1. No category

Preliminary Product Guide
High Capacity Forklift Trucks
H40.00-48.00XM-12
40 000 – 48 000 kg @ 1 200mm
New Features From Proven Design
These new H40.00-48.00XM-12 fork lift trucks
Clean Power Choice
belong to the same product family as the successful
The new H40.00-48.00XM-12 fork lift trucks are
H40.00-50.00XM-16CH container handlers.
available with a choice out of two drivelines:
›
The major difference of these new fork lift trucks, is
Standard: Powertrain package with 300Hp engine and
the front-mounted operator’s cab, for excellent fork
TE27 transmission and PRC7534 drive axle:
tip visibility.
›
‘Vista’ cab, equipped with air-conditioning as
standard.
›
›
The operator compartment is the well-known Hyster
Forklift models are available with capacities of
40.000 to 48.000 kg @ 1200 mm load centre, on
litre, 6-cyl.-in-line, turbo with intercooler.
›
Forklift & Container handling versions are
›
›
Transmission: S.O.H. (Spicer Off-Highway, formerly
Clark), model TE27 4-speed powershift.
›
With automatic gear shifting APC200 ‘Soft-shift',
including forward-reverse shifting lock-out.
removed, the forks can be used for general cargo
handling.
Performance: 224 kW (300 Hp) @ 1800 rpm,
maximum torque: 1424 Nm @ only 1000-1400 rpm.
available, equipped with (low-) fork-mounted 20’-40’
telescopic container spreader. With the spreader
Low exhaust emissions: conform to EC Tier 3
standard for NRMM.
forks.
›
Engine: Cummins QSM 11, industrial Diesel, 10.8
›
Drive axle: AxleTech (Meritor, formerly Rockwell),
model PRC7534, with Wet Disc brakes.
02
Product Features
Optional: Powertrain package 365Hp engine and TE32
Maximum Productivity
transmission and PRC7534HD drive axle:
›
›
›
›
average lifting speed is a fantastic 0.385 m/sec.*)
Engine: Cummins QSM 11 with 272 kW (365 Hp) @
1800 rpm, maximum torque is a massive 1674 Nm @
Lifting speeds are class leading: The practical 4-mode
›
Maximum drive speeds are competitive at 20 km/h
only 1000-1400 rpm.
(with load) to 22 km/h (without load), with the
Transmission: S.O.H. model TE32 auto-shift
standard 224 kW (300 Hp) engine
transmission.
*Average of four lifting modes:
Drive axle: AxleTech model PRC7534 Heavy Duty,
unladen lift speed = 0.30 m/sec.
with reinforced spindles.
fully laden lift speed = 0.24 m/sec.
unladen lowering speed = 0.50 m/sec.
laden lowering speed = 0.50 m/sec.
03
Product Features
Outstanding All-round Visibility
Choice Of In-cab Controls
›
›
›
The operator is ideally positioned towards the front of
the machine, for optimal visibility of the forks. This
control of mast lift & tilt, sideshift and when fitted:
position also offers an excellent view all-round the
spreader functions extend & retract, slew & reach,
machine.
twistlocks; plus the horn.
Visibility forwards and towards the forks has also
Or as an alternative:
been greatly improved by the Hyster ‘Vista’ mast that
›
is 350 mm wider than before. The extra width also
›
›
›
mast lift & tilt functions, plus switches for the sideshift
and fork positioners.
Rearward vision is greatly enhanced by the low profile
Note: The joystick control is recommended for lift
and sloping shape of the counterweight.
trucks with container spreader with a total of 7
The Hyster ‘Vista’ cab is state-of-the-art in driver
functions. Many operators also prefer the joystick
comfort and also provides clear sight lines all round.
control for trucks fitted with forks only, with 4 or 5
Air conditioning is standard. In-cab noise level is
equivalent.
Driver on-off access is easy, with wide steps and
conveniently placed handrails.
04
Conventional levers & switches: Two levers for the
makes the mast stronger.
comfortably low at 73 dB(A) driver’s ear BITA
›
Newly developed joystick for ‘single-handle’ intuitive
functions.
Dream Machine
›
combination with quickly removable (lightweight
protective lock-out function on forward-reverse
aluminium) floor plate sections, this provides truly
shifting.
Standard Equipment:
Air conditioning, full-suspension seat, seat belt,
reading light, extra air circulation fan.
