1. technology and computing
2. hardware

Table of Contents
Hardware is an integral component in any architectural glass installation
project. It must support the glass safely and structurally while adding an
attractive design element.
Joel Berman Glass Studios offers hardware components designed to work
in harmony with the company’s glass. Designed and made exclusively by Joel
Floor to Ceiling Mount
with Panel Grip - Straight
Berman Glass Studios, this hardware product line offers an elegant,
distinctive finish to any glass application.
Wall Mount with Spacer & Button
HARDWARE OVERVIEW
3–5
ASSEMBLY OPTION
6–13
ORDERING INFORMATION
14–20
Wall Mount with Panel Grip - Hook
Panel to Panel Wall Mount with
Button & Spacer
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
2
Guide to Choosing Hardware
Select diameter and connecting arm length.
Options: fixing plate can be oversized for
increased stability on drywall. You will need to
select your own fastener to suit the specific site
conditions. Fasteners are not included with
hardware.
First decide where your panels will be mounted:
1
FLOOR MOUNT
Straight Grip Assembly
What you will need:
FPS
FPT Fixing Plate (straight or tapered)
CA Connecting Arm
PGS Panel Grip - Straight
2
WALL MOUNT
Option A | Panel Grip - Straight
What you will need:
FPS
FPT Fixing Plate (straight or tapered)
CA Connecting Arm
PGS Panel Grip - Straight
Option B | Panel Grip - Hook
What you will need:
FPS
FPT
Fixing Plate (straight or tapered)
Connecting Arm
PGH Panel Grip - Hook
CA
Option C | Wall Spacer & Button
What you will need:
FPS FPT Fixing Plate (straight or tapered)
WSP Wall Spacer
BT Button
3
CEILING MOUNT
Panel Grip - Straight
What you will need:
FPS
FPT
Fixing Plate (straight or tapered)
Connecting Arm
PGS Panel Grip - Straight
CA
Note: Site-specific metal fabrication installations that
are designed and specified by out-of-house
designers/architects/contractors are not the
responsibility of JBGS. JBGS does not accept
responsibility for any performance problems
associated to these specific custom applications. The
onus is on the designer/architect/contractor to provide
a sound solution for their respective final clients.
If you have panels that overlap each other you will require Panel to Panel
Spacers between each overlapping panel. Choose panel to panel spacers
to customize the distance between your panels. You can combine this option
with the Wall Spacer & Button Wall Mount Assembly Option.
You also need to order Socket Set Screws, Nylon Washers and Nylon Bushings.
Every panel of glass with hardware running through will require 2 Washers,
1 nylon bushing & 1 socket set screw.
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Examples of Mounting Options
Floor to Ceiling Mount
Fixing Plate, Connecting Arm
& Panel Grip - Straight
Wall Mount
Fixing Plate, Connecting Arm
& Panel Grip - Hook
Wall Mount
Fixing Plate, Wall Spacer & Button
FPS
CA
FPS
WSP
BT
PGS
Wall Mount
Fixing Plate, Wall Spacer,
Panel to Panel Spacer & Button
FPS
CA
FPS
BT
WSP
PSP
PGH
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
4
Key to Hardware Parts
KE Y TO PARTS
Fixing Plate - Straight
FPS
Fixing Plate - Tapered
FPT
Connecting Arm
CA
Panel Grip - Straight
PGS
Panel Grip - Hook
PGH
BT
Button
Wall Spacer
WSP
Panel Spacer
PSP
Socket Set Screw
SS
Nylon Washer
NY
Nylon Bushing
NB
Fixing Plate - Straight
FPS
Fixing Plate - Tapered
FPT
Connecting Arm
CA
Panel Grip - Straight
PGS
Panel Grip - Hook
PGH
Button
BT
Wall Spacer
WSP
Panel Spacer
PSP
Socket Set Screw
SS
Nylon Washer
Nylon Bushing
NB
NY
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Floor & Wall Mounts
Machined from 303 grade, solid stainless steel
with brushed finish, these components
provide strength, durability and require little
maintenance.
Straight Grip & Connecting Arm
Floor, Ceiling or Wall Mount Assembly
KEY TO PARTS
FPS
CA
Fixing Plate - Straight
PGS
Panel Grip - Straight
Connecting Arm
FRONT VIEW
SIDE VIEW
Components can be interchanged
to create support systems for a wide range of
applications.
