1. No category

MEDVA CATALOGUE
2014-2015
Official Distributor for Official Distributor for
United Kingdom & Ireland
WE ARE MANUFACTURERS MADE IN SPAIN
Our company Medva (Mecanismos del Valles) has more than 30 years of experience in the development
and the manufacture of oleodynamic groups.
Since 2000, our company opted for R & D and produces new products that satisfy the highest standards of
quality. Products with CE certified.
Our range of oleodynamic devices for doors and gates is knowing for it design and the high quality of
their manufacture, and offers to the professional installers many solutions to their needs. Our oleodynamics
devices may adapt existing doors with the European norms.
We produce as well electromechanical actuator for sliding gates, and many oleodynamic devices as linear
shock absorber and oleodynamic rotating brakes for sliding firewall doors.
NEW
New ECO BACN
Never be able to fullfill the standard EN 12453 was so easy.
Suitable to meet EN 12453, maintaining smooth stop at the clossure. Anti-crushing with adjustable control
of the hydraulic pressure. Inhibition patented system (EP 2 511464 PATENT), reliable and easy to install.
Compatible with control panels with security contacts to the opening and closing (N.C.). Block selection
and windscreen regulation independent in opening and closing. Mounting dimensions compatible with
models from other manufacturers.
What is the BAC system?
The BAC system allows to have in a single operator a reversible and blocked system at the same time. The
BAC system can be managed by two valves (red and blue) located at the bottom of the operator.
A: Open
B: Close
Blocked in closing and reversible in opening.
A: Close
B: Open
Blocked in opening and reversible in closing.
A: Close
B: Close
Blocked in opening and blocked in closing.
A: Open
B: Open
Reversible in opening and reversible in closing.
INDEX
PAGE
ROLLER AND SECTIONAL DOORS
GEARMOTOR GEARBOX ......................................................................................................................
5
ELECTRONICS
CONTROL BOARD BA1 DUO
...........................................................................................................
CONTROL BOARD TC1 GEARBOX
..................................................................................................
TRANSMITTER UNITECH-3E
.............................................................................................................
5
5
5
OVERHEAD DOORS
OLEODYNAMIC ACTUATOR HOME
OLEODYNAMIC ACTUATOR HB1
...............................................................................................
...............................................................................................
6
7
...............................................................................................
8
GEARMOTOR ELIOT
.......................................................................................................................
OLEODYNAMIC ACTUATOR HC
...............................................................................................
9
10
SWING GATES
OLEODYNAMIC ACTUATOR ECO
SLIDING GATES
SHOCK ABSORBER AND BRAKES
OLEODYNAMIC SHOCK ABSORBER ...............................................................................................
OLEODYNAMIC BRAKES
...........................................................................................................
11
11
SYMBOLS
Accessories for doors and gates automation
Overhead door
Swing gate
Sliding gate
Roller door
Folding door.
Firewall
Hilly sliding gate
Sectional door
HOME
GEARBOX
24Vdc electromechanical actuator for sectional and roller door.
Community and residential use.
The actuator is provided with limit switches microswitch.
Quick release by rope and encoder.
Suitable to meet current regulations (EN 12453).
TECHNICAL FEATURES
ABSORBED POWER
ENGINE POWER SUPPLY
OPERATING AMBIENT TEMPERATURE
ABSORBED CURRENT
230 Vac 50 Hz
60 W
24 Vdc
-10 ºC to / a 80 ºC
2,5 A
ENCODER
Magnetic
MOTOR ROTATION SPEED
1500 rpm
SPEED OUTPUT
37,5 rpm
MAXIMUM OUTPUT TORQUE
FREQUENCY OF USE
WEIGHT
260
POWER SUPPLY VOLTAGE
25 Nm
80 %
5,5 Kg
MODEL
CODE
DESCRIPTION
GEARBOX.C
GB.CC064L22.00
24Vdc electromechanical actuator.
ELECTRONICS
MODEL
CODE
DESCRIPTION
BA1 DUO
A240.11020.00
Control board for two actuators 230Vac, provided with LCD
screen, is suitable for controlling electromechanical and
oleodynamic operators.
EA2
A240.11013.01
Control board for roller gate actuator 230Vac.