›
Auto-shift transmission is standard. With APC200
soft-shift system. The transmission also features a
excellent access for service work.
›
›
The side-tilting cab is electrically powered. In
Tropical cooling package, for working in ambient
›
›
Complete light kit and flashing beacon.
Side-tilting cab, with electrical operation, is
standard.
This provides excellent service access, in
combination with quick removable floor plates.
temperatures up to 50°C.
›
Engine and transmission protection. With initial
power reduction and finally engine shut-down.
›
Heavy duty air filter with a cyclonic pre-cleaner plus
a 2-stage filter housing.
05
Product Features
Optional Equipment:
›
›
Without air conditioning.
In-Cab and Operator convenience items:
– Air suspension seat,
– Trainer seat (small extra seat cushion),
– Support stand for communication equipment,
– Converter 24 V to 12 V DC
– Mast tilt indicator.
›
›
›
›
›
06
HID (Xenon) type working lights, instead of standard halogen type.
Hydraulic accumulator in the lift system, acting as shock absorber.
Radial tyres (with tread or as ‘slicks’), instead of standard Bias (diagonal) tyres.
Coil ram pole, quick disconnect hang-on type, available in various lengths.
Fork-mounted 20’-40’ telescopic container spreader, in low-mounted position.
Specification Highlights
H40.00XM-12
H44.00XMS-12
H48.00XM-12
@ 1200 mm load centre
40,000
44,000
48,000
Machine weight (kg) **
50,120
52,350
55,150
Wheelbase y (m)
5.90
5.90
5.90
Length L1 (m)
8.13
8.13
8.13
Width b2 (m)
4.20
4.20
4.20
height h6 (m)
3.88
3.88
3.88
Turning radius Wa (m)
7.93
7.93
7.93
Tyre size all-round (inch)
18.00 x 25
18.00 x 25
18.00 x 25
Mast lift heights TOF (m)
4.41 to 9.89
4.41 to 9.89
4.41 to 9.89
Carriage types available
Non-sideshift
Non-sideshift
Non-sideshift
Nominal capacity (kg)
Drive Line
or
or
or
Integral sideshift
Integral sideshift
Integral sideshift
Standard: 224 kW (300 Hp) engine and TE27 autoshift transmission
Optional: 272 kW (385 Hp) engine and TE32 autoshift transmission
Lift speeds (m/sec.) with
0.24 laden
0.24 laden
0.24 laden
224 kW (300 Hp) engine
0.30 unladen
0.30 unladen
0.30 unladen
Lift speeds (m/sec.) with
0.26 laden
0.26 laden
0.26 laden
272 kW (385 Hp) engine
0.30 unladen
0.30 unladen
0.30 unladen
20 laden
20 laden
20 laden
22 unladen
22 unladen
22 unladen
Travel speeds (km/h)
** with 4.41 m TOF lift height mast, Non-sideshift carriage and 2.44 m long forks
Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment.
07
Strong Partners, Tough Trucks, for
Demanding Operations, Everywhere.
Hyster supplies a complete range of
warehouse equipment, IC and electric
counterbalanced trucks, container handlers
and reach stackers.
Hyster is committed to being much more than
a lift truck supplier. Our aim is to offer a
complete partnership capable of responding to
the full spectrum of materials handling issues:
Whether you need professional consultancy on
your fleet management, fully qualified service
support, or reliable parts supply, you can
depend on Hyster.
Our network of highly trained dealers provides
expert, responsive local support. They can
offer cost-effective finance packages and
introduce effectively managed maintenance
programmes to ensure that you get the best
possible value. Our business is dealing with
your materials handling needs so you can
focus on the success of your business today
and in the future.
Hyster Europe, Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England.
Tel: +44 (0) 1252 810261
Fax: +44 (0) 1252 770702
Email: info@hyster.co.uk
http://www.hyster.co.uk
A division of NACCO Materials Handling Limited.
00/07/TLC Printed in England
Form No. 000000
,® & Monotrol® are registered trademarks of Hyster Company in certain countries.
Hyster,®
™
, Pacesetter VSM™
, DuraMatch™
, DuraMatch Plus™
, TouchPoint™
, TouchControl™
, EZXchange™
, HSM™ & Vista™ are
, Fortens™
trademarks of Hyster Company in the United States and in certain countries where rights in unregistered trademarks are recognised.