Download Report

LINEAR ACTUATOR TECHNOLOGY
THE COMPLETE DESKLINE® PRODUCT RANGE
D Y N A M I C D AY S
CALL FOR
DYNAMIC DESKS
It is trendy to be on the move in today’s dynamic business world.
In many cases it is also a necessity. With the Internet and mobile
phones, we are constantly connected and communicating.
Our days are dynamic, where we think - and work - out of the
box like never before. So why should your desk be chained down,
when your mind is set free?
Say goodbye to the old stationary desks. While retro is in, sore
muscles and poor working conditions are most definitely out. A
height adjustable desk combines sleek styling and excellent ergonomic benefits to your workplace.
Available in countless shapes and materials, height-adjustable
desks can greatly improve an office environment. What’s more, a
height adjustable desk is quick to adapt to new assignments, just
like you. So stand up and spread your documents, making them
all visible at once. Or sit down, and examine one in particular,
making sure everything adds up.
After all, when your days are dynamic, shouldn’t your desk be
dynamic too?
Getting started
My job - and my new
desk - have great things
in store for me today
2
Quick discussion with a colleague
I have seen your proposal and will bring it
to the board. I have a couple of questions,
though. Can you explain this here?
Deep concentration
Emily is absolutely right. We can expand Factory 2 by 25%,
and still have enough funds to develop three new products
instead of only two. Now, when can they be ready?
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
MAKING THE RIGHT CHOICE
Solving one task in a particular way provides you with important
experience you can use later on. Your experience may even tell
you that a different approach is best for a different task.
We all need to make the right choices, whether at work or at
home. A height adjustable desk in the office adds another dimension. Top-quality results can come about easier when you choose
an advantageous working position.
The flexibility found in a height adjustable desk makes it possible
to select just the position the job calls for. Some say seeing is
believing. With height adjustable desks, however, trying is believing. Their flexibility is unparalleled, multiplying your opportunities
for success.
THE SOUND OF LINAK...
Benefits from sitting:
• Greater concentration when reading or writing
(vision and fine motor skills)
• Relaxed work tempo (lower pulse and breathing rate)
Benefits from standing:
• Fast reaction time (easier to move about)
• Dynamic working style (greater range of motion)
The finishing touches
Plan B is the better solution.
Calling colleagues standing as
this position makes it easier
to articulate your self.
Winding down
All right, that is done, that is done, and I am waiting to hear
from Benjamin regarding the plans. I had better write to
Elizabeth and give her a status report on the other project.
Heading home
Just have to pick up some
milk after I get the kids…
3
ERGONOMICS
AT
WORK
Like so many other creatures on this earth, we humans are
individuals of habit. And changing our daily routines is not
something the majority of us do willingly. However, we all know
that in order to improve our situation and create development
and growth - we need to continously make changes to our daily
routines.
Doctors as early as the late 1700’s became aware of muscular
and skeletal changes among workers who were required to
maintain specific working postures for extended periods of time.
Today, the link between particular job tasks and degenerative
ailments has been proven beyond any doubt by ergonomists.
They recommend height adjustable desks as vital pieces of
equipment in the daily workplace.
Read more about how electric height adjustable desks can
improve satisfaction and productivity on
www.ergo.human.cornell.edu
4
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
THE EMPLOYEE AS A PRIMARY RESOURCE
COSTS STRUCTURE
IN THE OFFICE
In an office, 80% of all expenditures are related to personnel.
Facilities, working materials, and furniture cover only 20%.
The employee is therefore the most important production factor
in the office.
In an office, 80% of the costs of
Thus, it is of special interest to the companies to maintain an
efficient production, and have it staffed by motivated people.
However, the human being is only productive when he/she is
healthy and satisfied with his/her job. A modern ergonomic
workstation has therefore become a prerequisite for good
performance in the office.
As the above sample calculation clearly shows, prevention is
better and less expensive than cure.
Equipment/
furniture
1.5%
Rooms/buildings
16.5%
Working
materials 2.5%
doing business go to salaries and
wages, leaving only 20% for the
facilities, supplies, and furniture.
