back panels with cut-out
for sanitary installation,
fixed upper panel
300 mm high, below refuse drawer
with plastic refuse container, 20 l cap.,
and tip-on mechanism,
height of drawer front 450 mm
(Can only be placed in a corner; add‘l corner
panels as shown on page 40 required.)
2
39
conzentrum®
Cabinets with socle
Width 600 mm
Standard height 900 mm
incl. socle 95 mm and worktop 30 mm,
Standard depth 460 mm,
Depth of worktop 480 mm.
All cabinets are without worktop.
Model no.
Description
416.1010.0
Treatment cabinet
4 drawers Type 6 B
3 drawers Type 6 D
416.1020.0
Treatment cabinet
2 drawers Type 6 B
4 drawers Type 6 D
a preheating element model no. 400.0402.0 (accessory) can be installed in the top two drawers Type 6 D
416.1030.0
Treatment cabinet
2 drawers Type 6 B
2 drawers Type 6 D
1 drawer Type 6 G
a preheating element model no. 400.0402.0 (accessory) can be installed in the drawers Type 6 D
416.1040.0
Utility cabinet
5 drawers Type 6 D
a preheating element model no. 400.0402.0 (accessory) can be installed in the top two drawers
Type 6 D
416.1050.0
Utility cabinet
3 drawers Type 6 D
1 drawer Type 6 G
a preheating element model no. 400.0402.0 (accessory) can be installed in the top two drawers
Type 6 D
416.1060.0
Multi-purpose cabinet
2 drawers Type 6 B
1 drawer Type 6 D
1 refuse drawer with 2 pc. plastic refuse containers, 20 l cap. each and tip-on mechanism,
height of drawer front 450 mm
40
Cabinets with socle, width 600 mm
Utility and treatment cabinets, mobile
width 600 mm
Model no.
Description
416.1070.0
Utility cabinet
push-in flap 300 mm high, concealing 1 pull-out [interior dimensions 500 x 380 x 240 mm (W x D x H)]
and 1 power outlet strip with 3 Schuko sockets type F, below 3 drawers Type 6 D. A preheating
element model no. 400.0402.0 (accessory) can be installed in the top drawer Type 6 D.
416.1100.0
Washbasin cabinet
back panel with cut-out for sanitary installation, fixed upper panel 300 mm high,
below refuse drawer with 2 pc. plastic refuse containers, 20 l + 8 l cap. and tip-on mechanism,
height of drawer front 450 mm.
416.1130.0
Dispensing and disposal cabinet
2 drawers Type 6 D, 1 refuse drawer, electromotive opening by tapping on the panel, mechanic
closing, with removable SST container, 12 l cap., (for 5 litres of liquid). Plastic basket to accommodate
approx. 15 specula and plastic refuse container, 8 l cap., height of drawer front 450 mm. A preheating
element model no. 400.0402.0 (accessory) can be installed in the top drawer Type 6 D.
2
416.0110.0
Utility cabinet dimensions: 625 x 910 x 530 mm (W x H x D), mobile,
4 twin castors Ø 50 mm, el. conductive, silver-grey ABS* chassis cover,
upper push-in flap 300 mm high, concealing 1 pull-out
[interior dimensions 500 x 380 x 240 mm (W x D x H)]
and 1 power outlet strip with 3 Schuko sockets type F, below 3 drawers Type 6 D.
No installation of preheating element possible.
416.0120.0
Treatment cabinet dimensions: 625 x 1060 x 530 mm (W x H x D),
mobile, 4 twin castors Ø 50 mm, el. conductive,
ABS* chassis cover, silver grey colour,
moulded top made of ABS*, silver grey colour, with treatment
set accommodating instruments,
medicines, disposables etc., 5 drawers Type 6 D.
A preheating element model no. 400.0402.0 (accessory)
can be installed in the top two drawers Type 6 D.
*ABS = Acrylonitrile-Butadiene-Styrene
41
conzentrum®
Accessories for cabinets with socle
Model no.
Description
28
400.0101.0
600
up to
16
400.0104.0Worktop
16 mm thick,
depth of worktop up to 900 mm
Colour SolidColor:
900
light grey 90 or basalt 95
up to
28
400.0110.0 Worktop 785-900 for corner cabinet, 28 mm thick,
depth of worktop up to 600 mm
Colour Select:
white 65, manhattan 75 or
up to 600
dark anthracite 80
Worktop 28 mm thick,
depth of worktop up to 600 mm
Colour Select:
white 65, manhattan 75
or dark anthracite 80
Model no.
28
30
28
up to 900
42
400.0105.0
up to 600
Worktop 30 mm thick,
depth of worktop up to 600 mm
Colour SolidColor:
light grey 90 or basalt 95
400.0111.0 Worktop for corner cabinet, 28 mm thick,
785-1200
depth of worktop up to 900 mm
Colour Select:
white 65, manhattan 75 or
up to 900
dark anthracite 80
16
30
400.0114.0 Worktop 785-900 for corner cabinet, 30 mm thick,
depth of worktop up to 600 mm
Colour SolidColor:
light grey 90 or basalt 95
30
up to 600
Description
400.0103.0Worktop
16 mm thick,
depth of worktop up to 600 mm
Colour SolidColor:
light grey 90 or basalt 95
up to 600
400.0106.0
to 900
up
Worktop 30 mm thick,
depth of worktop up to 900 mm
Colour SolidColor:
light grey 90 or basalt 95
400.0112.0 Worktop 785-900 for corner cabinet, 16 mm thick,
depth of worktop up to 600 mm
Colour SolidColor:
light grey 90 or basalt 95
785-900
16
up to 600
785-900
785-1200
16
400.0102.0Worktop
28 mm thick,
depth of worktop up to 900 mm
Colour Select:
white 65, manhattan 75
up to 900
or dark anthracite 80
Model no.
785-1200
785-900
400.0113.0 Worktop for corner cabinet, 16 mm thick,
785-1200
depth of worktop up to 900 mm
Colour SolidColor:
light grey 90 or basalt 95
Description
400.0115.0 Worktop 785-1200 for corner cabinet, 30 mm thick,
depth of worktop up to 900 mm
Colour SolidColor:
light grey 90 or basalt 95
785-1200
30
up to 900
400.0120.0 Worktop jointing kit
incl. cut and tensioning device
400.0116.0Corian® worktop
12 or 30 mm thick,
with or w/o washbasin Ø 325 mm.
Colour:
Glacier White, Dusk (light)
or Midnight (dark)
400.0125.0
Writing and
microscope table
28 mm thick,
depth of table up to 600 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour Select:
white 65, manhattan 75 or
dark anthracite 80
400.0126.0
400.0127.0
400.0128.0
Writing and
microscope table
15 mm thick,
depth of table up to 900 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour SolidColor:
light grey 90 or basalt 95
Writing and
microscope table
28 mm thick,
depth of table up to 900 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour Select:
white 65, manhattan 75 or
dark anthracite 80
Writing and
microscope table
15 mm thick,
depth of table up to 600 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour SolidColor:
light grey 90 or basalt 95
15
130
Model no.
