New Products from Europe`s No. 1
Hörmann at the 2015 BAU New Products from Europe’s No. 1 ThermoPro entrance doors / ThermoPro Plus entrance doors New design styles with inlays with a stainless steel look ThermoPro with inlays with a stainless steel look TPS 015 • Stainless steel handle HB 14-2 on steel infill with inlays with a stainless steel look • U D-value up to 1.1 W/(m²·K)* • Also available as ThermoPro Plus • Available immediately TPS 025 • Stainless steel handle HB 14-2 on steel infill with inlays with a stainless steel look, full glazing: double glazing, insulated glass, laminated safety glass outside, single-pane safety glass inside, Mastercarré • UD-value up to 1.4 W/(m²·K)* • Available immediately TPS 015 TPS 025 TPS Plus 800 TPS Plus 810 ThermoPro Plus with rectangular glazing and stainless steel frame Style TPS Plus 800 • Stainless steel handle HB 38-2 on steel infill • 4 rectangular glazings with stainless steel frame: triple insulated glass, exterior laminated safety glass, centre sand-blasted float, interior clear laminated safety glass • U D-value up to 0.88 W/(m²·K)* • Available immediately Style TPS Plus 810 • Stainless steel handle HB 38-2 on steel infill • 3 rectangular glazings with clear all-round stripe and stainless steel frame: triple insulated glass, exterior laminated safety glass, centre sand-blasted float, interior clear single-pane safety glass • UD-value up to 0.96 W/(m²·K)* • Available immediately * Depending on the door size, stated values for RAM 1230 × 2180 mm 2 Easy opening of the ThermoPro Plus entrance doors with the new comfort locks Comfort locks for ThermoPro Plus Multiple-point locking with opening via a hand transmitter • Door locks automatically upon closing (mechanical) • Door can be opened from the outside via the hand transmitter or profile cylinder • Door can be opened from the inside via the hand transmitter, intercom system, profile cylinder or lever handle • Motor-driven opening can be deactivated by locking the main latch via the profile cylinder. • Available from summer 2015 Hand transmitter HSE 2 BS Textured black with plastic caps Knob cylinder with electronic access control • The free-moving knob cylinder on the outside is coupled temporarily by stopping the transponder • The door is unlocked from outside by turning the cylinder • The door is unlocked from the inside via the knob cylinder • Available from summer 2015 Access transponder 3 Aluminium entrance door ThermoSafe New door styles matching sectional garage doors New ThermoSafe entrance door styles • 6 new styles with grooves and glazings • Matching sectional garage doors and M, L and D-ribbing • Available from spring 2015 • Style 514 available from summer 2015 4 Version opening outwards • Optionally available for all ThermoSafe entrance door styles • Available from summer 2015 Style 862 Style 867 Style 189 Style 871 Style 872 Style 514 5 Aluminium entrance door ThermoSafe Increased comfort and improved design 4-sided door seal New, flocked seal 3-sided door seal New finger-scan Additional third seal • Elegantly integrated into the door handle • Additional flocked seal in the door frame • Optional for all ThermoSafe entrance doors • As standard for all ThermoSafe entrance doors from 01.02.2015 • Available from summer 2015 6 Aluminium entrance doors ThermoSafe / ThermoCarbon For generously proportioned entrance designs and increased comfort 3 m 2 m 1 m ThermoCarbon XXL ThermoSafe XXL Room-high entrance doors Automatic lock S5 / S7 Smart • ThermoSafe XXL entrance doors up to 2500 mm height • With condition scanner for the entrance door (locked or unlocked) • ThermoCarbon XXL entrance doors up to 3000 mm height • Operation and condition scanner operated via optional hand transmitter HS 5 BS or BiSecur app • Available from spring 2015 • Available immediately for ThermoSafe entrance doors • Available for ThermoCarbon entrance doors from spring 2015 7 Sectional garage doors New door aesthetics with D and T-ribbed styles 8 LPU sectional garage doors, D-ribbed and T-ribbed • D-ribbed with 2-rib design • T-ribbed with 3-rib design • Silkgrain surface finish in all preferred colours and RAL to choose • Four styles with inlays in stainless steel or timber look for T-ribbing • Available from summer 2015 D-ribbed T-ribbed T-ribbed with continuous ribs in stainless steel look T-ribbed with continuous ribs in timber look T-ribbed with divided ribs in stainless steel look T-ribbed with divided ribs in timber look 9 Garage side doors The practical door to match the garage door Side door NT 60 • 60 mm aluminium frame construction Side door NT 60 for sectional garage doors • The infill is fastened by glazing beads • As standard with guide rollers • For sectional garage doors and RollMatic roller garage doors • Available from summer 2015 Viewed from inside Viewed from outside Lever handle set as standard Side door NT 60 for RollMatic roller garage doors Viewed from inside Viewed from outside 10 