Contents - MyMEDTOX Help Page
ePad Instructions Contents Who Can Use eChain? ............................................................................................................................................................. 2 Training.................................................................................................................................................................................... 2 Customer Service .................................................................................................................................................................... 2 Usernames and Passwords ..................................................................................................................................................... 2 System Requirements ............................................................................................................................................................. 2 System Requirements: Websites ............................................................................................................................................ 3 ePad Datasheet Information ................................................................................................................................................... 3 Installing an ePad .................................................................................................................................................................... 4 Step 1 - ePad Setup ................................................................................................................................................................. 4 Step 2 - Installing Device Drivers ............................................................................................................................................. 5 Step 3 - Installing PC Signing Applications .............................................................................................................................. 8 Step 4 - Internet Settings ...................................................................................................................................................... 13 Step 6 - Validating ePad Setup .............................................................................................................................................. 14 Current Users ........................................................................................................................................................................ 15 Verify You Have the Correct Version of ePad Software .................................................................................................... 15 Uninstalling ePad Software ............................................................................................................................................... 15 ePad Return Form ................................................................................................................................................................. 16 Page 1 of 16 Who Can Use eChain? eChain can be used for all Non DOT accounts. If an account number needs to be added to your access email a request to mtxechain@labcorp.com or call 888-324-2468. Training Ask an eChain representative for a PowerPoint presentation you can use to train your staff. Customer Service The MedTox eChain team is available Monday through Friday from 7:30AM-5:30PM central via email at mtxechain@labcorp.com or phone 888-324-2468. Usernames and Passwords A username and password is required to access eChain. Email mtxechain@labcorp.com or call 888-324-2468 to request a setup form. Once a username and password has been established, access www.medtox.com and click on My MEDTOX at the top of the screen, which will bring you to the eChain login page. System Requirements ECHAIN SYSTEM REQUIREMENTS MINIMUM RECOMMENDED Windows XP OS Windows 7 or higher Pentium-class 1GHz PC Pentium class 1.0 GHz or faster 1GB RAM Memory 2GB RAM 15" Color Monitor 17" Color High Color (16 bit) 800x600 Colors True Color (32 bit) Resolution 1024x768 or higher Cable, DSL, LAN Modem - - Internet DSL, Broadband, or faster Microsoft Internet Explorer 8.0, 32-bit Adobe Acrobat Reader 9.0 or Microsoft Internet Explorer 9 or higher, 32-bit Browser Adobe Acrobat Reader 11.0 Adobe Acrobat 9.0 Page 2 of 16 System Requirements: Websites In order to take full advantage of all features of eChain you must use a computer which has been configured to allow access to the web sites below. Try clicking on the links below to see if your computer is properly configured. http://medtox.com http://bing.com http://discoverbing.com http://microsoft.com http://virtualearth.net (Redirects to http://www.bing.com/maps/) http://maps.live.com (Redirects to http://www.bing.com/maps/) If a non-error web page opens for each site, you are all set! If an error page appeared, check with your IT department and request that they allow you to access all of the domains below. If any of these domains are blocked, MyMedtox will not function correctly. Methods to allow access to these sites varies depending on the tool used to control access. Let your IT department know it may be necessary to specify http and https for each site and/or include wildcards to specify all parts of the domain (i.e. *medtox.com). medtox.com ajax.microsoft.com bing.com virtualearth.net support.discoverbing.com maps.live.com ePad Datasheet Information ePad-ink is ePadLink’s most widely-deployed electronic signature capture device with users across dozens of industries and application environments. With an LCD screen that lights up when an esignature is applied or affirmation text displayed, the interactive visual feedback provides an enhanced user experience. Ergonomic, portable, and bundled with IntegriSign® Desktop for esigning Microsoft Word, Excel, and Adobe Acrobat documents, ePad-ink is a best-in-class e-signature solution for any environment. Key Features: LCD Screen Displays affirmation text for greater signing context Assigns a unique serial ID number to the host computer Bundled with IntegriSign Desktop Software Offers plug-ins for Microsoft Word, Excel, and Adobe Acrobat Produces legally-binding e-signatures Powered by USB port Page 3 of 16 Installing an ePad 1. eChain is not currently being tested with Windows 8. You may experience challenges with the display within the application when using eChain with Windows 8. 2. These instructions cover the Desktop version of Internet Explorer only. 3. You must have administrator rights to run the installation program. 4. Save all your work before starting the installation. 5. You will need to install both the ePad Drivers and the ActiveX Drivers. 6. Internet Explorer version 11 (the version that is provided with Windows 8.1) may render the eChain and QuikResults web applications differently. While the appearance may differ, the functionality will remain the same. Step 1 - ePad Setup 1. Turn off the computer. 