TC1 GEARBOX
A240.11103.00
Control board for the actuator GEARBOX, 24Vdc and 150W.
Provided with LCD screen, soft stop controls, anti-crushing
encoder, limit switches in opening and closing.
UNITECH-3E
A240.22000.00
Transmitter 3 channel variable code transponder.
5
5
HOME
GEARBOX
Oleodynamic operators for condominium overhead doors, max. door area 14 m ².
The BAC version is a universal system that allows to select the mode of operating (reversible,
irreversible, o semi blocked) independently in each manoeuvre.
This option is very useful to counter the wind.
The BACN version is equipped with 2 pressure sensor and it’s suitable to meet current regulations
(EN 12453).
BENEFITS
TECHNICAL FEATURES
POWER SUPPLY VOLTAGE
ABSORBED POWER
CAPACITATOR
OPERATING AMBIENT TEMPERATURE
230 Vac 50 Hz
BAC
BACN
Anti-crushing safety guaranteed by a pressure sensor
276 W
16 µf - 450 V
Adjustable soft stop
-10 ºC to / a 80 ºC
Independent blocking in each manoeuvre
TYPE OF OIL
MODEL
CODE
HV 46
PUMP FLOW RATE
0,5 l/min
MAXIMUM PRESSURE
80 BAR
OPERATING TIME
25 Sec.
MAXIMUM OUTPUT TORQUE
480 Nm
FREQUENCY OF USE
70 %
WEIGHT
12 Kg
Closing blockade
Opening blockade
Reversibility in each manoeuvre
Windproof regulation
DESCRIPTION
OVERHEAD RANGE HOME
HOME BAC
A211.10200.00
230 Vac operator, equipped with BAC system.
HOME BACN
A211.10201.00
230 Vac operator equipped with BAC system and pressure
sensor. Suitable to meet current regulations (EN 12453).
SPECIFIC ACCESSORIES
HS HOME
A231.12001.01
Special saxo arms with bearings for folding doors.
HT HOME
A231.12006.00
Telescopic arms.
TRANSMISSION TUBES
B2M HOME
95115.01
Transmission tube of 27 x 2000 mm for HT HOME.
B3M HOME
95116.01
Transmission tube of 27 x 3000 mm for HT HOME.
CA HOME
70183.02
Cap for transmission tube for HT HOME.
6
6
ECO
HB1
Oleodynamic operators for condominium overhead doors, max. door area max. 25 m ².
The BAC version is a universal system that allows to select the mode of operating (reversible,
irreversible, o semi blocked) independently in each manoeuvre.
This option is very useful to counter the wind.
The BACN version is equipped with 2 pressure sensor and it’s suitable to meet current regulations
(EN 12453).
BENEFITS
TECHNICAL FEATURES
POWER SUPPLY VOLTAGE
ABSORBED POWER
230 Vac 50 Hz
BAC
BACN
Anti-crushing safety guaranteed by a pressure sensor
431 W
Adjustable soft stop
CAPACITATOR
OPERATING AMBIENT TEMPERATURE
TYPE OF OIL
25 µf - 450 V
-10 ºC to / a 80 ºC
Independent blocking in each manoeuvre
HV 46
PUMP FOLW RATE
0,8 l/min
MAXIMUM PRESSURE
100 BAR
OPERATING TIME
23 Sec.
MAXIMUM OUTPUT TORQUE
960 Nm
Closing blockade
Opening blockade
MODEL
FREQUENCY OF USE
70 %
WEIGHT
15 Kg
CODE
Reversibility in each manoeuvre
Windproof regulation
DESCRIPTION
OVERHEAD RANGE HB1
HB1 BAC
A211.20200.00
Oleodynamic 230 Vac operator equipped with BAC system.
HB1 BACN
A211.20201.00
Oleodynamic 230 Vac operator equipped with BACN system
and pressure sensor. Suitable to meet current regulations (EN
12453).
SPECIFIC ACCESSORIES
HS HB1
A231.11001.01
Special saxo arms with bearings for folding doors.
HT HB1
A231.11006.00
Telescopic arms.
TRANSMISSION TUBES AND ACCESSORIES HB1
B2M HB1
95025.01
Transmission tube of 27 x 2000 mm for HT HB1.
B3M HB1
95026.01
Transmission tube of 27 x 3000 mm for HT HB1.
CA HB1
70132.01
Square drive for transmission tube for HT HB1.
CS HB1-A
A231.22000.K1
Set of support and screws for HS-HT HB1.
7
7
ECO
HB1
Oleodynamic operator for condominium swing leaf gate.
Patented ring on the rod to control the opening.
Slowdown feature at the end of closing cycle.
The BAC version is a universal system that allows selecting the mode
of operating (reversible, irreversible, o semi blocked) independently in
each manoeuvre.
This option is very useful to counter the wind. The BACN version is
equipped with 2 pressure sensors and it’s suitable to meet current
regulations (EN 12453).
TECHNICAL FEATURES
ECO 240
Power supply voltage
ECO 360
MA+ES
ECO 360
ECO 280
230 Vac 50 Hz
Absorbed power
276 W
Absorbed current
1,3 A
Capacitor
12 µf - 450 V
Operating ambient temperature
-15 ºC to / a 80 ºC
Maximum pressure
50 BAR
Rod stroke
242 mm
280 mm
Opening time
28 sec.
32 sec.
40 sec.
Closing time
23 sec.
28 sec.
34 sec.
Traction force
362 mm
0 to 6252 N (638 Kg)
Max. Length
4m
5m
Thermal protection
68 sec.
0 to 15586 N (1590Kg)
0 to 7793 N (795 Kg)
Thrust force
80 sec.
6m
11 Kg
11,5 Kg
12 Kg
ECO 240 ECO 280 ECO 360
0 à 12504 N (1275 Kg)
A
985 mm
1.065 mm
1.225 mm
8m
B
915 mm
995 mm
1.155 mm
C
673 mm
713 mm
793 mm
D
242 mm
280 mm
362 mm
100 ºC
Weight
DIMENSIONS
19 Kg
SWING RANGE ECO
MODEL
CODE
DESCRIPTION
ECO240 BAC
A212.21200.00
Swing gate 230 Vac operator, BAC system. Rod stroke 242
mm.
ECO280 BAC
A212.23205.00
Swing gate 230 Vac operator, BAC system. Rod stroke 280
mm.
ECO360 BAC
A212.22200.00
Swing gate 230 Vac operator, BAC system. Rod stroke 362
mm.
ECO280
BACN
A212.23206.00
Swing gate 230 Vac operator, BACN system. Rod stroke 280
mm. + Interface. EN 12453
ECO360
BACN
A212.22201.00
Swing gate 230 Vac operator, BACN system. Rod stroke 362
mm. + Interface. EN 12453
ECO280 BAC BI
A212.23207.00
Swing gate 230 Vac operator, independent oleodynamic group
230 Vac, BAC system. Rod stroke 280 mm.
ECO360 BAC BI
A212.22202.00
Swing gate 230 Vac operator, independent oleodynamic
group, BAC system. Rod stroke 362 mm.
ECO360 BAC
MA+ES
A212.22203.00
Swing gate 230 Vac operator, master and slave, BAC system.
Rod stroke 362 mm. Maximum dimensions of door 8m, 800Kg.
8
8
ELIOT
HC
Non reversing electromechanical gearmotor for sliding gates.
Intensive use.
Built-in control board, receiver and limit switches.
Self-learning programming and cycles controlled by encoder,
slowdown feature at the end of closing and opening cycles.
Ensures the maximum anti-crushing protection. Suitable to meet
current regulations (EN 12453).
TECHNICAL FEATURES
ELIOT1000
R
ELIOT600
R
Domestic standard power
ELIOT400/
24
ELIOT800/
24
230 Vac 50 Hz
Power supply voltage
230 Vac
24 Vdc
Absorbed power
281 W
210 W
50 W
90 W
Absorbed current
1,23 A
0,93 A
2,10 A
3,64 A
Capacitor
12 µf
-
Thermal protection
130 ºC
-
Encoder
Optical
Magnetic
Motor rotation speed
1450 Rpm
1500 Rpm
Gate speed
10,8 m/min
11,5 m/min
Traction and thrust force
30 Nm
Lubrication
23 Nm
16 Nm
28 Nm
Grease NLGI 0
Limit switch
Microrruptors
Operating ambient temperature
-20 ºC to 70 ºC
Protection class
IP 54
Use frequency
40 %
40 %
50 %
70 %
Weight
11 Kg
9,5 Kg
10 Kg
10,5 Kg
1000 Kg
600 Kg
400 Kg
800 Kg
Pinion module
M4
Max. weight of gate
SLIDING RANGE ELIOT
MODEL
CODE
DESCRIPTION
ELIOT1000R
A223.14100.00
Sliding gate operator, power supply 230 Vac 1000Kg. Built-in
control panel and receiver.