Lever handle set as standard Entrance gate operators For special fitting situations Entrance gate operator VersaMatic P • Max. height 2000 mm • Max. width 3000 mm • Max. weight 300 kg • Opening angle max. 120° • Stand-by < 1 watt • Available from summer 2015 3 types of fitting for the operator housing • For different site requirements • For matching operator views • For the optimised operation of the emergency release • For space-saving fitting Type of fitting I Type of fitting II Type of fitting III User-friendly emergency release 11 Control elements with BiSecur radio technology Increased comfort and an exclusive design for your home Exclusive radio internal push buttons and socket receivers • Exclusive design for modern home interiors • Clear lines with harmoniously rounded edges • High-gloss white surface in RAL 9016 • Limited housing depth • Integrated battery, no wiring necessary • BiSecur radio technology with a particularly large range • For the operation of Hörmann operators and socket receivers (see ) • Available from summer 2015 12 1-button radio internal push button • 1 button function with large button for simple operation • Available from summer 2015 4-button radio internal push button • 4 button functions • Available from summer 2015 5-button radio internal push button • 4 button functions plus query button • Available from summer 2015 1-channel socket receiver • Impulse control: power on / power off • For electrical devices up to 2500 watt • With status feedback via the HS 5 BS hand transmitter or the BiSecur app • Can be controlled via all Hörmann hand transmitters, radio control elements, radio internal push buttons or BiSecur app • Available from autumn 2015 2-channel socket receiver • Same functions as 1-channel • Additional volt-free output for the impulse function on garage door operators of other manufacturers (without feedback) • Available from autumn 2015 13 Door operators Ideally suited for barrier-free residences Internal door operator PortaMatic • Can be retrofitted up to a door leaf weight of 80 kg and door leaf widths up to 1100 mm • Dimensions (H × D × W) 60 mm × 78 mm × 560 mm, weight 2.9 kg • Plug-in, 3 m cable • Colour: silver (anodised with a stainless steel look) or RAL 9016 • Fully automatic or semi-automatic, AutoClose (door closer function) push operation, always open, ventilation position (manual) • Integrated BiSecur radio with door position query • Door control and monitoring via BiSecur app or HS 5 BS hand transmitter • Reversing function • Acoustic warning signal, can be selected before and / or during door travel • Direct or indirect LED illumination that can also be selected or selected in addition to the acoustic signal as a warning signal before and / or during door travel • Connection and control of motor locks and electric strikes possible • Available from summer 2015 14 Integrated ECturn Inside entrance door operator • For automatic or manual opening • For automatic closing • Low-energy and automatic mode operation acc. to DIN 18650 / EN 16005 • Easy and quick connection • Additional safety sensors for users requiring extra security • For additional user comfort via radio remote controls • Optional battery for maximum safety in case of power failure – convenient for people with reduced mobility; the door temporarily continues to open and close automatically • Plug-in wiring, simplified fitting • Operating modes: “automatic”, “permanently open”, “night” • Available from summer 2015 15 Door operators for fire-rated and smoke-tight door assemblies For barrier-free construction 16 Door operator HDO 200 • For multi-function doors and hollow profiled section doors • Convenient opening for barrier-free passages • Quiet operation, therefore suitable for many applications, e. g. in offices or hospitals • Speed control ensures a uniform opening and closing speed HDO 200 • Operating modes: “automatic”, “permanently open”, “night”, “closing time” • Integrated programme switch for “off”, “automatic” and “permanently open” • Operation via buttons, radar / motion detector, etc. • Optionally with BiSecur radio technology that can be operated via all Hörmann hand transmitters, radio control elements, radio internal push buttons or BiSecur app • Available from summer 2015 HDO 200 with sensor strip 17 Developed with an eye to the future – the design fulfils the fire-protection requirements of the future product standard EN 16034. • Door leaf as a fully bonded composite construction for particularly high stability and leaf strength • Permanently flush surface • Harmonious overall appearance of double-leaf doors due to the flush-fitting transition between the door leaves • Available in thin and thick rebate versions with 65 mm door leaf • As flush-closing version with 59 mm door leaf Versions / functions T30 EI230 H3 OD Available immediately T90 EI290 H16 OD Available from summer 2015 EI2120 H12 OD Available from summer 2015 MZ D65 OD Available from summer 2015 