Applications
Divider Panels
Shelving & Displays
Signage
Appliqués
FLOOR /CEILING
MOUNTING HARDWARE BY OTHERS
Exploded Assembly Diagram
x
y
PGS
y
CA
y
FPS
MOUNTING HARDWARE BY OTHERS
PARTS TO ORDER FOR ABOVE CONFIGURATION (STOCK SIZES LISTED)
FPS FIXING PLATE
- STRAIGHT
Thickness (y)
0.25" (6mm)
Diameter
1.0" (25mm)
1.25" (31mm)
PGS PANEL GRIP
CA CONNECTING ARM
Diameter
1.0" (25mm)
1.25" (31mm)
- STRAIGHT
Diameter
1.0" (25mm)
1.25" (31mm)
Width (x)
0.375" (10mm) for 0.25" (6mm) Glass Thickness
0.52" (13mm) for 0.375" (10mm) Glass Thickness
0.63" (16mm) for 0.50" (12mm) Glass Thickness
Length (y)
0.5" (12mm)
1.0" (25mm)
1.5" (37mm)
2.0" (50mm)
2.5" (62mm)
3.0" (75mm)
3.5" (87mm)
4.0" (100mm)
Length (y)
1.5" (37mm)
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
6
Wall Mounts
Machined from 303 grade, solid stainless steel
with brushed finish, these components
provide strength, durability and require little
maintenance.
Hook Grip & Connecting Arm
Wall Mount Assembly
KEY TO PARTS
FPS
CA
Fixing Plate - Straight
Connecting Arm
PGH Panel Grip - Hook
SIDE VIEW
Components can be interchanged
to create support systems for a wide range of
applications.
BOTTOM VIEW
Applications
Divider Panels
Shelving & Displays
Signage
Appliqués
MOUNTING HARDWARE BY OTHERS
Exploded Assembly Diagram
x
y
y
y
3/4"
FPS
PGH
CA
PARTS TO ORDER FOR ABOVE CONFIGURATION (STOCK SIZES LISTED)
FPS FIXING PLATE - STRAIGHT
Diameter
1.0" (25mm)
1.25" (31mm)
CA
Thickness (y)
0.25" (6mm)
0.25" (6mm)
Diameter
1.0" (25mm)
1.25" (31mm)
1.50" (37mm)
PGH PANEL GRIP HOOK
Diameter
1.0" (25mm)
1.25" (31mm)
CONNECTING ARM
Width (x)
0.375" (10mm) for 0.25" (6mm) Glass Thickness
0.52" (13mm) for 0.375" (10mm) Glass Thickness
0.63" (16mm) for 0.50" (12mm) Glass Thickness
Length (y)
0.5" (12mm)
1.0" (25mm)
1.5" (37mm)
2.0" (50mm)
2.5" (62mm)
3.0" (75mm)
3.5" (87mm)
4.0" (100mm)
Length (y)
1.25" (31mm)
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Wall Mounts
Versatile connecting and spacing system
for glass panels, balustrades, signage and
appliqués. Can be used to connect panels
of glass or for mounting panels to a wall with
a standoff. Choose button/spacer diameter
and spacer length.
Wall Spacer & Button
Wall Mount Assembly
KEY TO PARTS
FPT Fixing Plate - Tapered
BT Button
WSP Wall Spacer
SS Socket Set Screw
NY Nylon Washer
NB Nylon Bushing
SIDE VIEW
Applications
Divider Panels
Balustrades
Signage
Appliqués
MOUNTING HARDWARE BY OTHERS
Custom hardware is also available.
Please email hardware@jbermanglass.com
or call US+Canada 1888 505 GLASS
Exploded Assembly Diagram
y
BT
SS
NY
NB
y
WSP
y
FPT
PARTS TO ORDER FOR ABOVE CONFIGURATION (STOCK SIZES LISTED)
FIXING PLATE - TAPERED
FPT
IT IS RECOMMENDED THAT A
BONDING SPRAY BE USED BETWEEN
BUTTON & SOCKET SET SCREW.
