Download Report

Johnson España
División Antideslizantes
Avda. M-40, nº 5 - 7
28925 Madrid
Madrid – España
Tlf. (00 34) 913 57 13 22
Fax (00 34) 913 57 18 20
Alamb. Comb. Grande Guerra, 107. 2º
2750 Cascais
Lisboa – Portugal
Tlf. (00 351) 21 482 21 02
Fax (00 351) 21 482 21 02
johnson@johnsonesp.com
56 Gloucester Road
Kensington. Box No 332
SW 7 4 UB
London – U.K.
Fax 020 75819213
REF:. 2011001615/
DETERMINATION OS SLIP RESISTANCE.
TREATMENT EFFECTIVENESS:. SIZE OF SINTERED CERAMICS, SA
C / Del IBERSID - Cami Pol Fund - Almazora
Castellón
The treated areasSLIP:.
EXAMPLE MODEL TILE ARANCIO held
With out implementation of the Johnson landslide tunnel
TESTS:.
Determination of slip resistance to the following standards:
- DB Technical Building Code. UNE ENV 12633
- European Directive 89/654. European Committee for
Standardization. ENV ISO 10545-17
- American Standard C-1.028/85
- Standard DIN 51130
- Standard DIN 51097
MEASUREMENT DATE:. 03/06/2011
UNE 12633:2003 ENV DETERMINING SLIDING RESISTANCE DESIGNATION OF
STANDARD UNE-EN 12633:2003:
•
USRV measuring coefficient of friction of the pendulum is made in both directions.
At each point of measurement is carried out 5 shots with the pendulum, as
indicated by the average of the last three readings UNE-EN 112633:2003.
For each tile tested was chosen an area of its front. This area has been tested
using the sliding shoe width of 76.2 mm, a length of 25.4 mm and a thickness of 6.4
mm rubber. Tested clean length is 126 mm and the reading is done on the scale of
C the device, according to the temperature calibration procedures and included in
the UNE-ENV 12633:2003, approved by the European Committee for
Standardization.
TEST CONDUCTED:
DB tested by the Technical Building Code, the application of VNS 12.633:2003 UNE
Measuring the specific area is classified internally as a general reference that details the
area where the measurement is made:
TEST TUBE ADDRESS:
SAMPLES OF ADDRESS A:
Testtube1: Rd 19 – Testtube 2: Rd: 18 – Testtube 3: Rd 17 –Testtube 4: Rd 17 – Testube
5: Rd 17
SAMPLES OF ADDRESS B:
Testtube1: Rd 19 – Testtube 2: Rd: 17 – Testtube 3: Rd 17 –Testtube 4: Rd 17 – Testube
5: Rd 17
RESULTS: RD: 17 Category: 1
Classification slippery AS INDICATED IN THE NEW BUILDING CODE TECHNICAL.
SOIL CLASS OBLIGATIONS ACCORDING TO YOUR LOCATION
DETERMINATION OF ISO STANDARD SLIDING RESISTANCE ENV 10545-17
European Committee for Standardization. ENV ISO 10545-17
APPOINTMENT OF ENV ISO 10545-17:
Results wet: 0.23
Results dry: 0.34
The measurement of dynamic coefficient of friction, self-propelled by a device called
Friction FLOOR, advancing 17 mm with a rubber foot and a constant mass of 200 grams,
with a constant vertical force, which is a meter to test dry wet.
EUROPEAN DIRECTIVE 89/654/EEC of the Council of 30.11.1989 on the minimum
safety and health in the workplace indicates that soils should be slip resistant.
Sample Results
DETERMINATION OF SLIP RESISTANCE STANDARD C-1028/85
COEFFICIENT OF STATIC FRICTION C-1028/85 STANDARD
DESIGNATION OF STANDARD C-1028-85.
Was measured by an apparatus of ASM, measuring the force of friction. The measurement
is made in four different directions, measuring wet and dry, averaged over the same.
Sample Results:
Readind wet: 40
Reading dry: 47
DIN 51130 STANDARD DESIGNATION
DETERMINATION OF SLIP RESISTANCE DIN 51130 STANDARD
The test method of DIN 51130 standard defines five types of parameters to determine the
slip of a pavement in f unction of the maximum slope of each of which can travel safely.
Sample Results
Angle:. 16 º
Category according to EN: R10
DETERMINATION OF SLIP RESISTANCE DIN 51130 STANDARD
DIN 51097 STANDARD DESIGNATION
The test method of DIN 51097 standard, this test is performed on a device in which the
person performing the test, walking barefoot on a plane sloping at different angles. The
surface to be covered with tile to be tested and continuously impregnated with a soap
solution.
The tilt angle can still stand safely without slipping, is the measure of the trial.
SAMPLE RESULT: 24ª CLASS A
The results to which this report relates only to the objects under test. The report must be
reproduced in part without the written approval of the laboratory.
Johnson España
División Antideslizantes
Tlf. 91 357 13 22