Additional functions RS RC 2 RC 3 18 Available immediately Available immediately Available from summer 2015 D PE DE VELO FUT URE EURO PE A ARD AND ST New fully bonded composite construction with permanently flush surface R FO N Steel fire-rated door Hx OD New decor surfaces • High-quality decor surfaces in 3 detailed timber looks: Golden Oak Dark Oak Winchester Oak • Frame powder-coated in the basic colour of the timber • Available from summer 2015 T90 EI290 DryFix frames for steel fire-rated doors • Approved for T90 and EI 290 • Available immediately T30 T90 MZ Double-shell block frame • For T30, T90 and MZ doors • Expanded frame depth for 90° openings in hallway areas • For fitting in external walls, the external insulation can be fitted over the frame • Infilling at the factory renders time-consuming on-site fitting with mortar unnecessary • Available immediately 19 Sliding doors / visibility windows More functional properties and increased acoustic insulation Sliding door frame, box design, sealed • Increased acoustic insulation and protection against odours and draughts • Optional acoustic insulation, test value: R W,P ≥ 29 dB • Available from spring 2015 Visibility windows • Double-shell for subsequent fitting with glazing on both sides • High acoustic insulation with tested acoustic rating value R W,P = 54 dB • Bullet-proof, tested class FB 4-S acc. to DIN EN 1522 / 1523 • Available from spring 2015 20 Multi-purpose door and technical room door Innovative solutions for special requirements Multi-purpose door MZ Thermo Plus 011 • 80 mm aluminium frame with thermal break • 65-mm-thick steel door leaf with thermal break and PU rigid foam infill • High thermal insulation with a U D-value of up to 0.82 W/(m²·K) • Available immediately TPS Plus 011 Stainless steel technical room door STS / STU MZ Aqua • Stainless steel multi-purpose door • With water-resistant PU infill • Flush-fitting and as a thick rebate version • Door leaf glued flush over the entire surface • Surface finishes: V2 A, 1.4201, K240 polished, V2 A, 1.4301, matt circular textured finish and V4 A, 1.4571, striped finish • Available immediately 21 Fire sliding doors Elegant and automated solutions for public areas T30 EI230 Flush-stopping fire sliding door without guiding profile The alternative to double-leaf hinged doors, e.g. in entrance areas. High-quality door appearance with concealed parking area in a recess with a recess flap. Versions/functions • T30 / EI230 fire sliding door, flush-stopping • Spring-loaded stainless steel guide bolt, intumescent coating and rubber double seal ensure safety • Flush, fully bonded door sets • Single-leaf • Max. size 7500 × 4500 mm • Available from summer 2015 Surface finishes • Pearlgrain, galvanized • Smooth sheet steel, galvanized • Stainless steel V2 A, 1.4201, K240 polished • Preferred colours, RAL to choose and colours according to NCS Options • Glazing • Wicket door • Compensator • Recess flap Spring-loaded stainless steel guide bolt 22 T30 EI230 T90 EI290 Fire sliding door with convenient operator handling • T30 / EI230 and T90 / EI290 fire sliding door • MZ multi-purpose sliding door • Quick opening and closing during daily operation through the SupraMatic HT operator • Convenient operation with push button, key switch or hand transmitter • Operator is released by a mechanism in case of fire (patent pending) • Reliable closing of the door by weights in case of fire • The external control 360 can be optionally connected • Available from summer 2015 T30 EI230 Hinged garage doors DFT 30-1, DFT MZ • T30 / EI230 fire protection hinged garage door • MZ multi-purpose hinged garage door • Flush fitting • Flush, fully bonded door sets • Block frame 140/75 mm, with all-round sealing • Surface finishes: smooth sheet steel, galvanized Pearlgrain, galvanized • Preferred colours, RAL to choose and colours according to NCS • Single-leaf, max. size 4000 × 4000 mm • Available from summer 2015 23 DD rolling shutter / rolling grille New innovative rolling shutter generation with direct drive operator For door openings up to 12000 mm width Curtains and maximum door sizes (width × height) • Decotherm S, 10000 × 9000 mm • Decotherm A, 5000 × 4500 mm • HR 120 S, 8750 × 8000 mm • HR 120 A, 12000 × 8000 mm • HR 120 aero, 12000 × 8000 mm • HR 116 A, 11000 × 9000 mm • HG-L, 9000 × 5500 mm • HG-V, 12000 × 8000 mm • HG-S, 8750 × 8000 mm • Available from spring 2015 All rolling shutter curtains and rolling grilles HG-L with wind locks or pull-out protection as standard. 