BT
Diameter
1.25" (31mm)
1.5" (37mm)
2.0" (50mm)
2.5" (62mm)
Thickness (y)
0.25" (6mm)
BUTTON
Diameter
1.0" (25mm)
1.25" (31mm)
Thickness (y)
0.25" (6mm)
WALL SPACER
WSP Diameter
1.0" (25mm)
1.25" (31mm)
1.5" (37mm)
Length (y)
1.0" (25mm)
1.5" (37mm)
2.0" (50mm)
2.5" (62mm)
3.0" (75mm)
3.5" (87mm)
4.0" (100mm)
1.5" (37mm)
Please reference SS , NY , and NB under section Socket Set Screw, Was
Washers & Bushing on page 10
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
8
Panel to Panel Wall Mounts
Versatile connecting and spacing system
for glass panels, balustrades, signage and
appliqués. Can be used to connect panels
of glass or for mounting panels to a wall with
a standoff. Choose button/spacer diameter
and spacer length.
Spacer & Button | Panel to Panel
KEY TO PARTS
SIDE VIEW
BT
Button
PSP
Panel Spacer
SS
Socket Set Screw
NY
Nylon Washer
NB
Nylon Bushing
Applications
Divider Panels
Balustrades
Signage
Appliqués
Custom hardware is also available.
Please email hardware@jbermanglass.com
or call US+Canada 1888 505 GLASS
Exploded Assembly Diagram
NY
y
y
BT
NB
NY
SS
PSP
BT
SS
NB
PSP
BT
PARTS TO ORDER FOR ABOVE CONFIGURATION (STOCK SIZES LISTED)
BT
BUTTON
Diameter
1.0" (25mm)
1.25" (31mm)
1.5" (37mm)
IT IS RECOMMENDED THAT A BONDING
SPRAY BE USED BETWEEN BUTTON &
SOCKET SET SCREW.
PSP
Thickness (y)
0.25" (6mm)
PANEL SPACER
Diameter
1.0" (25mm)
1.25" (31mm)
1.5" (37mm)
Length (y)
0.5" (12mm)
1.0" (25mm)
1.5" (37mm)
2.0" (50mm)
2.5" (62mm)
3.0" (75mm)
3.5" (87mm)
4.0" (100mm)
Please reference SS , NY , and NB under section Socket Set Screw, Washers & Bushing on page 10
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Floor, Ceiling & Wall Mounts
All wall mount spacer and button hardware, as
well as panel connectors, will require socket
set screws, nylon washers and bushings. Choose
quantity and sizes from table below.
Socket Set Screw, Washers & Bushing
KEY TO PARTS
SS
NY
NB
FPS
FPT
Socket Set Screw
Nylon Washer
Nylon Bushing
Fixing Plate - Straight
Fixing Plate - Tapered
SOCKET SET SCREW
Diameter
0.25" NC (6mm)
SS
NY
Custom hardware is also available.
Please email hardware@jbermanglass.com
or call US+Canada 1888 505 GLASS
Length
0.75" (19mm)
1.0" (25mm)
1.25" (31mm)
1.5" (37mm)
Use appropriate Socket Set Screw according to Glass Thickness
NYLON WASHERS 1/16" thick ( WHITE )
Diameter
0.5" (12mm)
0.75" (19mm)
1.0" (25mm)
1.5" (37mm)
GLASS THICKNESS
SOCKET SET SCREW
6mm glass
0.75" (19mm)
10mm glass
1.0" (25mm)
12mm glass
1.25" (31mm)
NB
NYLON BUSHING
Diameter
0.25" (6mm)
Front View
Side View
Front View
Side View
*Cut to length on site.
Fixing Plates | Straight or Tapered
OPTIONS: FIXING PLATE CAN BE OVERSIZED
FOR INCREASED STABILITY
ON DRYWALL. YOU WILL NEED TO
SELECT YOUR OWN FASTENER TO SUIT THE
SPECIFIC SITE CONDITIONS. FASTENERS ARE
NOT INCLUDED WITH HARDWARE. SEE
"INDEPENDENT INSTALL" FOR HARDWARE ON
PAGE 11
FOR MORE INFORMATION .
