Download Report

Arizona
RANGE
92
92
296
296
596
Arizona
1196
The Arizona is a 1200x300mm direct/indirect luminaire designed for use in a variety of ceilings including the SAS 330
metal plank. The design is based around linear T5 lamps in 28W (or 25W eco version) and 54W (or 50W eco version)
in single or twin lamp formats. The optics are the Clearvision proprietary MTX and HXT lenses, which provide a blend
of high transmission, light spread and glare control. The lens has anodised aluminium side bars and polycarbonate
end caps. Retention of the lens within the body is achieved with spring loaded polypropylene shootbolts within the
aluminium channel.
The Arizona is available with a variety of dimming and emergency versions, including an integral daylight/presence
detection head option. The system can be supplied with our own controls (see K-sense on page 8) or for use with
most commonly used systems.
Key features of the Arizona range
• Metal tile (SAS 330), T-grid and plasterboard ceilings
• Single and twin T5 lamps
Order codes
Code
Arizona
AZA-
• Removable lens
Light source
• 3 hour emergency option
1
1
1
2
2
2
2
2
x
x
x
x
x
x
x
x
25W
28W
50W
13W
25W
28W
50W
54W
(T5 eco)
(T5)
(T5 eco)
(T5 eco)
(T5 eco)
(T5)
(T5 eco)
(T5)
Reflectances: 70/50/20
Lumens
-125
-128
-150
-214
-225
-228
-250
-254
Dimming
DSI 1-10V
DALI Switchdim
Fast calculation table - Luminaire quantities
2225
2600
4450
2300
5200
5200
8900
8900
Maintenance factor: 0.80
Ceiling height: 2.70m
The below figures are approximate, suitable as a rough guide for budget costing.
For specific project designs and calculations please contact our design department
enquiries@clearvisionlighting.com
2 x 54W
2 x 28W
Lux
300
400
500
40m2
7
9
11
60m2
9
11
14
80m2 100m2 200m2 300m2
11
13
24
34
14
17
31
45
18
22
39
56
Lux
300
400
500
40m2
4
5
6
60m2
5
7
9
80m2 100m2 200m2 300m2
7
8
14
20
9
10
19
27
11
13
23
33
-DSI
-110
-DALI
-SD
Emergency
3 hour emergency facility
-EMI
3 hour emergency self-test
-EST
3 hour emergency central test (DALI) -DEM
Options
Fixing arms (offer up installation)
Arizona 2 x 28W
105°
105°
90°
90°
75°
75°
60°
60°
160
-FB2
45°
30°
45°
240
15°
0°
cd/klm - CO-CO180 - C90-C270
15°
30°
η=66%
Design
The standard Arizona will
fit into exposed T-Grid or
plasterboard ceilings using
standard ceiling retention
brackets where required.
However it is common
for this size of fitting to
be integrated into metal
ceiling systems, such the
SAS 330, where custom
sizing and brackets are
sometimes required.
Emergency
Lighting
Maintenance
The Arizona, as with the majority of
Clearvision products, is available with a 3
hour maintained emergency facility, where
one of the fluorescent lamps also functions
as the light source under emergency
conditions.
The Arizona is easy to maintain, because the lens hinges or clips out on shootbolts providing easy access to the lamp
or ballast, which is accessible behind a removable cover plate.
Having an easily removeable lens aids cleaning and future replacement of it and other parts at normal end of life. The
Arizona has been designed in such a way in order to minimise future waste flows.
Integrated LED emergency
The Arizona also offers an emergency LED
option. A small 1.2W LED emitter installed
neatly within the corner of the luminaire
directs the light exactly where it is needed
under emergency conditions.
Due to the lower energy requirement of
the LED a smaller battery pack can be
supplied and is installed, together with the
emergency driver, within the luminaire. The
green LED charge indicator is incorporated
within the emitter and is also used for selftest reporting (where specified). The long
life of LEDs, coupled with the limited hours
of use demanded by this application, makes
the Arizona LED emergency option a robust
solution.
Replacement costs are reduced due to the
LED emergency system using a smaller
emergency battery pack. To facilitate this,
the design of the Arizona LED emergency
reflector wing allows for it to be quickly and
easily removed saving labour costs.
As with our conventional emergency range,
LED emergency is a vailable in self test
(to BS EN 62034 : 2006) and central test
reporting versions.