Staff 80%
Source: Sauer & Sauer, www.arbeitsplatzoptimierung.de
AN INVESTMENT THAT WILL PAY OFF
The costs of a day of
2500
absenteeism due to illness for an employee are
2000
approx. EUR 250.- with
1500
220 working days per
1000
year. The additional costs
500
for a healthy workplace
amount to approx. EUR
700.- meaning that only
0
0
1
2
3
4
5
6
7
8
Days of absenteeism due to illness
3 days of absenteeism
equals the cost of a desk.
Costs of illness
Additional costs for Sit-stand
Source: Sauer & Sauer, www.arbeitsplatzoptimierung.de
Benefits from the use of an electrical height adjustable desk:
Advantages to the employee
Advantages to the company
• Fewer chronic problems
• Improved working environment
• Avoidance of monotonous postures
•
•
•
•
•
•
•
•
•
• Activation of heart, circulation, and
the intestinal system
• Prevention of muscle inactivity
• Circulation of the disc tissue
• Comfortable working posture
• Better comfort = higher degree of satisfaction
Increased motivation and job satisfaction
Increased performance and efficiency
Long-term decrease of absenteeism due to illness
Increased product and service quality
Improved internal communication and cooperation
Image upgrade for the company
Falling failure rate
Cost optimisation by means of desk sharing
A more dynamic and efficient working style
5
DL1
DL1
• High lifting capacity
• High speed level
• Compact and robust
design
• Slim design
The DL1 was the first LINAK DESKLINE lifting column specially designed
for office desks and workstations. It was introduced to the market in
1998, but keeps on proving its outstanding performance even today.
The system is based on a 2-part
lifting unit, where the actuator
function and guide are integrated.
The DL1 has a sturdy and robust design, which is optimal especially for a
various range of workstations where a high lifting capacity is needed.
It is a perfect choice no matter whether you need single or parallel drive
of your desk.
Max. thrust:
Max. speed:
Stroke length:
1600 N
43 mm/s
500 mm
A DL1 system offers a wide range of options like memory and mains cutoff, but also options for extra safety purposes such as anti-squeeze.
DP
The DP Desk Panel is a compact unit,
which offers you a choice of memory with
up to 4 memory positions. Furthermore,
the DP is available in different versions
offering e.g. a lock function (with key)
and different colours or front covers.
DPA
DPB
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
The DPB desk panel is a compact
unit with an angled front. The DPB
can either be mounted directly under
the desk or placed in a drawer.
CBD3
6
The CBD3 is a microprocessor based
control box for DL1, which ensures
parallel drive. The CBD3 has a wide range
of options such as memory, mains cut-off,
and different software configurations.
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
DL2/LA31
DL2
DL2
• High speed level
• Possibility to integrate
the control box inside
the DL2 (CBD2)
SINGLE COLUMN SYSTEM
The DL2 single column is the strong
and silent type. Behind the stylish
and installation-friendly design,
there is an advanced product with
plenty of power and possibilities.
For an elegant design it is possible
to integrate the control box (CBD2)
in the column.
LA31
• High lifting capacity
The LA31 system form the basic set to make the existing
desks height adjustable without having to completely redesign
them. Another possibility is to integrate the LA31 systems in a
customised guidance giving the optimum design freedom. With
an LA31 system you get a heavy-duty system, which is the perfect
choice where a heavy lifting force is required.
The LA31 systems are available in many standard variants,
fulfilling all kinds of performance demands.
DP
The DP Desk Panel is a compact unit,
which offers you the choice of memory
with up to 4 memory positions. Furthermore, the DP is available in different
versions offering e.g. lock function (with
key) and different colours or front covers.
LA31
ACTUATOR SYSTEM
Max. thrust:
Voltage:
Max. speed:
6000 N
12/24 V DC
43 mm/s
Max. thrust:
Max. speed:
Stroke length:
DPA
DPB
The DPA Desk Panel is a compact panel
for adjusting the desk. The DPA is a
flexible unit, which can be mounted in
different ways and adjusted in different
positions.
