P: 724.625.0003 P: 800.308.6916 F: 724.625.3077 www.myerscoinc.com Email: robert@myerscoinc.com Myers & Co., Inc. 121 121 Seventh Seventh Avenue Avenue •• Valencia, Valencia, PA PA 16059 16059 SAMPLE CYLINDERS OAL SND B O.D. DOT-3E1800 THREAD NPT W.T. PROPERTIES: TABLE 1 No Description 1 2 3 4 5 HSSC15-1BA HSSC15-2BA HSSC15-3BA HSSC20-1BA HSSC20-2BA Pressure Rating DOT Min. Material (psi) Stand. Volume 316 SS 316 SS 316 SS 316 SS 316 SS 1800 1800 1800 1800 1800 3E 3E 3E 3E 3E 50 CC 75 CC 150 CC 300 CC 500 CC Max. Weight B OAL 0.5 LBS 1.64” 3.80” 0.6 LBS 2.72” 4.88” 0.5 LBS 6.09” 8.25” 1.8 LBS 6.79” 9.25” 2.5 LBS 11.42” 13.88” SND Thread (NPT) O.D. W.T. 0.72“ 0.72” 0.72” 0.74” 0.74” 1/4-18 1.5” 1/4-18 1.5” 1/4-18 1.5” 1/4-18 2.0” 1/4-18 2.0” .083” .083” .083“ .095” .095” SAMPLE CYLINDERS Sample Cylinders permit the safe extraction of a sample from a remote process location and provide safe containment for storage and transportation to laboratory for analysis. Stainless Steel Sample Cylinders are hot spun from seamless 316 stainless steel for maximum integrity and corrosion resistance. All cylinders are heat code traceable Inertium TM Surface Treatment All stainless steel cylinders and valves can be supplied with Inertium surface treatment for use in high sulfur applications. Inertium almost eliminates the interaction of fragile sulfur compounds with the valves and cylinders, improving sampling accuracy and precision, as well as extending the storage time. Cylinders are atomic cleaned before processing to remove any traces of contaminants or volatile chemicals that might interfere with the sampling. ADD “SI” to above part number for Inertium treatment. (see back for valves)