TAIDEN-HCS-4360 Series Datasheets - AV-iQ

HCS-4100/50 Series Digital Congress System
HCS-4360CE/50 Chairman Unit with
Voting and Channel Selection
Functions
■
■
Compliant to IEC 60914
"Closed Loop - Daisy Chain" connection topology for a high
operational system reliability: breakdown or replacement of a
congress unit and connection failure of a cable will not
influence other congress units in the system
■
Based on TAIDEN originated MCA-STREAM digital audio
processing and transmitting technologies
■
Audio signals processed by high performance DSP: sound
quality approaching CD quality
■
Gain and EQ (5 band) of each microphone adjustable
separately, fitting the individual orator’s voice to achieve perfect
speech pickup any time
■
Transmitting up to 64 CHs high quality digital audio signals on
a dedicated 6-pin cable (general Cat.5 cable substitutable)
■
Supporting 48 kHz audio sampling rate, all 64 channels with a
frequency response of 30 Hz to 20 kHz
■
Features
■
■
Flush-mounting, stylish and ergonomic design
■
■
Hi-Fi loudspeaker
■
Priority button
■
■
Pluggable microphone
■
■
5 voting keys
■
“Closed Loop - Daisy Chain” connection topology
■
Transmitting up to 64 CHs high quality digital audio
signals on a dedicated 6-pin cable
■
■
Supporting 48 kHz audio sampling rate, all 64 channels
■
Automatic recovery facility, supporting "PnP" (plug and play)
Stem microphone can be unplugged during adjournment, easy
to maintain
Mini-microphone, with foam windshield
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
Excellent immunity to RF interference from mobile phones and
comparable devices
with a frequency response of 30 Hz to 20 kHz
■
Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch)
to cut low frequency elements from the audio when needed
Microphone On/Off button, 5 voting keys
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
Built-in channel selector consists of up/down channel
■
select buttons and 2-digit channel indicator display
Facilities in stand-alone operation:
™ Set the number of delegates permitted to speak at the same
■
Excellent immunity to RF interference from mobile phones
■
Gain and EQ (5 band) of each microphone adjustable
■
Supporting "PnP" (plug and play)
■
Equipped with cover to protect the unit from damage
time
™ Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT
separately
x "OPEN"
mode,
microphone
On/Off
button
with
request-to-speak registration (AUTO)
x "OVERRIDE" mode, microphone On/Off button control
during the adjournment
with override of the active microphones (FIFO)
x "VOICE" mode, acoustic active sensitivity and automatic
switch-off time adjustable continuously, built-in “flash-on”
The stylish and ergonomically designed chairman unit has all the
technology, immediate microphone activation on speaking
necessary facilities to enable the user to chair a conference. It has
x “APPLY” mode, delegate applies to speak by pressing
excellent immunity to RF interference from mobile phones. Similar
microphone On/Off button, delegate only speaks when
in
appearance
to
HCS-4360DE/50
Delegate
Unit,
operator or chairman approved his application
the
x "PTT" mode, press microphone On/Off button to talk
HCS-4360CE/50 Chairman Unit includes a microphone priority
™ Voting function (Yes/No/Abstain)
button. When pressed, the priority button causes all currently active
delegate
microphones
to
be
switched
off
temporarily
™ Simultaneous interpretation
or
■
permanently, allowing the chairman to take control of the meeting.
Multiform voting in combination with the corresponding
The chairman unit can also be used to start or stop voting, turn off
software modules:
all active microphones. Channel selection is automatically limited to
™ For/Against
the number of language channels available. The loudspeaker offers
™ Parliamentary: YES/NO/ABSTAIN
superior acoustics with minimal feedback for enhanced intelligibility.
™ Questionnaire: 1/2/3/4/5
™ Audience response: --/-/0/+/++
™ Parliamentary (NPPV): YES/NO/ABSTAIN/NPPV
5.45
HCS-4100/50 Series Digital Congress System
Mechanical
™ Appraisal:
Mounting
ƒ Satisfied (Four keys voting:
Flush-mounting
Dimensions (h x w x d) (w/o stem mic.)
