1. No category

Current Probe
The F-10 is used to measure currents on 50Hz, 60Hz, and
400 Hz power lines. The F-10 current probe has a
transfer impedance of .25Ω from 2kHz to 2MHz. The F10 has a usable frequency range overlapping the
fundamental powerline frequencies. It can handle 350
amperes of primary power line currents from DC to 400
Hz without saturation.
-1 3
-2 3
-2 8
F-10
Tranfer Impedance (dB ohms)
-1 8
-3 3
-3 8
-4 3
10H z
100H z
1kH z
10kH z
F re q u e n c y
100kH z
1M H z
10M H z
F-10 Specifications
Frequency:
Internal diameter:
External diameter:
Height:
ZtΩ1:
dBΩ1:
100 Hz – 3 MHz
32mm
94mm
64mm
0.25
−12
Connector: Type-N
DC to 60 Hz: 350 amperes
400 MHz:
350 amperes
RF(CW):
100 amperes
Pulse2:
100 amperes
1: Probe calibrated with 50Ω+j0Ω Load Impedance
2: Depends upon the pulse width and pulse rep. Rate.
Fischer Custom Communications, Inc.
20603 Earl St., Torrance, CA 90503 · Phone: 310-303-3300 Fax 310-371-6268 · email: Sales@fischercc.com
© Fischer Custom Communications, Inc.
072803DS-F-10
All rights reserved • Printed in USA