2. Plug in the ePad to the USB Port. 3. Turn on the computer and allow Windows to boot up. 4. Before beginning the installation process, be sure that a Google and/or Yahoo tool bar are not open on the Internet Explorer web browser. If one is open, right click on the toolbar and make sure that both toolbars are not checked to be open. Page 4 of 16 Step 2 - Installing Device Drivers 1. Access www.epadsupport.com. 2. The ePad Support page will show download links for both the Universal Installer and the IntegriSign Desktop. 3. Select the "download" link for the Universal Installer. You will be prompted at the bottom of the browser window to run or save this file. Select Run. 4. If you have an earlier version of ePad installed, you may receive a prompt to upgrade it. Click Yes to proceed. If you see a prompt that says “Do you want to allow the following program to make changes to this computer?” Click Yes. 5. You may get one of the following messages a. This setup will perform an upgrade of ePadLink ePad XX.X. Do you want to Continue? Click Yes. b. The publisher could not be verified. Are you sure you want to run this software? Click Run. Page 5 of 16 6. An InstallShield Wizard for ePad screen starts. You should see a screen similar to the following. Click Next. 7. If updating from a previous version, the install should initiate. If this is a new install, the wizard will continue with the license agreement screen. Select I accept the terms of the license agreement and click Next. Page 6 of 16 8. Enter the User Name and the Company Name and click Next. 9. Do not change any options on this screen and click Next. Page 7 of 16 10. NOTE: You may see a warning that says The Microsoft .NET Framework could not be found. You may safely ignore this warning and click OK. 11. On the Ready to Install screen, click the Install button and the software will install. 12. Close the wizard when it is completed by clicking Finish. Step 3 - Installing PC Signing Applications 1. Access www.epadsupport.com. 2. The ePad Support page will show download links for both the Universal Installer and the IntegriSign Desktop. 3. Select the "download" link for the IntegriSign Desktop. You will be prompted at the bottom of the browser window to Run or Save this file. Select Run. Page 8 of 16 4. If you have an earlier version of ePad installed, you may receive a prompt to upgrade it. Click Yes to proceed. 5. You may get asked after pressing Run for rights to run the file on your machine. Allow the install to continue. 6. You may get one of the following messages a. This setup will perform an upgrade of ePadLink ePad Do you Want to Continue? Click Yes. b. The publisher could not be verified. Are you sure you want to run this software? Click Run. 7. The IntegriSign Desktop installation will appear. Click Next: Page 9 of 16 8. If updating from a previous version, the install should initiate. If this is a new install, the wizard will continue with the license agreement screen. You should accept the licensing agreement and continue. a You may be prompted about installing the Visual C++ Redistributable Package. Click OK. 9. Enter the User Name and Company Name and click Next. Page 10 of 16 10. Do not make any changes to this screen and click Next. 11. Do not make any changes to this screen and click Next. Page 11 of 16 12. Do not make any changes to this screen and click Next. 13. Wait for the installation to complete. Once it is completed, it may prompt you to restart your computer. You can choose to restart now or later, you should restart your computer now. 14. Click Finish to complete the installation. Page 12 of 16 Step 4 - Internet Settings 1. Internet browser settings must be updated to make them compatible with the ePad. 2. Open Internet Explorer. 3. Click Tools, Internet Options and then click on the Security tab. 4. Select the Trusted sites zone. 5. Make sure that the “Enable Protected Mode” checkbox is NOT CHECKED. Then click the Sites button. Page 13 of 16 6. Access https://my.medtox.com and click Add. The website now appears in the Websites window. 7. Click Close, and then click OK. Step 6 - Validating ePad Setup To ensure that the ePad has been installed properly, follow these steps. 1. Click Start, All Programs, IntegriSign Desktop, Desktop, Pen Diagnostics 2. A dialog box will appear titled Pen Diagnostics. Within the dialog box it will say ePad device initialized properly. Start Signing. This means that the installation went through successfully. 3. If it gives you other options, go to Pen Calibration in order to calibrate the pen. This will only take a moment. Page 14 of 16 Current Users Old software can cause the ePad to not function properly. To verify you are running the most current version of the ePad Software follow these steps. Verify You Have the Correct Version of ePad Software 1. 2. 3. 4. 5. 6. 7. Click in your Start menu. Click on All Programs. Click on IntegriSign Desktop. Click on Desktop. Click on About IntegriSign. The latest version of the ePad drivers for Windows XP, Windows 7 and Vista is 10.4. If your drivers are lower than these numbers you will need to uninstall IntegriSign Desktop and Interlink Electronics and then reinstall the most current version of the drivers. Uninstalling ePad Software 1. 2. 3. 4. 5. Click on your Start menu. Click on Control Panel. Click on Add or Remove Programs (this may be worded differently). Scroll until you find IntegriSign Desktop and Interlink Electronics and click Remove or Uninstall. Wait for the process to complete and restart your computer. Page 15 of 16 ePad Return Form 1. If you need to return an ePad to MedTox package the ePad or laptop in a well-padded cardboard box (Attention: eChain Dept.) 2. Use a FedEx Billable stamp/airbill 3. Call FedEx for a pickup (800-463-3339) touch 0, 0, attendant will pick up, request from the attendant “an Express pick-up for a return shipment using a billable stamp” 4. Fax this form to 855-463-4621 and also send it in the package with the laptop and/or ePad Collection Site Name ________________________________________________________________________ Address __________________________________________________________________________________ Phone ____________________________________________________________________________________ Fax ______________________________________________________________________________________ Contact ___________________________________________________________________________________ Reason for return __________________________________________________________________________ MedTox asset number(s) from all products you are returning _______________________________________ Do you need replacement equipment? Yes No Is your collection site currently performing eChain collections? Yes No Comments ________________________________________________________________________________ _________________________________________________________________________________________ Page 16 of 16
© Copyright 2024