Description
Model no.
Description
Model no.
Description
400.0129.0
Writing and
microscope table
30 mm thick,
depth of table up to 600 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour SolidColor:
light grey 90 or basalt 95
400.0130.0
Writing and
microscope table
30 mm thick,
depth of worktop up to 900 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour SolidColor:
light grey 90 or basalt 95
400.0135.0
Lower panel
for writing and microscope
worktop, 16 mm thick,
510 mm high.
Colour Select:
white 65, manhattan 75 or
dark anthracite 80
400.0136.0
Lower panel
or writing and microscope
worktop, 16 mm thick,
510 mm high.
Colour SolidColor:
light grey 90 or basalt 95
400.0140.0
Boring for cable outlet
Ø 80 mm
LH or RH position
on the writing top
400.0141.0 Cable outlet
Ø 80 mm
metal matte chromium-plated
80
400.0150.0 Wall connection profile
Top-Line
approx. 15 x 15 mm,
length 2500 or 5000 mm,
surface aluminium, SST finished look
or white, cut to size on site upon
15
installation
400.0201.0 Undermount ceramic
washbasin, round
Colour white, inner Ø 400 mm,
without overflow, outlet Ø 50 mm,
with tap hole rim. punched tap hole
diam. 35 mm LHS, RHS pre-punched
400
soap dispenser hole Ø 30 mm
Note:
This washbasin is only suitable for
conzentrum® corner solutions.
Does not fit conzentrum® plus!
400.0211.0 Overflow pipe
not lockable Ø 80 mm,
for undermount ceramic
washbasin 400.0202.0
400.0151.0 Set of moulded parts
Top-Line
Colour black
(2 LH and RH end caps each,
2 outside corners, 2 inside corners 135°,
3 inside corners 90°)
400.0210.0
Overflow pipe
not lockable Ø 50 mm,
for undermount ceramic
washbasin 400.0201.0
120
400.0160.0 RGB - LED
lighting profile 50 x 14 mm
made of high quality opal-white
acrylic, RGB equipment (different
colours ) RGB - LED lighting profile
mounted under the front edge of
the worktop. Supplied incl. power
supply unit, controller cable and
connector.
400.0202.0
Undermount ceramic
washbasin, round
Colour white, inner Ø 375 mm,
without overflow, outlet Ø 80 mm,
w/o tap hole rim
375
160
400.0203.0
Undermount SST
washbasin round
inner Ø 345 mm,
without overflow, outlet diam. 50 mm,
w/o tap hole rim.
400.0212.0
Overflow pipe
not lockable Ø 50 mm,
for undermount SST
washbasin 400.0203.0
400.0207.0
Single-lever mixer
with IR sensor
chromium-plated,
for high pressure
345
400.0205.0 Single-lever mixer
chromium-plated,
for high pressure
400.0206.0 Single-lever mixer
chromium-plated,
for low pressure
43
2
conzentrum®
Accessories for cabinets with socle
Model no.
Description
Model no.
Description
400.0208.0
Single-lever mixer
with IR sensor
chromium-plated,
for low pressure
400.0301.0 Front panel
flush with cabinet body RHS or
LHS, with socle, up to 350 mm
Model no.
400.0303.0 Front panel
flush with cabinet front RHS or
LHS, with socle, up to 350 mm
up to 350
up to 350
400.0305.0 Corner panel
135°, flush with cabinet front,
with socle
400.0304.0 Lateral extension panel
RHS or LHS,
with socle, up to 350 mm
57,5
Description
400.0306.0 Corner panel
90°, flush with cabinet front,
with socle
57,5
84,5
84,5
up to 350
400.0318.0 Corner panel
90°, flush with cabinet body,
with socle
400.0317.0 Corner panel
135°, flush with cabinet body,
with socle
400.0314.0 Corner panel
for RHS of corner cabinet,
with socle
61
440
61
12,5
12,5
400.0315.0 Corner panel
for LHS of corner cabinet,
with socle
440
400.0307.0
Supporting angle
to support working and
microscope top,
powder-coated acc. to
cabinet body
400.0312.0
Supporting legs
870 mm high,
to support worktop,
powder-coated acc.
to cabinet body
400.0308.0Bracket
to fix worktop
400
to the wall, powder-coated
acc. to cabinet body
250 12,5
400.0311.0
720
Supporting legs
720 mm high,
to support worktop,
powder-coated acc.
to cabinet body
870
395
395
44
400.0401.0Schmitz-Set
pivoting and height adjustable
in any position, RHS or LHS
mounted to the cabinet,
ABS* top section, colour
silver-grey, with 1 tray with
SST insert, 3 glass dishes with
lid and 4 high containers made
of SST, for instruments and drugs,
disposables etc. This model is
only available in combination
with a conzentrum cabinet.
Attention:
Not available for mobile
cabinets (danger of tilting).
Model no.
Description
Model no.
Description
Model no.
Description
400.0404.0 Silicone insert for tray
380 x 200 mm (L x W),
for Schmitz-Set 400.0401.0
400.0402.0 Preheating element
CE/93/42/EEC
for drawer Type 6 D. Setting and
monitoring of temperature via display, adjustable up to max. 40 °C /
104 °F, for instruments (e.g. specula).
Input supply voltage 100 - 240 V,
50/60 Hz, average power
consumption 20 Watt, cable with
mains plug, approx. 5 m long.
400.0403.0 Adjustable plastic shelf
for cabinets of 450 mm width
model nos. 414.0080.0 and
414.0090.0
401.0450.0
Lid
325 x 265 mm, SST,
to cover the 12 l SST container,
12 l cap., during transport
(w/o ill.)
401.0451.0
Lid
297 x 204 mm,made of plastic,
to cover the plastic refuse
container, 18 or 20 l cap.,
during transport
(w/o ill.)
400.0501.0
Drawer organizer
350 x 376 x 35 mm (W x D x H),
two rows, for drawer Type 4 B,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider made of
SAN** and 2 pc. lateral dividers
made of SAN**.
400.0502.0
Drawer organizer
350 x 376 x 35 mm (W x D x H),
three rows, for drawer Type 4 B,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
400.0503.0
Drawer organizer
350 x 376 x 55 mm (W x D x H),
three rows, for drawer Type 4 D,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
400.0504.0
Drawer organizer
350 x 376 x 55 mm (W x D x H),
two rows, for drawer Type 4 D,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
400.0507.0
Drawer organizer
498 x 376 x 55 mm (W x D x H),
three rows, for drawer Type 6 D,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
400.0505.0
Drawer organizer
498 x 376 x 55 mm (W x D x H),
two rows, for drawer Type 6 D,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
400.0508.0
Drawer organizer
498 x 376 x 35 mm (W x D x H),
three rows, for drawer Type 6 B,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
400.0506.0
Drawer organizer
498 x 376 x 35 mm (W x D x H),
two rows, for drawer Type 6 B,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
**SAN = Styrene-acrylonitrile resin
45
2
conzentrum®
Cabinets with socle
Model and material description
Dimensions
Width of cabinet body: 450/600 mm
Depth of cabinet body incl. front: 460 mm
Height of cabinet body w/o socle: 775 mm
Height of cabinet body incl. socle: 870 mm
Cabinet bodies
self-supporting construction made of
electrolytically galvanized and
phosphatized sheet steel in sandwich
construction, double-skinned execution,
single-skinned back panel, sound damped and thermally insulated, high rigidity,
smooth inner and outer surfaces.
Worktop Select
28 mm high quality chipboard E 1,
face side and lateral and front
edges faced with HPL 0,7 mm, angular
front edge.
Reverse side and rear edge protected with
moisture-resistant paper foil.
Max. length of worktop: 4100 mm.
Surface resistant to diluted
alkaline substances
Colour options: white 65,
manhattan 75 or dark anthracite 80
Worktop SolidColor
16 or 30 mm high-quality chipboard E 1,
face side, reverse side and lateral and
Socles
front edges faced with dyed-through Somade of electrolytically galvanized and
lidColor 1.2mm, angular front edge.
phosphatized sheet steel, with 4 levelling
feet to compensate unevenness of the floor. Rear edge protected with moisture-resistant paper foil. Max. length of worktop:
4100 mm. Surface resistant to diluted alkaDrawer fronts
line substances.
Exchangeable front panels made of
electrolytically galvanized and phosphatized Colour options: light grey 90 or basalt 95
sheet steel, with rounded edges, sound
Worktop Corian®
damped and thermally insulated,
circumferential silicone sealing profile
12 or 30 mm thick, with or w/o
washbasin Ø 325 mm.
Drawers
Colour options: Glacier White, Dusk (light)
drawers completely made of electrolytically or Midnight (dark)
galvanized and phosphatized sheet steel,
powder-coated in white aluminium
Washbasins
RAL 9006. Covered, sound-damped
Ceramic and SST washbasins are installed
drawer rails with full pull-out, automatic
flush with the worktop surface,
pull-in function and Airmatic shock
jointless, waterproof resin sealed.
absorber system, high retention force,
tool-free drawer removal
RGB - LED lighting profile
Safe working load: 20 kg.
50 x 14 mm (W x H)
The profile made of high quality opalInterior drawer dimensions
white acrylic is mounted, slightly recessed,
(Usable size W x H x D)
between the front edge of the worktop
Type 4 B 354 x 51x 381 mm
and the cabinet. The worktop is shimmed
Type 4 D 354 x 126x 381 mm
up at the rear in our factory to compenType 4 G 354 x 276x 381 mm
sate the difference in height of the lighting
Type 6 B 504 x 51x 381 mm
profile. The lighting profile is operated on
Type 6 D 504 x 126x 381 mm
low voltage of 12 V.
Type 6 G 504 x 276x 381 mm
RGB LEDs provide coloured lighting. The
colours red, green and blue allow a mix
Drawer handles
of colours, including white, via a remote
semicircular or angular bar handle, made
control.
of high-pressure diecast zinc, hole spacing
192 mm. The surface is resistant to
Powder coated finish
chemicals, easy to clean and to disinfect.
A high quality polyester powder coating,
Drawer handles matte chromium-plated
a high gloss surface, extreme shock and
or with a polyester powder coating
scratch resistance, easy to clean, disinfectaccording to the drawer front or indiant-proof and climate resistant.
vidually according to our colour chart.
46
Standard colours of cabinet body and
socle grey-white RAL 9002 or white
aluminium RAL 9006 or grey aluminium
RAL 9007. Special colours for cabinet body
and socle according to colour chart on
page 70 at a surcharge:
for cabinet body, ref. 400.0801.0
for cabinet socle, ref. 400.0802.0
For drawer fronts and handles all colours
according to our colour chart on page 70
are available without surcharge.
Further RAL colours are available upon
request.
Installation
Installation is not included in our prices.
Upon request, assembly of cabinet
systems on site by our service engineers.
The relative installation charges can be
calculated upon request.
Ordering instructions:
When placing an order, please indicate:
Worktop Select: white 65,
manhattan 75 or dark anthracite 80
or
Worktop SolidColor: light grey 90
or basalt 95
or
Worktop Corian®: Glacier White,
Dusk (light) or Midnight (dark)
cabinet body :
RAL 9002, RAL 9006, RAL 9007
(standard) or according to our colour chart
at a surcharge
Fronts: according to our colour chart
Semicircular drawer handles:
according to our colour chart or matte
chromium-plated
Angular drawer handles:
according to our colour chart or matte
chromium-plated
socle:
RAL 9002, RAL 9006, RAL 9007
(standard) or according to our colour chart
at a surcharge
conzentrum®plus
Hanging cabinets without socle
Width 600 mm
Recommended working height 900 mm
incl. worktop 30 mm,
Standard depth 460 mm,
Depth of worktop 470 mm.
All cabinets are without worktop.
Model no.
Description
416.2010.0
Treatment cabinet
4 drawers Type 6 B
2 drawers Type 6 D
416.2020.0
Treatment cabinet
2 drawers Type 6 B
3 drawers Type 6 D
a preheating element model no. 400.0402.0 (accessory)
can be installed in the top drawer Type 6 D
416.2030.0
Treatment cabinet
2 drawers Type 6 B
1 drawer Type 6 D
1 drawer Type 6 G
a preheating element model no. 400.0402.0 (accessory)
can be installed in the drawer Type 6 D
2
416.2040.0
Utility cabinet
4 drawers Type 6 D
a preheating element model no. 400.0402.0 (accessory)
can be installed in the top two drawers Type 6 D
416.2050.0
Utility cabinet
2 drawers Type 6 D
1 drawer Type 6 G
a preheating element model no. 400.0402.0 (accessory)
can be installed in the two drawers Type 6 D
416.2060.0
Multi-purpose cabinet
1 drawer Type 6 B
1 drawer Type 6 D
1 refuse drawer with
2 pc. plastic refuse containers, 18 l cap.,
and tip-on mechanism,
height of drawer front 375 mm high
47
conzentrum®plus
Hanging cabinets without socle
Width 600 mm
Model no.
Description
416.2070.0
Utility cabinet
push-in flap 300 mm high, concealing 1 pull-out [interior dimensions 500 x 380 x 240 mm (W x D x H)]
and 1 power outlet strip with 3 Schuko sockets type F, below 2 drawers Type 6 D.
A preheating element model no. 400.0402.0 (accessory) can be installed in one of the two drawers Type 6 D.