Control Systems
K-SENSE (fig.1)
K-SPACE (fig.2)
K-Sense builds on the simple control offered by Clearvision’s basic dimming system - the K-Dim with the
addition of a multi-sensor housed neatly within the Arizona luminaire itself. As well as simplifying wiring and
avoiding additional ceiling cutouts, the in-built sensor introduces presence/absence detection and daylight
regulation features to the Arizona range.
K-Space offers almost limitless possibilities for control of the Arizona luminaire range and other lighting
products within a single space or entire building. Using the DALI (Digital Addressable Lighting Interface)
protocol, each Arizona is simply connected to a pair of dimming wires leading back to a control/power supply
unit. Likewise input devices such as control panels, sensors and actuators may also be hung off the control
lines at any point.
The movement and daylight sensor head is housed neatly within a specially designed reflector wing, minimising any
impact on the visual appearance or photometric performance of the product.
Arizona master luminaires incorporating sensors can be configured to simply control the slave luminaires around
them, or be interconnected to act as one system. This modular approach provides a high level of flexibility, making the
K-Sense system ideal for many types of space.
For movement detection, K-Sense can be configured to respond in either presence or absence mode or be disabled
totally. In presence mode wherever movement is detected the lighting is energised and remains so until no movement
has been detected for 15 minutes, at which point the lighting will gradually dim down to off. Likewise anyone entering
an area previously vacated for longer than 15 minutes will trigger the lighting on. Absence mode has identical
behaviour to presence, with the difference that the lighting, once off, must be reactivated by a switch. This avoids the
lights activating accidentally and is of particular use in cellular offices where people can enter momentarily.
Daylight regulation maintains the light level within a space around the current dimming level set via wall switch or
remote. Daylight regulation may also be independently disabled if necessary.
More advanced features are achieved by the addition of interface units. This allows the system to interact with a
range of external devices including AV (audio visual) systems, motorised blinds, mains dimmable lighting and other
switchable loads.
A single K-Space network has a cap to the number of devices connected to it, which is usually around 64-128,
dependant on the controller used and each devices power requirements. Multiple K-Space networks can easily
co-exist in isolation to each other, but where a building wide solution is required i.e for central monitoring purposes,
the use of a router is required.
Located at the end of each DALI bus, individual routers are linked together using ethernet cables and communicate
with one another using TCP/IP which is the same protocol used for computer networks. As well as being able to link
a virtually limitless number of networks, this TCP/IP ‘Backbone’ is ready for computer control and from there can
be integrated into an existing BMS (Building Management System). All the system information is stored within the
K-space network meaning that once programmed by computer, it can be disconnected as it’s no longer required for
day-to-day operation.
Fig 2
Floor C
Fig 1
2 Core
Slave
Slave
6 Core
Master
Master
(RJ10)
6 Core
Slave
Slave
Master link cable
(RJ10 Supplied)
6 Core
Sensor Slave
DALI bus
Floor B
RF Wall Plate
(Optional)
RF Remote
(Optional)
Slave sensorline
(RJ10)
Wall Switch
Slave
Slave
6 Core
Slave
Slave
6 Core
Master
Master
6 Core
Slave
Slave
Ceiling Mounted
Extension Sensor
DALI bus
Floor A
Router
Router
Laptop
Ethernet
Switch
TCP/IP Ethernet link
Sensor
Sensor Range
DALI bus
Router
Link to BMS
For more information on controls please email enquiries@clearvisionlighting.com
A Clearvision Dialux Plug-in
is available for download from
www.clearvisionlighting.com
Clearvision is a lighting manufacturer synonymous with
workplaces. 15 years ago we were formed by ergonomists
concerned with the poor quality of most workplace lighting. Since
This document is printed on chlorine
free, environmentally friendly paper that
is manufactured from pulp supplied by
sustainably managed forests.
then our fittings have been used to optimise between efficiency
and ergonomics in the most demanding organisations. Efficiency
in lighting energy use is the key driver of our times, but light
quality is the unspoken need that allows it to be delivered.
Clearvision Lighting Limited
2 Elliott Park, Eastern Road
Aldershot, Hampshire GU12 4TF, UK
TEL : +44 (0) 1252 344011
FAX :
+44 (0) 1252 344066
EMAIL :
enquiries@clearvisionlighting.com
WEB : www.clearvisionlighting.com