y
FPS FIXING PLATE STRAIGHT
Diameter
1.00" (25 mm)
1.25" (31 mm)
Length (y)
0.25" (6 mm)
0.25" (6 mm)
y
FPT FIXING PLATE TAPERED
Diameter
1.00" (25 mm)
1.25" (31 mm)
1.50" (37 mm)
Length (y)
0.25" (6 mm)
0.25" (6 mm)
0.25" (6 mm)
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
10
Hardware Assembly & Independant Install
Option 1 - Reference Only
ASSEMBLY SECTION | PLYWOOD
Option 2 - Reference Only
ASSEMBLY SECTION | CONCRETE
1/4" FLAT HEAD MACHINE SCREW AND (HILTI)
DROP-IN ANCHOR BY OTHERS
1/4" FLAT HEAD
SCREW BY OTHERS
Tapered fixing plate
by JBGS Part FPT
Tapered fixing plate
by JBGS Part FPT
Option 3 | Reference Only
ASSEMBLY SECTION | DRYWALL WITH BLOCKING
1/4" FLAT HEAD MACHINE SCREW
WASHER AND NUT BY OTHERS
Tapered fixing plate by JBGS Part
FPT
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Example of Wall Mount with Layered Panels
Each Glass Panel is 1/4" (6mm) thick
Panel Distances from Wall:
Panel 1 - 1.25"
Panel 2 - 2.25"
Panel 3 - 3.25"
What you will need for this mounting system (for reference only)
Fixing Plates - 10 x 1/4" Thick, 1.25" Diameter
Wall Spacers - 5 x 1" Length, 1.0" Diameter
Wall Spacers - 3 x 2" Length, 1.0" Diameter
Wall Spacers - 2 x 3" Length, 1.0" Diameter
Panel Spacers - 3 x 3/4" Length, 1.0" Diameter
Panel Spacers - 2 x 3/4" Length, 1.0" Diameter
Buttons - 10 x 1/4" Thick, 1.0" Diameter
Socket Set Screws - 15 x 3/4" Length, 1/4" Diameter
Nylon Bushings - 15
Nylon Washers - 30 (15 pairs) x 1.0" Diameter
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
12
Example of Wall Mount with Layered Panels
NY
Nylon Bushing
Nylon Washers
Fixing Plate
1/4"
1/16" thick
NB
1/4" Length
FPT
Wall Spacer
Panel Spacer
Button
2" Length
3/4" Length
1/4" Length
WSP
PSP
BT
Nylon Bushing
1/4"
NB
NY
Nylon Washers
1/16" thick
Fixing Plate
1/4" Length
FPT
Wall Spacer
Panel Spacer
Button
1" Length
3/4" Length
WSP
PSP
1/4" Length
BT
3/4"
1/4"
1"
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Ordering Floor & Wall Mount Hardware
Determine whether panel will be mounted at parallel to another surface. (i.e.: wall or another panel) or vertically from the
floor and ceiling. All standard hardware will hold glass up to 12mm (1/2") thick. For thicker panels, custom hardware will be
required. Please email hardware@jbermanglass.com or call 1 888 505 4527 for more information on custom hardware.
P
Choose diameter of FIXING PLATE. Use a wider diameter FIXING PLATE for softer surfaces such as drywall. You will need to select
your own fastener to suit the specific site conditions. Fasteners are not included with hardware, and mounting screws are
not supplied with FIXING PLATES. These can be obtained from your local hardware store.
Select appropriate spacer type, length, and diameter. Either a CONNECTING ARM or WALL SPACER depending on application. A
CONNECTING ARM is used with the Panel Grip series STRAIGHT GRIP and HOOK GRIP. Wall Spacers are used in conjunction with BUTTONS
and PANEL SPACERS.
Order appropriate PANEL GRIP (STRAIGHT/HOOK) or BUTTON to hold the panel in place.
Order appropriate SOCKET SET SCREW, NYLON WASHERS and NYLON BUSHINGS. NYLON BUSHINGS provided with all glass hardware.
R
S
Ordering Panel Connectors
Choose diameter of BUTTONS and PANEL SPACERS
Determine width of PANEL SPACERS
Select appropriate quantity and length of appropriate SOCKET SET SCREW (see chart on page 10).
Choose NYLONS WASHERS and NYLON BUSHINGS to match same diameter as selected for buttons and Panel spacers.
You will require 1 bushing and 2 washers for every connection where a socket set screw is used and hardware
runs through the panel of glass.
Please photocopy the order sheet from your brochure and submit your order by email to: hardware@jbermanglass.com
Include UPS or Fedex account information for shipping or Visa/Mastercard for payment. Call 1 888 505 GLASS to confirm receipt of
order and to check on delivery times. Stock items can usually be shipped within 7 days. Custom orders will vary.
