1. automotive and vehicles
2. bicycles and accessories

The UK Handmade
Bicycle Show 2013
BespokedBRISTOL
Show
Guide
12th-14th April 2013
tion
a
t
S
d
l
O
Brunel’s
fac eb ook .co m/ uk ha nd ma deb
icy cle sh ow
www.bespoked.cc
Welcome to Bespoked Bristol - The UK Handmade Bicycle
Show
A celebration of the handmade bicycle industry.
It’s a very exciting time for frame building at the moment. The depth of talent and level of
enthusiasm is quite astonishing. The craftsmanship on display here is amongst the best in
the world.
The people who make these wonderful bicycles are the people you will meet and talk with
at the show. They are the ones with the skills to tailor a bicycle to meet your requirements
to make the bike of your dreams. We have asked some of these talented individuals to
combine their skills to make a bicycle live at the show for one very lucky person. Watching a
true master at work is a sight to behold and we hope that this event helps give insight into
what makes the bicycles on display here such special machines.
We would like to thank everyone who has attended and all those exhibiting for making this
year’s show happen. Our thanks go to all who have contributed to the Live Frambuild.
Thank you to Lindsay Gray for all her help and support with the organisation of the show
and of us! Paul Golding (www.goldsealphotography.co.uk) for photographing all the
exhibitor’s work. Thank you to Odoni for providing cycle parking and thank you to our
sponsors for their support.
We hope that you enjoy the show!
Tessa and Phil Taylor
Organisers , Bespoked Bristol
Procceeds raised from the Live Frambuild Prize Draw will be donated to The Bristol Bike Project (www.thebristolbikeproject.org)
World Bicycle Relief (www.worldbicyclerelief.org)
Bespoked Bristol is proudly supported by:
Printed on 100% recycled paper using vegetable based inks by:
Taylor Brothers Bristol Ltd
13-25 Wilder Street - Bristol - BS2 8PY
www.taylorbros.uk.com
BespokedBRISTOL
2013 AWARDS
BEST IN SHOW - supported by Reynolds
BEST TOURING/RANDONNEUR - supported by Columbus
BEST ROAD BIKE - supported by Reynolds
BEST TRACK - supported by Paul Bicycle Components
Talks and Live Framebuild
Friday 12th April - Launch Night
17.00 - 20.00
19.45
- Roller Racing by South Coast Sprints
- Bespoked 2013 Award Winners and Live Framebuild Prize Draw Winner
announced and presented by Mayor George Ferguson
Saturday 13th April
Morning Session - Fitting and Design
10.00 - 10.45
11.00 - 11. 45
13.00 - 13.30
- Frame Fitting with Andy Sexton, Bike Science & Phil Cavell, Cyclefit
- Frame Design, Geometry & Materials with Paul Hewitt, Paul Hewitt Cycles
& Robert Wade, Swallow Bespoke & Brent Curry, Bike Cad (via skype)
- Tom Donhou
Afternoon Session - Construction Begins
14.00 – 14.45
- Tube & Lug Prep, Mitering and Jig with Andrew Denham, Bicycle Academy
& Ryan McCaig, Oak Cycles
- Peter Murray – Portland Oregon to Portland Place 2013
BEST UTILITY - supported by Brooks England
15.30 - 16.00
BEST OFF ROAD - supported by Middleburn
Sunday 14th April
BEST NEW BUILDER - supported by Columbus
MOST INNOVATIVE PRODUCT/DESIGN - Bespoked Bristol
SPIRIT OF CYCLING - Bespoked Bristol
PUBLIC VOTE - supported by Brooks England & Vulpine
PEER AWARD – Bespoked Bristol
AWARD JUDGES
NICK HAND - Graphic Designer, Photographer and Author of ‘Slowcoast’
ROBIN MATHER - Framebuilder, Winner Best in Show 2012 & Public Vote 2012
ROB PENN - Author (It’s All About The Bike), Journalist, TV presenter and Cyclist
NICK REARDON - Journalist
MATT SKINNER - Editor
STEVE WORLAND - Mtb Testing Guru
DAVE YATES - Legendary Framebuilder
Morning Session - Wheel Building
10.30 – 11.30
- Jon, Just Riding Along & Klaus Greuter, Sapim Spokes
Afternoon Session - Construction Continues
14.00 - 15.30
- Brazing with Mark Reily, Enigma & Jason Rourke, Brian Rourke Cycles &
Marco Bertoletti, Legend
Please note that times and events may be changed without prior notice
Bespoked Bristol & The Bicycle Academy - Live Frame Build
Frame + Forks
Frame
Forks
Lugs
Dropouts
- Reynolds 725
- Columbus, Minimal
- Ceeway Framebuilding Supplies
- Paul Component Engineering
Components
Cranks, Bottom Bracket, Headset - Velo Orange – Freshtripe
Bars, Stem & Seat Post
- Nitto – Tokyo Fixed
Saddle
- Brooks England
Brakes
- Campagnolo - Athena Skeleton Brakes – Chicken Cycle Kit
Wheels
Hubs
Rims
Spokes
Tyres
- Paul Component Engineering
- Brick Lane Bikes - H Plus Son Archetype
- Sapim – Chicken Cycle Kit
- Schwalbe
Frame finishing – Matthew Sowter Saffron Frameworks (to be completed after the show)
Paint by Armourtex London (to be completed after the show)
Consumables supplied by Weldability Sif & Air Products
OUTSIDE - ODONI
FOYER - 100 YEARS OF STEEL
1 - SHAND CYCLES
2 - BROMPTON
3 - BIKE SCIENCE
3 - LEGEND
4 - DONHOU BICYCLES
5 - SAFFRON FRAMEWORKS
6 - FIELD CYCLES
7 - SWALLOW
8 - FEATHER CYCLES
9 - TOKYO FIXED
10 - FRESHTRIPE
11 - PAULUS QUIROS
12 - ROCK N ROAD CYCLES
13 - STRADA WHEELS LTD
14 - 14 BIKE CO
14 - ATOMIC 22
14 - ROYCE UK LTD
15 - MANCHESTER CUSTOM CYCLES
16 - COFA ENGINEERING
17 - FLAT FRAME SYSTEMS LTD
18 - RACER ROSA BICYCLES
19 - HOBO CYCLES
20 - PETERBART BICYCLES ATELIER
21 - TED JAMES DESIGN
22 - MERÈNYI BICYCLES
23 - GRUPPO SRL - COLUMBUS
24 - COLOURBOLT
25 - TITCHMARSH CYCLES
26 - RUSBY CYCLES
27 - DOWNLAND CYCLES LTD
28 - DYNAMOWORKS
29 - SCHWALBE
30 - 18 BIKES
31 - MILLTAG
32 - SOUPLESSE
33 - FAGGIN BIKES
34 - OAK CYCLES
35 - WINTER BICYCLES
36 - BONESHAKER
37 - SWORD CYCLES
38 - SLATE CYCLES
39 - CHERUBIM
40 - THE BICYCLE ACADEMY
42 - PAUL HEWITT CYCLES LTD
43 - (IL) SOIGNEUR
44 - DEMON FRAMEWORKS
45 - JUST RIDING ALONG
46 - VILLIERS VELO
47 - PEDALED
48 - CYCLEFIT
49 - CHICKEN CYCLE KIT
50 - MOULTON BICYCLE COMPANY
51 - TRYKIT CONVERSIONS LTD
52A - ROBERTS CYCLES
41A - SVEN CYCLES
41B - BOOCYCLES
a - LIBERTINE BICYCLES
A - OYSTER BICYCLES
B - ERA CYCLES
C - WOODELO
D - DMO FRAMEWORKS
F - BTR FABRICATION
G - TEAGUE BICYCLES
H - IRONWORKS
I - RENWICK BICYCLES
NEW BUILDERS
52B - VELO CAFE MAGASIN
53 - VULPINE
54 - REYNOLDS TECHNOLOGY
55 - BRICK LANE BIKES
56 - CONDOR CYCLES
57 - LOOPWHEELS
58 - PAUL COMPONENT ENGINEERING
59 - SHUTT VELO RAPIDE
60 - MIDDLEBURN CYCLE COMPONENTS
61 - MOSQUITO
62 - ENIGMA TITANIUM
63 - BROOKS
64 - MAWIS
64 - SWRVE
65 - CYFAC - VELO BRANDS
66 - BRIAN ROURKE
STAND - EXHIBITOR
BespokedBRISTOL
Exhibitors 2013
14 BIKE CO
STAND 14
Maker - Lee cooper, Ted james & Lhw Designer - Ted james & Andy Ellis
Where - London, Coventry, Littlehampton Number Made PA - 100
STAND 40
THE BICYCLE ACADEMY
Maker - You Designer Where - Frome Number Made PA - N/A
The Bicycle Academy provides frame building courses and skills masterclasses for
novices, enthusiasts and pro’s, and fully equipped workshop hire for those who
don’t have their own. This year we’re excited to be launching our own range of
frame building tools and Jigs, bicycle sizing and fitting courses for frame builders,
along with other brand new frame building and skills courses too.