perfectly satisfied/satisfied/basically satisfied/unsatisfied)
57 x 220 x 100 mm
0.72 kg
Weight (incl. stem microphone)
(Three keys voting:
Charcoal gray
Color
satisfied/basically satisfied/unsatisfied)
410 mm (standard version),
Stem length
(Two keys voting: satisfied/unsatisfied)
240 mm, 330 mm, 470 mm
ƒ Qualified (four/three/two keys voting)
ƒ Competent (four/three/two keys voting)
■
Built-in IC-card reader
■
Key-press sign-in
Ordering Information
Automatic video tracking implementation when cooperating
HCS-4360CE/50
■
■
(flush-mounting, 5 voting keys, IC-Card, 64
Activation at any time (if the amount of active microphones in
CHs, cover, charcoal gray)
the system is less than 6)
■
Priority button to switch off or to mute the speaking units
according to preset (except VIP)
■
Approves/denies delegates' speaking request
■
Controls voting start and stop
■
System supports up to 100 chairman units, while only 1
chairman unit has the control facilities listed above (set by
software)
Controls and Indicators
■
Built-in channel selector consists of up/down channel select
buttons and 2-digit channel indicator display
■
Fully Digital Congress System Chairman Unit
with cameras, video switcher unit; preset positions on PC
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
■
Headphone volume up and down
■
Five voting keys with indicators
■
Microphone On/Off button with indicator
■
Priority button
Interconnections
■
Socket for pluggable microphone
■
Ø 3.5 mm stereo headphone jack
■
1.5 m cable with 6P-DIN plug
■
0.6 m cable with 6P-DIN socket
Technical Specifications
Electrical
Max. consumption
Headphone connection
Frequency response
Earphone load impedance
Earphone output
Recommended microphone type
Transducer
Polar pattern
Operating voltage
Sensitivity
Frequency response
Input impedance
Directivity 0°/180°
Equivalent noise
1.8 W
30 Hz to 20 kHz
>16 Ohm
10 mW
Electret-condenser
Uni-directional
5 VDC
-46 dBV/Pa
50 Hz to 20 kHz
2 kOhm
> 20 dB (1 kHz)
20 dBA (SPL)
125 dB (THD<3%)
Maximum sound pressure level
Interface data
Ø 3.5 mm stereo jack for headphone
Connector
5.46
HCS-4100/50 Series Digital Congress System
HCS-4360DE/50 Discussion Unit
with Voting and Channel Selection
■
Gain and EQ (5 band) of each microphone adjustable
separately, fitting the individual orator’s voice to achieve perfect
speech pickup any time
■
Transmitting up to 64 CHs high quality digital audio signals on
a dedicated 6-pin cable (general Cat.5 cable substitutable)
■
Supporting 48 kHz audio sampling rate, all 64 channels with a
frequency response of 30 Hz to 20 kHz
■
Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch)
to cut low frequency elements from the audio when needed
■
■
Automatic recovery facility, supporting "PnP" (plug and play)
Stem microphone can be unplugged during adjournment, easy
to maintain
■
■
Mini-microphone, with foam windshield
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
Excellent immunity to RF interference from mobile phones and
comparable devices
■
■
Flush-mounting, stylish and ergonomic design
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
5 voting keys
■
“Closed Loop - Daisy Chain” connection topology
■
Transmitting up to 64 CHs high quality digital audio
■
Supporting 48 kHz audio sampling rate, all 64 channels
■
Built-in channel selector consists of up/down channel
time
™ Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT
x "OPEN"
Excellent immunity to RF interference from mobile phones
Gain and EQ (5 band) of each microphone adjustable
Supporting "PnP" (plug and play)
■
Equipped with cover to protect the unit from damage
On/Off
button
with
with override of the active microphones (FIFO)
x "VOICE" mode, acoustic active sensitivity and automatic
switch-off time adjustable continuously, built-in “flash-on”
technology, immediate microphone activation on speaking
x “APPLY” mode, delegate applies to speak by pressing
microphone On/Off button, delegate only speaks when
operator or chairman approved his application
separately
■
microphone
x "OVERRIDE" mode, microphone On/Off button control
select buttons and 2-digit channel indicator display
■
mode,
request-to-speak registration (AUTO)
with a frequency response of 30 Hz to 20 kHz
■
Facilities in stand-alone operation:
™ Set the number of delegates permitted to speak at the same
signals on a dedicated 6-pin cable
■
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
Features
■
Microphone On/Off button, 5 voting keys
x "PTT" mode, press microphone On/Off button to talk
™ Voting function (Yes/No/Abstain)
™ Simultaneous interpretation
during the adjournment
■
Multiform voting in combination with the corresponding
software modules:
™ For/Against
The multi-functional delegate unit meets the demands of even the
™ Parliamentary: YES/NO/ABSTAIN
largest conferences. It provides facilities for speaking, listening,
™ Questionnaire: 1/2/3/4/5
voting, selecting language channels and IC-card reading. It has
™ Audience response: --/-/0/+/++
excellent immunity to RF interference from mobile phones. It
™ Parliamentary (NPPV): YES/NO/ABSTAIN/NPPV
features a channel selector and an IC-card reader. Channel
™ Appraisal:
selection is automatically limited to the number of language
ƒ Satisfied (Four keys voting:
channels available. The loudspeaker offers superior acoustics with
perfectly satisfied/satisfied/basically satisfied/unsatisfied)
minimal feedback for enhanced intelligibility.