24 With hinged operator: more flexibility and simple fitting Narrow aluminium boom • Only 80 mm side space requirement for all door sizes • Fitted quickly and easily directly to the building structure without anchor technology • 2-part design from 6000 mm door height enables better handling during transport and fitting • Pre-assembled aluminium subframe profiles with adapter groove constitute an installation-friendly visual unit with the side guides Limited sideroom • Bearing side only 160 mm • Operator side only 260 mm Variable operator fitting • New support bracket technology provides 3 fitting positions to choose from – downward, horizontal or upward • With the horizontal or upward alignment, no operator technology is visible underneath the barrel Guide channel that is gentle on the door • Newly developed metal holders with polyamide sliding surfaces reduce the wear on the door curtain during feed-in • Easy to service thanks to simple dismantling Easy fitting Operator fitting to the bottom Horizontal operator fitting • The door components are positioned on the building structure using only the metre line and console template • Ready-to-fit unit consisting of curtain, barrel and support bracket is delivered as standard • Side guide markings allow quick adjustment of the door’s end-of-travel positions • Stackable packaging units optimise transport and logistics Operator fitting to the top Guide channel that is gentle on the door 25 DD S6 rolling shutter Fast and reliable with soft start and soft stop Optional accessory package for rolling shutter DD with Decotherm S curtain and colour coating • Powerful FU operators with soft start and soft stop are gentle on the door technology • Up to 30 door cycles per hour or 500 per day are possible • The door construction is designed for at least 200000 door cycles • Opening speed up to 1.1 m/sec • Light grilles in the side guides safeguard the door area even with high closing speeds • No-wear monitoring of the door operation as no sensors are required on the curtain • L-pads on the interior of the curtain minimise noise and wear • Space-saving design optimises the flow of traffic and reduces energy loss • Max. width 5000 mm, max. height 9000 mm • Available from summer 2015 26 SB rolling shutter / rolling grille With a compact operator variation Rolling shutter / rolling grille SB with space-saving operator WA 300 AR S4 • Fitted as a small operator unit next to the shaft, meaning that no components are visible underneath the door barrel • Only 100 mm additional sideroom is required on the operator side • Soft start and soft stop allow gentle and quiet door travel • Due to the power limit in the “Open” and “Close” travel directions, impulse operation without a closing edge safety device is possible for almost all curtain sizes and variations • Installed separately from the operator, the control unit can be quickly and conveniently adjusted from the floor (end-of-travel positions and control parameters) • Can be upgraded with external control 360 • The standard “secured release” facilitates switching to manual door operation (for use inside and outside buildings) • Available with and without curtain cover • Suitable for all SB rolling shutters and SB rolling grilles indoors and outdoors, optimally suited for shop and underground garage doors • Available from spring 2015 27 Side doors for industrial doors With matching frame construction Viewed from inside Lever handle set as standard Viewed from outside Door leaf, frame and threshold rail with thermal break Side door with thermal break NT 80 Thermo • 80 mm aluminium frame construction with thermal break • Panel infill with thermal break, fixing through glazing beads • Glazing frame with thermal break with triple Duratec synthetic glazing • For industrial sectional doors • Available from spring 2015 28 Viewed from inside with synthetic glazing Lever handle set as standard Viewed from outside Viewed from inside with sections Side door NT 60 • 60 mm aluminium frame construction • The infill is fastened by glazing beads • Available in all surface finishes and colours of the respective industrial doors • For industrial sectional doors, industrial rolling shutters, speed sectional doors and spiral doors • Available from spring 2015 29 High-speed doors New sections with thermal break for even better thermal insulation New glazing elements with even frame division • Frame construction with thermal break (67 mm profile plus triple-pane glazing) • Particularly easy to service due to glazing beads for the easy replacement of individual synthetic panes • Available from autumn 2015 30 ISO Speed Cold with an exceptional thermal insulation value for sections of U = 0.24 W/(m²·K) Sections with 42 mm fitting depth for spiral and speed sectional doors HS 7030 PU 42 HS 5015 PU H 42 HS 5015 PU N 42 HS 6015 PU V 42 • Sections with thermal break with good thermal insulation and a U-value for sections of 0.9 W/(m²·K) • Section height 250 mm, matching industrial sectional doors with Micrograin surface, similar to RAL 9006, interior Stucco surface, similar to RAL 9002 • Available from autumn 2015 Sections with 67 mm fitting depth for spiral and speed sectional doors HS 5015 PU H 67 HS 6015 PU V 67 • Sections with thermal break for very high thermal insulation • U-value of sections 0.33 W/(m²·K) • Section height 375 mm, matching industrial sectional doors with Micrograin