Unit 1a - The Welsh Mil - Park Hill Drive - Frome - Somerset - BA11 2LE
01373 473767 hello@thebicycleacademy.org www.thebicycleacademy.org
BIKE SCIENCE
STAND 03
Maker - N/A Designer Where - Bristol, Derby, Rotherham Number Made PA -
Since we opened our doors in Spring 2009, we have built over 500 bikes for our very
satisfied customers. All our frames are hand-built in the UK using British steel. At
14 Bike Co, we don’t simply put you on a bike – we build a bike for you. We start by
measuring for the right size frame. If we have the correct frame in stock, then we
can move on to the next stage. If we don’t, then we’ll build one especially.
Bike Science was established in March 2010 by Andy Sexton. Andy has over twenty
five years of competitive biking experience and over twenty years as a triathlete. While
working at Planet X he identified the need to be able to offer accurate, professional bike
fitting services to riders wishing to buy bikes without being able to try the actual bike
for size first and riders wishing to optimise their riding position to increase performance,
avoid injury or improve comfort. He started Bike Science with these aims in mind.
Elys Yard - The Truman Brewery - 91 Brick Lane - London - E1 6QL
020 7377 7522 sales@14bikeco.com www.14bikeco.com
The Meeting House Annex - Lewins Mead - Bristol - BS1 2NN
0117 9273444 info@bike-science.com www.bike-science.com
18 BIKES LTD
STAND 30
STAND 36
BONESHAKER MAGAZINE
Maker - Matt Bowns Designer - Matt Bowns
Where - The Peak District - UK Number Made PA - 20
Maker - Designer Where - Bristol Number Made PA -
18Bikes have been producing custom frames in the Peak District since 2006. We design
and make frames one at a time to ensure we create the best frame possible. We use the
most appropriate materials and manufacturing techniques and can design and build
any style of frame. We are best known for mountain bike hardtails using Reynolds 853,
but the bikes we are bringing to this years show will demonstrate how versatile we are.
Expect road bikes, lugs, stainless steel, fillet brazing and even aluminium.
Boneshaker Magazine is a celebration of cycling and the people who do it. Full of
articles, personal stories and anecdotes about people and projects doing great
things with bicycles around the globe. It is our hope that the magazine will both
inspire and entertain, raise awareness and bring a smile to your face. Appealing to
both bike-heads and those who may not yet have experienced the true joy and
freedom that can be found from our two-wheeled friends.
8 Castleton Road - Hope - Hope Valley - S33 6RD
01433 621111 Matt@18bikes.co.uk www.18bikes.co.uk
ATOMIC 22
STAND 14
Maker - Atomic 22 Designer - Patrick
Where - Horsham, England Number Made PA -
Atomic22 design and manufacture the highest security fasteners in the world – to secure
your bike components against theft. Manufactured entirely in the UK from aerospace grade
materials, our precision engineered components are designed to offer unparalleled security
without compromising on performance or aesthetics. You can now secure every removable
component, from wheels to brakes, from saddles to rear mechs, all using the patent pending
infiniti3D security system. With your components secure you can enjoy riding your beautiful
bespoke bike, free from the fear of theft, whilst carrying just one compact lock!
Unit 5 - Grayland - Horsham - RH12 4QD
info@atomic22.com www.atomic22.com
www.boneshakermag.com
STAND 66
BRIAN ROURKE
Maker - Jason Rourke Designer - Brian Rourke, Jason Rourke
Where - Stoke on Trent Number Made PA - 200
Brian Rourke framesets have been hand made in Stoke on Trent England since 1972
we have been synonymous with made to measure racing frame having hundreds
of major race win including World and National titles.
194 Waterloo Road - Burslem - Stoke On Trent - ST6 3HF
01782 835 368 www.rourke.biz
BRICK LANE BIKES
STAND 55
Maker - Brick Lane Bikes Designer - Brick Lane Bikes
Where - Poland Number Made PA - 80 -100
Begun as the dream of a former courier, Brick Lane Bikes is one of the Uk’s most notorious
fixed gear specialist bike shops. They offer a huge range of vintage and new components
from their own in house range as well distributing the products from US hand made giants
such as Phil Wood, Paul Components, Aerospoke, Holdfast and Velocity Wheels. With an
international reputation for the quality of their hand made wheels and their made in the
EU La Piovra range of custom frames there is little that the small East London shop doesn’t
offer.
118 Bethnal Green Road - London - E2 6DG
0207 033 9053 info@bricklanebikes.co.uk www.bricklanebikes.co.uk
STAND 02
BROMPTON
Maker - Brompton Bicycle Ltd Designer - Brompton Bicycle Ltd
Where - Brentford, London Number Made PA - 36,000
Brompton Bicycle designs and manufactures the famous Brompton folding bike, a bike that
marries the performance of a full-sized, agile bicycle with the convenience of a truly portable
and storable package. Finely-engineered and elegant, the Brompton has a full-sized frame,
made mainly of steel for strength and stiffness. All of our bikes are made bespoke to order,
with many millions of permutations available. And the bikes are no more unique than their
manufacture – since Andrew Ritchie invented the Brompton in his flat overlooking the
Brompton Oratory, every Brompton is still hand brazed and built in London.
STAND 49
Maker - Designer Where - Number Made PA -
Klaus Greuter, Technical Sales Manager of Sapim spokes is building wheels. Also on
hand are Campagnolo specialist Gary Anderson also Jim Loose of Chicken Cycle-Kit.
Many Italian-made exhibits are displayed: The Campagnolo 80th Anniversary Super
Competition groupset, Campagnolo wheels, Miche cassettes, hubs, chainsets and
wheels, Vittoria Classic and Hora Evo racing shoes, the complete Selle Italia id match
saddle system. Specialite T.A. chainrings and bottles. Rigida/Ryde 29er rims and Fastrider
luggage and bags are also on display. Other features include Nalini custom clothing on
a mannequin.
sales@chickencyclekit.co.uk
STAND 63
www.chickencycles.co.uk
STAND 23
CINELLI - GRUPPO SRL
Maker - Designer Where - Italy Number Made PA -
In bike we trust!
We apply Design principles to our products, but also to our company. Design is
not just looks. Design means shape, first project, outline, technology, technique,
materials, innovation, creativeness, function, quality, uniqueness, know-how,
emotion. We want every product to have an Idea, since, if it is a copy, it cannot be
Cinelli. However, the road to the mission is long and not easy at all.
+39 02952441
Kew Bridge DC - Lionel Road South - Brentford - Middlesex - TW8 9QR
0208 232 8484 www.brompton.co.uk/contact www.brompton.co.uk
BROOKS ENGLAND
CHICKEN CYCLE KIT
STAND 16
info@cinelli.it
www.cinelli.it
COFA ENGINEERING
Maker - Designer Where - Number Made PA -
Maker - Steve Major Designer - Steve Major
Where - Thornbury Number Made PA - N/A
Over almost a century and a half, Brooks England has grown from a small workshop
to a byword in quality craftsmanship. Back in 1865, John Boultbee Brooks left his
hometown of Hinckley in Leicestershire with just £20 in his pocket. On 28 October
1882, Mr Brooks filed his first saddle patent. Inspired by the timeless products
designed by our predecessors, we have revived the original slogan ‘Saddles, Bags,
Etc’ and introduced a range of cycle bags and other cycling accessories.
COFA Engineering. Working with CNC & manual machines with the additional services
you would expect from an engineering workshop we are well equipped to assist with
your project, whether you can’t find the parts that are “quite right” to finish off your
custom frame or you need your classic frame restoring then we can help. We modify,
adapt & machine from scratch to ensure that you get your idea in your hands.
Sales & Marketing - Via V. Emanuele - 11936050 - Pozzoleone - VI - Italy
sales@brooksengland.com www.brookssaddles.com
1 Whale Wharf Lane - Littleton-upon-Severn - Bristol - BS35 1NW
01454 411720 steve@cofa-eng.co.uk www.cofa-eng.co.uk
CHERUBIM
STAND 39
Maker - Shin-Ichi Konno Designer - Shin-Ichi Konno
Where - Japan Number Made PA -
Cherubim Cycles are hand built in Tokyo, Japan by master frame builder Shin-Ichi Konno.
Shin-Ichi is from a family of frame builders, his father started Cherubim in 1965 and was the
head builder for over thirty years, his uncle’s started the famous 3Rensho & Miyuki brands.
Cherubim is now the only one of these brands remaining.
