High Speed FMC Analog Board for Wireless Communications Overview Applications XX Wireless communications infrastructure demonstrator XX Remote radio head XX Software-defined XX MIMO XX DPD radio diversity receivers feedback XX Satellite XX Test The AD-FMCOMMS1-EBZ high speed FPGA mezzanine card (FMC) board is designed to showcase the latest generation high speed data converters. The AD-FMCOMMS1-EBZ provides the analog front end for a wide range of compute-intensive FPGA-based radio applications. When combined with an FPGA development platform, the AD-FMCOMMS1-EBZ enables a variety of wireless communications functions at the physical layer, from baseband to RF. modems and measurement equipment XX Radar and advanced imaging XX General-purpose data acquisition AD-FMCOMMS1-EBZ connected to Xilinx Zynq™-7000 All Programmable SoC. AD-FMCOMMS1-EBZ board. Learn more and purchase at analog.com/DC13-hardware DAC LVDS INTERFACE DDS-1a DDS-1b 50MHz VDMA 𝛑 20dB 𝛑 RFOUT 𝛑 RFIN 0dB CLKOUT AD9523-1 CLOCK DIST 1GHz CLKIN ADF4351 4.5GHz ADF4351 4.5GHz SYNCIN AD8366 AMPLIFIER 600MHz ADL5380 DEMODULATOR 6GHz –9dB FMC LPC DMA AD9643 PCORE INT CNTRL 30MHz AD9548 CLOCK AND SYNC GEN 750MHz AD9643 ADC 14-BIT 14 BITS 250MSPS @ 250MHz ADC LVDS INTERFACE DMA INTERFACE REFERENCE CLOCK GEN UART TIMER ADL5602 AMPLIFIER 4GHz 0dB DDR-DDS VDMA INTERFACE DDRX ETHERNET ADL5375 MODULATOR 6GHz DDS-2b AD9122 PCORE AXI LITE AXI MICROBLAZE DDR ARM (ZYNQ) DDS-2a AD9122 DAC 16-BIT 16 BITS 1250MSPS @ 500MHz I2C SPI I2C ML605/KC705/VC707/ZC702/ZED AD-FMCOMMS1-EBZ Software defined radio block diagram. Features AES-ZSDR-ADI-G kit includes: • Avnet ZedBoard 7020 baseboard • Xilinx ISE® WebPACK software with a device locked ChipScope license (device locked to XC7Z020) • Analog Devices FMC board AD-FMCOMMS1-EBZ Benefits • Kit commercially available from Avnet • Linux drivers, applications software, HDL source, reference designs, full schematics, and Gerbers • Two pulse LTE blade antennas (2500 MHz to 2700 MHz) • 8 GB SD card • Fan assembly, antenna, screws, and standoffs • Proven, tested SDR system example reduces risk for developers of high performance FPGA/analog/RF SDR AD-FMCOMMS1-EBZ FMC board Can be purchased separately and is available from ADI and all ADI authorized distributors Software-tunable across wide bandwidth • Customizable to any frequency with no hardware changes • 400 MHz to 4 GHz design • Wide bandwidth • 200 MHz bandwidth • Allows high channel density Phase/frequency synchronization on Tx and Rx Supports MIMO radio Bypass RF section for baseband sampling Allows for general-purpose platform configuration and testing Low power Powered from single FMC connector Design Resources XX Design Files and Software • Linux drivers • Applications software • HDL source • Reference designs Visit wiki.analog.com to access the files. ©2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Printed in the U.S.A. PH11499-.75-4/13 XX Support Community Ask your technical questions in the FPGA Reference Designs Community at ez.analog.com. Learn more and purchase at analog.com/DC13-hardware Tweet it out! @ADI_News #ADIDC13