1. home and garden
2. home furnishings
3. lamps and lighting

Prospex® Focus 60 Accent
063-XSM
Both fixed and adjustable variations.
Deep recessed lamp with black internal baffle for
minimal glare.
IP54 versions available.
White and Black finish as standard. Black internal
baffle as standard.
Ref Number:
063-XSM-WH
063-XSM-BK
White (RAL 9010)
Black (RAL 9005)
Lamp quantity
Lamp
1
Xicato Range
Module Type
max output
max wattage
max driver
XSM
1000lm
13w
1050mA
XSA
700lm
13.4w
700mA
XVM80
XVA98
Module Type
max output
max wattage
max driver
XTM
1300lm
11.7w
700mA
XTA
1300lm
15.6w
700mA
XTV83
1300lm
11.7w
700mA
XTV98
1300lm
15.6w
700mA
Module Type
max output
max wattage
max driver
XIM
1300lm
13.1w
360mA@48v
XIV83
1300lm
13.1w
360mA@48v
www.lucent-lighting.com
Adjustable
Aperture
Overall dimension
Overall height
Required depth
First fix requirement*
Ceiling cut out
Ceiling thickness
Ingress protection**
Dimming options***
35°****
37mm Ø
67mm Ø
150mm
175mm
Yes
62mm Ø*
25mm MAX
IP20
Phase/DALI/1-10v
Cut out 62Ø*
Luminaire and LED module to be specified separately.
*First Fix requirement. Luminaire supplied separate installation ring, to be fitted into finished
ceilings. Cut out dimensions reflect diameter required for the installation ring.
**IP Rating. Tested from underside of the ceiling.
***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it
remains the responsibility of the specifier/installer to check and ensure compatibility of any control
used.
may beceilings.
required depending on the dimming protocol specified.
* equipment
Separate die
castAdditional
plaster in cabling
kit for plaster
In ceilings
over 12.5mm
theIP44;
angleadd
of tilt
willtobe
restricted.
******Adjustment.
Tested from ceiling
underside.
To specify
'-IP'
end
of code.
*** Dimming options depend on driver (to be separately ordered/specified).
It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or
Some
control methods
may require additional cabling
withdraw
specifications
without prior notice.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
Lucent
reserve
the right
change
anyproduct
details,
dimensions
colours
etc without
priorbynotice.
Anytoreproduction
of Ltd.
All intellectual
property
rights to
pertaining
to the
described
above and
to this document
are owned
or licensed
Lucent Lighting UK
Lucent
products
forbidden
willthose
be pursued!
We reserve
our rightistostrictly
take whatever
action ..
is perpetrators
necessary to protect
intellectualInformation
property rights. correct as of May 2012.
Europe
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
China
Quantity
Russia
Lucent Xicato LED Modules.
XSM/XAM/XVM LED Modules.
Versions available with colour rendering indices of ≥80 or ≥95 (Artist versions), and for CCT
of 2700K, 3000K, 3500K & 4000K in lumen packages ranging from 400lm to 4000lm, please
see table on opposite page for available combinations.
Vibrant modules (XVM) are tuned to enable people to see a more saturated and vivid
colours. Vibrant modules are only available in CCT 3000K.
Requiring a remote driver of maximum drive current of 700mA or 1050mA depending on
the module type. Modules can be under run to achieve different lumen outputs.
Dimmable drivers can be used with all modules, consult with Lucent Lighting for dimming
protocols available.
3 different reflector sizes can be used, depending on the fixture specified, 50mmØ, 70mmØ
& 111mmØ in beam angles between 14.5° (111Ø) and 60° (50 & 70Ø). Versions can be used
with all ProSpex luminaires with –XSM in the code. Please refer to luminaire matrix for
details.
Full details and specifications are available from our website www.lucent-lighting.com
XTM/XTA/XTV LED Modules.
Versions available with colour rendering indices of 83 or 98 (Artist versions), and for CCT of
2700K, 3000K, 3500K & 4000K in lumen packages 1300lm, 2000lm & 3000lm, with 4000lm
and 5000lm versions available early 2015. Please see table on opposite page for available
combinations.
83 CRI version have a module lumen per watt value >100.
Vibrant modules (XTV) are tuned to enable people to see a more saturated and vivid
colours. Vibrant modules are only available in CCT 3000K.
Requiring a remote driver of maximum drive current of 700mA or 1050mA depending on
the module type and 1400mA for 4000lm & 5000lm modules. Modules can be under run to
achieve different lumen outputs.
Dimmable drivers can be used with all modules, consult with Lucent Lighting for dimming
protocols available.
3 different reflector sizes can be used, depending on the fixture specified, 50mmØ, 70mmØ
& 111mmØ in beam angles between 15° (111Ø) and 57° (70Ø).
Available early 2015, 70mmØ Precision optics offering uniform, high centre-beam intensity,
with low field-to-beam ratios with no colour over angle. Available in beam angles 24°, 34°
and 46°.
Versions can be used with all ProSpex luminaires with –XSM in the code. Please refer to
luminaire matrix for details.
Full details and specifications are available from our website www.lucent-lighting.com
www.lucent-lighting.com
XIM/ XIV LED Modules.
Available in Standard and Vibrant versions CRI83, and for CCT of 2700K, 3000K, 3500K &
4000K in lumen packages 1300lm & 2000lm. Please see table on opposite page for
available combinations.
Vibrant modules (XIV) are tuned to enable people to see a more saturated and vivid
colours. Vibrant modules are only available in CCT 3000K.
Modules are with on-board DC driver technology, requiring an external 48v DC supply.
