1. No category

SCHWARZBECK MESS - ELEKTRONIK
An der Klinge 29 D-69250 Schönau Tel.: (+49) 6228/1001
Fax.: (+49) 6228/1003 E-mail: office@schwarzbeck.de
Used equipment or special offers (2015-03-12). Please allow us a delivery time of
1-4 weeks to upgrade and calibrate used equipment before shipment.
1)
1ea R&S HL046
Antenna
Dual log-periodic antenna for EMS
measurements.
Frequency range: 80 MHz-1300 MHz
Connector: N-female
R&S Material
No.
4040.8708.02 The HL046 is mounted on a white
trolley. The height of the antenna is
adjustable between approx. 1 m1.75 m.
Will be delivered with individual
VSWR plot.
€
2.980,00
2)
1ea
3)
1ea HFRA
9150
CDN 801AF8
Coupling-Decoupling-Network 801-6
IEC 1000-4-6
HF - Input 0,15 ... 230 MHz
HF-Power-Dissipation
4 W max.(100 Ω)
incl. 50 Ω BNC termination.
Unit will be delivered with individual
ISO 17025 calibration certificate.
€
480,00
H-Field Transmit Loop VLF/HF
100 W
Dimensions: 0.6 m x 0.6 m,
Mounting Support 3/8” camera thread,
two BNC female Connectors,
ext. termination 50 Ω
Antenna will be delivered with an
individual calibration report.
€
880,00
Datasheet:
http://www.schwarzbeck.de/Datenblatt/k5150.pdf
picture coming soon
4)
1ea
JASO D
001-94
This 56 mikrohenry LISN is a prototype
which never became a list product due
to no demand. It is built according to
JASO D 001-94, has a frequency
range of 10-200 kHz and a max.
current of 50 A at max. 220 V 50 Hz
AC. Unit will be delivered with an
individual calibration report but without
further documentation except for a
circuitry plan.
€
600,00
6)
1ea
Sucoflex
104
Coaxial cable Huber und Suhner
Sucoflex 104, length 2 m, both sides
PC3.5 plug, specified and calibrated
up to 26.5 GHz, produced in 2004 but
still in original unopened packaging
with original calibration data. Several
units available.
€
150,00
7)
1ea
Weinschel
Aeroflex
Model 4710-34
10 dB attenuator 18 GHz 50 Watt.
Datasheet:
€
190,00
http://www.aeroflex.com/ams/weinschel/pdfiles/wmod47.pdf
Never used in original package, with
new individual calibration certificate.
8)
1ea
EMCO
1060C
EMCO positioning controller 1085. On
the back we also read model 1060C.
The device can control turntable and
mast via front panel operation or via
GPIB. Powers up but as we have no
possibility to test we offer a right to
return within 30 days after the
purchase.
€
280,00
10)
1ea
Rohde &
Schwarz
ENY 22
with
adapter set
R&S ENY22 double 2 wire ISN for
CISPR 22 (1997) to measure the
common mode noise on unshielded
twisted pairs from 150 kHz to 30 MHz,
also for immunity testing acc. CISPR
24 (1997) including a case, manual,
2W100_BNC, Type 6 AE Port, Type 6
80 dB, Type 6 60 dB, Type 6 50 dB,
Type 5 AE port, Type 5 80 dB, Type 5
60 dB, Type 5 50 dB, 2W_150. The
type 5 adapters have an RJ45 jack, the
type 6 Adapters are for free wiring. Unit
in working condition.
€
980,00
11)
1ea
Rohde &
Schwarz
ENY 41
with B1
adapter set
R&S ENY41 4 wire ISN for CISPR 22
(1997) to measure the common mode
noise on unshielded twisted pairs from
150 kHz to 30 MHz, also for immunity
testing acc. CISPR 24 (1997) including
a case, manual, 4W_100_BNC, Type 4
AE Port, Type 4 80 dB, Type 4 60 dB,
Type 4 50 dB, Type 3 AE port, Type 3
80 dB, Type 3 60 dB, Type 3 50 dB,
Type 6 AE Port, Type 6 80 dB, Type 6
60 dB, Type 6 50 dB, Type 1 AE Port,
Type 1 80 dB, Type 1 60 dB, Type 1
50 dB, Type 2 AE Port, Type 2 80 dB,
Type 2 60 dB, Type 2 50 dB, 4W_150.