The DPB desk panel is a compact unit
with an angled front. The DPB can either
be mounted directly under the desk or
placed in a drawer.
CBD2
CBD4
The CBD2 control box is especially
developed for use together with the
DL2 column and the LA31 actuator.
The CBD2 is available with or without microprocessor.
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory, and a very low noise level.
The mains cable is exchangeable.
A system consists of one to four
columns running independently or
in parallel. The DL2 column system
is the ideal choice for heavy duties
such as height adjustment of e.g.
heavy computer workstations,
workbenches, and many other
applications.
1500 N
43 mm/s
500 mm
7
DESKPOWER™
SYSTEM
DL4
DB4
With the DL4 column, LINAK offers
a 3-part column with an integrated
motor ensuring an optimum design
freedom. The column is available in
2 standard colours (black or grey),
but can be ordered in any colour
you like (RAL codes) (option).
The motor cable is exchangeable.
• High speed level
• Low pleasant noise level
• High adjustment range
• Slim and compact design
Max. thrust:
Max. speed:
Stroke length:
800 N
43 mm/s
675 mm
The DB4 is a 3-part built-in
actuator, which must be integrated in a customer guidance.
The integrated motor offers total
design freedom. The motor cable
is exchangeable.
The DESKPOWER™ system is a DESKLINE system, which offers
innovative products that live up to the latest market demands. The
integrated motor in both the DL4 and the DB4 provides you with a
high degree of design freedom.
A DESKPOWER™ system is available as e.g. single, 2, 3, or 4 parallel,
or a combination of parallel and single channels. The hallmarks of the
systems are an optimised noise level, a slim design, and a high speed
level, which are keywords for office furniture.
It is possible to connect up to 16 columns in parallel drive when using
4 control boxes (multiparallel system) e.g. for large conference desks.
Max. thrust:
Max. speed:
Stroke length:
1000 N
43 mm/s
675 mm
CBD4
CBD5
DP
DPA
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory, and a very low noise level.
The mains cable is exchangeable.
The CBD5 design has the same width as
the housing of the DL5, DL6, DL9, DL11
legs and the DB5, DB6, DB9 built-in
actuators, which enables designing a top
frame where legs and control box fit in.
The DP Desk Panel is a compact unit,
which offers you the choice of memory
with up to 4 memory positions. Furthermore, the DP is available in different
versions offering e.g. a lock function
(with key) or display.
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
DP1V
HB21
WDPL
DPB
Based on infrared communication.
As a further option an extension
eye can be mounted.
Based on infrared communication. Is
especially useful in applications such
as furniture for flat screens.
Remote control for DP1V.
The WDPL is a display panel that
offers the user(s) up to 9 memory
positions and control of up to 3 independent desks, just to name a few
features.
8
The DPB desk panel is a compact unit
with an angled front. The DPB can
either be mounted directly under the
desk or placed in a drawer.
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
DL5/DL6
DL5
DL6
Based on the well-known DL1
system, but optimised for office
solutions, best describe DL5/DL6.
The DL5 is a 2-part column with
the same outer dimensions as
the well-known DL1 column. The
DL5 has a compact, flat motor
housing and is equipped with an
exchangeable motor cable.
With the same outer profile dimensions whether you choose a DL5
2-part or a DL6 3-part system, it is
easier than ever to create a frame
that fits to all needs. Both systems
are compatible with the CBD4 and
the CBD5 control boxes ensuring
an optimised pleasant noise level as
well as parallel drive and memory.
The columns are available in 2
standard colours (black or grey),
and other colours as an option.
Max. thrust:
Max. speed:
Stroke length:
800 N
38 mm/s
500 mm
The DL6 is a 3-part column with
a small compact motor housing.
The guidance has the same
outer dimension as the 2-part
DL5 column ensuring the same
frame construction. The motor
cable is exchangeable.