416.2100.0
Washbasin cabinet
back panel with cut-out for sanitary installation fixed upper panel
225 mm high, below refuse drawer with 2 pc. plastic refuse containers,
18 + 8 l cap. and tip-on mechanism, height of drawer front
375 mm.
416.2130.0
Dispensing and disposal cabinet
1 drawer Type 6 B
1 drawer Type 6 D
1 Refuse drawer,
electromotive opening by tapping on the panel, mechanic closing, with removable
SST container, 12 l cap., (for 5 litres of liquid), plastic basket
accommodating approx. 15 specula and plastic refuse container,
8 l cap., height of drawer front 375 mm.
A preheating element model no. 400.0402.0 (accessory)
can be installed in drawer Type 6 D
48
Accessories for hanging cabinets without socle
Model no.
Description
400.0101.0Worktop
28 mm thick,
depth of worktop up to 600 mm
Colour Select:
white 65, manhattan 75 or
upto 600
dark anthracite 80
28
Model no.
16
400.0103.0Worktop
16 mm thick,
depth of worktop up to 600 mm
Colour SolidColor:
light grey 90 or basalt 95
up to 600
400.0116.0Corian® Worktop
12 or 30 mm thick,
with or w/o wash basin
Ø 325 mm.
Colour:
Glacier White, Dusk (light)
or Midnight (dark)
400.0129.0
15
Writing and
microscope table
30 mm thick,
depth of worktop up to 600 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour SolidColor:
light grey 90 or basalt 95
120
Undermount ceramic
washbasin, round
Colour white, inner Ø 375 mm,
without overflow,
outlet diam. 80 mm,
w/o tap hole rim
400.0211.0
Overflow pipe
not lockable Ø 80 mm,
for undermount ceramic
washbasin 400.0202.0
375
Model no.
Description
400.0105.0Worktop
30 mm thick,
depth of worktop up to 600 mm
30
Colour SolidColor:
light grey 90 or basalt 95
up to 600
Writing and
microscope table
15 mm thick,
depth of worktop up to 600 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour SolidColor:
light grey 90 or basalt 95
400.0125.0
Writing and
microscope table
28 mm thick,
depth of worktop up to 600 mm,
incl. front panel, for mounting
between two cabinets, incl. two
support angles and cable duct.
Colour Select:
white 65, manhattan 75 or
dark anthracite 80
400.0127.0
400.0140.0
Boring for cable outlet
Ø 80 mm
LH or RH position
on the writing top
400.0141.0 Cable outlet
Ø 80 mm
metal matte chromium-plated
80
2
400.0150.0 Wall connection profile
Top-Line
approx. 15 x 15 mm,
length 2500 or 5000 mm,
surface aluminium, SST finished
look or white, cut to size on site
15
upon installation
400.0202.0
Description
160
400.0151.0 Set of moulded parts
Top-Line
Colour black
(2 LH and RH end caps each,
2 outside corners, 2 inside
corners 135°, 3 inside corners 90°)
400.0160.0
RGB - LED
lighting profile 50 x 14 mm
made of high quality opal-white
acrylic, RGB equipment (different
colours) RGB - LED lighting profile
mounted under the front edge
of the worktop.
Supplied incl. power supply unit,
Controller, cable and connector
400.0203.0
400.0212.0
Overflow pipe
not lockable Ø 50 mm,
for undermount SST
washbasin 400.0203.0
345
Undermount SST
washbasin, round
inner Ø 345 mm,
without overflow,
outlet diam. 50 mm,
w/o tap hole rim.
49
conzentrum®plus
Accessories for hanging cabinets without socle
Model no.
Description
Model no.
Description
400.0205.0 Single-lever mixer
chromium-plated,
for high pressure
400.0206.0 Single-lever mixer
chromium-plated,
for low pressure
400.0208.0
400.0307.0
Single-lever mixer
with IR sensor
chromium-plated,
for low pressure
Supporting angle
to support worktops and
microscope tables,
powder-coated acc.
to cabinet body
400.0404.0 Silicone insert for tray
400.0401.0Schmitz-Set
380 x 200 mm (L x W),
pivoting and height adjustable in
for Schmitz-Set 400.0401.0
any position, RHS or LHS mounted to the cabinet, ABS* top section, colour
silver-grey, with 1 tray with
SST insert, 3 glass dishes with
lid and 4 high containers made
of SST, for instruments and drugs,
disposables etc. This model is only
available in combination with a
conzentrum cabinet.
Description
400.0207.0
Single-lever mixer
with IR sensor
chromium-plated,
for high pressure
400.0308.0Bracket
to fix worktop
400
to the wall, powder-coated
acc. to the cabinet body
250
400.0402.0 Preheating element
CE/93/42/EEC
for drawer Type 6 D.
Setting and monitoring of
temperature via display,
adjustable up to max. 40 °C / 104 °F,
for instruments (e.g. specula).
Input supply voltage 100 - 240 V,
50/60 Hz, average power
consumption 20 Watt, cable with
mains plug, approx. 5 m long.
401.0450.0Lid
325 x 265 mm, SST,
to cover the SST container,
12 l cap., during transport
(w/o ill.)
401.0451.0Lid
297 x 204 mm,made of plastic,
to cover the plastic refuse
container, 18 or 20 l cap.,
during transport
(w/o ill.)
400.0505.0
Drawer organizer
498 x 376 x 55 mm (W x D x H),
two rows, for drawer Type 6 D,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
400.0506.0
400.0507.0
400.0508.0
Drawer organizer
498 x 376 x 35 mm (W x D x H),
three rows, for drawer Type 6 B,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
Drawer organizer
498 x 376 x 35 mm (W x D x H),
three rows, for drawer Type 6 B,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
*ABS = Acrylonitrile-Butadiene-Styrene
**SAN = Styrene-acrylonitrile resin
50
Model no.
Drawer organizer
498 x 376 x 55 mm (W x D x H),
two rows, for drawer Type 6 D,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
Hanging cabinets without socle
Model and material description
Dimensions
Width of cabinet body:
600 mm
Depth of cabinet body incl. front: 460 mm
Height of cabinet body:
650 mm
Cabinet bodies
self-supporting construction made of
electrolytically galvanized and
phosphatized sheet steel in sandwich
construction, double-skinned execution,
single-skinned back panel sound damped
and thermally insulated high rigidity,
smooth inner and outer surfaces.
Drawer fronts
Exchangeable front panels made of
electrolytically galvanized and
phosphatized sheet steel, with rounded
edges sound damped and thermally
insulated, circumferential silicone sealing
profile.
Drawers
drawers completely made of
electrolytically galvanized and
phosphatized sheet steel, powder-coated
in white aluminium RAL 9006. Covered,
sound-damped drawer rails with full
pull-out, automatic pull-in function and
Airmatic shock absorber system,
high retention force, tool-free drawer
removal.
Safe working load: 20 kg.
