ÿþL G B a s i c K E I n s t r u c t i o n . x l s

J Jones Trading As
Specialist in all types of
locks , safes & vaults
opening, repairing,
supply & fitting.
Domestic, commercial,
Emergency service
Private Address
35 Nursery Road
Hoddesdon
Hertfordshire
EN11 9LB
La Gard Basic Series Instructions
Factory set combination 1-2-3-4-5-6
Wrong Try Penalty & Signals
Four consecutive invalid combinations initiates a five minute delay period.
* Double signal - two LED flashes and two beeps - indicates entry is valid or accepted.
* Triple signal - three LED flashes and three beeps - indicates invalid or not accepted.
Opening the lock
Enter valid six digit combination, two LED flashes and two beeps, Then turn the dial right untill it stops
Changing The Combination
Always perform this operation with th door open & the lock locked.
1) Enter "zero" six times.
2) Enter your existing six digit combination one time
3) Enter your new six digit combination two times
4) If a mistake is made wait thirty seconds and repeat steps 1 - 3
5) Test lock operation several times before closing the door