The type 5 adapters have an RJ45
jack, the type 6 Adapters are for free
wiring. Unit in working condition.
€
1.280,00
12)
1ea
R&S HL023 Rohde und Schwarz Logarithmicperiodioc broadband antenna 80-1300
MHz, ind. cal. data at extra cost!
€
790,00
13)
1ea
Weinschel
Aeroflex
Model
1439-3
€
220,00
Weinschel Aeroflex 50 Ohm
termination / dummy load 150 Watt
with N-female connector, DC to 2.5
GHz, good cosmetical condition, fully
working with individual VSWR
calibration certificate.
14)
1ea
IGU 2912
Calibration Pulse Generator for
EMI-EMC Applications
€
1.250,00
EMI receiver 25 – 1000 MHz in 6
bands, QP-detector, unit will be
calibrated before delivery. Signs of
wear.
€
980,00
EMI-Receiver acc. CISPR 16-1, 9
kHz – 30 MHz, 3 Detectors:
Quasipeak, Peak, Average,
Attenuator with 1 dB steps, Protected
Input, Automatic Calibration w. built-in
Pulse Generator. No IEEE 488
Interface! The unit will be refurbished
and calibrated before delivery. This
unit has an extra battery pack.
€
2.280,00
Pulse Repetition Frequency: 1-200(209)Hz
Pulse Shape: almost rectangular
Pulse duration: 0.2 ns,
Pulse Polarity: positive/negative (switchable)
Pulse Level (CISPR weighting QP):0-60 dB in
1dB steps.
Max. Output Voltage acr. 50 W: 80V - 110 V
Unit will be calibrated before delivery.
picture coming soon
15)
1ea
VUME
1520 A
16)
1ea FMLK 1518
without
GPIB
Interface
17)
1ea
FMLK 1518
with GPIBInterface,
and
Messbase
Software.
EMI-Receiver acc. CISPR 16-1, 9 kHz
– 30 MHz, 3 Detectors: Quasipeak,
Peak, Average, Attenuator with 1 dB
steps, Protected Input, Automatic
Calibration w. built-in Pulse Generator.
The unit will be refurbished and
calibrated before delivery. This unit is
fully equipped with the Messbase
software and GPIB interface.
Additionally required: PC or Laptop,
GPIB card made by NI or INES.
€
4.680,00
18)
1ea VUMA 1521
without
GPIB
Interface
EMI-Receiver acc. CISPR 16-1, 25
MHz - 1 GHz, 3 Detectors:
Quasipeak, Peak, Average,
Attenuator with 1 dB steps, Protected
Input, Automatic Calibration w. built-in
Pulse Generator. No IEEE 488
Interface! The unit will be refurbished
and calibrated before delivery.
€
1.680,00
19)
1ea
FSME 1515 EMI receiver 85 kHz – 30 MHz, QPDetector, built in pulse generator. The
unit has minor cosmetic scratches and
will be delivered with a new calibration
certificate before delivery.
€
980,00
20)
1ea
PAZ 1550
€
280,00
Panoramic Adapter
(VLF/LF/HF/VHF/UHF) Provides an
enlarged window and combines the
advantages of the sensitive receivers
with sharp input selectivity and well
defined detectors for QP, Peak and
Average with the spectrum overview of
a panoramic receiver. Constant
bandwidth of 20 kHz, maximum
spectrum display of 2 MHz. Can be
combined with FMLK 1518 and VUMA
1521. It works with newer generation
receivers after a modification. Please
call us to find out if your designated
combination will work,
21)
1ea FMZB Loop antenna 9 kHz – 30 MHz, constant antenna €
1516 factor of 20 dB(1/m), mains operated. The unit
will be updated to the newest technical state of
the art before delivery. Slight optical signs of
wear.