Max. thrust:
Max. speed:
Stroke length:
1200 N
38 mm/s
650 mm
DP
• Low pleasant noise
level
It is possible to connect up to 16
columns in parallel drive when
using 4 control boxes (multiparallel
system).
• Same outer profile
dimensions
• Numerous colour
options
The DP Desk Panel is a compact unit,
which offers you the choice of memory with up to 4 memory positions.
Furthermore, the DP is available in
different versions offering e.g. a lock
function (with key) or display.
CBD4
CBD5
DPA
DPB
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory, and a very low noise level.
The mains cable is exchangeable.
The CBD5 design has the same width as
the housing of the DL5, DL6, DL9, DL11
legs and the DB5, DB6, DB9 built-in
actuators, which enables designing a top
frame where legs and control box fit in.
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
The DPB desk panel is a compact unit
with an angled front. The DPB can
either be mounted directly under the
desk or placed in a drawer.
WDPL
HB21
DP1V
The WDPL is a display panel that
offers the user(s) up to 9 memory
positions and control of up to 3
independent desks, just to name a
few features.
Based on infrared communication. Is
especially useful in applications such
as furniture for flat screens.
Remote control for DP1V.
Based on infrared communication.
As a further option an extension
eye can be mounted.
9
DL7/DL7R
DL7R
DL7
• Basic column system
DL7/DL7R
• Upside down solution
- no crossbar
Max. thrust:
Max. speed:
Stroke length:
800 N
34 mm/s
470 mm
• Numerous colour
options
DP
The DL7 DESKLIFT is the first LINAK basic column, which combines a wellproven technology and basic features into a price-performance optimised
low-cost 2-part column. The DL7 column is developed for desks where the
basic features of an electrical height adjustable desk are required. The column
is available with a regtangular or a round profile. The DL7 system is primarily
intended for 2 parallel applications. The upside down construction gives a
very compact and clean design and is very stable even though a crossbar is
not needed.
The DP Desk Panel is a compact unit,
which offers you the choice of memory with up to 4 memory positions.
Further-more, the DP is available in
different versions offering e.g. a lock
function (with key) or display.
CBD4
CBD5
DPA
DPB
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory, and a very low noise level.
The mains cable is exchangeable.
The CBD5 design has the same width as
the housing of the DL5, DL6, DL9, DL11
legs and the DB5, DB6, DB9 built-in
actuators, which enables designing a top
frame where legs and control box fit in.
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
The DPB desk panel is a compact
unit with an angled front. The DPB
can either be mounted directly
under the desk or placed in a
drawer.
DP1V
HB21
WDPL
Based on infrared communication.
As a further option an extension
eye can be mounted.
Based on infrared communication.
Is especially useful in applications
such as furniture for flat screens.
Remote control for DP1V.
The WDPL is a display panel that offers
the user(s) up to 9 memory positions
and control of up to 3 independent
desks, just to name a few features.
10
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
DL9/DL11
DL11
DL9
The DL9 and DL11 are round 3-part
columns. Besides the round guidance,
the columns are based on the wellknown DL5/6 motor housing and a
new 3-part built-in actuator - the DB9.
The upside down construction of the
DL9 gives a very compact and clean
design, which also appears from the
fact that the system is without a
crossbar.
The DL11 column, with the largest
profile downwards, is also for systems
without crossbar. The column is
strengtend with a reinforced motor
housing ensuring stability.
The columns are compatible with the
standard CBD4 and CBD5 control
boxes ranges ensuring a very low and
pleasant noise level and a wide range
of options.
It is possible to connect up to 16
columns in parallel drive when using 4
control boxes (multiparallel system).
DL9
Max. thrust:
Max. speed:
Stroke length:
DL11
800 N
38 mm/s
650 mm
Max. thrust:
Max. speed:
Stroke length:
800 N
38 mm/s
635 mm
DP
• Low pleasant noise level
• Elegant, round design
and compact motor
housing
• Numerous colour options
The DP Desk Panel is a compact unit,
which offers you the choice of memory with up to 4 memory positions.