0207 734 1885
4 Peter Street - London - W1F 0AD - UK
websales@tokyofixedgear.com www.tokyofixed.co.uk
STAND 24
COLOURBOLT
Maker - Lee Cooper Designer - Jay Pond-Jones
Where - Coventry Number Made PA - 15 - 30
New collection of ColourBolt bikes for 2013, with handbuilt frames by Lee Cooper,
featuring Columbus XCR and Spirit tubing. Spring 2013 sees further innovation in
the frame finishes.
101 Wardour St - London - W1H 0UN
020 8133 5698 info@colourbolt.com www.colourbolt.com
COLUMBUS - GRUPPO SRL
STAND 23
STAND 44
DEMON FRAMEWORKS
Maker - Designer Where - Italy Number Made PA -
Maker - Tom Warmerdam Designer - Tom Warmerdam
Where - Southampton Number Made PA - 30
The story of the most famous steel tubes in the history of cycling began in 1919 when A.L.
Colombo founded his steel plant with the ambition to “to do business in iron and steel and
make a fair and honest profit”. The result was the history of cycling as we know it: legendary
tube sets AIR, MAX, SL, SLX, NIVACROM (EL and Genius), Altec, Starship and Spirit right up
to 2009’s XCR, the world’s first ever tubeless stainless steel tube set which allows for the
production of a steel frame competitive at the highest level of the sport on all levels: weight,
rigidity, fatigue resistance and of course the remarkably superior handling of steel.
Demon Frameworks was established a few years ago with a vision to produce
the finest custom steel frames right here in England. We use proven construction
methods and the most advanced steel tubing from Reynolds to create beautiful
frames that will last you a lifetime. All Demon frames are custom built, not just
made to measure. This means that each frame is made for the individual customer
and is totally unique reflecting a person’s individual style and taste.
J. M. Loveridge Trading Estate - Southbrook Road - Southampton - SO15 1GQ
07714 751563 tom@demonframeworks.com www.demonframeworks.com
CONDOR CYCLES
STAND 04
Via G. di Vittorio 21 - 2090 Caleppio di Settala (MI) - Italy
+39 02952441 info@columbustubi.com www.columbustubi.com
STAND 56
DONHOU BICYCLES
Maker - Various Designer - Ben Spurrier/Neil Manning/Grant Young
Where - Northern Italy Number Made PA - 2400
Maker - Tom Donhou Designer - Tom Donhou
Where - London Number Made PA - 30
London based Condor Cycles with its store on the Gray’s Inn Road has been serving
London’s cycling community since 1948. Each frame in the Condor range is now hand
built at their factory in Italy. Despite Condor having strong ties with the racing scene,
the range includes bicycle frames for commuting, touring and track made from steel,
aluminium, titanium and carbon. Condor is a family run business and continues the
ethos that there should be no compromise between performance, quality construction,
beautiful ride and style.
Using traditional methods but not afraid to throw in a few modern ones we build
beautiful bicycles. They’re built with the foundations of clear thinking and a love
for working with the customer and the design process in which your dream bicycle
is translated from mind to physical being. Parts are sourced from the UK as much as
possible and its important to be as gentle on our world as we can. But in the end, it’s
handing over your bicycle knowing that it is truly an extension of yourself and both of us
excited about the road that lays in front of it...
49-53 Gray’s Inn Road - London - WC1X 8PP - UK
020 7269 6820 info@condorcycles.com www.condorcycles.com
CYCLEFIT
STAND 48
East London
07828 817 081 tom@donhoubicycles.com
STAND 27
www.donhoubicycles.com
DOWNLAND CYCLES LTD
Maker - Designer Where - London Number Made PA -
Maker - Bryan Jackson and Martyn Hay Designer - Bryan Jackson
Where - Canterbury Number Made PA -
Cyclefit - formed in 2001 Cyclefit is a heart and head company in Covent Garden
with a profound three-way personality split. One third centre of fitting excellence
and originator of professional fitting in Europe – One third Cyclefit school & academy,
teaching students from all over the world and one third designers and purveyors of
custom perfection to cycling connoisseurs. Aside from fitting, Cyclefit are obsessed with
provenance. Where something is from, the names of the people who work there and
what they eat for lunch. Every detail matters.
Frame Building Courses at Downland Cycles. Standard 5 Day Frame Build and Advanced
10 day. The extra week means more practice, bike fitting and CAD design your frame,
different fillet brazing techniques and lightly customise lugs. All this in our new purpose
built training centre with bunk house and great mtb and road riding on the doorstep,
not forgetting Julie’s home cooking and yummy cakes!!! Competition at the show to win
some special prizes, to find out more come and see us!
CYFAC
STAND 28
11 Macklin Street - London - WC2B 5NH
www.cyclefit.co.uk info@cyclefit.co.uk 020 7430 0083
STAND 65
The Malthouse - St Stephens Road - Canterbury - Kent - CT2 7JA
01227 479643 bryan@downlandcycles.co.uk www.downlandcycles.co.uk
DYNAMOWORKS
Maker - Cyfac Team Designer - Cyfac Team
Where - La Fuye, France Number Made PA - 700 - 800
Maker - Chris Sleath Designer - Chris Sleath
Where - Edinburgh Number Made PA -
Hand-crafted Excellence from France’s Loire Valley since 1982. Nestled in France’s
picturesque Loire Valley, CYFAC® has been expertly crafting bicycle frames for more
than 25 years. Drawing inspiration from the world-famous vineyards and epic cycling
lanes of the local terroir, our artisans infuse each frame with a time-honored attentionto-detail and passion for cycling. We are a different breed of frame builder, focusing on
our customer’s unique needs and desires ahead of mass-production and one-size-fits-all
products.
Edinburgh based Dynamoworks produces unique screenprint and letterpress posters
with a bicycle theme. All work is hand produced in small editions up to size A0 on
quality Stockwell and Magnani papers using vintage presses and type. Our work has
been featured in The Ride Journal and Boneshaker magazines and we have exhibited at
Howies, Urban Outfitters, Look Mum No Hands, Artcrank, Lock 7, and Recoat. We are also
stocked in a number of established print shops, galleries and cycle boutiques and work
can be purchased in our online shop.
01404 891 208
luke@velobrands.co.uk
www.cyfac.fr
6/5 Wheatfield Road - Edinburgh - Lothian - EH11 2PT
07817395866 dynamoworks@hotmail.com www.dynamoworks.co.uk
ENIGMA TITANIUM LIMITED
STAND 62
Maker - Designer Where - Number Made PA -
Passion, experience and pride – these things define the Enigma brand, these along
with a fervent desire to show the world how good British manufacturing can be.
Our experience comes from a dedicated team of British craftsman with decades of
knowledge of lightweight bicycle design. Years spent designing, building, and riding the
world’s finest lightweight bikes and components. Our pride and passion is in the work
we do and the products we produce. We are proud to be producing world class British
products to sell to the world.
Unit 11 - Westham Business Park - Eastbourne Road - Westham - BN24 5NH
01323 741807 jim@enigmabikes.net www.enigmabikes.com
FAGGIN BIKES
STAND 33
Maker - Massimo Designer - Massimo
Where - Padova, Italy Number Made PA - 30
We are a little Italian family still producing frames with love like the old times.
Cicli Faggin was born in 1945 in Padova. We are part of the Italian cycling history.
Our frames have won world and Italian road, track and cyclocross races.
We are still producing custom steel, alloy and carbon frames.
Via Jacopo Filiasi 436 - Padova - PD 35128 - Italy
+39 049776246 info@fagginbikes.com www.fagginbikes.com
FEATHER CYCLES
STAND 08
Maker - Ricky Feather Designer - Ricky Feather
Where - Yorkshire Number Made PA - 30
Feather Cycles uses traditional methods to create custom cycle frames from the
latest and also classic materials. Building frames to suit the customers needs and
wants, all the while adding unique details to separate your bike from the masses. At
Feather Cycles the highest quality is key and many, many hours are spent on each
and every frame to make sure you get your perfect bicycle!
07525 243146 ricky@feathercycles.com
FIELD CYCLES
www.feathercycles.com
STAND 06
Maker - Harry Harrison Designer - Field Cycles collective
Where - Sheffield Number Made PA - 15-20 frames + various compnents
Field Cycles is collaboration between a group of friends from various art, design and
engineering disciplines. The partnership was developed out of a common pursuit for
a hand built steel bicycle frame in a return to artisan craftsmanship and a personal
obsession with the bespoke production process. The framesets are fabricated one at
a time with care and attention paid to the unique Field cycles details. The production
process is the combination of the maker’s personal skill and the customer’s interpretation
of the iconic object the bicycle. Each frame is truly a unique object in the world.
07769 693970
harry@fieldcycles.com
www.fieldcycles.com
FLAT FRAME SYSTEMS
STAND 17
Maker - Flat Frame Systems Ltd Designer - Mike Cubbage
Where - High Wycombe, Bucks. Number Made PA - 12 - 24
Flat Frame Systems design and build cycle frames from ‘Engineered Wood’, which
can be covered with high quality Veneer; for example: American Black Walnut or
Ash, Cherry, Oak etc, all the way through to Zebrano. It is known that a Wood Frame
bike is very comfortable to ride, being slightly flexible to allow for a smoother
journey. The CNC cut frame is made from sustainable timber, and the laminations
act like a natural carbon fibre. Each frame is: numbered, signed and dated with a
certificate...to create a unique piece of furniture on wheels.
07757 021098 flatframesystems@hotmail.co.uk www.flatframesystems.com
THE FOOTDOWN
Maker - Designer - Tyson
Where - Number Made PA -
The Foot Down is a fixed gear blog and online shop founded in 2009. The site
features UK-centric news and events as well as product reviews, a user submitted
bike gallery and interviews. The shop sells hand-screenprinted clothing, magazines
and art prints.
www.thefootdown.co.uk/contact/
www.thefootdown.co.uk
FRESHTRIPE
STAND 10
Maker - Velo Orange, Squaretree, Honjo Designer - Chris Kulczycki, Simon Muir
Where - England, Scotland, USA, Canada, Japan, Taiwan Number Made PA -
Retailer and distributor of Velo Orange products - builder of Vintage, Fixed and
Singlespeed bicycles. After spending too long searching the world-wide-web for
that all-important “finishing touch” for project bikes, the decision was made to
import some of the finer overseas items we had found. Your local bike shop probably
doesn’t stock these items - nothing essential, but all very nice nevertheless!
info@freshtripe.co.uk
GURU CYCLES
www.freshtripe.co.uk
STAND 48
Maker - Guru Designer Where - Quebec, Canada Number Made PA Guru Cycles began in 1993 from the desire to tackle the challenge of crafting a high-end
bike made from modern materials. From there we perfected our craft in line with meeting
that challenge. We have made great strides in producing the best possible frames in the
industry and we continue to work diligently towards that goal. Based in the outskirts of
Montreal, Canada, we are a young company, made up of people from within the cycling
industry and without; all converging to bring enthusiasm, fresh ideas, and a pursuit of
excellence that makes Guru a world-class company.
Represented by Cyclefit - 11 Macklin Street - Covent Garden - London
020 7430 0083 info@cyclefit.co.uk www.cyclefit.co.uk/guru
STAND 19
HOBO BICYCLES
Maker - Lee Cooper Designer - Alexander Hatfield & Mike Mudd
Where - Coventry Number Made PA -
Designed and developed in Coventry, England, Hobo Bicycles create individual,
quality bicycles, frames and accessories for the cycling enthusiast. Traditionally
hand-crafted and individually tailored, each is designed to tackle touring, town and
trail with style and assurance.
024 7667 3628
enquiries@hobocycles.co.uk www.hobo-bicycles.co.uk
(IL) SOIGNEUR
STAND 43
Maker - Designer - Dene Percy
Where - Bristol Number Made PA -
Taking inspiration from the original road racing feed bag, (iL) Soigneur is a bag
company with a difference. From its base in Bristol we design and craft a range
of musettes using limited quantities of modern, colourful and patterned fabric
types. We produce musettes that stand out from the crowd, you won’t see lots of
the same bag on your rides and travels. Whether your need is for yourself, your
shop or promotion of an event, we can produce unique musettes to your exact
requirements.
07769 176566 ilsoigneur@ilsoigneur.com www.ilsoigneur.cc
STAND 61
INDEPENDENT FABRICATION
Maker - Designer Where - New Hampshire Number Made PA -
Independent Fabrication has been a pioneer in the manufacturing of custom bicycles
and bicycle frames since 1995. Today the IF team of artists and fabricators continue
to push the envelope by using the newest metal technologies and refining accepted
techniques. But even as production methods become more sophisticated with the use
of carbon fiber and titanium shotpeening, the IF team continues to make bikes by hand
and respects the craftsmanship of the old way. But they’ll never stop doing things their
own way. THAT’S INDEPENDENT FABRICATION
C/o Mosquito Bikes - 123 Essex Road - Islington - London - N1 2SN
www.ifbikes.com
STAND 45
JUST RIDING ALONG
Maker - Jon Web Designer Where - Sheffield Number Made PA -
We build custom bicycle wheels for commuting, racing or just riding along. We
make choosing your wheels easy, informative and helpful. Every wheel is expertly
built by hand in our workshop with the parts you have chosen to fit you and your
bike. Improvements in new materials and tubeless technology combined with the
application of tested hand building techniques ensure that our wheels are - and
stay - the best.
0114 2864900
info@justridingalong.com
www.justridingalong.com
LEGEND
STAND 03
STAND 64
MAWIS BICYLES
Head Framebuilder - Marco Bertoletti Designer - Marco Bertoletti
Where - Bergamo, Italy Number Made PA - 500
Maker - Mathias Scherer Designer - Mathias Scherer
Where - Germany Number Made PA - 35
1989 is when it all started. Sig. Marco Bertoletti started designing and developing
frames for some of the Europe’s most famous cycle brands. In 2009 Marco decided to
create the new brand “LEGEND by Bertoletti” into which he put all of his experience
& passion. LEGEND gives you the chance to visit the factory premises and see firsthand how your frame comes to life.
Bikes say a lot about yourself. Why then should a frame not be every bit as unique
as the human being riding it? That’s why I love and build custom frames. I don’t do
production runs. I build bespoke bikes, one by one, starting with design and the
geometry to fit you like a glove, continuing with a hacksaw, a file, a TIG welder, a
pipe bender and finishing everything off with an extensive manual finish and a bolt
on headbadge. If I had a say everybody would ride a custom bike.
Zetta Distribution Ltd - 77 Lammasmead - Broxbourne - Herts - EN10 6PG
0208 1333228 www.legendfactory.eu
LOOPWHEELS
STAND 57
mathias@mawis-bikes.com
www.mawis-bikes.com
STAND 22
MERÉNYI BICYCLES
Maker - Sam Pearce Designer - Sam Pearce
Where - Nottinghamshire Number Made PA -
Maker - Daniel Merényi Designer - Daniel Merényi
Where - Miskolc, Hungary Number Made PA - 40
Sometimes it’s good to reinvent the wheel . . . Loopwheels are 20” front and rear bicycle
wheels with integral suspension. They are designed and made in Nottinghamshire
by engineer and mountain-biker Sam Pearce, of Jelly Products Ltd. After 4 years of
development and testing, Sam is launching loopwheels at Bespoked 2013 and through
the crowd-funding site www.kickstarter.com. The 20” wheels offer suspension and
incredible comfort on a compact folding bike, plus an exciting new riding experience.
Urban commuting may never be the same again!
Merényi Bicycles is a small enterprise founded to build bicycles with a method fairly
unknown in Hungary. It is our objective to respect and try to meet the needs and
demands of the cyclists already in the process of frame building. In our choice of tubing
and technology, we are not bound by piled-up stocks. In the choice of paintwork and
ornamentation, there are no fixed designs enforced by executives, moreover, we know
and use more colours than red, blue and yellow. Each and every one of our frames is
unique, numbered and built for custom order. We believe that the birth of a bicycle is an
adventure we share with our customer.
Hollies Barn - Church Lane - Eakring - Newark - Nottinghamshire - NG22 0DH
01623 870128 / 07545825076 info@loopwheels.com www.loopwheels.com
MADE IN ENGLAND
STAND 08, 05
+36209993101
STAND 60
Maker - Designer Where - Number Made PA -
info@pushprojects.net
www.pushprojects.net
MANCHESTER CUSTOM CYCLES
STAND 15
Maker - Pete Wilson Designer - Pete Wilson
Where - Manchester Number Made PA - 12
It all began with a desire to have a tall bike. Since then I’ve been delving into the art
of frame building. I build traditional style frames, tall bikes, trailers and advertising
bikes. Recently I’ve been making retro steel CRMO stems and bars.
It’s great getting your hands dirty and making stuff.
www.manchestercustomcycles.co.uk
www.merenyi.eu
MIDDLEBURN CYCLE COMPONENTS
Maker - Designer Where - Number Made PA -
“Made In England – the artisans behind the hand-built bicycle”, takes you inside the
world of bespoke bicycle frame builders by showcasing the art, skills and methods of
some of the most interesting craftsmen in Britain today. The book showcases 13 artisans
behind the brands, through conversations the authors have had with the builders in
their workshops. Alongside these intimate discussions is some exquisite photography
of the frame builders and their working environment, contrasting the raw, rough
workshops with sleek images of the beautifully finished final products.