(Three keys voting:
satisfied/basically satisfied/unsatisfied)
(Two keys voting: satisfied/unsatisfied)
Functions
ƒ Qualified (four/three/two keys voting)
ƒ Competent (four/three/two keys voting)
■
Compliant to IEC 60914
■
"Closed Loop - Daisy Chain" connection topology for a high
■
Built-in IC-card reader
operational system reliability: breakdown or replacement of a
■
Key-press sign-in
congress unit and connection failure of a cable will not
■
■
■
Based on TAIDEN originated MCA-STREAM digital audio
Set any delegate unit to be VIP unit
™ Up to 32 units can be set as VIP in one system via
processing and transmitting technologies
■
Automatic video tracking implementation when cooperating
with cameras, video switcher unit; preset positions on PC
influence other congress units in the system
application software
Audio signals processed by high performance DSP: sound
quality approaching CD quality
5.47
HCS-4100/50 Series Digital Congress System
™ VIP unit can be activated as long as the total of active
microphones is not beyond 6 (incl. chairman/delegate/VIP
unit)
Controls and Indicators
■
Built-in channel selector consists of up/down channel select
buttons and 2-digit channel indicator display
■
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
■
Headphone volume up and down
■
Five voting keys with indicators
■
Microphone On/Off button with indicator
Interconnections
■
Socket for pluggable microphone
■
Ø 3.5 mm stereo headphone jack
■
1.5 m cable with 6P-DIN plug
■
0.6 m cable with 6P-DIN socket
Technical Specifications
Electrical
Max. consumption
Headphone connection
Frequency response
1.8 W
30 Hz to 20 kHz
>16 Ohm
Earphone load impedance
Earphone output
Recommended microphone type
Transducer
10 mW
Electret-condenser
Uni-directional
Polar pattern
5 VDC
Operating voltage
-46 dBV/Pa
Sensitivity
50 Hz to 20 kHz
Frequency response
2 kOhm
Input impedance
> 20 dB (1 kHz)
Directivity 0°/180°
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Maximum sound pressure level
Interface data
Ø 3.5 mm stereo jack for headphone
Connector
Mechanical
Mounting
Flush-mounting
Dimensions (h x w x d) (w/o stem mic.)
57 x 220 x 100 mm
0.72 kg
Weight (incl. stem microphone)
Charcoal gray
Color
410 mm (standard version),
Stem length
240 mm, 330 mm, 470 mm
Ordering Information
HCS-4360DE/50
Fully Digital Congress System Delegate Unit
(flush-mounting, 5 voting keys, IC-Card, 64
CHs, cover, charcoal gray)
5.48
HCS-4100/50 Series Digital Congress System
HCS-4361DE/50
Discussion Unit with Voting
■
Stem microphone can be unplugged during adjournment, easy
to maintain
■
■
Mini-microphone, with foam windshield
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
Excellent immunity to RF interference from mobile phones and
comparable devices
■
■
Microphone On/Off button, 5 voting keys
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
■
Facilities in stand-alone operation:
™ Set the number of delegates permitted to speak at the same
time
™ Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT
x "OPEN"
mode,
microphone
On/Off
button
with
request-to-speak registration (AUTO)
x "OVERRIDE" mode, microphone On/Off button control
with override of the active microphones (FIFO)
x "VOICE" mode, acoustic active sensitivity and automatic
switch-off time adjustable continuously, built-in “flash-on”
Features
■
Flush-mounting, stylish and ergonomic design
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
5 voting keys
■
“Closed Loop - Daisy Chain” connection topology
■
Supporting 48 kHz audio sampling rate
■
Excellent immunity to RF interference from mobile phones
■
Gain and EQ (5 band) of each microphone adjustable
technology, immediate microphone activation on speaking
x “APPLY” mode, delegate applies to speak by pressing
microphone On/Off button, delegate only speaks when
operator or chairman approved his application
x "PTT" mode, press microphone On/Off button to talk
™ Voting function (Yes/No/Abstain)
■
™ For/Against
separately
■
Supporting "PnP" (plug and play)
■
Equipped with cover to protect the unit from damage
Multiform voting in combination with the corresponding
software modules:
™ Parliamentary: YES/NO/ABSTAIN
™ Questionnaire: 1/2/3/4/5
™ Audience response: --/-/0/+/++
during the adjournment
™ Parliamentary (NPPV): YES/NO/ABSTAIN/NPPV
™ Appraisal:
ƒ Satisfied (Four keys voting:
The multi-functional delegate unit meets the demands of most
perfectly satisfied/satisfied/basically satisfied/unsatisfied)
conferences. It provides facilities for speaking, listening and voting.