Furthermore, the DP is available in
different versions offering e.g. a lock
function (with key) or display
• High stability even
without crossbar
• Syncronous drive of the
middle profile
CBD4
CBD5
DPA
DPB
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory and a very low noise level.
The mains cable is exchangeable.
The CBD5 design has the same width as
the housing of the DL5, DL6, DL9, DL11
legs and the DB5, DB6, DB9 built-in
actuators, which enables designing a top
frame where legs and control box fit in.
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
The DPB desk panel is a compact unit
with an angled front. The DPB can
either be mounted directly under the
desk or placed in a drawer
WDPL
HB21
DP1V
The WDPL is a display panel that
offers the user(s) up to 9 memory
positions and control of up to 3
independent desks, just to name a
few features.
Based on infrared communication.
Is especially useful in applications
such as furniture for flat screens.
Remote control for DP1V.
Based on infrared communication.
As a further option an extension
eye can be mounted.
11
DB5/DB6
DB6
DB5
The DB5 is a 2-part built-in
actuator, which must be integrated in a customer guidance.
The DB5 ensures optimum
freedom of design.
Exchangeable motor cable.
The DB6 is a 3-part built-in
actuator. With its compact design
and long stroke length, it ensures
a wide adjustment range.
Exchangeable motor cable.
Max. thrust:
Max. speed:
Stroke length:
Max. thrust:
Max. speed:
Stroke length:
800 N
38 mm/s
500 mm
The 2 built-in actuators DB5 and DB6 are based on well-known
LINAK technology, but with several new features and options. First of
all, the DB5 and DB6 have a compact steel motor housing making it
possible to fix the DB direcly to the frame. The DB’s are compatible
with the CBD4 and CBD5 control boxes ensuring an optimised noise
level as well as parallel drive and many other features and options.
It is possible to connect up to 16 columns in parallel drive when
using 4 control boxes (multiparallel system).
800 N
38 mm/s
650 mm
• Compact, steel motor
housing
• Low pleasant noise level
• Large adjustment range
• Slim design
CBD4
CBD5
DP
DPA
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory and a very low noise level.
The mains cable is exchangeable.
The CBD5 design has the same width as
the housing of the DL5, DL6, DL9, DL11
legs and the DB5, DB6, DB9 built-in
actuators, which enables designing a top
frame where legs and control box fit in.
The DP Desk Panel is a compact unit,
which offers you the choice of memory
with up to 4 memory positions. Furthermore, the DP is available in different versions offering e.g. a lock function (with
key) or display
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
HB21
DP1V
WDPL
DPB
Based on infrared communication.
Is especially useful in applications
such as furniture for flat screens.
12
Based on infrared communication.
As a further option an extension
eye can be mounted.
Remote control for DP1V.
The WDPL is a display panel that offers
the user(s) up to 9 memory positions
and control of up to 3 independent
desks, just to name a few features.
The DPB desk panel is a compact unit
with an angled front. The DPB can
either be mounted directly under the
desk or placed in a drawer.
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
DB9
DB9
The DB9 DESKLINE built-in actuator
is specially made for desks with a
wide adjustment range. The DB9 is
a 3-part telescopic built-in actuator
that is designed with a slim metal
motor housing to achieve a very
low installation dimension. The
DB9 built-in actuator is specially
designed for easy integration in the
customer‘s guidance, to achieve the
optimum freedom of design for desk
applications. The DB9 can either
run as a single, 2, 3 or 4 parallel
system or even multiparallel with up
to 16 actuators. The parallel drive is
constructed to compensate for an
uneven load on the desk by means of
the control box CBD4 or CBD5. The
control box is designed with a soft
start/stop function.
DB9
Max. thrust:
Max. speed:
Stroke length:
800 N
38 mm/s
650 mm
DP
• Low pleasant noise level
• Possible synchronous
drive of middle profile
• Long stroke length
The DP Desk Panel is a compact unit,
which offers you the choice of memory with up to 4 memory positions.
Furthermore, the DP is available in
different versions offering e.g. a lock
function (with key) or display
CBD4
CBD5
DPA
DPB
The CBD4 is an innovative microprocessor based control box, which
ensures an optimum parallel drive,
memory and a very low noise level.
