1. No category

Using the Jabra GN9120 DG Cordless Headset with a Gigaset Cordless Phone
Before trying to pair your headset, charge it for at least one hour and check that your phone is ready to make and receive
calls.
1.
First, activate the listening in function on your Gigaset handset:
In some models you will find this in Menu – Settings – Base – Listening in. On others you can find it in Menu –
Settings – Telephony - Listening in (when you press OK, a tick should appear to indicate that it is activated).
2.
On the headset, press and hold down the three control buttons together, for around 6 seconds, until a flashing red
light appears on the side of your headset.
Control buttons
A flashing red light will appear here
Release the button and press the search button on the base of your phone, for 10-30 seconds, until the flashing red light goes
out.
If the light does not go out, check that the phone’s pin is the default number (0000), then repeat the process.
Making and receiving calls with your Jabra GN9120 DG
To receive a call directly to your headset:
When a call comes in, wait for your handset to ring twice, then press the middle call control button on the side of your
headset (see below).
To end the call, press the call control button again.
Making a call
1.
2.
3.
Dial the number you want to call with your telephone handset and press the call button as normal.
After two rings, press the call control button on the side of your headset (the middle button). The call is now
transferred to your headset.
To end the call, press the call control button again.