07986187462
ivan@merenyi.eu
Middleburn manufacture bicycle drivetrain components in the UK and have done
so for the past 20 years.
Unit 5 Bentley Park - Blacknest Industrial Estate - Blacknest - Alton - GU34 4PX
01420 520223 matthew@middleburn.co.uk www.middleburn.co.uk
MILLTAG
STAND 31
Milltag, created as a response to being unable to find a cycling jersey that was
either plastered with sponsors’ logos or simply indistinct from other generic cycle
wear. We produce high quality, technical cycle wear that are pieces of art whose
performance can be relied upon. We believe that cyclists should be proud to pull on
their jersey and we guarantee that you will ‘stand out from the peloton’.
ed@milltagcc.com
www.milltagcc.com
MOOTS
STAND 61
OAK CYCLES
STAND 34
Maker - Designer Where - Number Made PA -
Maker - Ryan McCaig Designer - Ryan McCaig
Where - London Number Made PA -
Moots, began building bikes in Steamboat Springs, Colorado in 1991 and for the last
nineteen years have remained solely focused on hand building the finest titanium
frames available. Each Moots frame is handbuilt with collective care by passionate
cyclists and craftspeople following a meticulous multi-step quality control process
throughout each stage of the building process. All the frames represent Moots very
best effort to build the perfect riding bike.
C/o Mosquito Bikes - 123 Essex Road - Islington - London - N1 2SN
020 7226 8765 mail@mosquito-bikes.co.uk www.mosquito-bikes.co.uk
Oak cycles is a workshop that specializes in the design, fabrication and repair of
custom steel bicycle frames. Every frame is a unique project. There are no stock
sizes; nothing comes “off the peg”. We focus on fit and geometry, and look forward
to collaborating with you on your design. Our bikes have toured the world, crossed
finish lines and stood up to long days on the courier circuit. We understand that a
bike is more than just transport, it’s a passion.
MOSQUITO BIKES
STAND 61
Maker - N/A Designer -N/A
Where - London Number Made PA
The Custom Bike Specialist’s. Pegoretti, Independent Fabrication, Zullo, Moots, Alchemy ,
Demon Frameworks, Cielo, Merenyi, Lynskey, . The finest collection of custom frame-builders
and specialist bike manufacturers you will find in any bike shop, coupled with the bikefitting expertise and experience needed to turn your bike dreams into reality. In addition to
our collection of unique bikes and frames we will also be showcasing other aspects of what
Mosquito has to offer:- Mosquito wheelbuilder Greg Conti will be building wheels throughout
the show and will be available to talk through the many wheel options available from
Mosquito. Special guests on the Mosquito stand will be Phil from cycling holiday company
‘More than 21 Bends’ (who will have cycled up from their base at the foot of Alpe d’Huez!)
and Remi Clemont from French clothing manufacturer Cafe du Cycliste launching their 2013
riding collection.
Mosquito Bikes - 123 Essex Road - Islington - London - N1 2SN
020 7226 8765 mail@mosquito-bikes.co.uk www.mosquito-bikes.co.uk
MOULTON BICYCLE COMPANY
STAND 50
07517890735
enquiries@oakcycles.com
www.oakcycles.com
OUTSIDE
ODONI
Maker - Odoni-Elwell Designer - Rhys John / Mike Fennessy
Where - Blackheath, West Midlands Number Made PA - Lots!
Odoni is a small British company doing great things with secure cycle storage and cycle
security products. Favouring a policy of keeping things local, all Odoni products are
manufactured in the UK from almost 100% British made parts. However these days we
go just a little beyond manufacturing and try to offer a little bit more; bespoke cycle
security products, spreading the cost through leasing, providing locks to accompany
our racks or even helping to develop policy and cycle advocacy, Odoni remains an
innovative light in the production of secure cycle storage systems.
Unit 5 - Excelsior Industrial Estate - Cakemore Road - Blackheath - West Midlands - B65 0QT
0121 561 5656
STAND 58
odoni@odoni.co.uk
www.odoni.co.uk
PAUL COMPONENT ENGINEERING
Maker - Designer - Dr Alex Moulton
Where - Bradford on Avon Number Made PA -
Maker - Paul Component Engineering Designer - Paul Component Engineering
Where - Chico, California USA Number Made PA -
Dr Alex Moulton pioneered the small wheeled bicycle revolution nearly 50 years
ago. All of today’s small wheeled cycles owe a debt of gratitude to the original
Moulton ‘F’ frame design which not only introduced and proved the concept of fullsize bicycles with small wheels, but also, right from launch in 1962, have utilised
front and rear suspension systems for improved comfort and performance. The
Moulton bicycle has been developed and refined constantly ever since and is held
in high regard throughout the world.
Holt Road - Bradford on Avon - Wiltshire - BA15 1AH
01225 865895 office@moultonbicycles.co.uk www.moultonbicycles.co.uk
For over twenty years we’ve been designing and manufacturing quality bicycle
components at our plant here in Chico, California. We hold every component to
exacting standards for performance, fit and finish. We’re proud of the parts we
make and stand by them. Our designs are driven by function, not appearances, and
we believe that the right components can make your ride just a little bit more fun
or interesting.
11204 Midway - Chico - CA 95928 - United States
(001) 530-345-4371 info@paulcomp.com www.paulcomp.com
NAGASAWA
STAND 09
Maker - Nagasawa Designer - Nagasawa
Where - Number Made PA Nagasawa is part of a small group of bicycle builders whose status borders on the legendary.
In the design of track bikes, what sets a Nagasawa apart is the way that his frames come
together, every detail meticulously positioned, every feature designed by the man himself
and refined over the years. The dropouts and lugs are Nagasawa designs, not stock pieces.
Nagasawa selects every tube based on your riding style and weight. He meticulously checks
his tubes out of the box from the factory checking for perfect profiles and minor defects. The
man is a true perfectionist.
4 Peter Street - London - W1F 0AD - UK
0207 734 1885 websales@tokyofixedgear.com www.tokyofixed.co.uk
STAND 48
PASSONI
Maker - Designer Where -Number Made PA -
Passoni is a niche luxury specialist Italian bicycle manufacturer. Formed in the early
eighties by Luciano Passoni, a man with a dream to build the best, most luxurious
and exclusive bikes in the world. Passoni’s are built in tiny numbers near Monza
in Italy with an emphasis on beauty and technological innovation. There are no
compromises in Passoni’s view of the world.
Represented by Cyclefit - 11 Macklin Street - Covent Garden - London
020 7430 0083 info@cyclefit.co.uk www.cyclefit.co.uk/passoni
PAUL HEWITT CYCLES LTD
STAND 42
Maker - Andy Robinson Designer - Paul Hewitt / Andy Robinson
Where - Leyland UK Number Made PA - 50 custom frames
Hewitt Cycles are a specialist cycle shop based in Lancashire UK. We are well known
for our custom wheel-building, bike-fitting and custom built bikes and frames. We
are planning to exhibit our full range of specialist products, a range of wheels. We
will also be exhibiting our range of cycles, our Cheviot & Cheviot SE touring cycles,
our custom top end steel & carbon road race bike our Fiera SC, we also plan on
exhibiting some interesting custom Audax, touring and race bikes.
01772 424773
info@hewittcycles.co.uk
CYCLES LIMITED
MTB
ROA D
TRI
CUSTOM FITTING & WIND TUNNEL TESTING SPECIALISTS
www.hewittcycles.co.uk
STAND 11
PAULUS QUIROS
Maker - Jonathon Paulus / Jose Quiros Designer - Jonathon Paulus / Jose Quiros
Where - Burry Port, Carmarthenshire Number Made PA - 25
We design and build handmade bespoke steel bicycles. All are one-off commissions;
they incorporate unique and distinctive design elements that are exclusive to Paulus
Quiros. Whatever type of bicycle we create for you, you can be assured that your bicycle
will receive the same meticulous attention to detail and precision craftsmanship as all
our bikes. Most importantly your bicycle will receive the engineering input necessary
to enable it to perform exactly to your requirements. Bicycle design is part artistry and
part engineering. We believe that beautiful design and elegant engineering solutions
are timeless.
Unit 15 - Dyfatty Park - Burry Port - Carmarthenshire - SA16 0FB
01554 228557 info@paulusquiros.co.uk www.paulusquiros.net
PEDALED
STAND 47
BAUM
Maker - Designer Where - Number Made PA -
“Go by bicycle. Feel the elements and contemplate nature.”
PEdALED makes clothes to enjoy on the bicycle. The poetic expression “pedalling to
dive into the earth” inspired the abbreviation “PEdALED”.