The mains cable is exchangeable.
The CBD5 design has the same width as
the housing of the DL5, DL6, DL9, DL11
legs and the DB5, DB6, DB9 built-in
actuators, which enables designing a top
frame where legs and control box fit in.
The DPA Desk Panel is a compact
panel for adjusting the desk. The
DPA is a flexible unit, which can
be mounted in different ways and
adjusted in different positions.
The DPB desk panel is a compact unit
with an angled front. The DPB can
either be mounted directly under the
desk or placed in a drawer
WDPL
HB21
DP1V
The WDPL is a display panel that offers
the user(s) up to 9 memory positions
and control of up to 3 independent
desks, just to name a few features.
Based on infrared communication. Is
especially useful in applications such
as furniture for flat screens.
Remote control for DP1V.
Based on infrared communication.
As a further option an extension eye
can be mounted.
13
STANDARD COMBINATIONS
DESKLINE® PRODUCTS
200
300
400
428
450
50x80
X
X
X
X
X
50x80
X
X
X
X
X
470
500
Built-in dimensions (mm)
635
650
675
345
445
545
X
X
X
X
X
X
X
X
560
573
575
650
655
Profile/outer
tube dim. (mm)
Profile/outer
tube dim. (mm)
Profile design
Stroke length (mm)
OF
595
645
X
X
X
50x80
X
X
X
50x80
DL1
DL1
DL2
147x194
X
X
X
X
1147x194
DL4
57.8x109.2
X
X
57.8x109.2
DL5
50x80
X
X
50x80
DL6
50x80
X
X
50x80
50x80
X
X
50x80
DL6
DL7
50x80
X
X
50x80
ø70
X
X
ø70
DL7R
DL9
ø70
X
X
ø70
DL11
X
38
800
-
38
800
WDPL
20
DP
800
DPB
38
DPA
20
Multiparallel drive
up to 16 legs with
CBD4
1000
CBD5 compatible
(up to 3 channels
in parallel)
43
Controls
CBD4 compatible
(up to 4 channels
in parallel)
chain
ø70
Control boxes
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Single drive
Max. Thrust (N)
per leg
500 650 675 551 589 594 530 542 620
Max. speed
(mm/sec)
Built-in dimensions
(mm)
Spindle pitch
(mm)
Profile/outer
tube dim. (mm)
Profile design
Columns
Stroke length
(mm)
X
Aluminium tube Colour
ø70
DB4
54.2x86
X
X
DB5
30x30
X
X
DB6
30x30
X
ø45
X
X
DB9
14
X
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LINEAR ACTUATOR TECHNOLOGY
Single drive
CBD3 compatible
(up to 3 channels
in parallel)
DPA
DPB
DP
X
X
X
X
X
X
X
X
X
X
15
43
1000
X
X
X
X
X
X
X
X
X
X
X
X
12
50
1500
X
X
X
X
chain
43
800
X
X
X
X
X
20
38
800
X
X
X
X
2x10
38
800
X
X
X
2x6
23
1200
X
X
X
34
800
X
X
X
34
800
X
X
-
38
800
X
-
38
800
X
X
X
WDPL
Customised
brackets as option
X
Multiparallel drive
up to 16 legs with
CBD4
Without bracket
X
CBD5 compatible
(up to 3 channels
in parallel)
With bracket
1600
Multiparallel
drive of up to 6
legs with CBD3
Customised
colours as option
30
CBD4 compatible
(up to 4 channels
in parallel)
Black
(RAL 9005)
9
Aluminium tube
Grey
(RAL 9006)
Controls
Max. Thrust (N)
per leg
Control boxes
Max. speed
(mm/sec)
Mounting bracket
Spindle pitch
(mm)
Colour
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
The table gives you a general overview of features and combination possibilities of
the different DESKLINE products.
Please contact your local LINAK sales representative for further information.
