A Template for the Creation of a Full Paper Submission to the EG-ICE Workshop Abstract Keywords: 1 Introduction 2.2 Structuring the document 2.2.1 Levels 2 General Layout 2.1 Page layout Beetz et al. 2015, A Template for the EG-ICE workshop 2015 2.2.2 Body Text 2.3 Fonts and emphasis “DejaVu Sans Monospace” 3 Figures, tables and formulas Figures are preferably inserted in the document as vector graphics Raster images should have a resolution high enough to allow printing and zooming Figure 1 Illustrations supporting the text should be inserted as vector graphics. Where this is not possible, high resolutions of raster images suitable for printing should be included. They should either fit a single column or span the whole width of the inner margins Figure 1 3.1 Figures Proc. of the 22nd EG-ICE workshop 2015, July 13th-16th 2015, Eindhoven, The Netherlands Beetz et al. 2015, A Template for the EG-ICE workshop 2015 (1) (𝑥 + 𝑎)𝑛 = ∑ 𝑛 (𝑛𝑘)𝑥 𝑘 𝑎𝑛−𝑘 𝑘=0 3.4 Listings Listing 1 Showing a pseudo-code snippet of Dijkstra’s algorithm 3.2 Tables 1 2 3 4 5 6 S = a sequence g = goal while prev[g] is available: insert g at the start of S g = prev[g] end while Table 1 A table demonstrating the use of tables Listing 1 4 References Table 1 3.3 Formulas 𝑏2 = 𝑐 2 𝑎2 + Proc. of the 22nd EG-ICE workshop 2015, July 13th-16th 2015, Eindhoven, The Netherlands Beetz et al. 2015, A Template for the EG-ICE workshop 2015 Acknowledgements References Proc. of the 22nd EG-ICE workshop 2015, July 13th-16th 2015, Eindhoven, The Netherlands
© Copyright 2024