Sales & Marketing - Via V. Emanuele 11936050 - Pozzoleone - VI - Italy
sales@pedaled.com www.pedaled.com
PETERBART BICYCLES ATELIER
STAND 20
Maker - Peter Wozny/Bartek Wawrzynowicz Designer - Peter Wozny/Bartek Wawrzynowicz
Where - Bath Number Made PA -
The Petersbike started not as a business, but as a hobby. I have designed and built
bicycles with electric engines, which look like vintage, racing bikes. Besides, I renovate
old frames and compose modern, city bikes. Now I am going to Bath, where I will set up
a small bicycle studio with Bartek Wawrzynowicz. We will start to restore classic bikes.
Bartek said: We are an independent bicycle studio from Bath. PeterBart renowates and
redesigns to bring you a classic bicycle for the demands of your life. Each bike is tailored
to the individual, using premium parts. Reclaim frames to produce something unique
for every budget.
07849754123 / 07901368807 www.peterbartbicyclesatelier.com
peter.tomasz@yahoo.co.uk / bartekwawrzynowicz@googlemail.com
MOSAIC
M U S TA R D
PRESTIGE CYCLES
37A George St, Hove, East Sussex, BN3 3YB
MON: 9.30-5.30 TUES: 9.30-5.30 WED: 9.30-1.00 THURS: 9.30-5.30
FRI: 9.30-5.30 SAT: 9.30-5.00
T: 01273 960194 E: info@prestige-cycles.co.uk
W: prestige-cycles.co.uk
RACER ROSA
STAND 18
Maker - Antonio Taverna / Ferruccio Taverna Designer - Diego Lombardi (London)
Where - Padova, Italy Number Made PA - 100
In London we make custom built and made to measure classic steel bicycles. Our stylish
and minimal designs are a careful selection of the top quality materials produced and
manufactured in Europe. Our frames - in lightweight Columbus tubing - are hand-made
in Italy by Antonio and Ferruccio Taverna, a family business of master frame builders
since 1947. They still use the silver-fillet-brazing method (not brass). We make bicycles
for a diverse range of cyclists, from commuters to competitors. Every Racer Rosa bike is
a unique, bespoke project, beautiful and built to last a lifetime.
Studio 17 - Hiltongrove - Hatherley Mews - London - E17 4QP
020 8520 3023 hello@racerrosabicycles.co.uk www.racerrosabicycles.co.uk
REYNOLDS
STAND 54
Maker - Designer Where - Number Made PA -
Reynolds invented tube butting in 1898 – to reduce weight safely. This mechanical
engineering process is still used over 114 years later in lightweight bike frames.
Reynolds was the first to introduce 531, a highly alloyed steel in 1935, and the first
heat-treated steel (753) to the industry in 1976. Remaining innovative, we also use
3-2.5 and 6-4 titanium, hydroformed aluminium, air-hardening 631 and 853, and
maraging stainless steel (Reynolds 953 – currently the strongest tube-set available
to builders).
21 Shaftmoor Ind’l Estate - 226 Shaftmoor Lane - Hall Green - Birmingham B28 8SP
0121 777 3853
toptubes@reynoldstechnology.biz
ROBERTS CYCLES
reynoldstechnology.biz
Maker - Designer - Chas Roberts
Where - Croyden, London Number Made PA -
STAND 52A
Our aim is to build your perfect bicycle: a bicycle that’s unique, superbly efficient,
fits you precisely and is a delight to ride. Every Roberts is custom-fitted and made
by hand to increase your comfort, boost your performance and take you closer to
achieving your cycling ambitions. Whether you’re striving to get fit, get to work, get
onto the podium or get out and see the world, we can build the ideal bike for you.
89 Gloucester Road - Croydon - Surrey - CR0 2DN
020-8684 3370 robertscycles@tiscali.co.uk www.robertscycles.com
ROCK N ROAD
STAND 12
Maker - Designer Where - Number Made PA -
Our focus is on top quality steel, titanium and carbon bicycles, with our expertise
being in custom geometry and bespoke specification bike builds. We offer a cycle
fitting service that is second to none. Established for over 16 years, our excellent
reputation is built on providing the best knowledge, advice and service available,
not only in the southern area but nationwide.
1 Britannia Road - 1 Britannia Road - Southampton - SO14 5RG
02380 221 022 rocknroad@btconnect.com www.rocknroadcycles.co.uk
ROYCE UK LTD
Alchemy Bicycle - Best
Carbon Construction
NAHBS 2013
STAND 14
Maker - Cliff Polton Designer - Cliff Polton
Where - New Milton, Hampshire Number Made PA -
Royce UK Ltd was established in 1980 by Cliff Polton, a precision engineer. Royce Bottom
Bracket Axles are renowned for their combination of strength, stiffness and low weight.
They are machined from aerospace grade titanium and only top quality bearings are
use. Royce Hubs are virtually indestructible and are designed to be able to cope with
the toughest of conditions. They are supplied with all weather seals for durability.
Royce Bottom Bracket Axles, Front and Rear Hubs come with a lifetime guarantee for
the original purchaser. Royce components are used by cyclists at the highest level both
nationally and internationally.
Unit 13F - Queensway - Stem Lane - New Milton - Hampshire- BH25 5NN
01425 620062 cliff@royceuk.com www.royceuk.co.uk
RUSBY CYCLES
STAND 26
Mosquito Bikes
Maker -Jake Rusby Designer - Jake Rusby
Where - London Number Made PA - 5
123 Essex Road, Islington
London N1 2SN
tel: 020 7226 8765
mail@mosquito-bikes.co.uk
www.mosquito-bikes.co.uk
Rusby Cycles is a one-man operation that produces beautiful bespoke steel bike
frames out of a small workshop in Borough, London. Every frame is the result of a close
collaboration with the customer, high-end materials and hours of meticulous work. The
whole process from fitting, to fabricating and painting the frame, to building up the bike
with components can be taken care of in-house. This ensures that the quality of the work
is high and that the outcome is a totally unique, well-integrated bicycle that both rides
sweetly and looks stunning.
07894352508
The finest collection
of frame-builders
and bike
manufacturers
available:
Independent
Fabrication,
Moots, Alchemy,
Zullo, Pegoretti,
Lynskey, Demon
Frameworks, Cielo,
Kuota, Look, Soma,
Surly, Kinesis.
98 Webber Street - London - SE1 0QL
rusbycycles@gmail.com www.rusbycycles.co.uk
SAFFRON FRAMEWORKS
STAND 05
Maker - Matthew Sowter Designer - Matthew Sowter
Where - London Number Made PA -
At Saffron Frameworks, we create beautiful and functional bicycles by understanding
first, who you are and what you want from your bicycle. We design frames which fit your
cycling goals and your geometry. And we turn that into an aesthetically attractive frame.
We believe in turning your ideas into designs, and those designs into truly awesome
bicycles, making you the perfect traveling partner on two wheels. Primarily we built with
steel but throw a bit of carbon into the mix from time to time. Each one of our frames is
unique, made with our own hands.
98 Webber Street - Southwark - London - SE1 0QL
07986187462 matthew@saffronframeworks.com www.saffronframeworks.com
SCHWALBE TYRES LTD
STAND 29
Maker - Designer Where - Massachusetts Number Made PA -
Schwalbe is a family owned company with forty years of design and manufacturing
expertise. Famous for our Marathon touring tyres, in recent years our range has
expanded into high end mountain bike race tyres and now also top level road race
tyres with the Ultremo ZX and the tubular Ultremo HT version. Come and see our
2012 range of tyres that will make your bike look and perform to this best of its
ability.
Schwalbe Centre - Hortonwood 30 - Telford - Shropshire - TF1 7ET
www.schwalbe.co.uk
Professional Bike Fitting, Design and Custom Build Experts.
(YHQWB0DU[PPBYLQGG
SEVEN CYCLES
STAND 48
Seven Cycles are the legendary bespoke builders of steel, titanium, Ti/carbon and
carbon frames for road, mountain, cyclocross, urban and utility riders. In their
fifteen year history, Seven has turned out 25,000 frames, each one built one-at-atime, by-hand in their Massachusetts factory.
Represented by Cyclefit - 11 Macklin Street - Covent Garden - London
020 7430 0083 info@cyclefit.co.uk www.cyclefit.co.uk/seven-cycles
STAND 01
SHAND CYCLES
SLATE CYCLES
STAND 38
Maker - Designer Where - Massachusetts Number Made PA -
Maker - Christy Boothroyd Designer - Christy Boothroyd
Where - Gwynedd, North Wales Number Made PA -
Artisan steel-frame bicycles from the heart of Snowdonia. Precision, elegance and
economy of design are themes that run innate through the work of silversmith
turned framebuilder and Slate Cycles founder, Christy Boothroyd. These qualities,
combined with an uncompromising bespoke approach to framebuiding, form the
underlying ethos that defines Slate Cycles.
