1. home and garden
2. home furnishings
3. lamps and lighting

lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
Client
Project name
Order#Type
Qty
FEATURES AND BENEFITS
Physical :
• Low copper content high pressure die-cast aluminum housing
• Steel formed yoke (standard yoke included)
• Stainless steel hardware
• Silicone sealing devices
• Clear tempered glass
• Dual chamber design for heat management and ease of maintenance
• Electro-statically applied polyester powder coat finish
• 16.33 kg / 36 lbs
• EPA: Front = 2.75 sq. ft./ 0.26 sq. m. Side = 1.17 sq. ft./ 0.12 sq. m.
• IP66
• IK09 rated
• Corrosion-resistant coating for hostile environments*
• Meets 3G ANSI C136.31 Vibration standard for bridge applications
Performance :
• • • • • • • • • • Minimum 1fc (10.7 lux) @ 716 feet (218m) distance (4000K, 6° optic, RO version)
Minimum 1fc (10.7 lux) @ 810 feet (246m) distance (4000K, 6° optic, HO version)
8,094 delivered lumens and 513,993 candelas at nadir (4000K, 6° optic, RO version)
10,447 delivered lumens and 656,461 candelas at nadir (4000K, 6° optic, HO version)
CRI value: 80+
6°, 10°, 20°, 40° or 60° optics available
Lumen maintenance 120,000 hrs [L70 @ 25°C]
Resolution per board or per fixture (see page 6)
Lumen measurements comply with LM - 79 - 08 standard
Operating temperatures: -25° C to 50° C [-13F to 122F]
IK09
Electrical :
• • • • • Line voltage luminaire for 100 to 277V
Power and data in 1 cable, 3ft/1 m cord (#16-5)
Regular Output version: 140 watts
High Output version: 205 watts
Dimming options: 0-10 volt, DMX, DALI, Lumentalk, or Lutron® EcoSystem® enabled
5 3"
4
[146mm]
TOP VIEW
0°
1
17 2 "
[445mm]
68°
board #3
board #2board #1
17 1 "
4
[438mm]
1
23 "
8
[587mm]
90°
160°
FRONT VIEW
Standard Yoke Mounting
Adjustable Pivot Limits
(Adjustable in 6 degree increments)
SIDE VIEW
Standard Yoke (as shown, included)
* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure!
1/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
MOUNTING OPTION
5 3"
4
[146mm]
17 1 "
2
[445mm]
0°
70°
18 3 "
4
[476mm]
110°
SY
Short Yoke Mounting
Short Yoke mounting
adjustable pivot limits
(Adjustable in 6 degree increments)
3"
[76mm]
1
"
2
[13mm]
5
"
8
[16mm]
Standard and Short Yoke mounting
holes Pattern
OPTICAL OPTIONS
*Factory installed
LSLH
Linear Spread Lens
Horizontal distribution
(not adjustable on site)
LSLV
Linear Spread Lens
Vertical distribution
(not adjustable on site)
2/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
Factory installed, available for 6° to 40° optics.
See Optical Accessories for field adjustable spread lens.
*See photometric section for optical performance data
with the spread lens.
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
ACCESSORIES
Order separately
Mounting Accessories
PM4-1, PM4.5-1, PM5-1
Round Pole Mounting accessory
single fixture
28 5 "
16
[719mm]
PM4-2, PM4.5-2, PM5-2
Round Pole Mounting accessory
twin fixtures
5 3 "
16
[132mm]
7 5 "
16
[185mm]
23"
16
[55mm]
When PM4-2, PM4.5-2 or PM5-2 are specified,
one bracket assembly is supplied per 2 fixtures unless
otherwise specified.