DALI and 1-10v versions can be specified. Flicker free, smooth dimming 100% to 0.1% DALI
or 100% to 1% 1-10v.
3 different reflector sizes can be used, depending on the fixture specified, 50mmØ, 70mmØ
& 111mmØ in beam angles between 15° (111Ø) and 57° (70Ø).
Available early 2015, 70mmØ Precision optics offering uniform, high centre-beam intensity,
with low field-to-beam ratios with no colour over angle. Available in beam angles 24°, 34°
and 46°.
Versions can be used with all ProSpex luminaires with –XSM in the code. Please refer to
luminaire matrix for details.
Full details and specifications are available from our website www.lucent-lighting.com
XTA9/XTV9-98 LED Modules.
Available early 2015.
Modules of the same construction and specification as the XTM module series but with a
smaller 9mm light emitting surface.
Precision optics for the 9mm LES in 50mmØ, 70mmØ offering uniform, high centre-beam
intensity, with low field-to-beam ratios with no colour over angle. Available in beam angles
10° (70Ø) to 46°.
Versions can be used with all ProSpex luminaires with –XSM in the code. Please refer to
luminaire matrix for details.
Full details and specifications will be available from our website www.lucent-lighting.com




















Stand-alone LED module IP66
Colour Consistency:
XSM/XAM ≤ 1 x 2 Step McAdam along BBL
XVM ≤ 1 x 2 Step McAdam below BBL
Colour Consistency – Maintained: C3 50,000hrs
Lumen Maintenance: L80 50,000hrs (L70 50,000hrs XVM)
Colour Rendering Index:
XSM RA ≥ 80
XAM RA ≥ 95. R9 ≥90, R15 ≥95 (R9 3500K, 4000K ≥ 85)
XVM80 RA ≥ 80. R9 16, R12 62 (typical)
Gamut Area Index Black Body (GAIBB 111)
XVM95 RA ≥ 95. R9 90, R12 97 (typical)
Gamut Area Index Black Body (GAIBB 120)
19mm Light Emitting Surface.
Colour Consistency:
XTM/XTA ≤ 1 x 2 Step McAdam along BBL
XTV ≤ 1 x 2 Step McAdam below BBL
Colour Consistency – Maintained: C3 50,000hrs
Lumen Maintenance: L80 50,000hrs
Colour Rendering Index:
XTM RA 83
XTA RA 98. R9 ≥90, R15 ≥95
XTV80 RA 83. R9 16, R12 62 (typical)
Gamut Area Index Black Body (GAIBB 111)
XTV95 RA 98. R9 ≥90, R15 ≥95
Gamut Area Index Black Body (GAIBB 120)
19mm Light Emitting Surface.
Colour Consistency:
XIM ≤ 1 x 2 Step McAdam along BBL
XIV ≤ 1 x 2 Step McAdam below BBL
Colour Consistency – Maintained: C3 50,000hrs
Lumen Maintenance: L80 50,000hrs
Colour Rendering Index:
XIM RA83 (typical).
XIV RA8. R9 16, R12 62 (typical)
Gamut Area Index Black Body (GAIBB 111)
9mm Light Emitting Surface.
Colour Consistency:
XTA9 ≤ 1 x 2 Step McAdam below BBL
XTV9 ≤ 1 x 2 Step McAdam below BBL
Colour Consistency – Maintained: C3 50,000hrs
Lumen Maintenance: L80 50,000hrs
Colour Rendering Index:
XTA9 RA 98 (typical). R9 ≥90, R15 ≥95
XTV995 RA 98 (typical). R9 ≥90, R15 ≥95
Gamut Area Index Black Body (GAIBB 111)
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or
***
Dimming
options
depend
on driver (to be separately ordered/specified).
withdraw
specifications
without
prior notice.
Luminaires
to comply
with EN60598
and all other
relevant Standards.
Somedesigned
control
methods
may require
additional
cabling
This Specification Sheet supersedes all previous versions
All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the
to change
details,todimensions
without
prior notice.
We reserve
our right
to right
take whatever
actionany
is necessary
protect those colours
intellectualetc
property
rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity
Lucent Xicato LED Modules with 50mmØ Reflectors
Module Code Builder.
Module
XSM
XAM
XVM80
XVM95
XTM
XTA
XTV83
XTV98
XIM
XIV
XTA9
www.lucent-lighting.com
XTV9
≥80
≥80
≥80
≥80
≥80
≥80
≥80
≥95
≥95
≥95
≥95
≥80
≥95
≥80
≥95
≥80
83
83
83
83
83
98
98
83
98
83
98
83
98
98
83
83
83
83
98
98
98
98
98
98
5000lm
4000lm
3000lm
2000lm
1300lm
1000lm
700lm
CRI
400lm
Type
Lumen output at maximum drive current.
Colour
Reflector (50Ø)
temp (K)
Beam angle (°)
27/30/40
27/30/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
30
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/40/60
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
15/22/34/46
15/22/34/46
15/22/34/46
15/22/34/46
15/22/34/46
15/22/34/46
Indicates modules available
in the range.
Refer to the luminaire
specification for maximum
modules permitted.
and RED text Indicates
modules available for
specification now. (product
available early 2015)Refer to
the luminaire specification
for maximum modules
permitted.
5
Xictao Module Type
Required.
Heatsink.
(Blank) - Passive Heatsink
AF - Active Heatsink
(Refer to luminaire speification
sheet)
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Colour temperature required
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Diameter of reflector (50mm)
Beam angle required.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity