1. No category

BWT PERMAQ® Compact 41
Product data sheet
09/2014
Reverse osmosis system
Reverse osmosis system with everything in one stainless steel cabinet
Benefits:

Water quality with conductivity of <20 µS/cm

Simple and compact

Can be fitted with a conductivity meter

The combination with a mixed-bed system can
provide an even lower conductivity (<0.5 µS/cm)

Installation kit for quick and easy connection
Features:
Reliable and maintenance-friendly
This compact system is the perfect solution for small
humidifiers, instrument washers and autoclaves where
a low conductivity (< 20 µS/cm) is required and where
space is limited.
The system is particularly suited for applications with a
varied flow. Normally, such consumption patterns
create wear on the pump, especially as a result of the
many starts and stops, but the integrated 11-litre
hydrophore protects and ensures stable operation for
varying consumption patterns.
Typical application areas:

Smaller dishwashers

Glass washers

Autoclaves

Humidification systems

Smaller systems that require a small amount of
permeate water

Simple reverse osmosis system

The system’s size makes it easy to position when
space is limited

Built-in control - no additional electronics required

Manometer for reading the pressure

The system will automatically stop if there is no
inlet pressure

Automatic backwash of the membrane after each
stop

Alarm output

Integrated mixing valve for adjusting the
conductivity - the possibility to supply water
quality according to special needs
The flexible design allows for expansion with:

Conductivity meter with alarm function – giving
the system the best possible protection

Demineralisation filter as a further treatment providing even lower conductivity (< 0.5 µS/cm)

Installation - quick and simple connection
BWT HOH A/S
Geminivej 24 • DK-2670 Greve
Tel.: +45 43 600 500
bwt@bwt.dk • www.bwt.dk
Der tages forbehold for trykfejl og tekniske ændringer.
BWT PERMAQ® Compact 41
Product data sheet
09/2014
Reverse osmosis system
Technical data:
BWT PERMAQ Compact 41
Unit
Nominal permeate performance *
l/t
Salt reduction
%
> 98.0
Water utilisation WCF (min/max) **
%
40 / 75
l
2.5/3.5
Permeate tank volume
Inlet pressure (min/max)
130
bar
2.0 / 7.0
V / Hz
230 / 50
A
10
Power consumption
kW
0.6
Protection class
IP
54
”
¾
Outlet
mm
10
Drain
”
¾
Width
mm
295
Depth
mm
560
Height
mm
445
Iron and manganese (Fe+Mn)
mg/l
< 0.1
Electrical connection
Fuse
Inlet
Weight, approx.
kg
Product number
* For water quality of: 10°C, 3 bar, TDS ≤ 500 mg/l ± 15%, SDI ≤ 3.0, oxidants ≤ 0.05 mg/l.
** Based on a water quality of TDS ≤ 500 mg/l, without softening as a pre-treatment.
BWT HOH A/S
Geminivej 24 • DK-2670 Greve
Tel.: +45 43 600 500
bwt@bwt.dk • www.bwt.dk
Der tages forbehold for trykfejl og tekniske ændringer.
42
421090410