ELIOT600R
A223.12100.00
Sliding gate operator, power supply 230 Vac 600Kg. Built-in
control panel and receiver.
ELIOT400/24
A223.11200.00
Sliding gate operator for intensive use, power supply 24 Vdc
800Kg. Built-in control panel.
9
9
ELIOT
ELIOT800/24
1
0
HC
A223.13200.00
Sliding gate operator for intensive use, power supply 24 Vdc
400Kg. Built-in control panel.
1
0
ELIOT
HC
Oleodynamic operator for sliding gates and fire-wall sliding doors.
Intensive use.
Anti-crushing safety system guaranteed by a hydraulic device (bypass).
Suitable to meet current regulations (EN 12453).
To block the cancel it’s necessary to use an electromagnet.
TECHNICAL FEATURES
Domestic standard power
Power supply voltage
230 Vac 50 Hz
230 Vac
Absorbed power
243 W
Absorbed current
1,1 A
Capacitor
16 uf
Output torque
0 - 16 Nm
Gate speed
15 m/min
Pinion module
M4
Nº of teeth
Z 12
Operating ambient temperature
Max. weight of gate
-10 ºC a 80 ºC
500 Kg
Use frequency
70 %
Weight
10 Kg
OPERATOR HC
MODEL
CODE
HC500
A213.12000.00
1
1
DESCRIPTION
HC 500 Oleodynamic 230 V operator for sliding gates.
1
1
SHOCK ABSORBER AND
HYDRAULIC BRAKES
OLEODYNAMIC CUSHIONING
Linear shock absorber 95mm of rod stroke for gates max. 3000Kg.
Reduces the speed of the gate in the final stretch avoiding shocks.
TECHNICAL FEATURES
Max. weight of gate
3000 Kg
Maximum Strength cushioning
3100 N
Return force
30 N
Max. gate speed
0,2 m/s
-15 ºC to / a 70 ºC
Operating ambient temperature
Round
Load adjustment
ROUND
95 mm
MODEL
CODE
CIL 3095
A233.32002.00
YES
DESCRIPTION
Adjustable linear shock absorber with 95 mm rod stroke.
OLEODYNAMIC BRAKES
Oleodynamic rotating brake to regulate and control the speed of doors and gates during its displacement slope. The M4 version is equipped with
module 4 rack, and the PULLEY version with a set of pulleys for steel wire of 3 mm diameter.
MODEL
CODE
DESCRIPTION
CONTROLGIR
M4
Rotating brake, transmission through M4 pinion.
A233.32004.00
Support for fixing Controlgir M4 couple. Increasing the braking
load, max. 12 Nm.
SOPORTE DUO
70577.01
TECHNICAL CHARACTERISTICS
CONTROLGIR
M4
Pinion module
M4
Nº of teeth
Z16
Type of liquid
SILICONE 3000
Service temperature
-15 ºC à 70 ºC
Maximum weight
7 Nm
Brake direction
Left or right
Load adjustment
CONTROLGIR
POLEA
YES
TECHNICAL CHARACTERISTICS
Cable section
Primitive diameter
Type of liquid
Service temperature
Maximum weight
Brake direction
Load adjustment
Rotating brake, transmission through pulley.
A233.32003.00
CONTROLGIR
POLEA
Ø 3 mm
55 mm
SILICONE 3000
-15 ºC à 70 ºC
7 Nm
Left or right
YES
11
11
DISTRIBUTOR UNITED
KINGDOM & IRELAND
OXYGEN AUTOMATION LTD
39, Muster Green Haywards Heath
West Sussex - RH164AL
England (UK)
Reg. N° 9453829
@sales@oxygen-ltd.biz
@info@oxygen-ltd.biz
Skype: oxygen-ltd
www.oxygenautomation.weebly.com