AirPRO Dust Evacuation Nut Problem: dust left behind after processing. Without AirPRO dust accumulates in cut. balanced to 24,000 RPM at G2.5 • greatly reduces airborne dust and dust on the floor • cleaner workpiece and safer work environment AirPRO evacuates dust directly into hood. • use with ER32, ER40 or SYOZ25 collet chucks Dust removal can become a time-consuming health and safety problem if the dust extraction on your CNC router is inadequate. The new AirPRO from NAP GLADU removes dust from nested cutting operations so it never has a chance to accumulate. Sawdust is ventilated directly into the CNC dust collection hood by the AirPRO, leaving a cleaner cut and clean air behind. AirPRO Specifications Learn more: http://ow.ly/BnPe3 FRONT BACK Contact your local NAP GLADU location at one of the numbers below for more information. Part No. Description Min RPM Max RPM D L H h Weight 18T-6001 ER32 AirPRO 18,000 24,000 1.97" 3.77" 1.77" 1.24" 1.1 lb 18T-6101 ER40 AirPRO 18,000 24,000 2.48" 4.06" 1.81" 1.13" 1.4 lb 18T-6201 SYOZ25 AirPRO 18,000 24,000 2.36" 3.92" 1.97" 1.13" 1.3 lb Warranty: AirPRO is guaranteed to perform as described, but must be used with on-size precision ER collets and tightened to torque specifications above using a tightening stand, torque wrench and proper adapter or warranty becomes invalid. LITNGAIRPROFLY2014 USA – 10 Locations 1180 Wernsing Road Jasper, Indiana 47546 USA Toll Free: 1 (800) 547-7468 Tel: (812) 482-2000 Fax: (800) 457-7458 email: sales@napgladu.com CANADA – Maireville 2115 rue Saint-Césaire Marieville (Qc) Canada J3M 1E5 Toll Free: 1 (800) 363-9117 Tel: (450) 460-4481 Fax: (450) 460-2655 email: gladu@gladu.com CANADA – Toronto 222 Evans Ave Toronto, (Ont.) Canada M8Z 1J8 Toll Free: 1 (888) 251-2236 Tel: (416) 251-2236 Fax: (416) 251-7268 email: info@napgladu.com