Interior drawer dimensions
(Usable size W x H x D):
Type 6 B 504 x 51 x 381 mm
Type 6 D 504 x126 x 381 mm
Type 6 G 504 x 276 x 381 mm
Drawer handles
semicircular or angular bar handle, made
of high-pressure diecast zinc, hole
spacing192 mm. The surface is resistant
to chemicals, easy to clean and to
disinfect. Drawer handles matte
chromium-plated or with a polyester
powder coating according to the drawer
front or individually according to our
colour chart.
Worktop Select
28 mm high quality chipboard E 1,
face side and lateral and front
edges faced with HPL 0,7 mm, angular
front edge.
Reverse side and rear edge protected
with moisture-resistant paper foil.
Max. length of worktop: 4100 mm.
surface resistant to diluted
alkaline substances.
Colour options for worktops: white 65,
manhattan 75 or dark anthracite 80
Worktop SolidColor
16 or 30 mm high-quality chipboard E 1,
face side, reverse side and lateral and
front edges faced with dyed-through
SolidColor 1.2 mm, angular front edge.
Rear edge protected with moistureresistant paper foil.
Max. length of worktop: 4100 mm.
Surface resistant to diluted alkaline
substances.
Colour options: light grey 90 or basalt 95
Worktop Corian®
12 or 30 mm thick, with or w/o
washbasin Ø 325 mm.
Colour options: Glacier White, Dusk (light)
or Midnight (dark)
Washbasin
Ceramic and SST washbasins, are installed
flush with the worktop surface,
jointless, waterproof resin sealed.
RGB - LED lighting profile
50 x 14 mm (W x H)
The profile made of high quality opalwhite acrylic is mounted, slightly recessed,
between the front edge of the worktop
and the cabinet.
The worktop is shimmed up at the rear in
our factory to compensate the difference
in height of the lighting profile.
The lighting profile is operated on low
voltage of 12 V.
RGB LEDs provide coloured lighting. The
colours red, green and blue allow a mix
of colours, including white, via a remote
control.
Powder coated finish
A high quality polyester powder coating,
a high gloss surface, extreme shock and
scratch resistance, easy to clean, disinfectant-proof and climate resistant.
Standard colours of cabinet body
grey-white RAL 9002 or
white aluminium RAL 9006 or
grey aluminium RAL 9007.
Special colours for cabinet body are
available at a surcharge according to
colour chart on page 70 cabinet body,
ref. 400.0801.0
For drawer fronts and handles
all colours according to our colour chart
are available without surcharge.
Further RAL colours are available upon
request.
Installation
Installation is not included in our prices.
Upon request, assembly of cabinet
systems on site by our service engineers.
The relative installation charges can be
calculated upon request. Delivery
incl. long-shaft fixings with screw. Detailed
information available on request.
Ordering instructions:
When placing an order, please indicate:
Worktop Select: white 65,
manhattan 75 or dark anthracite 80
or
Worktop SolidColor: light grey 90
or basalt 95
or
Worktop Corian®: Glacier White,
Dusk (light) or Midnight (dark)
cabinet body:
RAL 9002, RAL 9006, RAL 9007
(standard) or according to our colour chart
at a surcharge
Fronts: according to our colour chart
Semicircular drawer handles:
according to our colour chart or matte
chromium-plated
Angular drawer handles:
according to our colour chart or matte
chromium-plated
51
2
Orbit
The mobile Supply and Disposal System
for Gynaecology and Proctology
Illustrated colours:
modules:
Cabinet bodies: grey aluminium RAL 9007
Front panels: signal yellow RAL 1003
Strip above top drawer: signal yellow RAL 1003
Bar handles: angular, matte chromium-plated
Gynaecological chair:
arco
upholstery: gold yellow 86
powder coated finish: grey aluminium RAL 9007
plastic cladding: silver grey
Swivel stool 222.2810.0
upholstery: gold yellow 86
powder-coated finish: grey aluminium RAL 9007
52
2
53
Orbit
The mobile Supply and Disposal System
for Gynaecology and Proctology
Orbit puts everything within reach.
Because this modular equipment concept
was developed in close cooperation
with gynaecologists, with an emphasis
on functionality, flexibility and costeffectiveness.
Orbit is mobile:
10 individual, mobile modules, which can
be arranged and rearranged just as you
need them.
Start out with a low investment:
The dispensing module alone will meet the
daily needs of your practice.
54
Orbit solves the disposal problem:
A specially equipped module is designed
for an easy and proper disposal of used
instruments and materials.
Expandable, adaptable:
Additions and changes to the module
configuration can be made whenever
needed. The same applies to the work
table surface and microscopy centre.
The modules can easily be integrated
even into an existing setup.
Everything within reach:
Fast, secure access thanks to a clear
arrangement of instruments and materials.
Flexibility provided by low-friction castors
on the dispensing, disposal and supply
module as well as on the waste container.
Quality right from the start:
Orbit is made of high-quality sheet steel
with sound-absorbing insulation. It is
extremely easy to care for, powder coated
with a high-gloss finish, extremely scratch
and impact resistant, stands up to disinfectants, and is UV and climate resistant.
2
Illustrated colours
modules:
Cabinet bodies: grey aluminium RAL 9007
Front panels: light blue RAL 2606030
Strip above top drawer: light blue RAL 2606030
Bar handles: semicircular sapphire blue RAL 5003
Gynaecological chair:
arco
upholstery: caribbean blue 82
powder coated finish:
grey aluminium RAL 9007
plastic cladding: silver grey
55
Orbit
1-3
Electromotive opening by tapping on the panel.
Mechanic closing, with removable 12 l SST container
(for 5 l of liquid) and plastic sieve.
4-5
Built-in heating plate for preheating of specula.
Temperature setting and monitoring
via display, adjustable up to max. 40 °C /
104 °F.
2
1
3
5
4
56
5
6
7
8
9
10
11
2
12
6
Easy lifting out of drawers, no tools required.
7
Simply removable drawer fronts for easy cleaning.
8
Drawers with automatic pull-in and
Airmatic damping. Closed drawer rails.
Full pull-out for optimal use and hygiene.
13
9
The dispensing modules are fitted with a
plastic cover plate with 3-sided formed edge.
10
Four antistatic twin castors Ø 50 mm for
mobility. Fully surrounded by a plastic bumper
for impact protection.
11
Semicircular or angular bar handle.
12
Disposal module 427.0010.0.
Electromotive opening through sensor technology.
Removable top, removable 20 l plastic container.
13
Disposal module 427.0020.0.
Lid opening via pedal, with lid damping, removable
12 l plastic container.
57
conzentrum® and Orbit
Doctor’s work places
for gynaecology and proctology
Illustrated colours:
Cabinet bodies and fronts: pure white RAL 9010
Bar handles: angular, matte chromium-plated
Worktop: Corian Glacier white with RGB LED
Gynaecological chair: upholstery caribbean blue 82
powder-coated finish: pure white RAL 9010
plastic cladding: silver grey
58
2
59
Orbit
Dispensing and disposal modules, mobile
Model no.