PM4 Round Pole Mounting Accessory Shown
*Consult factory for square pole section
5 7"
8
[149mm]
TN2
Tenon adapter
to fit on 2 3/8” O.D. tenon
4"
[102mm]
21
2"
[64mm]
5 7"
8
[149mm]
TN4
Tenon adapter
to fit on 4” O.D. tenon
4"
[102mm]
3/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
41"
8
[105mm]
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
ACCESSORIES - continued
Order separately
Optical Accessories:
LBX-SN-___-BK Snoot accessory. Please specify desired exterior finish :
*Interior surface SI - Silver SandText
painted black. BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-SNW-___-BK Snoot Wide accessory. Please specify desired exterior finish :
*Interior surface SI - Silver SandText
painted black. BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-VS-___-BK Visor accessory. Please specify desired exterior finish :
*Interior surface SI - Silver SandText
painted black. BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-WG-___ Wire Guard accessory. Please specify desired exterior finish :
SI - Silver SandText
BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-LSLA-___ Linear Spread Lens Adjustable accessory. Please specify desired exterior finish :
SI - Silver SandText
BKM - Matte black
WH - White
CC - Custom, please specify RAL color
Accessory combinations:
+
Snoot Snoot Wide Visor Wire Guard
Snoot
NO
NO
NO
YES
Visor
NO
NO
NO
YES
Linear Spread
Lens Adjustable
YES
YES
YES
NO
Accessory combinations must be ordered together on a single line.
Ex: A Snoot + Wire Guard combination order code is LBX-SNWG-BK-BK.
4/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
ACCESSORIES - continued
Order separately
Control Systems:
LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.
It must be specifi ed on all DMX applications.
Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controller
with a push button rotary dial and live feedback.
Control Boxes:
CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.
Ethernet enabled option.
Refer to CBX specifi cation sheet for details.
5/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
RESOLUTION DETAILS
APPLICABLE FOR DMX DIMMING OPTION ONLY
DMX 1BD - Resolution per board: each board is addressed independently
(recommended for most installations).
DMX ADDRESSES:
board #3
7,8,9
board #2
4,5,6
board #1 (master)
1,2,3
LBX
DMX 1FX - Resolution per fixture: each fixture is addressed independently
DMX ADDRESSES:
1,2,3
LBX
*Warning: resolution is a factory setting and cannot be changed in the field.
6/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAMS
Non-Dimming or Lumentalk Dimming Version
#16-3 Power
cable
(by others)
100-277V
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
To fixture
JBOX
From
previous
fixture
To next
fixture
Line black
Ground green
Neutral white
Wire-nuts
Dimming Version (0-10V)
Junction box
(by others)
10% minimum dimming value
#16-5 Power
& data cable
(by others)
100-277V
JBOX
From
dimmer
Dimmer
Data+ red
Data- orange
To
fixture
100-277V
Maximum run length by 15A circuit @ 120V:
8 LBX RO (16AWG cable),
6 LBX HO (16AWG cable),
10’ on center spacing
100’ max cable length.
Line black
Ground green
Neutral white
To next
fixture
Wire-nuts
0-10V mA Ratings:
Passive Dimmer (Current Sink): 3mA per fixture
Active Dimmer (Current Source): 0.5mA per fixture
Junction box
(by others)
7/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAMS - continued
Dimming Version (DALI)
1% minimum dimming value
#16-5 Power
& data cable
(by others)
100-277V
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
JBOX
From
DALI Controller
Typical
DALI Controller
Data+ red
Data- orange
To
fixture
100-277V
Line black
Ground green
Neutral white
Maximum run length by 15A circuit @ 120V:
8 LBX RO (16AWG cable),
6 LBX HO (16AWG cable),
10’ on center spacing
100’ max cable length.
To next
fixture
Junction box
(by others)
Dimming Version (EcoSystem®)
1% minimum dimming value
#16-5 Power
& data cable
(by others)
100-277V
JBOX
From
Lutron EcoSystem Controller
Open
Preset
Close
1
2
3
4
Off
LUTRON
Grafik Eye® shown
Data+ red
Data- orange
To
fixture
100-277V
Line black
Ground green
Neutral white
Maximum run length by 15A circuit @ 120V:
8 LBX RO (16AWG cable),
6 LBX HO (16AWG cable),
10’ on center spacing
100’ max cable length.
