PP2457/2014/Issue 1 XP95® Intrinsically Safe (IS) Manual Call Point FUNCTION The XP95 IS addressable Manual Call Point has been designed to operate as part of a radial circuit in hazardous areas when connected to a protocol translator and galvanic barrier. An alarm is initiated by pressing the resettable element. The Manual Call Point signals to the Control and Indicating Equipment using an interrupt feature within the Apollo Digital Protocol. An alarm status is indicated by a tellow and black bar in the lower section of the resettable element and a red LED. The Manual Call Point can be easily reset from the front using the supplied reset key The XP95 IS Manual Call Point can be used for both indoor and outdoor applications and has a IP67 rating. FEATURES This product offers: • ATEX Approved • Resettable operating element • Easy access, front reset mechanism • Ergonomic reset key and keyring hole • EN5 4 -11 Approved ( Red version only) Part no 55200-940 - XP95 IS Manual Call Point • IP67 rating •170° viewable LED PROTOCOL & SYSTEM CAPABILITY The XP95IS Manual Call Point is designed for use only in an intrinsically safe system together with a protocol translator and a safety barrier*. Details of system design can be found in Engineering Product Guide PP1095. The protocol translator (part no. 55000– 855 single channel, 55000–856 dual channel), whilst remaining transparent to the control panel, ensures the call point operates correctly. *Apollo recommends the Galvanic Barrier (part number 29600-098) © Apollo Fire Detectors Limited 2014 36 Brookside Road, Havant, Hampshire, PO9 1JR, UK. MANAGEMENT SYSTEMS Assessed to ISO 9001:2008 LPCB Cert No. 010 Tel: +44 (0)23 9249 2412 Fax: +44 (0)23 9249 2754 MANAGEMENT SYSTEMS Certificate No. 010 See www.RedBookLive.com Assessed to ISO 14001:2004 Certificate number EMS 010 Overseas offices: America China Germany 0359 1180 Email: productsupport@apollo-fire.com Web: www.apollo-fire.co.uk The XP95 IS Manual Call Point will operate only with control equipment using the Apollo XP95 digital protocol. TECHNICAL DATA ELECTRICAL CONSIDERATION The XP95 IS Manual Call Point is loop powered and operates at 14-22V DC. Communications Protocol XP95 5 - 9V Peak to Peak MECHANICAL CONSTRUCTION The component parts of the call point are moulded in a robust fire retardant polycarbonate. OPERATING PRINCIPLES The address of each call point is set at the commissioning stage by means of a sevensegment DIL switch. Supply voltage Operating temperature 14-22V DC -20°C to +60°C (T4) -20°C to +40°C (T5) Humidity (no condensation or icing) IP rating Quiescent 230µA Alarm Load (LED On) Once activated, the XP95 IS Manual Call Point can be reset by inserting the reset key into the front facing LED turning clockwise until a positive click and reset is present. Certified to ATEX Directive 94/9/EC Certificate number BAS02ATEX1290X A copy of the Declaration of Conformity is available from Apollo on request. Conformity of the Manual Call Point with the EMC Directive does not confer compliance with the directive on any apparatus or systems connected to it. 67 Current Consumption (max) at 22V DC A red alarm LED is provided on the call point. This LED is controlled independently of the call point, by the control panel. EMC DIRECTIVE 2004/108/EC The Manual Call Point complies with the essential requirements of the EMC Directive 2004/108/EC, provided that it is used as described in this data sheet. 0-95% Power Up Surge (1s typical) 1.2mA 1mA Equipment Markings II 1G Ex ia IIC T5 Ga (-20°C ≤ Ta ≤+45°C) or Ex ia IIC T4 Ga (-20°C ≤ Ta ≤+60°C) or II 1D Ex ia IIIC T135°C Da (-20°C ≤ Ta ≤ +60 °C) Complies with EMC Directive 2004/108/EC Red version complies with EN54–11:2001 DIMENSIONAL DRAWING DIMENSIONS AND WEIGHT Part no Description 55200-940 XP95 IS Manual Call Point Dimension & Weight 110mm x x 74mm 330g Figure 1 Typical Response Characteristics - XP95 IS Manual Call Point 110mm