1. No category

2200 CHOKE POSITION
INDICATOR SYSTEM
DATA SHEET
APPLICATION
The HDI 2200 Choke Position Indicator System is an intrinsically safe, certified, solid-state electronic choke position indicator used to monitor the
choke position in 1% increments from 0% to 100%. Found most commonly within the HDI 9000 Choke Console System, the HDI 2200 can adapt to
a variety of chokes found within the oil and gas industry using a linear potentiometer, rotary potentiometer, or retractable potentiometer. The HDI 2200
eliminates the need for air lines to the position indicator. All HDI Gauges provide safety, accuracy, reliability, and low maintenance for the user.
FEATURES
OPTIONS
• Battery powered
• 4-20mA output (additional barrier required)
• Field repairable system
• 4-20mA input (additional barrier required)
• Low battery indicator
• 0-1 volt output
• Interfaces with linear, rotary, or retractable potentiometers
• Externally powered, 12VDC or 24VDC required
• Replaces pneumatically controlled units
• Dual sensors available for HMI/PLC integration
(non-certified option)
• Backlight, 12VDC or 24VDC required (non-certified option)
• Solid state display
• Analog bar graph w/ divided scale
• Simple interface for calibration
CERTIFICATIONS
• CSA: Intrinsically Safe Class 1, Division 1, Groups A, B, C and D
• ATEX: optional,
II 1 G, Ex ia IIC T4
SAFETY
PRECISION
INNOVATION
WELL CONTROL MONITORING AT ITS FINEST
2200 CHOKE POSITION INDICATOR SYSTEM
DATA SHEET
DIMENSIONS
SPECIFICATIONS
• Weight: 5 lbs (as shown gauge display only)
All dimensions given are in inches and [millimeters] unless
• Case Material: Stainless steel
otherwise noted.
• Resolution: 1% increments
• Power: HDI E260 Battery Pack, 1 year life span
• Media (Process) Temperature: -40 to 75 celsius
• Display: 3 digit digital display, 0-100% and 1/8” scale, linear analog
bar graph, low battery indicator
• Viewing Angle: 45 degrees
• Viewing Distance: 30 feet
HDI
• Electronics Protection: Gasket seal
M
• Sensor Housing: Linear potentiometer, rotary potentiometer, or
retractable potentiometer
100
95
90
85
80
75
70
65
60
55
E
50
45
40
35
30
25
20
15
10
5
0
RUN
POWER
www.hdigauges.com
HDI
M
100
95
90
85
80
75
70
65
60
55
E
50
45
40
35
30
25
20
15
10
5
0
RUN
POWER
www.hdigauges.com
Specifications subject to change without notice. HDI Instruments, LLC is a registered ISO 9001:2008 company.
Copyright 2015 HDI Instruments, LLC
HDI Instruments, LLC, 4130 Directors Row, Houston, TX 77092 USA
Phone: 713-688-8555 | Fax: 713-688-2228 | Contact Email: info@hdigauges.com | Website: www.hdigauges.com
SAFETY
PRECISION
INNOVATION
WELL CONTROL MONITORING AT ITS FINEST