(Three keys voting:
It has excellent immunity to RF interference from mobile phones.
satisfied/basically satisfied/unsatisfied)
The loudspeaker offers superior acoustics with minimal feedback
(Two keys voting: satisfied/unsatisfied)
for enhanced intelligibility.
ƒ Qualified (four/three/two keys voting)
ƒ Competent (four/three/two keys voting)
■
Functions
■
■
■
■
"Closed Loop - Daisy Chain" connection topology for a high
application software
™ VIP unit can be activated as long as the total of active
influence other congress units in the system
■
Set any delegate unit to be VIP unit
™ Up to 32 units can be set as VIP in one system via
congress unit and connection failure of a cable will not
■
Automatic video tracking implementation when cooperating
with cameras, video switcher unit; preset positions on PC
Compliant to IEC 60914
operational system reliability: breakdown or replacement of a
■
Key-press sign-in
Based on TAIDEN originated MCA-STREAM digital audio
microphones is not beyond 6 (incl. chairman/delegate/VIP
processing and transmitting technologies
unit)
Audio signals processed by high performance DSP: sound
quality approaching CD quality
Controls and Indicators
Gain and EQ (5 band) of each microphone adjustable
■
separately, fitting the individual orator’s voice to achieve perfect
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
speech pickup any time
■
Headphone volume up and down
■
Supporting 48 kHz audio sampling rate
■
Five voting keys with indicators
■
Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch)
■
Microphone On/Off button with indicator
to cut low frequency elements from the audio when needed
■
Automatic recovery facility, supporting "PnP" (plug and play)
5.49
HCS-4100/50 Series Digital Congress System
Interconnections
■
Socket for pluggable microphone
■
Ø 3.5 mm stereo headphone jack
■
1.5 m cable with 6P-DIN plug
■
0.6 m cable with 6P-DIN socket
Technical Specifications
Electrical
Max. consumption
Headphone connection
Frequency response
1.8 W
30 Hz to 20 kHz
>16 Ohm
Earphone load impedance
10 mW
Earphone output
Recommended microphone type
Transducer
Electret-condenser
Uni-directional
Polar pattern
5 VDC
Operating voltage
-46 dBV/Pa
Sensitivity
50 Hz to 20 kHz
Frequency response
2 kOhm
Input impedance
> 20 dB (1 kHz)
Directivity 0°/180°
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Maximum sound pressure level
Interface data
Ø 3.5 mm stereo jack for headphone
Connector
Mechanical
Mounting
Flush-mounting
57 x 220 x 100 mm
Dimensions (h x w x d) (w/o stem mic.)