Description
426.0010.0
Dispensing module
dimensions: 625 x 760 x 530 mm (W x H x D)
2 drawers Type 6 D, 1 drawer Type 6 G.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the two drawers Type 6 D.
426.0020.0
Dispensing module
dimensions: 625 x 760 x 530 mm (W x H x D)
4 drawers Type 6 D.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the top two drawers Type 6 D.
426.0030.0
Dispensing module
dimensions: 625 x 760 x 530 mm (W x H x D)
2 drawers Type 6 B, 1 drawer Type 6 D,
1 drawer Type 6 G.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the drawer Type 6 D
426.0040.0
Dispensing and disposal module
dimensions: 625 x 760 x 530 mm (W x H x D)
1 drawer Type 6 B, 1 drawer Type 6 D,
1 refuse drawer, electromotive opening
by tapping on the panel, mechanic closing,
with removable SST container, 12 l cap., (for 5 litres of liquid),
plastic basket, to accommodate approx. 15 specula and
plastic refuse container, 8 l cap, pedal for central locking of castors.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the drawer Type 6 D
60
Model no.
Description
426.5010.0
Dispensing module
dimensions: 625 x 995 x 530 mm (W x H x D)
with moulded top made of ABS*, silver grey colour,
with treatment set accommodating instruments,
medicines, disposables etc.,
2 drawers Type 6 D, 1 drawer Type 6 G.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the two drawers Type 6 D.
426.5020.0
Dispensing module
dimensions: 625 x 995 x 530 mm (W x H x D)
with moulded top made of ABS*, silver grey colour,
with treatment set accommodating instruments,
medicines, disposables etc., 4 drawers Type 6 D.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the top two drawers Type 6 D.
426.5030.0
Dispensing module
dimensions: 625 x 995 x 530 mm (W x H x D)
with moulded top made of ABS*, silver grey colour,
with treatment set accommodating instruments,
medicines, disposables etc.,
2 drawers Type 6 B, 1 drawer Type 6 D,
1 drawer Type 6 G.
A preheating element model no. 401.0401.0 (accessory)
can be installed in the drawer Type 6 D
426.5040.0
Dispensing and disposal module
dimensions: 625 x 995 x 530 mm (W x H x D)
with moulded top made of ABS*, silver grey colour, with treatment set accommodating
instruments, medicines, disposables etc.,
1 drawer Type 6 B, 1 drawer Type 6 D,
1 refuse drawer, electromotive opening by tapping on the panel, mechanic closing, with removable
SST container, 12 l cap., (for 5 litres of liquid), plastic basket to accommodate approx. 15 specula
and plastic refuse container, 8 l cap, pedal for central locking of castors.
A preheating element model no. 401.0401.0 (accessory) can be installed in the drawer Type 6 D
427.0010.0
Disposal module
dimensions: 365 x 565 x 465 (W x H x D)
Mobile, 4 pc. twin plastic castors diam. 50 mm,
sensor lid made of plastic, colour black,
casing made of ABS*, silver grey colour,
removable plastic refuse container, 20 l cap.
427.0020.0
Disposal module
dimensions: 220 x 425 x 410 mm (W x H x D)
without castors, stable and non-tilting with 4 anti-slip feet,
opening of lid by pedal, with lid damping,
removable plastic container, 12 l cap.,
casing made of sheet steel, silver-coloured
2
*ABS = Acrylonitrile-Butadiene-Styrene
61
Orbit
Accessories for dispensing and disposal modules
Model no.
Description
401.0401.0 Preheating element
CE/93/42/EEC
for drawer Type 6 D. Setting and
monitoring of temperature via
display, adjustable up to max. 40 °C
/104 °F, for instruments (e.g. specula).
Input supply voltage 100 - 240 V,
50/60 Hz, average power consumption
20 Watt, cable with mains plug,
approx. 5 m long.
285
400.0506.0
Drawer organizer
498 x 376 x 35 mm (W x D x H),
three rows, for drawer Type 6 B,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers
made of SAN**.
**SAN = Styrene-acrylonitrile resin
62
Description
Model no.
Description
401.0450.0Lid
325 x 265 mm, SST,
to cover the 12 l SST container,
12 l cap., during transport
(w/o ill.)
401.0451.0
Lid
297 x 204 mm,made of plastic,
to cover the plastic refuse
container, 18 or 20 l cap.,
during transport
(w/o ill.)
401.0461.0Basket
SST with carrying handles,
186
for 5 litres of liquid,
to accommodate approx. 15 specula,
for disposal module 427.0020.0.
400.0505.0
Drawer organizer
498 x 376 x 55 mm (W x D x H),
two rows, for drawer Type 6 D,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
400.0508.0
Drawer organizer
498 x 376 x 35 mm (W x D x H),
three rows, for drawer Type 6 B,
disassembled, anodized aluminium
frame, comprising:
2 pc. longitudinal dividers made
of SAN**.
106
290
401.0460.0Basket
SST with carrying handles,
159
254
for 5 litres of liquid,
to accommodate approx. 15 specula,
for disposal module 427.0010.0.
Model no.
400.0507.0
Drawer organizer
498 x 376 x 55 mm (W x D x H),
two rows, for drawer Type 6 D,
disassembled, anodized aluminium
frame, comprising:
1 pc. longitudinal divider
made of SAN** and 2 pc. lateral
dividers made of SAN**.
Dispensing and disposal modules
Model and material description
Cabinet bodies
self-supporting construction made of
electrolytically galvanized and
phosphatized sheet steel, sandwich
construction, double-skinned execution,
single-skinned rear panel, sound damped
and thermally insulated high rigidity,
smooth inner and outer surfaces.
Drawer fronts
Exchangeable front panels made of
electrolytically galvanized and
phosphatized sheet steel, with rounded
edges, sound damped and thermally
insulated, circumferential silicone
sealing profile
Drawers
drawers completely made of
electrolytically galvanized and
phosphatized sheet steel, powder-coated
in white aluminium RAL 9006. Covered,
sound-damped drawer rails with full
pull-out, automatic pull-in function and
Airmatic shock absorber system,
high retention force, tool-free drawer
removal. Safe working load: 20 kg.
Interior drawer dimensions
(Usable size W x H x D)
Type 6 B 504 x 51 x 381 mm
Type 6 D 504 x126 x 381 mm
Type 6 G 504 x276 x 381 mm
Drawer handles
semicircular or angular handle, made of
high-pressure diecast zinc, hole spacing
192 mm. The surface is resistant to
chemicals, easy to clean and to disinfect.
drawer handles matte chromium-plated
or with a polyester powder coating
according to the drawer front or individually according to our colour chart.
Castors
Modules with 4 double castors
Ø 50 mm, el. conductive.