Ty Newydd - Dinorwig - Caernarfon - Gwynedd - LL55 3ES
07896705258 christyboothroyd@gmail.com www.slatecycles.co.uk
STAND 13
Maker - Steven Shand & Russell Stout Designer - Steven Shand & Russell Stout
Where - Livingston, Scotland Number Made PA - 120
STRADA HANDBUILT WHEELS
Maker - Designer Where - Lancing, West Sussex Number Made PA -
Shand is an independent bicycle manufacturer located in central Scotland
producing steel frames inspired by Scotland’s roads, trails and mountains. Founded
by Steven Shand in 2003, the company offers a range of hand-built steel production
bikes, all made with the same passion and attention to detail as our custom frames.
Strada Hand Built Wheels was launched in 2010 to reintroduce the benefits of hand
built wheels to cyclists who may not have considered them before. After the frame,
the wheel of your bike is the most critical component in how it rides and handles
so we consider your weight, height, physique, power, type of bike and type of road
surface before selecting a rim, hub and spokes to build a wheelset to match you
perfectly. All wheels built to 0.05mm true with a lifetime free truing policy.
3b Nasmyth Court - Houston Industrial Estate - Livingston - EH54 5EG
01506 668966 info@shandcycles.com Web - www.shandcycles.com
Suite 9 - Brooklands House - Marlborough Rd - Lancing Business Park - BN15 8AF
01903 750040 info@stradawheels.co.uk www.stradawheels.co.uk
SHUTT VELO RAPIDE
STAND 59
STAND 07
SWALLOW
Maker - Designer Where - Oxfordshire Number Made PA -
Maker - Peter Bird/Robert Wade Designer - Peter Bird/Robert Wade
Where - Jackfield, Ironbridge Gorge, England Number Made PA - 20
Founded in 2009 Shutt Velo Rapide’s mission is simple; to create their own unique
brand of well designed, great fitting, quality cycling garments that do not cost a
fortune. By designing all our products in the UK, sourcing our materials as local as
possible then manufacturing in Leicester, we have the privilege of being personally
involved in every aspect of production.
Since 1981, Swallow has hand-built only bespoke frames for discerning clients around
the World. Each Swallow frame is unique to match the owner’s size, needs and style.
You will speak with the person that will design and build your frame during a detailed
consultation, using a Calfee sizing jig and BikeCAD Pro. We use Reynolds 953, Columbus
and other selected stainless and steel tubing with fillet brazing or hand-cut lugs to
achieve exactly the bicycle or tandem you desire. Adventurous clients can build their
own frames with one-to-one tuition on our frame-building courses.
01280 847271
info@shuttvr.com
www.shuttvr.com
SOUPLESSE
STAND 32
Maker - Various Designer - Richard Chapman
Where - Africa & London Number Made PA - 25
Souplesse Bikes have been created to offer the smoothest riding, most beautiful
bamboo bikes in the World. They are a combination of UK design, engineering
and testing and a partnership with the best bamboo bike craftsman in Africa, who
was apprenticed to the worldwide father of bamboo bikes, Craig Calfee of Calfee
Designs. We offer frame only or complete builds with the ability to even specify the
wrapping colour of the joints. Racing bikes, Singlespeed, Mountain Bikes, 29”, Track.
Richard@zamboobikes.com www.zamboobikes.com
Bicycles by Design - Fusion - Church Road - Jackfield - Shropshire - TF8 7AP
01952 459900 info@bicycles-by-design.co.uk www.bicycles-by-design.co.uk
STAND 64
SWRVE
Maker - Designer Where - Number Made PA -
Swrve makes stylish urban cycling apparel. Our design concept has always been
clean and simple lines.
Form follows function, a dash of elegance and a dash of street.
info@swrve.co.uk
www.swrve.co.uk
SWORD CYCLES
STAND 37
STAND 09
TONIC FABRICATION
Maker - Tim Leicester Designer - Tim Leicester
Where - Derbyshire, England Number Made PA - TBC
Maker - Landon and Tony Designer - Landon and Tony
Where - Number Made PA -
Sword Cycles is a new custom framebuilding company, based in Derbyshire.
Framebuilder Tim Leicester has nearly a decade of professional framebuilding
experience and individually hand makes each steel frame. Sword Cycles builds both
beautifully functional fillet brazed and classically beautiful lugged frames, to suit
your frame type and your own tastes. Your intended use, riding style and physique
are matched to a personalised tube selection and custom geometry to produce
your ideal bespoke frame. To discover more visit the website.
07980552379 tim@swordcycles.co.uk www.swordcycles.co.uk
Everything from Tonic Fabrication is hand made in house by the two man team Landon &
Tony. This allows them the flexibility to construct some of the toughest, smoothest and most
rugged frames we’ve seen in years. Shying away from fancy features and pointless brazing,
the technical side of Tonic bikes really shines through; their attention to frame design, their
signature head tube stack, the use of BB30 in their cross models and the wishbone stays are
subtle nods for those in the know. When all these features come together you get something
unique, understated and very special.
STAND 21
TED JAMES DESIGN
0207 734 1885
4 Peter Street - London - W1F 0AD - UK
websales@tokyofixedgear.com www.tokyofixed.co.uk
TRYKIT
STAND 51
Maker - Ted James Designer - Ted James
Where - London Number Made PA - Not many, soon to be much more
Maker - Geoffrey Booker Designer - Geoffrey Booker
Where - Thame Oxfordshire Number Made PA -
Ted James Design is a new company started by myself, Ted James - rider, designer,
builder. I’ve only been building frames for three years, but have been thinking about it
for nearly 30. I come from a mountain bike and BMX background and have always been
interested in the development of the design technology, which lead me to design a
fixed gear trick frame and components in collaboration with 14 Bike Co. All my work is
manufactured in the UK. Everyday work is frame renovations and repairs, custom builds,
prototyping and riding.
Trykit Conversions is a one man opperation. I produce top class touring and racing
tricycles, tandem tricycles, mainly from the range Reynolds tubing, and conversion
axles. All are two wheel drive with a special cassette body, designed for tricycles
only and made in house. I will be displaying a tandem tricycle, a racing tricycle and
a conversion axle, along with various associated parts that are designed and made
by me for tricycles.
TITCHMARSH CYCLES
STAND 52B
The Old Truman Brewery - 91 Brick Lane - London - E1 6QL
info@tedjamesdesign.com www.tedjamesdesign.com
STAND 25
Titchmarsh Cycles builds functionally and aesthetically exquisite bespoke cycle
frames for the discerning cyclist. Each bicycle is tailored to suit the needs of the
rider and fit perfectly for an enhanced experience. I’ve had a lifelong passion for my
craft and coming from an aerospace and motorsport frame building background, I
can build in steel, titanium and stainless and weld with TIG and gas. I’m based near
York and offer a personalized, friendly service.
dan@titchmarshcycles.com
www.titchmarshcycles.com
TOKYO FIXED
VELO CAFE MAGASIN
Maker - N/A Designer Where - N/A Number Made PA -
Maker - Dan Titchmarsh Designer - Dan Titchmarsh
Where - York Number Made PA - 15
07851058146
Fairmead - School Lane - Tiddington - Thame - Oxfordshir - OX9 2NE
01844 339451 trykit@tiscali.co.uk www.trykit.com
STAND 09
Velo Café Magasin is a small bike shop based in Belfast, Northern Ireland. We began
fixing and restoring old bikes of all sorts. We then expanded into building custom
wheels, and now have a small studio where we stock a wide range of components
and accessories. Our flagship brands include Parlee, Independent Fabrication,
Firefly, Lightweight, Campagnolo and Rotor. Custom wheels can be built using
Chris King, Velocity, Ambrosio, IRD and more.
Bicycle Studio - 19-21 Ormeau Avenue - Belfast - BT2 8HD
02890 231704 info@velocafemagasin.com www.velocafemagasin.com
STAND 46
VILLIERS-VELO
Maker - Designer Where - Number Made PA -
Maker - Paul Villiers Designer - Paul Villiers
Where - Kent Number Made PA -
Tokyo Fixed started as a web only shop in Tokyo, 2006. We opened our shop front
in the heart of London’s Soho in November 2009. We choose products from all
over the world. We choose clothing not only for cycling but for cycling people. We
look for small quality brands who have a passion for both style and function. The
same goes for the cycle and cycle accessories brands we stock. We also specialise in
building custom bikes of any style and making people’s bicycle ideas come to life.
4 Peter Street - London - W1F 0AD
0207 734 1885 websales@tokyofixedgear.com www.tokyofixedgear.com
Every Villiers-Velo bicycle is built around a custom sized frame, the traditional way
using only the finest steel tubing and framebuilding materials from Reynolds,
Dedacciai & Columbus then fitted out with the best components from the likes of
Campagnolo, Rohloff & Shimano.