0.72 kg
Weight (incl. stem microphone)
Charcoal gray
Color
410 mm (standard version),
Stem length
240 mm, 330 mm, 470 mm
Ordering Information
HCS-4361DE/50
Fully Digital Congress System Delegate Unit
(flush-mounting,
5
voting
keys,
cover,
charcoal gray)
5.50
HCS-4100/50 Series Digital Congress System
HCS-4362D/50 Discussion Unit with
Channel Selection
■
Gain and EQ (5 band) of each microphone adjustable
separately, fitting the individual orator’s voice to achieve perfect
speech pickup any time
■
Transmitting up to 64 CHs high quality digital audio signals on
a dedicated 6-pin cable (general Cat.5 cable substitutable)
■
Supporting 48 kHz audio sampling rate, all 64 channels with a
frequency response of 30 Hz to 20 kHz
■
Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch)
to cut low frequency elements from the audio when needed
■
■
Automatic recovery facility, supporting "PnP" (plug and play)
Stem microphone can be unplugged during adjournment, easy
to maintain
■
■
Mini-microphone, with foam windshield
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
Excellent immunity to RF interference from mobile phones and
comparable devices
■
■
Flush-mounting, stylish and ergonomic design
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
“Closed Loop - Daisy Chain” connection topology
■
Transmitting up to 64 CHs high quality digital audio
■
Supporting 48 kHz audio sampling rate, all 64 channels
■
time
™ Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT
x "OPEN"
Gain and EQ (5 band) of each microphone adjustable
Supporting "PnP" (plug and play)
■
Equipped with cover to protect the unit from damage
button
with
with override of the active microphones (FIFO)
switch-off time adjustable continuously, built-in “flash-on”
technology, immediate microphone activation on speaking
x “APPLY” mode, delegate applies to speak by pressing
microphone On/Off button, delegate only speaks when
separately
■
On/Off
x "VOICE" mode, acoustic active sensitivity and automatic
select buttons and 2-digit channel indicator display
■
microphone
x "OVERRIDE" mode, microphone On/Off button control
Built-in channel selector consists of up/down channel
Excellent immunity to RF interference from mobile phones
mode,
request-to-speak registration (AUTO)
with a frequency response of 30 Hz to 20 kHz
■
Facilities in stand-alone operation:
™ Set the number of delegates permitted to speak at the same
signals on a dedicated 6-pin cable
■
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
Features
■
Microphone On/Off button
operator or chairman approved his application
x "PTT" mode, press microphone On/Off button to talk
™ Simultaneous interpretation
during the adjournment
■
Automatic video tracking implementation when cooperating
with cameras, video switcher unit; preset positions on PC
■
The multi-functional delegate unit meets the demands of even the
Set any delegate unit to be VIP unit
™ Up to 32 units can be set as VIP in one system via
largest conferences. It provides facilities for speaking, listening and
application software
selecting language channels. It has excellent immunity to RF
™ VIP unit can be activated as long as the total of active
interference from mobile phones. It features a channel selector,
microphones is not beyond 6 (incl. chairman/delegate/VIP
channel selection is automatically limited to the number of language
unit)
channels available. The loudspeaker offers superior acoustics with
Controls and Indicators
minimal feedback, so increasing intelligibility.
■
Built-in channel selector consists of up/down channel select
buttons and 2-digit channel indicator display
Functions
■
■
■
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
Compliant to IEC 60914
"Closed Loop - Daisy Chain" connection topology for a high
■
Headphone volume up and down
operational system reliability: breakdown or replacement of a
■
Microphone On/Off button with indicator
congress unit and connection failure of a cable will not
■
■
influence other congress units in the system
Interconnections
Based on TAIDEN originated MCA-STREAM digital audio
■
Socket for pluggable microphone
processing and transmitting technologies
■
Ø 3.5 mm stereo headphone jack
Audio signals processed by high performance DSP: sound
■
1.5 m cable with 6P-DIN plug
quality approaching CD quality
■
0.6 m cable with 6P-DIN socket
5.51
HCS-4100/50 Series Digital Congress System
Technical Specifications
Electrical
Max. consumption
Headphone connection
Frequency response
Earphone load impedance
Earphone output
Recommended microphone type
Transducer
1.8 W
30 Hz to 20 kHz
>16 Ohm
10 mW
Electret-condenser
Uni-directional
Polar pattern
5 VDC
Operating voltage
-46 dBV/Pa
Sensitivity
50 Hz to 20 kHz
Frequency response
2 kOhm
Input impedance
> 20 dB (1 kHz)
Directivity 0°/180°
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Maximum sound pressure level
Interface data
Ø 3.5 mm stereo jack for headphone
Connector
Mechanical
Mounting
Flush-mounting
Dimensions (h x w x d) (w/o stem mic.)