Chassis cover made of ABS,
silver grey colour.
Worktop
Seamless worktop made of ABS, silver
grey colour, scratch resistant and
disinfectant proof, profile edge on three
sides, sealed reverse side.
Powder coated finish
A high quality polyester powder coating,
a high gloss surface, extreme shock and
scratch resistance, easy to clean, disinfectant-proof and climate resistant.
Standard colours of cabinet body
grey-white RAL 9002 or
white aluminium RAL 9006 or
grey aluminium RAL 9007.
Special colours for cabinet body
according to colour chart on page 70
at a surcharge, ref. 401.0801.0.
2
For drawer fronts and handles
all colours according to our colour chart
are available without surcharge.
Further RAL colours are available upon
request.
Ordering instructions:
When placing an order, please indicate:
Worktop for module: silver-grey
cabinet body:
RAL 9002, RAL 9006, RAL 9007
(standard) or according to our colour chart
at a surcharge
Fronts: according to our colour chart
Semicircular drawer handles:
according to our colour chart or matte
chromium-plated
Angular drawer handles:
according to our colour chart or matte
chromium-plated
63
conzentrum®
Design examples
1391
400.0402.0
599
400.0110.0
400.0101.0
792
0
607
0*
40
-1
416.1070.0
400.0150.0
400.0151.0
480
2200
Model no.
Description
1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc.
0,70 m 2 pc.
2 pc.
1 pc. 1,20 m
1 pc.
1 pc.
2 pc.
1 pc.
1 pc.
1 pc.
5 m
1 pc.
400.0401.0Schmitz-Set
416.1130.0 Dispensing and disposal cabinet
400.0402.0 Preheating element
400.0317.0 Corner panel 135°
414.0140.0 Corner washbasin cabinet
400.0314.0 Corner panel 135°
400.0125.0 Writing and microscope table
400.0140.0 Boring for cable outlet
400.0141.0 Cable outlet
416.1070.0 Utility cabinet
400.0101.0 Worktop Select
400.0110.0Worktop
400.0120.0 Worktop jointing kit
400.0307.0 Supporting angle
400.0201.0 Undermount ceramic washbasin
400.0210.0 Overflow pipe
400.0205.0 Single-lever mixer
400.0150.0 Wall connection profile
400.0151.0 Set of moulded parts
For chairs with earth connection, the cabling must be
within the range (575 x 1,050 mm) of the floor space required (hatched area).
The gynaecology chair can be placed and moved within this area.
*Total dimensions of the chair in examination position
64
2090
695
2200
445
60
69
414.0140.0
416.1130.0 400.0201.0 400.0125.0
400.0401.0 400.0317.0 400.0210.0 2 x 400.0140.0
400.0120.0 400.0205.0 2 x 400.0141.0
400.0314.0
2 x 400.0307.0
898
748
28
788
480
400.0101.0
400.0402.0
400.0101.0
1759
607
695
457
416.1130.0
400.0125.0
2 x 400.0140.0
2 x 400.0141.0
480
445
898
748
28
60
400.0101.0
414.0030.0
400.0150.0
400.0151.0
Model no.
Description
1 pc. 1 pc. 0,70 m 2 pc.
2 pc.
1 pc. 1,05 m
2,50 m
1 pc.
416.1130.0
400.0402.0
400.0125.0
400.0140.0
400.0141.0
414.0030.0
400.0101.0
400.0150.0
400.0151.0
Dispensing and disposal cabinet
Preheating element
Writing and microscope table
Boring for cable outlet
Cable outlet
Treatment cabinet
Worktop Select
Wall connection profile
Set of moulded parts
2
65
conzentrum®
Planning guides
dimension
of worktop: 898
480
55
9
59
1
44
1
dimension
of worktop: 875
480
dimension
of worktop: 875
dimension
of worktop: 898
480
dimension
of worktop: 792
dimension
of worktop: 792
480
480
480
Corner solution 135° with cabinet 600 mm wide
and corner panel 400.0317.0 or 400.0314.0/
400.0315.0
dimension
of worktop: 981
Corner solution 135° with cabinet 450 mm wide
and corner panels 400.0305.0
511
480
70
9
480
511
480
554.5
dimension
of worktop: 981
480
554.5
480
Corner solution 135° with cabinet 450 mm wide
and corner panel 400.0317.0 or 400.0314.0/
400.0315.0
480
Corner solution 135° with cabinet 600 mm wide
and corner panel 400.0305.0
66
Corner solution 90° wide
corner panel 400.0306.0
Corner solution 90° wide
corner panel 400.0318.0
conzentrum®plus
Design example
2417
470
400.0116.0
416.2020.0
416.2130.0
400.0160.0
Model no.
416.2100.0
1 pc.
1 pc.
416.2020.0
416.2130.0
1 pc. 1 pc. 400.0402.0
1 pc.
416.2070.0
2,42 m 400.0116.0
1 pc.
400.0210.0
400.0207.0
1 pc.
3,35 m 400.0160.0
416.2070.0
220
416.2100.0
416.2070.0
400.0210.0
896
400.0402.0
Description
2
Washbasin cabinet
Treatment cabinet
Dispensing and disposal cabinet
Preheating element
Utility cabinet
Corian worktop 12 mm thick
incl. undermount washbasin Ø 325 mm
Overflow pipe
IR Single-lever mixer
LED lighting profile
67
Installation details
conzentrum®
conzentrum®plus
100 160
120
100 100
E
320
400
600
S
450
690
C
350
450
400
600
600
S
100
112
S
W
450
C
450
W
100
690
E
E
C
working height 900
W
220
290
W
S
C
W S C
E
E
W S C E
Solutions with small instantaneous water heater
120
190
S
320
400
76
220
S C
E
82
S C
E
82
C
82
S
190
S = Sewage hook-up diam. 40
C = Cold water supply, angle valve 1/2
W= Warm water supply, angle valve 1/2
E = Socket (splash proof)
68
Attention:
These are just examples! As conditions on site may vary, we take no responsibility.
Installation may only be done by qualified personnel.
Relevant safety regulations have to be considered.
E
600
600
400
small
instantaneous
water
heater
small
instantaneous
water
heater
290
small
instantaneous
water
heater
400
650
S
600
S
E
C
143
C
690
E
96
400
small
instantaneous
water
heater
E
C
small
instantaneous
water
heater
50 100
578.5
50 160
450
145
Orbit
Design examples
approx. 3000
1760 if back section is down
960
565
approx. 1300
2000
426.5040.0
401.0401.0
426.0020.0
427.0010.0
2
710 - 1400
56
5
2200
96
0
426.5040.0
401.0401.0
17
60
if
ba
tio
do
50
wn
71
0
-1
40
0
2200
is
24
n
x.
ro
ec
p
ap
ck
s
426.0020.0
427.0010.0
For chairs with earth connection, the cabling
must be within the range (960 x 565 mm)
of the floor space required.