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
14
Hardware Order Information Form Please photocopy this order form for continued use
In order for your experience with us to exceed your
Project Information
Project Name or Reference
Address
expectations, please fill out this form to the best of
----------------------------------------------------------------------------------
your ability.
Project Description
Quote Due Date
Estimated Hardware Budget
Your complete satisfaction is our primary goal. We
aim to have the highest quality products and services.
Date
Project Designer
Name
Company
Address
City
Province/State
Postal/Zip Code
Installation Due Date
Drawings (# of pages)
---------------------------------------------------------------------------------Please mark the appropriate installation
Balustrade panels
Ceiling panels
Cladding
Collage
Decorative panels
Divider walls
Door
Elevator cab
Light fixture
Outdoor application
Partition walls
Risers
Retail shelving
Rotunda
Screens
Sculpture
Shower doors
Sidelights
Signage
Skylights
Transaction top
Country
----------------------------------------------------------------------------------
Phone
JBGS Required Hardware
Fax
Email
Please email hardware@jbermanglass.com
Attention: Hardware Designer or forward
to the JBGS Representative for your area
(Access our website for specific contact information
jbermanglass.com)
Standard Hardware (Please include finished working drawing).
Custom Hardware (Please include design intent sketch or working drawing).
Site Specific Hardware (Please include design intent sketch or working drawing).
---------------------------------------------------------------------------------JBGS Design Requirements
Design Installation and provide CAD drawings
Note: Based on provided information, a quote will be issued for client approval
based on design services required up to $125/hour
Design Custom Hardware
Note: Based on provided information, a quote will be issued for client approval
based on design services required up to $125/hour
Design Site Specific Hardware
Note: Based on provided information, a quote will be issued for client approval
based on design services required up to $125/hour
No Design Time required.
---
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Hardware Order Form Please photocopy this order form for continued use
Bill product to
Ship to
Company Name
Company Name
Contact
Contact
Address
Address
City
State/Province
Country
Email
Tel (
Zip/Postal Code
)
Fax (
Payment Information
Visa
Expiry Date
Bill Shipping to Account #
UPS Account#
Part
State/Province
Country
Email
Zip/Postal Code
)
Fax (
)
Mastercard
Card Number
Quantity
City
Tel (
)
Check here if same as billing address
Order Number
/
/
/
Cardholder Signature
P.O.#
Zip/Postal Code
Description
Diameter
Please email this form to hardware@jbermanglass.com or call 1 888 505 4527 for information
Length/Height
Unit Cost
Extended Price
Sub Total
Tax 1
Tax 2
Freight*
TOTAL
All orders are shipped via Fedex 3 day service (where available) or UPS ground unless otherwise directed. *We will bill for freight unless Fedex or UPS account provided.
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
16
Joel Berman Glass Studios | Hardware Price (1 of 2)
Part | Description
Diameter
inches | mm
Length (y)
inches | mm
FPS Fixing plate - straight
1.00" (25 mm)
1.25" (31 mm)
FPT Fixing plate - tapered
Order Number
Unit Price
0.25" (6 mm)
0.25" (6 mm)
FP100/025
FP125/025
13.28
15.17
1.00" (25 mm)
1.25" (31 mm)
1.50" (37 mm)
0.25" (6 mm)
0.25" (6 mm)
0.25" (6 mm)
FPT100/025
FPT125/025
FPT150/025
15.17
16.13
19.91
BT - Button
1.00" (25 mm)
1.25" (31 mm)
1.50" (37 mm)
0.25" (6 mm)
0.25" (6 mm)
0.25" (6 mm)
BT100/025
BT125/025
BT150/025
13.28
15.17
18.02
CA Connecting arm
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
0.50" (12 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
CA100/050
CA100/100
CA100/150
CA100/200
CA100/250
CA100/300
CA100/350
CA100/400
13.28
15.17
17.07
18.96
20.87
22.76
24.65
26.55
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
0.50" (12 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
