1. No category

NC-800U
Intelligent universal
battery charger
Main product features (for detailed specifications see next page)
everActive NC-800U is a genuine, universal Ni-MH/Ni-Cd battery charger, intended to use for Ni-MH
and Ni-Cd rechargeable batteries of different types: AA (R6), AAA (R03), C (R14), D (R20) and HR22
(9V). The charger is equipped with 8 independent charging slots, which can be used to charge different
batteries at the same time in different combination:
 1-6 pcs of AA and/or AAA batteries,
 1-4 pcs of C and/or D batteries,
 1 or 2 pcs of 6F22 batteries (separate charging slots).
For example: NC-800U allows simultaneous charge of: 4x AA/AAA + 2x C/D + 2x HR22.
everActive NC-800U uses highly optimized charging process with -ΔV full charge termination method
for maximum battery performance. After inserting the batteries, the charger automatically runs a selfdiagnostic program and – depending on the cells condition – then chooses appropriate steps:
discharge, pre-charge, or standard charge. At the end of the process batteries are switched to trickle
charge mode to maintain their full charge state. Multi-step charging process keeps the cells in a good
condition – it restores battery's full capacity and minimizes memory and "lazy battery" effects.
Unique feature of NC-800U: the charger shows the approximate state of charge in “%” scale.
Baltrade R. Czesnowski, B. Czesnowska sp.j.
Gen. J. Hallera 132
80-416 Gdańsk, Poland
EU VAT PL5840202116
phone: +48 58 552 20 20 ext. 207
phone: +48 509 960 425
fax: +48 58 552 20 20
e-mail: contact@baltrade.eu
www: www.baltrade.eu
NC-800U
Intelligent universal
battery charger
Product specifications
Input
100-240V AC 50/60Hz 30W
Supported battery types
Ni-MH / Ni-CD rechargeable batteries of any capacity: 1-6pcs of R03 AAA / R6
AA, 1-4pcs of R14 C / R20 D, 1-2pcs of HR22 9V
Operating modes
charge / discharge / refresh
Pre-charge current (mA)
AA/C/D: 500mA, AAA: 250mA, HR22: 30mA
Standard charge current (mA)
AA/C/D: 1000mA, AAA: 500mA, HR22: 60mA
Discharge current (mA)
AA/C/D: 600mA, AAA: 500mA, HR22: 60mA
Trickle charge current (mA)
AA/C/D: 55mA, AAA: 25mA, HR22: 4mA
 microprocessor controlled,
 -ΔV charge termination method,
Safety
 battery overheat protection,
 charger overheat protection,
 alkaline, damaged and non-rechargeable battery detection
USB output
5V DC, max 500mA
LCD Display
multi-segment with separate, digital readout for each charging slot with
percentage scale of charging progress and additionally 8 two-color LEDs,
indicating mode.
Dimensions
210 x 175 x 48 mm
Warranty
2 years of limited warranty
User’s manual
included: english, polish
R03 AAA: 600mAh - 1.5h, 800mAh - 2h, 1000mAh - 2.5h,
Maximum charging time
(approximate)
R6 AA: 1500mAh - 2h, 2000mAh - 2.5h, 2500mAh - 3h 15min, 2700mAh - 3.5h
R14 C: 3000mAh - 4h, 4500mAh - 5h 50min,
R20 D: 3000mAh - 4h, 6000mAh - 7h 45min, 10000mAh - 13h
9V HR22: 150mAh - 3h, 200mAh - 4h, 250mAh - 5h
This product is in conformity with all provisions of Directive LVD 2006/95/EC, Directive EMC 2004/108/EMC and it complies
with relevant European Standards (EN).
Copyright 2015 Baltrade R. Czesnowski, B. Czesnowska sp.j.
Baltrade R. Czesnowski, B. Czesnowska sp.j.
Gen. J. Hallera 132
80-416 Gdańsk, Poland
EU VAT PL5840202116
phone: +48 58 552 20 20 ext. 207
phone: +48 509 960 425
fax: +48 58 552 20 20
e-mail: contact@baltrade.eu
www: www.baltrade.eu