15
WE PROVIDE INNOVATIVE ACTUATION SOLUTIONS THAT IMPROVE
PEOPLE’S QUALITY OF LIFE AND WORKING ENVIRONMENT
TERMS OF USE
The user is responsible for determining the suitability of LINAK products
for a specific application.
LINAK takes great care in providing
accurate and up-to-date information
on its products.
However, due to continuous development in order to improve its products, LINAK products are subject to
frequent modifications and changes
without prior notice. Therefore,
LINAK cannot guarantee the correct
and actual status of said information on its products. While LINAK
uses its best efforts to fulfil orders,
LINAK cannot, for the same reasons
as mentioned above, guarantee the
availability of any particular product. Therefore, LINAK reserves the
right to discontinue the sale of any
product displayed on its website or
listed in its catalogues or other written material drawn up by LINAK.
All sales are subject to the Standard
Terms of Sale and Delivery for LINAK.
For a copy hereof, please contact
LINAK
LINAK WORLDWIDE
FACTORIES
• CHINA
LINAK (Shenzhen) Actuator Systems, Ltd.
Phone: +86 755 8610 6656 . Fax: +86 755 8610 6990
E-mail: sales@linak.cn . www.linak.cn
• DENMARK
LINAK A/S . Group Headquarters Guderup
Phone: +45 73 15 15 15 . Fax: +45 74 45 80 48
Fax (Sales): +45 73 15 16 13
E-mail: info@linak.com . www.linak.com
• SLOVAKIA
LINAK Slovakia s.r.o.
Phone: +421 517563 414 . Fax: +421 517563 410
E-mail: jp@linak.sk . www.linak.com
• USA
LINAK U.S. Inc.
North and South American Headquarters
Phone: +1 502 253 5595 . Fax: +1 502 253 5596
E-mail: info@linak-us.com . www.linak-us.com
SUBSIDIARIES
• AUSTRALIA
LINAK Australia Pty. Ltd
Phone: +61 3 8796 9777 . Fax: +61 3 8796 9778
E-mail: sales@linak.com.au . www.linak.com.au
• AUSTRIA
LINAK GmbH
Phone: +43 2746 21036 . Fax: +43 2746 21044
www.linak.at
• BELGIUM & LUXEMBOURG
LINAK Actuator-Systems NV/SA
Phone: +32 (0)9 230 01 09 . Fax: +32 (0)9 230 88 80
E-mail: info@linak.be . www.linak.be
• BRAZIL
LINAK do Brasil Comércio de Atuadores Ltda.
Phone: +55 (11) 6832-7070 . Fax: +55 (11) 6832-7060
E-mail: linakbrasil@ig.com.br . www.linak.com.br
• CANADA
LINAK Canada Inc.
Phone: +1 905 821 7727 . Fax: +1 905 821 4281
E-mail: info@linak.ca . www.linak.ca
• CZECH REPUBLIC
LINAK C&S S.R.O.
Phone: +420581741814 . Fax: +420581702452
E-mail: ponizil@linak.cz . www.linak.cz
• DENMARK
LINAK DANMARK A/S
Phone: +45 86 80 36 11 . Fax: +45 86 82 90 51
E-mail: linak@linak-silkeborg.dk . www.linak.dk
www.linak.com
• FINLAND
LINAK OY
Phone: +358 10 841 8700 . Fax: +358 10 841 8729
E-mail: linak@linak.fi . www.linak.fi
• FRANCE
LINAK FRANCE S.A.R.L
Phone: +33 (0)2 4136 3434 . Fax: +33 (0)2 4136 3500
E-mail: linak@linak.fr . www.linak.fr
• GERMANY
LINAK GmbH
Phone: +49 6043 9655 0 . Fax: +49 6043 9655 60
E-mail: info@linak.de . www.linak.de
• INDIA
LINAK A/S India Liaison Office
Phone: +91 80 2299 6533 . Fax: +91 80 2224 3863
E-mail: info@linak.in . www.linak.in
• IRELAND
LINAK UK Limited
Phone: +44(0)121 544 2211 . Fax: +44(0)121 544 2552
E-mail: stephen@linak.co.uk . www.linak.co.uk
• ITALY
LINAK ITALIA S.r.l.
