1. No category

Directional valves ► Supplementary products
Series 840
Brochure
2
Directional valves ► Supplementary products
Series 840
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air
connection output: Ø6x1 ► Electr. connection: Plug, EN 175301-803, form C ► Manual
override: with detent ► single solenoid ► Qn = 200 l/min
3
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air
connection output: Ø6x1 ► Electr. connection: Plug, EN 175301-803, form C ► Manual
override: with detent ► double solenoid ► Qn = 200 l/min
5
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air
connection output: Ø 6 ► Electr. connection: Plug, EN 175301-803, form C ► Manual
override: with detent ► single solenoid ► Qn = 200 l/min
8
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air
connection output: Ø 6 ► Electr. connection: Plug, EN 175301-803, form C ► Manual
override: with detent ► double solenoid ► Qn = 200 l/min
10
Electrical connectors, Series CN1
► ISO 15217 ► Electrical connector, form C ► 8 mm
13
Electrical connectors with cable, Series CN1
► ISO 15217, form C ► 8 mm ► with cable
14
Silencers, Series SI1
► Sintered bronze
16
Name plates
Subbases and accessories, Series 840
Accessories 16
17
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
3
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø6x1
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► single solenoid ► Qn = 200 l/
min
00138515
Version
Diaphragm poppet valve
Pilot
internal
Sealing principle
Soft sealing
Mounting on manifold strip
PRS strip
Working pressure min./max.
1.5 bar / 10 bar *
Control pressure
min./max.
1.5 bar / 10 bar
Ambient temperature min./max.
-15°C / +50°C *
Medium temperature min./max.
-15°C / +50°C *
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Connector standard
EN 175301-803, form C
Degree of protectionWith connection
IP65
Protected against polarity reversal
Duty cycle
100 %
Switch-on time
12 ms
Switch-off time
12 ms
Weight
See table below
Materials:
Housing
Polyoxymethylene
Seals
Acrylonitrile Butadiene Rubber
* The maximum working pressure depends on the ambient temperature. The following values are
applicable:
-15°C - 50°C: Working pressure 1.5 - 8 bar possible.
-15°C - 40°C: Working pressure 1.5 - 10 bar possible.
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ Versions with voltage of less than 50 V DC do not have a protective ground
Operational
voltage
AC 50 Hz
DC
AC 60 Hz
DC
Voltage
tolerance
AC 60 Hz
Power
consumption
DC
W
12 V
-
-
-10% / +10%
-
1.6
24 V
-
-
-10% / +10%
-
1.6
Switch-on
power
AC 50
AC 60
Hz
Hz
VA
VA
-
-
-
-
Holding power
AC 50
Hz
VA
AC 60
Hz
VA
-
-
-
-
-
24 V
24 V
-
-10% / +15%
-
3
2.6
2.2
1.9
-
110 V
110 V
-
-10% / +15%
-
3.1
2.6
2.2
1.9
-
230 V
230 V
-
-10% / +15%
-
3.2
2.8
2.3
2
-
230 V
230 V
-
-10% / +15%
-
3.5
3
2.5
2.2
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
4
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø6x1
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► single solenoid ► Qn = 200 l/
min
MO
Compressed air connection
Input
Output
Ø6x1
Part No.
Holding
power
AC 50 Hz
[VA]
5728400410
-
5728400420
-
Exhaust
Ø6x1
Holding
power
AC 60 Hz
[VA]
-
Pilot control
exhaust
Ø6x1
Switch-on
power
AC 50 Hz
[VA]
-
-
-
Part No.
12 V
-
-
5728400410
24 V
-
-
5728400420
24 V
-
-
5728400620
-
24 V
24 V
5728405420
-
110 V
110 V
5728405470
-
230 V
230 V
5728405480
-
230 V
230 V
5728405680
Ø 4,5
Switch-on
power
AC 60 Hz
[VA]
-
Operational
voltage
DC
AC 50 AC 60
Hz
Hz
Power
consumption
24 V DC
[W]
1.6
-
1.6
5728400620
-
-
-
-
1.6
5728405420
2.2
1.9
3
2.6
-
5728405470
2.2
1.9
3.1
2.6
-
Flow rate
value
Qn
[l/min]
Weight
Note
[kg]
200
0.096
-
0.097
-
0.097
1)
0.095
-
0.096
-
5728405480
2.3
2
3.2
2.8
-
0.095
-
5728405680
2.5
2.2
3.5
3
-
0.095
1)
HHB = Manual override
1) LED status display: Red
Nominal flow Qn at 6 bar and Δp = 1 bar
Dimensions
2)
3)
4)
5)
20
BA
15.8
PR
13.5
A
ø4.3
B
8.3
80.2
38.4
P
R
19.7
15.4
Z
87
1
29.6
38.4
0
12.1
39.5
50.4
6)
20.4
1)
19.5
28
22.5
D572_840
1) manual override 2) el. connector 3) LED display 4) coil can be rotated at 180° intervals
5) mounting space for name plate 6) hold for M5 fitting or silencer Ø 4.5 mm
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
5
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø6x1
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► double solenoid ► Qn = 200
l/min
00138520
Version
Diaphragm poppet valve
Pilot
internal
Sealing principle
Soft sealing
Mounting on manifold strip
PRS strip
Working pressure min./max.
1.8 bar / 10 bar *
Control pressure
min./max.
1.8 bar / 10 bar
Ambient temperature min./max.
-15°C / +50°C *
Medium temperature min./max.
-15°C / +50°C *
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Connector standard
EN 175301-803, form C
Degree of protectionWith connection
IP65
Protected against polarity reversal
Duty cycle
100 %
Switch-on time
12 ms
Switch-off time
12 ms
Weight
See table below
Materials:
Housing
Polyoxymethylene
Seals
Acrylonitrile Butadiene Rubber
* The maximum working pressure depends on the ambient temperature. The following values are
applicable:
-15°C - 50°C: Working pressure 1.8 - 8 bar possible.
-15°C - 40°C: Working pressure 1.8 - 10 bar possible.
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ Versions with voltage of less than 50 V DC do not have a protective ground
Operational
voltage
AC 50 Hz
DC
AC 60 Hz
DC
Voltage
tolerance
AC 60 Hz
Power
consumption
DC
W
12 V
-
-
-10% / +10%
-
1.6
24 V
-
-
-10% / +10%
-
1.6
Switch-on
power
AC 50
AC 60
Hz
Hz
VA
VA
-
-
-
-
Holding power
AC 50
Hz
VA
AC 60
Hz
VA
-
-
-
-
-
24 V
24 V
-
-10% / +15%
-
3
2.6
2.1
1.9
-
110 V
110 V
-
-10% / +15%
-
3.1
2.6
2.2
1.9
-
230 V
230 V
-
-10% / +15%
-
3.2
2.8
2.3
2
-
230 V
230 V
-
-10% / +15%
-
3.5
3
2.5
2.2
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
6
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø6x1
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► double solenoid ► Qn = 200
l/min
MO
Compressed air connection
Input
Output
Ø6x1
Part No.
Holding
power
AC 50 Hz
[VA]
5728410410
-
5728410420
-
Exhaust
Ø6x1
Holding
power
AC 60 Hz
[VA]
-
Pilot control
exhaust
Ø6x1
Switch-on
power
AC 50 Hz
[VA]
-
Operational
voltage
DC
AC 50 AC 60
Hz
Hz
12 V
-
-
5728410410
24 V
-
-
5728410420
24 V
-
-
5728410620
-
24 V
24 V
5728415420
-
110 V
110 V
5728415470
-
230 V
230 V
5728415480
-
230 V
230 V
5728415680
Ø 4,5
Switch-on
power
AC 60 Hz
[VA]
-
Part No.
Power
consumption
24 V DC
[W]
1.6
-
1.6
5728410620
-
-
-
-
1.6
5728415420
2.1
1.9
3
2.6
-
5728415470
2.2
1.9
3.1
2.6
Flow rate
value
Qn
[l/min]
200
Weight
[kg]
Note
0.156
-
0.157
-
0.158
1)
0.153
-
-
0.157
-
5728415480
2.3
2
3.2
2.8
-
0.156
-
5728415680
2.5
2.2
3.5
3
-
0.16
1)
HHB = Manual override
1) LED status display: Red
Nominal flow Qn at 6 bar and Δp = 1 bar
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
7
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø6x1
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► double solenoid ► Qn = 200
l/min
Dimensions
D572_841
1) manual override 2) el. connector 3) LED display 4) coil can be rotated at 180° intervals
5) mounting space for name plate 6) hold for M5 fitting or silencer Ø 4.5 mm
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
8
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø 6
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► single solenoid ► Qn = 200 l/
min
00138516
Version
Diaphragm poppet valve
Pilot
internal
Sealing principle
Soft sealing
Mounting on manifold strip
PRS strip
Working pressure min./max.
1.8 bar / 10 bar *
Control pressure
min./max.
1.5 bar / 10 bar
Ambient temperature min./max.
-15°C / +50°C *
Medium temperature min./max.
-15°C / +50°C *
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Connector standard
EN 175301-803, form C
Degree of protectionWith connection
IP65
Protected against polarity reversal
Duty cycle
100 %
Switch-on time
12 ms
Switch-off time
12 ms
Weight
See table below
Materials:
Housing
Polyoxymethylene
Seals
Acrylonitrile Butadiene Rubber
* The maximum working pressure depends on the ambient temperature. The following values are
applicable:
-15°C - 50°C: Working pressure 1.8 - 8 bar possible.
-15°C - 40°C: Working pressure 1.8 - 10 bar possible.
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ Versions with voltage of less than 50 V DC do not have a protective ground
Operational
voltage
AC 50 Hz
DC
AC 60 Hz
DC
Voltage
tolerance
AC 60 Hz
Power
consumption
DC
W
12 V
-
-
-10% / +10%
-
1.6
24 V
-
-
-10% / +10%
-
1.6
Switch-on
power
AC 50
AC 60
Hz
Hz
VA
VA
-
-
-
-
Holding power
AC 50
Hz
VA
AC 60
Hz
VA
-
-
-
-
-
24 V
24 V
-
-10% / +15%
-
3
2.6
2.2
1.9
-
110 V
110 V
-
-10% / +15%
-
3.1
2.6
2.2
1.9
-
230 V
230 V
-
-10% / +15%
-
3.2
2.8
2.3
2
-
230 V
230 V
-
-10% / +15%
-
3.5
3
2.5
2.2
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
9
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø 6
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► single solenoid ► Qn = 200 l/
min
MO
Compressed air connection
Input
Output
Ø6x1
Part No.
Holding
power
AC 50 Hz
[VA]
5728450410
-
5728450420
-
Exhaust
Ø6
Holding
power
AC 60 Hz
[VA]
-
Pilot control
exhaust
Ø6x1
Switch-on
power
AC 50 Hz
[VA]
-
Operational
voltage
DC
AC 50 AC 60
Hz
Hz
12 V
-
-
5728450410
24 V
-
-
5728450420
24 V
-
-
5728450620
-
24 V
24 V
5728455420
-
110 V
110 V
5728455470
-
230 V
230 V
5728455480
-
230 V
230 V
5728455680
Ø 4,5
Switch-on
power
AC 60 Hz
[VA]
-
-
Part No.
Power
consumption
24 V DC
[W]
1.6
-
1.6
5728450620
-
-
-
-
1.6
5728455420
2.2
1.9
3
2.6
-
5728455470
2.2
1.9
3.1
2.6
-
Flow rate
value
Qn
[l/min]
Weight
200
Note
[kg]
0.101
-
0.103
-
0.103
1)
0.1
-
0.101
-
5728455480
2.3
2
3.2
2.8
-
0.102
-
5728455680
2.5
2.2
3.5
3
-
0.102
1)
HHB = Manual override
1) LED status display: Red
Nominal flow Qn at 6 bar and Δp = 1 bar
Dimensions
D572_845
1) manual override 2) el. connector 3) LED display 4) coil can be rotated at 180° intervals
5) mounting space for name plate 6) hold for M5 fitting or silencer Ø 4.5 mm
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
10
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø 6
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► double solenoid ► Qn = 200
l/min
00138519
Version
Diaphragm poppet valve
Pilot
internal
Sealing principle
Soft sealing
Mounting on manifold strip
PRS strip
Working pressure min./max.
1.8 bar / 10 bar
Control pressure
min./max.
1.8 bar / 10 bar
Ambient temperature min./max.
-15°C / +50°C
Medium temperature min./max.
-15°C / +50°C
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Connector standard
EN 175301-803, form C
Degree of protectionWith connection
IP65
Protected against polarity reversal
Duty cycle
100 %
Switch-on time
12 ms
Switch-off time
12 ms
Weight
See table below
Materials:
Housing
Polyoxymethylene
Seals
Acrylonitrile Butadiene Rubber
* The maximum working pressure depends on the ambient temperature. The following values are
applicable:
-15°C - 50°C: Working pressure 1.8 - 8 bar possible.
-15°C - 40°C: Working pressure 1.8 - 10 bar possible.
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ Versions with voltage of less than 50 V DC do not have a protective ground
Operational
voltage
AC 50 Hz
DC
AC 60 Hz
DC
Voltage
tolerance
AC 60 Hz
Power
consumption
DC
W
12 V
-
-
-10% / +10%
-
1.6
24 V
-
-
-10% / +10%
-
1.6
Switch-on
power
AC 50
AC 60
Hz
Hz
VA
VA
-
-
-
-
Holding power
AC 50
Hz
VA
AC 60
Hz
VA
-
-
-
-
-
24 V
24 V
-
-10% / +15%
-
3
2.6
2.2
1.9
-
110 V
110 V
-
-10% / +15%
-
3.1
2.6
2.2
1.9
-
230 V
230 V
-
-10% / +15%
-
3.2
2.8
2.3
2
-
230 V
230 V
-
-10% / +15%
-
3.5
3
2.5
2.2
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
11
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø 6
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► double solenoid ► Qn = 200
l/min
MO
Compressed air connection
Input
Output
Ø6x1
Part No.
Holding
power
AC 50 Hz
[VA]
5728460410
-
5728460420
-
Exhaust
Ø6
Holding
power
AC 60 Hz
[VA]
-
Pilot control
exhaust
Ø6x1
Switch-on
power
AC 50 Hz
[VA]
-
Operational
voltage
DC
AC 50 AC 60
Hz
Hz
12 V
-
-
5728460410
24 V
-
-
5728460420
24 V
-
-
5728460620
-
24 V
24 V
5728465420
-
110 V
110 V
5728465470
-
230 V
230 V
5728465480
-
230 V
230 V
5728465680
Ø 4,5
Switch-on
power
AC 60 Hz
[VA]
-
Part No.
Power
consumption
24 V DC
[W]
1.6
-
1.6
5728460620
-
-
-
-
1.6
5728465420
2.2
1.9
3
2.6
-
5728465470
2.2
1.9
3.1
2.6
Flow rate
value
Qn
[l/min]
Weight
200
[kg]
Note
0.205
-
0.163
-
0.165
1)
0.165
-
-
0.21
-
5728465480
2.3
2
3.2
2.8
-
0.155
-
5728465680
2.5
2.2
3.5
3
-
0.16
1)
HHB = Manual override
1) LED status display: Red
Nominal flow Qn at 6 bar and Δp = 1 bar
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
12
Directional valves ► Supplementary products
4/2-directional valve, Series 840
► Qn = 200 l/min ► Pilot valve width: 22.5 mm ► pipe connection ► compressed air connection output: Ø 6
► Electr. connection: Plug, EN 175301-803, form C ► Manual override: with detent ► double solenoid ► Qn = 200
l/min
Dimensions
D572_846
1) manual override 2) el. connector 3) LED display 4) coil can be rotated at 180° intervals
5) mounting space for name plate 6) hold for M5 fitting or silencer Ø 4.5 mm
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
13
Directional valves ► Supplementary products
Series 840
Accessories
Electrical connectors, Series CN1
► ISO 15217 ► Electrical connector, form C ► 8 mm
Ambient temperature min./max.
-40°C / +90°C
Protection class
IP65
Cable fitting
M12x1,5
mounting screw tightening torque
0.4 Nm
Materials:
Housing
Polyamide
P894_220
-20% / +20%
1
2
1
2
gn/ge
1
1
2
2
gn/ge
Max. Contact assigncurrent
ment
Cable exit
Protective
circuit
suitable
cable-Ø min./
max
Part No.
DC
[V]
AC
[V]
[A]
300
250
6
2+E
angled 90°
-
4/6
1834484187
24
24
-
2+E
angled 90°
Z-diode
-
4402050330
[mm]
Part No. number of plug options 1
Status display
LED status
display
Housing color
Weight
Fig.
Note
1834484187
4 positions each 90°
-
-
Black
0.012
4402050330
4 positions each 90°
1 LED
Green
Transparent
Fig. 1
1); 2)
0.014
Fig. 3
-
[kg]
1) Profile seal
2) Seal: caoutchouc/butadiene caoutchouc
Fig. 1
00110255
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
14
Directional valves ► Supplementary products
Series 840
Accessories
Fig. 2
PG7
Ø15
26
15,5
35
8
0,2
23,5
15,5
25,5
23276
Fig. 3
00110253_m
Electrical connectors with cable, Series CN1
► ISO 15217, form C ► 8 mm ► with cable
Ambient temperature min./max.
-20°C / +80°C
Protection class
IP67
Tightening torque for mounting screws
0.4 Nm
Materials:
Seals
caoutchouc/butadiene caoutchouc
P894_018
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
15
Directional valves ► Supplementary products
Series 840
Accessories
-20% / +20%
max.
[V DC] [V AC]
1
1
2
2
gn/ge
1
1
2
2
gn/ge
1
1
2
2
gn/ge
Part No.
230
24
230
230
24
230
Max. current
[A]
Protective
circuit
6
Contact assignment
-
6
2+E
Z-diode
6
LED status Cable length L
display
[m]
2+E
Varistor
2+E
Weight
[kg]
-
Yellow
Yellow
Fig.
1834484212
0.183
1834484213
0.183
Fig. 2
1834484214
0.308
Fig. 1
Part No.
3
1834484212
3
1834484213
5
1834484214
5
1834484215
3
1834484204
3
1834484205
5
1834484206
5
1834484207
3
1834484208
3
1834484209
5
1834484210
5
1834484211
Note
Fig. 1
1834484215
0.308
Fig. 2
1834484204
0.185
Fig. 1
1834484205
0.185
Fig. 2
1834484206
0.292
Fig. 1
1834484207
0.298
Fig. 2
1834484208
0.171
Fig. 1
1834484209
0.194
Fig. 2
1834484210
0.297
Fig. 1
1834484211
0.285
Fig. 2
-
1)
1)
1) Flat gasket
Fig. 1
Fig. 2
00132210
1) 0° female insert
00132211
2) 180° female insert
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
16
Directional valves ► Supplementary products
Series 840
Accessories
Silencers, Series SI1
► Sintered bronze
Working pressure min./max.
0 bar / 10 bar
Ambient temperature min./max.
-25°C / +80°C
Medium
Compressed air
P899_380
Materials:
Silencers
Sintered bronze
Weight
[kg]
Part No.
0.008
8993800114
Dimensions
D899_380
Name plates
P894_305
Part No.
Type
8943056312
1-10
8943056322
11-20
Delivery
quantity
[Piece]
5
5
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
17
Directional valves ► Supplementary products
Series 840
Accessories
Subbases and accessories, Series 840
9,5
12)
2)
11)
3)
P
P
P
P
P
R
R
R
R
R
=
48
=
41
5)
1) 4)
P898_370
41,5
29
6)
23
7)
11,5
23
8)
12,5
13)
5 x 23=115
10)
9)
18)
14), 15)
21
12
16)
17)
P
R
B
22)
19)
A
6
16
23
64,5
20)
42,5
75
11,5
P
P
B
R
A
R
21)
00133202
Part No.
Type
Material
Material
Seal
Fig.