CA125/050
CA125/100
CA125/150
CA125/200
CA125/250
CA125/300
CA125/350
CA125/400
15.17
17.55
19.91
22.29
24.65
27.03
29.39
31.77
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
0.375" (10mm) for 0.25" (6mm) Glass Thickness
0.52" (13mm) for 0.375" (10mm) Glass Thickness
0.63" (16mm) for 0.50" (12mm) Glass Thickness
PGS 100-F025
PGS 100-F038
PGS 100-F050
26.55
26.55
26.55
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
0.375" (10mm) for 0.25" (6mm) Glass Thickness
0.52" (13mm) for 0.375" (10mm) Glass Thickness
0.63" (16mm) for 0.50" (12mm) Glass Thickness
PGS 125-F025
PGS 125-F038
PGS 125-F050
30.35
30.35
30.35
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
0.375" (10mm) for 0.25" (6mm) Glass Thickness
0.52" (13mm) for 0.375" (10mm) Glass Thickness
0.63" (16mm) for 0.50" (12mm) Glass Thickness
PGH 100-F025
PGH 100-F038
PGH 100-F050
26.55
26.55
26.55
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
0.375" (10mm) for 0.25" (6mm) Glass Thickness
0.52" (13mm) for 0.375" (10mm) Glass Thickness
0.63" (16mm) for 0.50" (12mm) Glass Thickness
PGH 125-F025
PGH 125-F038
PGH 125-F050
30.35
30.35
30.35
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
WSP100/100
WSP100/150
WSP100/200
WSP100/250
WSP100/300
WSP100/350
WSP100/400
13.28
15.17
17.07
18.96
20.87
22.76
24.65
PGS Panel grip - straight
PGH Panel grip - hook
WS Wall spacer
Slot Width (x)
inches | mm
CUSTOM HARDWARE IS ALSO AVAILABLE. FOR MORE INFORMATION PLEASE CALL 1 888 505 GLASS OR EMAIL HARDWARE@JBERMANGLASS.COM
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Joel Berman Glass Studios | Hardware Price (2 of 2)
Part | Description
Diameter
inches | mm
Length
inches | mm
Order Number
Unit Price
WS Wall spacer
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
WSP125/100
WSP125/150
WSP125/200
WSP125/250
WSP125/300
WSP125/350
WSP125/400
15.17
17.55
19.91
22.29
24.65
27.03
29.39
WS Wall spacer
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
WSP150/100
WSP150/150
WSP150/200
WSP150/250
WSP150/300
WSP150/350
WSP150/400
18.02
20.87
23.71
26.55
29.39
32.24
35.09
PS Panel spacer
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00"(25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
1.00" (25 mm)
0.50" (12 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
PSP100/050
PSP100/100
PSP100/125
PSP100/200
PSP100/250
PSP100/300
PSP100/350
PSP100/400
13.28
15.17
17.07
18.96
20.87
22.76
24.65
26.55
PS Panel spacer
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
1.25" (31 mm)
0.50" (12 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
PSP125/050
PSP125/100
PSP125/150
PSP125/200
PSP125/250
PSP125/300
PSP125/350
PSP125/400
15.17
17.55
19.91
22.29
24.65
27.03
29.39
31.77
PS Panel spacer
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
1.50" (37 mm)
0.50" (12 mm)
1.00" (25 mm)
1.50" (37 mm)
2.00" (50 mm)
2.50" (62 mm)
3.00" (75 mm)
3.50" (87 mm)
4.00" (100 mm)
PSP150/050
PSP150/100
PSP150/150
PSP150/200
PSP150/250
PSP150/300
PSP150/350
PSP150/400
18.96
21.81
24.65
27.50
30.35
33.19
26.55
37.77
SS Socket set screw
1/4 NC (6 mm)
1/4 NC (6 mm)
1/4 NC (6 mm)
1/4 NC (6 mm)
0.75" (19 mm)
1.00" (25 mm)
1.25" (31 mm)
1.50" (37 mm)
SS025/075
SS025/100
SS025/125
SS025/150
0.37
0.44
0.57
0.74
NY Nylon washer
0.50" (12 mm)
0.75" (19 mm)
1.00" (25 mm)
1.25" (31 mm)
1.50" (37 mm)
1.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
NY050
NY075
NY100
NY125
NY150
0.77
0.11
0.15
0.28
0.37
NB Nylon bushing
0.38" (10 mm)
0.25" (6 mm)
NB038
0.06
CUSTOM HARDWARE IS ALSO AVAILABLE. FOR MORE INFORMATION PLEASE CALL 1 888 505 GLASS OR EMAIL HARDWARE@JBERMANGLASS.COM
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
18
Hardware | Order Terms & Conditions
I. Order Standard Joel Berman Glass Studios (JBGS) Hardware
1
If you are uncertain of Standard Hardware required for your project, complete the Hardware
Information Form. Attach a finished working drawing of the installation that includes the basic
dimensional information pertinent to the hardware application (ie: ceiling heights, finished
opening dimensions, offset distances, wall conditions...).