1.580,00
22) Used & tested coaxial cables with straight N-connectors, all individually
calibrated with certificates.
Cable type
Length
S/N
Condition
Price [Euro]
1 = very good, like
new
2 = good
3 = signs of usage
1)
AK 9515 E
20 m
Will be
New
250,00
attached
2)
AK 9513
15 m
95865
New
170,00
3)
RG 223/U
6m
382426
2
30,00
with N and
BNC plugs
4)
RG 223/U
6m
382428
2
30,00
23)
1ea
LSME 1530 EMI receiver 10 – 150 kHz in 3 bands,
A
QP-detector, unit will be calibrated
before delivery.
€
880,00
24)
1ea
FCKL 1528
with GPIBInterface,
and
Messbase
Software.
€
7.880,00
EMI-Receiver acc. CISPR 16-1, 9 kHz
– 30 MHz, 3 Detectors: Quasipeak,
Peak, Average, Attenuator with 1 dB
steps, protected Input, automatic
calibration w. built-in pulse generator.
The unit was regularly serviced and
calibrated every 2-3 years. Will be
recalibrated before delivery. This unit
is fully equipped with the Messbase
software and GPIB interface.
Additionally required: Windows PC or
Laptop, Printer.
Datasheet: FCKL1528 Manual
25)
1ea
VSME
1510B
EMI receiver 30-300 MHz
Unit will be calibrated before delivery.
34)
1ea
CDN AF4-1 Schaffner MEB Berlin GmbH (formerly
Messelektronik Berlin, then Teseq,
today Ametek) Coupling-DecouplingNetwork CDN AF4-1 acc. IEC 610004-6
Unit will be delivered with individual
ISO 17025 calibration certificate for
the common mode impedance Z and
the voltage division factor k.
Irregular cosmetic paint issue on top.
€
980,00
€
480,00
35)
1ea
VHA 9103
long
element
Spare part for VHA 9103 or VHAP:
long telescopic element made of nickel
plated brass (today’s version: stainless
steel) 30 - 114 MHz, several units
available.
€
90,00
36)
1ea
VHA 9103
short
element
Spare part for VHA 9103 or VHAP:
short telescopic element made of
nickel plated brass (today’s version:
stainless steel) 114 - 300 MHz, several
units available.
€
80,00
37)
1ea
UHA 9105
Tuneable UHF – Half – Wave Dipole,
300 – 1000 MHz w. telescopic
elements, several units available.
€
680,00
38)
1ea
BBV 9718
with option
battery and
ALCS 224A
Broadband Coaxial Preamplifier typ.
33 dB, 1 - 18 GHz with fixture for
22 mm antenna tube, and N to SMA
cable, battery pack and charger. Will
be furnished with a new calibration
shortly before delivery. List price of all
items more than Euro 4.000,00
€
2.980,00
40)
1ea
ISO 7637-3
capacitive
coupling
clamp
Capacitive coupling clamp for
transients acc. to ISO 7637-3 or DC10614 B.5. similar to Teseq CDN 500
or Hilotest CDN2012 or Schwarzbeck
CCC 9224 or EM Test ACC. Will be
equipped with BNC or N connectors
before delivery according to your
preference.
€
680,00
41)
1ea
Haefely
IP4A
capacitive
clamp
Capacitive coupling clamp for
superposition of bursts on data lines
acc. to IEC/EN 61000-4-4
maximum cable size 40mm
minimum test cable length 1m
maximum EFT voltage 8kV
coupling plane mounted on 0.1m
insulation block, wooden box.
€
750,00
42)
1ea
EFT
BURST
ESD
capacitive
coupling
clamp
Unknown capacitive coupling clamp
probably for EFT / Burst. Do you know
this model? Please tell us the
manufacturer and model name! Thank
you!
€
t.b.d.
43)
1ea
EM Test
HFK
Capacitive coupling clamp for EFT
Burst acc. to IEC/EN 61000-4-4.
€
620,00