Weight (incl. stem microphone)
57 x 220 x 100 mm
0.72 kg
Charcoal gray
Color
410 mm (standard version),
Stem length
240 mm, 330 mm, 470 mm
Ordering Information
HCS-4362D/50
Fully Digital Congress System Delegate Unit
(flush-mounting, 64 CHs, cover, charcoal
gray)
5.52
HCS-4100/50 Series Digital Congress System
HCS-4363D/50 Discussion Unit
■
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
Excellent immunity to RF interference from mobile phones and
comparable devices
■
■
Microphone On/Off button
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
■
Facilities in stand-alone operation:
™ Set the number of delegates permitted to speak at the same
time
™ Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT
x "OPEN"
mode,
microphone
On/Off
button
with
request-to-speak registration (AUTO)
x "OVERRIDE" mode, microphone On/Off button control
with override of the active microphones (FIFO)
x "VOICE" mode, acoustic active sensitivity and automatic
switch-off time adjustable continuously, built-in “flash-on”
technology, immediate microphone activation on speaking
x “APPLY” mode, delegate applies to speak by pressing
Features
■
Flush-mounting, stylish and ergonomic design
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
“Closed Loop - Daisy Chain” connection topology
■
Supporting 48 kHz audio sampling rate
■
Excellent immunity to RF interference from mobile phones
■
Gain and EQ (5 band) of each microphone adjustable
microphone On/Off button, delegate only speaks when
operator or chairman approved his application
x "PTT" mode, press microphone On/Off button to talk
■
■
Supporting "PnP" (plug and play)
■
Equipped with cover to protect the unit from damage
Set any delegate unit to be VIP unit
™ Up to 32 units can be set as VIP in one system via
application software
separately
■
Automatic video tracking implementation when cooperating
with cameras, video switcher unit; preset positions on PC
™ VIP unit can be activated as long as the total of active
microphones is not beyond 6 (incl. chairman/delegate/VIP
unit)
during the adjournment
Controls and Indicators
■
The delegate unit meets the basic demands of conferences. It
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
provides facilities for speaking and listening. It has excellent
immunity to RF interference from mobile phones. The loudspeaker
offers superior acoustics with minimal feedback for enhanced
intelligibility.
■
Headphone volume up and down
■
Microphone On/Off button with indicator
Interconnections
■
Socket for pluggable microphone
Functions
■
Ø 3.5 mm stereo headphone jack
■
Compliant to IEC 60914
■
1.5 m cable with 6P-DIN plug
■
"Closed Loop - Daisy Chain" connection topology for a high
■
0.6 m cable with 6P-DIN socket
operational system reliability: breakdown or replacement of a
congress unit and connection failure of a cable will not
Technical Specifications
Electrical
influence other congress units in the system
■
Based on TAIDEN originated MCA-STREAM digital audio
Max. consumption
Headphone connection
Frequency response
processing and transmitting technologies
■
Audio signals processed by high performance DSP: sound
quality approaching CD quality
■
Earphone load impedance
Gain and EQ (5 band) of each microphone adjustable
Earphone output
Recommended microphone type
Transducer
separately, fitting the individual orator’s voice to achieve perfect
speech pickup any time
■
Supporting 48 kHz audio sampling rate
■
Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch)
Polar pattern
Operating voltage
to cut low frequency elements from the audio when needed
■
Automatic recovery facility, supporting "PnP" (plug and play)
■
Stem microphone can be unplugged during adjournment, easy
Sensitivity
Frequency response
Input impedance
to maintain
■
Directivity 0°/180°
Mini-microphone, with foam windshield
Equivalent noise
5.53
1.8 W
30 Hz to 20 kHz
>16 Ohm
10 mW
Electret-condenser
Uni-directional
5 VDC
-46 dBV/Pa
50 Hz to 20 kHz
2 kOhm
> 20 dB (1 kHz)
20 dBA (SPL)
HCS-4100/50 Series Digital Congress System
125 dB (THD<3%)
Maximum sound pressure level
Interface data
Ø 3.5 mm stereo jack for headphone
Connector
Mechanical
Mounting
Flush-mounting
Dimensions (h x w x d) (w/o stem mic.)
Weight (incl. stem microphone)
57 x 220 x 100 mm
0.72 kg
Charcoal gray
Color
410 mm (standard version),
Stem length
240 mm, 330 mm, 470 mm
Ordering Information
HCS-4363D/50
Fully Digital Congress System Delegate Unit
(flush-mounting, cover, charcoal gray)
5.54