To next
fixture
Junction box
(by others)
8/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAMS - continued
Star Layout (DMX Dimming)
1% minimum dimming value
#16-5 Power &
data cable
(by others)
JBOX
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
CBX-ST
100-277V
Lumentouch 2.0
Data
input
lumenterminator
(use at the end
of each run only)
DMX- orange
DMX+ red
From
fixture or
CBX
100-240V
To
Fixture
8 LBX RO (16 AWG cable) max. per CBX-ST,
6 LBX HO (16 AWG cable) max. per CBX-ST,
10’ on center spacing.
6 outputs max. per CBX-ST.
100‘ max. total cable length per CBX-ST.
(based on a 15A @ 120V)
Line black
Ground green
Neutral white
Wire-nuts
Junction box
(by others)
DMX terminator is required at the end
of each run to maintain data integrity.
(2x) DMX lumenterminator included per CBX-DS
(6x) DMX lumenterminator included per CBX-ST
See installation instructions for details.
Daisy Chain Layout (DMX Dimming)
1% minimum dimming value
JBOX
CBX-DS
#16-5 Power &
data cable
(by others)
100-277V
lumenterminator
(use at the end
of each run only)
Lumentouch 2.0
Data
input
100-240V
DMX- orange
DMX+ red
From
fixture or
CBX
To
Fixture
Line black
Ground green
Neutral white
Wire-nuts
Junction box
(by others)
9/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
8 LBX RO (16 AWG cable) max. per CBX-DS,
6 LBX HO (16 AWG cable) max. per CBX-DS,
10’ on center spacing.
2 outputs max. per CBX-DS.
100‘ max. total cable length per CBX-DS.
(based on a 15A @ 120V)
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
XLARGE
WHITE & STATIC COLORS
HOW TO ORDER
LBX Select:
Select:
1
Select:
2
Select:
Select:
Board 1/ Board 2/ Board 3
3
4
1
Select:
5
Select:
6
Select:
7
8
5
Housing:
Optical Option:
LBX RO - Lumenbeam XLarge, Regular Output, 140W
LBX HO - Lumenbeam™ XLarge, High Output, 205W
LSLH - Linear Spread Lens Horizontal distribution
LSLV - Linear Spread Lens Vertical distribution
™
2
*Factory installed, available for 6° to 40° optics. See
Optical Accessories for field adjustable spread lens.
Voltage:
100 - 100 volts
120 - 120 volts
208 - 208 volts
220 - 220 volts
240 - 240 volts
277 - 277 volts
6
Finish:
SI - Silver SandText
BK - Black SandText
WH - White
CC - Custom (please specify RAL color)
3
Colors and Color temperatures:
27K - 2700K
30K - 3000K
35K - 3500K
40K - 4000K
57K - 5700K
RD - Red
GR - Green
BL - Blue
7
Control:
NO - No Dimming
LT - Lumentalk (1% minimum dimming value)
DIM - 0-10V Dimming option
(10% minimum dimming value)
(Current Sink: 3mA/fixture) (Current Source: 0.5mA fixture)
DMX 1BD - DMX Dimming option, resolution per board
(9 addresses per fixture)
(1% minimum dimming value)
DMX 1FX - DMX Dimming option, resolution per fixture
(3 addresses per fixture)
(1% minimum dimming value)
DALI - DALI Dimming option
(1% minimum dimming value)
ES - Lutron® EcoSystem® Enabled Dimming
(1% minimum dimming value)
4
Optic (Please specify for each board):
VN - Very Narrow 6°
NS - Narrow Spot 10°
NF - Narrow Flood 20°
8
FL - Flood 40°
Option:
SY - Short Yoke
SY-3GV - Reinforced Short Yoke to meet 3G ANSI
C136.31 Vibration Rating standard
CRC - Corrosion-resistant coating for hostile environments
WFL - Wide Flood 60°
(cannot be combined with other
optics)
10/10
© Copyright Lumenpulse 2015
2015.03.03
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
EM - R30
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.