surface, exterior similar to RAL 9006, interior Stucco surface similar to RAL 9002 • Available from autumn 2015 Sections with 100 mm fitting depth for ISO Speed Cold 100 ISO Speed Cold H 100 ISO Speed Cold V 100 • Excellent thermal insulation through sections with thermal break • Exceptional U-value of sections 0.24 W/(m²·K) • Section height 500 mm, matching industrial sectional doors with Stucco surface, similar to RAL 9002 • Safety light grilles in the side assemblies with non-contact automatic safety cut-out • Available from autumn 2015 31 High-speed doors More convenient opening and connecting Scanprotect • High-end motion-detector and monitoring system with the help of laser technology • Fast and targeted automatic door opening • Reliable advance protection • Convenient adjustment possible via the control • Set-up assistant with visible LED dots • Plug-in type wiring for easy connection to the door control • Connection to the door control • Objects in the monitored area can be masked, “special teach-in” • Due to laser technology, the operational safety function is available even with different floor coverings • Especially suited for outdoor areas, as it is not susceptible to adverse weather conditions like snow or rain • Available from spring 2015 Sensor Scanprotect 32 Reduced fitting times through colour-coding of the wires Colour-coded plug-in control wiring • Wiring of the operator via a distributor box • Wiring of the operator and control through a simple plug-in connection • Easy connection of accessory components and safety devices through colour-coded plug-in connections and connection wires • Fitting time reduced for electrical wiring of the door • As standard, no wiring with terminal screws is required for control and operator, e. g. for the pull switch or the light grille • Available from spring 2015 Safety equipment, above Safety equipment, below Safety equipment, above Safety equipment, below Impulse generator 1 Crash Impulse generator 2 Light grille transmitter Impulse generator 3 Light grille receiver Matching housing concept for 1-phase and 3-phase controls • Matching housing • The same circuit boards (detector, extension, etc.) can be used for the 1-phase and the 3-phase control • New integrated power supply unit with higher performance • Monitored 24V brake circuit • Modified output stage technology • 3rd volt-free contact as standard • Available from spring 2015 1-phase control BK 150 FU E-1 3-phase control AK 500 FUE-1 33 Loading technology Innovative solutions for more convenience and security MWB mechanical wheel blocking system • Prevents the lorry from leaving the safe docking position during the loading process, e.g. by braking of the forklift when driving in or out. • Wheel guide approx. 5 m long, rotating locking arm with fold-out support pedestal, operation bracket with stop sign and operating instructions, release via a foot pedal Optionally with control: • Door release function: the door can only be opened if the lorry is secured against rolling away • Lorry release function: the lorry is allowed to leave as soon as the MWB wheel blocking system is in the home position • Status feedback via 5 LEDs on the control housing inside, via a warning light outside • Available from summer 2015 Push button control 300U With integrated option relay on request • Open limit switch reporting for dock leveller release • No magnet switch required on the door • Minimal wiring required • Available from spring 2015 In combination with door operator WA 300 S4 or WA 300 R S4 • Space-saving and economical • Compatible with all Hörmann dock leveller controls • Door operator power supply through the dock leveller control Push button control 300U in combination with control 420 S 34 Control for the MWB wheel-blocking system Flap dock shelters with straight roof • With gutter as standard • Rain water is conducted over the sides of the door seal and not the front edge • As link arm construction DTLR / DSLR • As scissor construction DTSR / DSSR • As roadway model DTSR-G / DSSR-G • Available from spring 2015 DSLR flap dock shelter Door holder for DOBO system • Swivel type holder for fastening open vehicle doors. • Prevents the vehicle doors from swinging back • Available with a post height of 900 mm and 2 arm lengths: 580 or 880 mm • Available immediately 35 Hörmann’s new Architects’ Program • New, modern, user-friendly interface • Clearly structured navigation via dropdown menus and symbols • Easy search function • No program installation required • Complete database for more than 660 Hörmann products with texts for invitation of tenders and more than 8000 drawings (DWG and PDF format) • Photo-realistic presentation of many products • Available for download at the Hörmann architects’ forum or on a data medium (full version) Issue 01.2015 / Print 01.2015 / HF 86275 EN / PDF The new Architects’ Program 8.0 www.hoermann.com More than 8,000 drawings for over 660 products
© Copyright 2025