Phone: +39 02 48 46 33 66 . Fax: +39 02 48 46 82 52
E-mail: info@linak.it . www.linak.it
A HISTORY OF TRADITION
AND INNOVATION
• JAPAN
LINAK K.K.
Phone: +81 45 533 0802 . Fax: +81 45 533 0803
E-mail: linak@linak.jp . www.linak.jp
LINAK has gone through a remarkable
• MALAYSIA
LINAK A/S Asian Representative Office
Phone: +60 4 210 6500 . Fax: +60 4 226 8901
E-mail: info@linak-asia.com . www.linak-asia.com
• NETHERLANDS
LINAK Actuator-Systems B.V.
Phone: +31 76 5 42 44 40 . Fax: +31 76 5 42 61 10
E-mail: info@linak.nl . www.linak.nl
• NEW ZEALAND
LINAK New Zealand Ltd.
Phone: +64 9580 2071 . Fax: +64 9580 2072
E-mail: nzsales@linak.com.au . www.linak.co.nz
• NORWAY
LINAK Norge AS
Phone: +47 32 82 90 90 . Fax: +47 32 82 90 98
E-mail: info@linak.no . www.linak.no
• POLAND
LINAK Polska
Phone: +48 (22) 500 28 74 . Fax: +48 (22) 500 28 75
E-mail: dkreh@linak.com . www.linak.pl
• SPAIN
LINAK Actuadores S.L.
Phone: +34 93 588 27 77 . Fax: +34 93 588 27 85
E-mail: linakact@linak.es . www.linak.es
transformation since being established
back in 1907. When Bent Jensen, CEO
and Owner took over the company in
1976 he brought a brand new idea with
him. An idea which led to the development of the very first linear actuator
in 1980.
It soon became obvious that this new
invention had an even larger potential
than anyone could have imagined. The
linear actuator was going to facilitate
ergonomic improvements in workplaces
as diverse as offices, hospitals, comfort
furniture, farms, and industry.
Throughout this process of improvement and transformation, LINAK’s commitment to quality remains the same.
The quality of our products affect the
• SWEDEN
LINAK Scandinavia AB
Phone: +46 8 732 20 00 . Fax: +46 8 732 20 50
E-mail: info@linak.se . www.linak.se
quality of people’s lives, and we are
• SWITZERLAND
LINAK AG
Phone: +41 43 388 31 88 . Fax: +41 43 388 31 87
E-mail: info@linak.ch . www.linak.ch
according to the most demanding
• TAIWAN
LINAK A/S Taiwan Representative Office
Phone: +886 2 25080296 . Fax: +886 2 2508 3604
E-mail: info@linak.com.tw . www.linak-asia.com
• TURKEY
LINAK A/S Turkey Representative Office
Phone: +90 312 4726338-59 . Fax: +90 312 4726635
E-mail: vozen@linak.com.tr . www.linak.com.tr
very much aware of our responsibility.
All products are thoroughly tested
standards, and all assembly processes
utilize modern technologies.
As we have grown, so has our network
of international offices around the
world. Today we are present in 35
countries across the globe.
• UNITED KINGDOM
LINAK UK Limited
Phone: +44(0)121 544 2211 . Fax: +44(0)121 544 2552
E-mail: sales@linak.co.uk . www.linak.co.uk
DISTRIBUTORS
LINAK is represented in the following countries:
•
•
•
•
•
•
•
•
•
•
ARGENTINA
COLOMBIA
ESTONIA
INDONESIA
IRAN
MEXICO
RUSSIAN FEDERATION
SINGAPORE
SOUTH KOREA
UNITED ARAB EMIRATES
For contact details on other countries please visit
www.linak.com or contact:
• LINAK INTERNATIONAL
Fax: +45 74 45 90 10
E-mail: info@linak.com . www.linak.com
MA M9-02-130-U 2008.10 - Printer: grafisk arbejde as