The gynaecology chair can be placed and moved
within this area.
69
Colours for powder
coated finishes,
upholsteries,
plastics
and worktops
s
andle
er h
le
Draw availab ted.
also ome pla
chr
matt
You have a wide choice for designing
your furnishings entirely according to
your taste. With our range of colours
numbering in excess of 40 and the
numerous combination variants there
are no wishes, which cannot be fulfilled.
Whether muted or cheerful, classical
or modern, elegant or extravagant –
you are guaranteed to quickly find the
matching colour tone in our range.
Use your choice of colour to achieve a
positive effect on your patients. For this
we would recommend to you, for
example, an optimistic yellow, a soothing
blue or a relaxing green.
We would be delighted to advise you
– please feel free to contact us.
Powder coated finishes
grey white RAL 9002
grey aluminium RAL 9007
antique pink RAL 3014
white blue RAL 2408015*
pure white RAL 9010
rape yellow RAL 1009050*
pastel lilac RAL 3108010*
light blue RAL 2606030*
alabaster grey RAL 0007500*
signal yellow RAL 1003
jade green RAL 1808010*
sapphire blue RAL 5003
light grey RAL 7035
yellow orange RAL 0506060*
fir green RAL 1703020*
anthracite grey RAL 7016
light ivory RAL 1015
lemon green RAL 1008060*
jet black RAL 9005
sahara beige RAL 0607030*
leaf green RAL 1206050*
white aluminium RAL 9006
copper brown RAL 8004
turquoise blue RAL 5018
70
* RAL shades
We recommend:
Special cleaner for leatherette
Model no. 2019878
500 ml spray bottle
(packaging unit 3 bottles)
Please use the online colour
configurator on our homepage:
www.schmitz-soehne.com
to view possible colour combinations.
Cleaning set for leatherette
Model no. 2026973
1 x 500 ml spray bottle and a brush
Please refer to our separate operating
manual for upholsteries for detailed
information on cleaning and disinfection
of upholsteries.
Leatherette comfort
Leatherette classic
Worktops
mint green 80
tobacco brown 87
white 53
SolidColor light grey 90
moss green 81
granite grey 89
silver grey 55
SolidColor basalt 95
caribbean blue 82
platinum grey 90
ocean 52
Select white 65
atlantic blue 83
titan grey 91
black 57
Select manhattan 75
blossom white 84
red carmine 92
Select dark anthracite 80
parchment beige 85
natural brown 93
Plastic elements
gold yellow 86
apple green 94
silver grey
3
71
Schmitz u. Söhne
GmbH & Co. KG
P. O. Box 14 61
58734 Wickede (Ruhr)
Germany (postal address)
Zum Ostenfeld 29
58739 Wickede (Ruhr)
Germany (visiting address)
Phone +49 (0)2377 84 0
Fax +49 (0)2377 84 135
www.schmitz-soehne.com
export@schmitz-soehne.de
Schmitz abroad:
Switzerland
SCHMITZ AG
Caroline Meynis de Paulin
Bahnhofplatz 2
3284 Fräschels, Schweiz
Phone +41 (0) 31 75565 88
Fax +41 (0) 31 75565 89
Mobile+41 (0) 79 137 65 90
info@schmitz-suisse.ch
France
SCHMITZ FRANCE SAS
Technical service, hotline:
27, rue du Lieutenant
Phone +49 (0)2377 84 549
Colonel Prévost
Fax +49 (0)2377 84 210
69006 Lyon
service@schmitz-soehne.de
Phone+33 (0) 3 83 22 94 67
Fax +33 (0) 3 83 22 87 66
All articles including correspond- info@schmitz-france.fr
ing accessories marked with
the CE label meet the standards Spain
SCHMITZ u. Söhne Ibérica S.L.
for medical devices acc. to
Centro de Negocios Tartessos
MPG and the EC regulation
93/42/EEC.
Edificio Artemisa
C/Pollensa, n° 2 – Oficina 3
28290 Las Rozas (Madrid)
Phone +34 (0) 91 6 40 45 14
The products may only be used Fax +34 (0) 91 6 36 63 05
for their intended purpose of use. schmitz@schmitz.es
Please also observe our operating
Italy
manual!
SCHMITZ ITALIA S.r.l.
Daniela Capeletti
Piazza Garibaldi 20
15076 Ovada (AL)
Phone +39 (01 43) 8 03 50
Fax +39 (01 43) 83 42 53
Mobile349-6338723
info@schmitz-italia.it
www.schmitz-italia.it
Russia and Eastern Europe The complete Schmitz-products range
Schmitz u. Söhne GmbH & Co. KG
DIAMOND
OPX mobilis®
Sergey Kosolapov
A class of its own
Operating
Tables
Bornaische Str. 180
for Outpatient Departments
04279 Leipzig
and Operating Theatres
Germany
Unique Flexibility
Phone +49 (0) 3 41 3 37 80 34
and Reliability
Fax +49 (0) 3 41 3 37 80 35
Mobile+49 (0) 1 52 0 90 77 05 8
kosolapov@schmitz-soehne.de
Middle East
Schmitz u. Söhne GmbH & Co. KG
Mohammad Abu Khurma
Phone +966(0)504230849
Fax
+49 (0)2377 84 135
m.khurma@schmitz-soehne.de
China
Schmitz (Guangzhou)
Trading Co. Ltd.
World Trade Centre
North Tower 2501
Huan Shi East Road 371-375
Guangzhou 510095
Phone +86 (0) 20 87 61 33 01
Fax +86 (0) 20 87 60 39 23
info@schmitz-soehne.cn
Latin America
Schmitz u. Söhne GmbH & Co. KG
Alfredo Gentile
Av. Córdoba 1513 Piso 8, Oficina A
Buenos Aires, Argentina
Phone +54 (0)11 4811 4642
Fax +54 (0)11 4811 4642
Mobile0911 6887 2086
gentile@schmitz-soehne.de
varimed®
The functional trolleys –
our experts for everyday
clinical practice
Accessories
for DIAMOND
and OPX mobilis®
operating tables
STL 285, STS 282, STX 280
The Patient Transport
Systems for Emergencies,
Outpatient Depts.,
Intensive Care and X-Ray
varimed®
Furniture for OR theatres
and outpatient departments
varimed®
Medical Furniture
for Examination and
Treatment Areas
Partura®
The Schmitz delivery table
comfortable and
safe delivery – with focus
on preventive obstetrics
/schmitz.soehne
ertifi
cc. to
ed a
8
:200
have O 9001 :2003
We
5
IS
8
E N O 134 9
0
E N IS AC:20
+
c
been
Our goods and services are to be understood ex works. Deliveries are effected via our authorized partners or branch offices. The company reserves
the right to alter the design, construction, dimensions and finish of its products without notice. Due to technical reasons minor colour deviations are possible.
Schmitz Catalogue No. 75, 01.2015 E