2
Please email completed Hardware Information Form and drawings to hardware@jbermanglass.com
Attn: Hardware Designer or the JBGS representative for your area.
3
Based on this completed information, a JBGS Hardware Designer or Representative will assist you
to determine the appropriate hardware for your project and generate a quote.
4
Alternatively, the JBGS design team can design your installation and provide you with CAD drawings.
Design services will be required to complete the design. A fee of up to $125/hour will apply.
II. Order Custom JBGS Hardware
1
JBGS can custom manufacture our Standard Hardware Components to meet your installation
requirements.
2
Complete the Hardware Information Form with a design intent sketch or working drawing that
includes the basic dimensional information pertinent to the hardware application (ie: ceiling
heights, finished opening dimensions, offset distances, wall conditions etc.).
3
Please email completed Hardware Information Form and drawings to hardware@jbermanglass.com
Attn: Hardware Designer or the JBGS representative for your area.
4
A JBGS Hardware Designer will contact you to review your Custom Hardware requirements and a
quote will be issued. Pricing and design time can only be determined on a case by case basis.
(A design fee of up to $125/hour will apply).
5
All custom hardware requires 2–4 weeks production time upon approval of the final drawing and
payment is received.
Note
Custom Hardware applications designed and specified by out-of-house designers/architects/contractors are not
the responsibility of JBGS. JBGS does not accept responsibility for any performance problems associated to these
specific custom applications. The onus is on the designer/architect/contractor to provide a sound solution for
their respective final clients.
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
Hardware | Order Terms & Conditions
III. Order Site Specific JBGS Hardware
1
All metal work that is not derived from JBGS Standard Hardware is classified as “Site Specific
metal fabrication”.
2
Complete the Hardware Information Form with a design intent sketch or working drawing
that includes the basic dimensional information pertinent to the hardware application (ie:
ceiling heights, finished opening dimensions, offset distances, wall conditions...).
3
Please email completed Hardware Information Form and drawings to hardware@jbermanglass.com
Attn: Hardware Designer or the JBGS representative for your area.
4
A JBGS Hardware Designer will contact you to review your Custom Hardware requirements
and a quote will be issued. Pricing and design time can only be determined on an individual
basis. (A design fee of up to $125/hour will apply).
5
All Site-Specific Hardware requires 4–6 weeks lead-time upon approval of the final drawing
and payment is received.
Return Policy
Standard Hardware in original condition may be returned for credit within 60 days of original
invoice. A restocking fee will apply. Please contact your JBGS representative prior to returning any
Standard Hardware merchandise. Returns must be insured for the original invoice amount.
Shipping charges will not be covered by JBGS.
Shipping
All orders will be shipped via Federal Express or UPS. Unless specified, your order will be shipped
on an overnight service. JBGS will require a FedEx or UPS account number, otherwise shipping
charges will apply. JBGS will require an exact delivery address along with telephone number,
contact name, and Federal Tax ID number (or social insurance number). We will not be able to
ship your order without this information. Most orders for stock merchandise will be shipped
within 48 hours of receipt of your purchase order and payment. Special crating or handling
charges may apply to oversize or custom orders. Your order must be inspected immediately upon
arrival. If your order is not received in satisfactory condition, keep all packaging material and notify
JBGS within 24 hours.
Payment options
Payment can be made to Joel Berman Glass Studios Ltd by Visa, wire transfer or certified
cheque/money order (please allow 2 days for processing time).
Note: Site-specific metal fabrication installations that
are designed and specified by out-of-house
designers/architects/contractors are not the
responsibility of JBGS. JBGS does not accept
responsibility for any performance problems
associated to these specific custom applications. The
onus is on the designer/architect/contractor to provide
a sound solution for their respective final clients.
Warranty
Site specific metal fabrication installations designed and specified by out-of-house
designers/architects/contractors are not the responsibility of JBGS. JBGS does not accept
responsibility for any performance problems associated to these specific applications. The onus
is on the designers/architects/contractors to provide a sounds solution for their respective
clients.
Samples and Prototypes
JBGS does not provide hardware samples. Custom prototypes will be invoiced on a per project basis.
©2015 JOEL BERMAN GLASS STUDIOS All rights reserved. JBGS15-01
20