Unit 16 - Pier Approach - Gillingham - Kent - ME7 1RP
01634 577427 paul@villiers-velo.co.uk www.villiers-velo.co.uk
VULPINE
STAND 53
Maker - Designer Where - Number Made PA -
Vulpine are a British design-obsessed apparel company who launched in 2012. We
make high-end clothing from performance materials that is stylish both on and
off the bike, strongly influenced by British tailoring. We have a nice blog talking
about all things cycling. Our ethos is creative and inclusive and passionate. We also
organise the Vulpine Cycling Fete.
Come take a comfy seat with us and have a chat. We will have treats.
Unit 5 Brook Willow Farm - Woodlands Road - Leatherhead -Surrey - KT22 0AN
0203 151 4100 info@vulpine.cc www.vulpine.cc
WINTER BICYCLES
STAND 35
BespokedBRISTOL
NewBuilders2013
STAND 41B
Maker - Eric Estlund Designer - Eric Estlund
Where - Springfield, Oregon, United States Number Made PA -
Winter Bicycles manufactures custom bicycles and luxurious necessities including forks,
stems, racks and other fittings. All products are individually tailored for the customer’s
needs by Eric Estlund in Eugene, Oregon. Winter Bicycles carry a sense of year round
versatility with an emphasis on fresh, clean design, practical features and subtle detailing.
Eric will work with you to incorporate the design and features relevant for your uses and
priorities, from performance race bikes to everyday city bikes and commuters. Our goal
is to put you on the best fitting and performing bicycle for your specific needs.
001 541.556.5156
info@winterbicycles.com
BOOCYCLES
Maker - Henry James Designer - Henry James
Where - Number Made PA -
Having a passion for using natural materials, working as a bicycle mechanic and a love
of cycling, has led me to making Boocycles. Bamboo bikes are becoming increasingly
popular. The others that I have seen are only frames partially consisting of bamboo.
Therefore each time I begin making I set out to make more of the bike from bamboo
than previously. In addition I am not just making the bikes for show, but comparable to
other, far more tried and tested materials, in an effort to make the most environmentally
friendly mode of transport.
www.winterbicycles.com
call for entries
Bespoked
The UK Handmade Bicycle Show
Spring 2014
Email 2014@bespoked.cc to register
STAND F
BTR FABRICATIONS
Maker - Tam Hamilton & Paul Burford Designer - Tam Hamilton & Paul Burford
Where - In the shed, East Preston, West Sussex Number Made PA - 10 - 20
Burf and Tam Racing (that’s BTR) is the creation of bike geeks Burf - who loves making
stuff, and Tam - who loves designing stuff. Together they make a formidable pair in the
world of innovative bike design and building. It’s become our mission to create good
honest bicycle frames for people that couldn’t care less about the hype, but who just love
to ride their bike fast, because that’s what we like to do. We are also currently working on
a few new ideas that will change the way you think about your bike, so keep ‘em peeled!
49 Somerset Road - East Preston - Littlehampton - West Sussex - BN16 1BY
07843 841 796 btrfabrications@gmail.com www.btr-fabrications.com
STAND D
DMO FRAMEWORKS
Maker - Olly Webb Designer - Ollly Webb
Where - Chippenham Wiltshire Number Made PA A genuine, grass-roots family affair! DMO stands for ‘Dennis Michael Oliver’, Dennis is Oliver’s
Granddad (a retired fabricator and sheet metal worker from Jaguar), Michael is Oliver’s Dad
(a retired engineer from BMW) and Oliver is, well, the guy who sticks all the bits together!
The frames are manufactured in Olly’s workshop in Chippenham Wiltshire (his own words)
“I say workshop – it’s a brick built 8’x6’ shed I like to call a workshop”). Olly’s target is to
make 10 frames a year, initially focusing on completely bespoke (no lugs or pre-bent, off the
shelf tubing) 29’er mountain bike frames aimed at mountain bikers interested in extending
those single day rides into Bike Packing adventures! For the uninitiated, Bike Packing entails
strapping all your kit onto a bike for one, two or more nights out in the wilderness!
dmoframeworks@gmail.com dmoframeworks.blogspot.co.uk
ERA CYCLES
STAND B
Maker - Ped Baker Designer - Ped Baker
Where - Stamford, Lincolnshire Number Made PA - <5
Pushbikes for petrolheads. Designs inspired by classic engineering and
motorsport icons. Using techniques learnt on both sides of the Atlantic, ERA Cycles
produce bespoke steel bikes that seamlessly blend together two disparate but
complementary worlds.
IRONWORKS
STAND H
Maker - Michael Rushton Designer - Michael Rushton
Where - South Ribble, Lancashire, England Number Made PA - 3
Focusing on obscure, fillet brazed steel off road contraptions - Ultra compact 29ers,
minimalist cyclocross, E-stays, curved tubes, custom cut dropouts and special
needs.
ironworksframes@gmail.com
STAND a
LIBERTINE BICYCLES
LL
Maker - Phil Taylor Designer - Phil Taylor
Where - Stroud, Gloucestershire Number Made PA - 12 (1 a month)
Custom Bicycles handmade in the Slad Valley, Stroud.
It’s All About the Bike: the Pursuit of Happiness
on Two Wheels by Robert Penn is published by
Penguin. A Sunday Times bestseller in the UK,
it’s been translated into nine languages.
‘A book as brilliant as the invention it celebrates. A
wonderful read.’ Nick Crane
Libertine Bicycles
Stroud - Gloucestershire
phil@libertinebicycles.co.uk www.libertinebicycles.co.uk
OYSTER BIKES
STAND A
Maker - Stuart Risby Designer - Stuart Risby
Where - Southampton Number Made PA -
Oyster Bikes designs and builds bespoke suspension and hardtail mountain bikes.
The suspension bikes feature a simple single pivot frame with a distinctive drive
design. All frames are constructed in steel and T.I.G. welded. Bikes are either single
speed or gearbox driven, resulting in simplicity and low maintenance. Each bike is
developed with the client to ensure that their Oyster is tailored to their needs, from
frame geometry and tube selection to fittings and colour.
stu@oysterbikes.com
www.oysterbikes.com
‘Gem of a book.’ The Economist
‘Artfully, Penn turns his quest for new hardware...
into a worldwide spin around cycling and its
culture.’ William Fotheringham, Guardian Review
‘It is difficult not to be swept along by Penn’s
enthusiasm... He writes with authority, humour
and refreshing candour.’ Charles Starmer-Smith,
Sunday Telegraph.
‘A rare and precious portal to the heart and soul of
bike culture,’ Atlantic
‘A joyful book,’ The Scotsman
RENWICK BICYCLES
STAND I
Maker - Matthew McDonald Designer - Matthew McDonald
Where - Penzance, Cornwall Number Made PA -
Renwick. Custom steel bicycles.
Cargo, freight or utility bikes for errands, the school run and shopping. Any excuse for a
bike ride, all week long.
07971245346
skamphound@hotmail.com
SVEN CYCLES
STAND 41A
Maker - Darron Coppin Designer - Darron Coppin
Where - Number Made PA -
Darron Sven Coppin has been building and repairing vintage race cars and
motorcycles for many years and in 2012 returned to his first love, bicycles, setting
up Sven Cycles in Weymouth Dorset. Building lightweight road and track bikes he
has recently been collaborating with Mog Mogford (ex Brixton Cycles) to build
classically styled hub geared roadsters with a modern twist. Also offers bike fitting
service and frame repairs/renovation.
darron@svencycles.com
www.svencycles.com
TEAGUE BICYCLES
STAND G
Maker - Matt Teague Designer - Matt Teague
Where - London Number Made PA - 6
Matt Teague started building bicycles in 2011 in east London, mostly for friends and
family and mostly because he was unable to find exactly what he wanted for everyday
use in and around London. He believes that bicycles are the ultimate personal transport
solution for medium and short distances (and long ones too – time permitting) and
seeks to build machines that will soak up the rigours of daily life on the road. Frames
are built in a variety of techniques, but lugged steel predominates because it is strong,
lightweight and timeless.
teaguebicycles@gmail.com
WOODELO
STAND C
Maker - Liam Murray and Daniel Murray Designer - Liam Murray
Where - Tipperary, Ireland Number Made PA -
Woodelo is a new company with the aim of producing high performance wooden
bicycle frames. We take traditional materials and craftsmanship, source everything as
locally as possible, then combine with modern design and manufacturing techniques to
produce frames of natural beauty and unique ride comfort. All frames are made to order,
we do of course have our stock geometry but you can also have a wooden frame made
to your individual geometry and specifications. We can even show you a picture of the
tree it came from!
Unit 2 Drangan Enterprise Units - Drangan - Thurlas - Tipperary - Ireland
liam@woodelo.ie www.woodelo.ie