8985003702
Supply plate complete with seals
Polyoxymethylene
Acrylonitrile Butadiene
Rubber
Fig. 1
8938000910
Reducing fitting Ø 8x1 to Ø 6x1, push-in
incl. O-ring
-
-
Fig. 2
8938000920
Reducing fitting Ø 8x1 to Ø 8x1, push-in
incl. O-ring
-
-
Fig. 2
8985003722
End plate, complete with O-rings
Polyoxymethylene
Acrylonitrile Butadiene
Rubber
Fig. 3
8985003712
sandwich plate complete with seals
Polyoxymethylene
Acrylonitrile Butadiene
Rubber
Fig. 4
8938306550
elbow fitting Ø 8x1 to Ø 6x1, push-in, incl.
O-ring
-
-
Fig. 5
8938306560
elbow fitting Ø 8x1 to Ø 8x1, push-in, incl.
O-ring
-
-
Fig. 5
8938307900
double elbow fitting, plastic pipe Ø 6x1 for
supply plate
-
-
Fig. 6
8938307800
double elbow fitting, plastic pipe Ø 8x1 for
supply plate
-
-
Fig. 6
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
18
Directional valves ► Supplementary products
Series 840
Accessories
Part No.
Type
Material
Material
Seal
Fig.
8938306500
single elbow fitting, plastic pipe Ø 6x1 for
supply plate
Polyoxymethylene
Acrylonitrile Butadiene
Rubber
Fig. 7
8938306510
single elbow fitting, plastic pipe Ø 8x1 for
supply plate
Polyoxymethylene
Acrylonitrile Butadiene
Rubber
Fig. 7
5728400414
Cover plate for manifold
Polyamide
-
Fig. 8
5728400092
Connecting kit for second inlet base
Brass
Acrylonitrile Butadiene
Rubber
Fig. 9
5324002020
silencer for port R of supply plate
Sintered bronze
- Fig. 10
5728400424
Cover plate for plug module
Polyamide
- Fig. 11
8942003902
PG-fitting for plug module
Polyamide
- Fig. 12
5728406004
Dummy flange for reserve places complete
with seals
Polyamide
- Fig. 13
8938009390
Tubing connector for separate or additional
P-supply for plastic tubing Ø 6x1
Brass
- Fig. 14
8938013600
Tubing connector for separate or additional
P-supply for plastic tubing Ø 5x1
Brass
- Fig. 15
8930714804
Tube nut for valve conn. R
Polyamide
- Fig. 16
5324002000
silencer for valve connection R
Sintered bronze
- Fig. 17
8938403900
Elbow fitting, 1x, for tube Ø6x1, incl. O-ring
and tube nut
Polyoxymethylene
- Fig. 18
8930715002
Screw plug for valve connection A or B
Polyamide
- Fig. 19
8941013312
El. conn. module for max. 250 V, with cable
conduit
Polyamide
- Fig. 20
5728417904
Actuating element
Polyethylene
- Fig. 21
8938403950
Elbow fitting, 2x, for tube Ø6x1, incl. O-ring
and tube nut
Polyoxymethylene
- Fig. 22
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-11-03, ©AVENTICS S.a.r.l., subject to change
Aventics GmbH
Ulmer Straße 4
30880 Laatzen
Phone +49 511 2136-0
Fax +49 511 2136-269
www.aventics.com
info@aventics.com
Find more contact information at
www.aventics.com/contact
Only use the AVENTICS products
shown in industrial applications.
Read the product documentation
completely and carefully before using
the product.
Observe the applicable regulations
and laws of the respective country.
When integrating the product into
applications, note the system
manufacturer’s specifications for safe
use of the product.
The data specified only serve to
describe the product.
No statements concerning a certain
condition or suitability for a certain
application can be derived from our
information.
The information given does not
release the user from the obligation
of own judgment and verification.
It must be remembered that the
products are subject to a natural
process of wear and aging.
03-11-2014
An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration.
Subject to change. © AVENTICS S.à.r.l.. This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of AVENTICS S.a.r.l.. It may not be reproduced or given to third parties without its
consent. PDF online