Download Report

HAYFLOW™ Q Filter Element Range
High capacity extended-life needle felt
with ultrafine nylon mesh cover layer
Eaton‘s HAYFLOW Q
filter elements are
suitable for a wide
range of applications
such as automotive
washing and rinsing
lines, paints, coatings,
inks, dispersions,
resins, water and
waste water treatment, lubricants and
metalworking fluids,
aqueous and solvent
based cleaners in parts
washing equipment
and many more.
HAYFLOW Q filter elements are a
combination of proven DURAGAF
extended-life filter material with
precise nylon-monofilament woven material. While the DURAGAF
extended-life filter material works
as a high capacity pre- and depth
filter, the outer mesh covers the
needle felt and provides a final
filter retention rating at 10 μm.
Features and benefits
�
Applicable for highly inter
mittent operating conditions and
continuous demand
�
Long intervals between filter
element change-outs (up to
five times in comparison with
standard needle felt filter bags)
�
High capacity depth filtration
with an absolute particulate
efficiency and fiber release
retention through the high purity
cover layer
�
Absolute particulate efficiency
combined with high dirt-holding
capacity
�
Fully-welded construction with
patented SENTINEL® seal ring
provides 100% bypass-free
filtration
�
Material is free from silicone
and crater-forming substances1
Filter specifications
Materials
Extended-life needle felt
polypropylene or polyester
Cover layer
Nylon-monofilament mesh 10 μm
Seal rings
Welded polypropylene or
polyester SENTINEL seal ring and
bottom ring
Retention ratings
1, 5, 10, 25 µm
Dimensions/Parameters
Size
02: Ø 7 x 28” L (180 x 700 mm)
Filter area
02: 7.5 ft² (0.7 m²)
Max. operating
temperatures
Polypropylene: 194 °F (90 °C)
Polyester: 302 °F (150 °C)
Max. differential pressure
36.2 psi (2.5 bar)
Recommended
change-out pressure for
disposal2
11.6 – 21.7 psi (0.8 – 1.5 bar)
Max. flow rates3
02: 132 GPM (30 m³/h)
HAYFLOW Q Filter Element Range
Required tools
Additional, recommended tools
Restrainer basket
BKT-AS-02-HAYFLOW
(F671224A)
Deflector without magnets
DEF-02-HAYFLOW (F671280)
Deflector with magnets
DEF-MG-02-HAYFLOW (F672551)
A new restrainer basket is
required. The bridge on top in
combination with the extraction
tool AH-HAYFLOW (F670844A)
allows easy basket removal.
Deflector device is used as an insertion
tool, but remains inside the filter element during filtration. The center cap
protects the inner sleeve top section
against abrasive flow stream.
Insertion tool
BLK-HAYFLOW (F670843A)
LOFNETIC magnet bars
LOFNET-3BAR-02-HAYFLOW (F671131)
Ensures a perfect fit into the restrainer basket. Remove before
closing the bag filter housing.
The magnetic bars support the retention of magnetic particles and can
also be used as an insertion tool that
remains in the filter element during
filtration.
Extraction tool
AH-HAYFLOW (F670844A)
Ensures easy and safe removal of the
filter element.
Ordering information
Ranges/Materials
POXL: Extended-life needle felt
polypropylene
PEXL: Extended-life needle felt
polyester
POXL
Retention
ratings
1, 5, 10, 25 µm
-1
-Q02HAY
Packaging
8: Filter elements/box
L: Box size
-08L
Size
02: Ø 7 x 28” L (180 x 700 mm)
NMO: 10 µm
Other material combinations and sizes available.
Based on an accepted paint compatibility test (see document QUC-STA-10).
Depending on the respective application requirements.
3
For liquids with a dynamic viscosity of 1 mPa·s @ 68 °F (20 °C).
1
2
North America
44 Apple Street
Tinton Falls, NJ 07724
Toll Free: 800 656-3344
(North America only)
Tel: +1 732 212-4700
China
No. 3, Lane 280,
Linhong Road
Changning District, 200335
Shanghai, P.R. China
Tel: +86 21 5200-0099
Europe/Africa/Middle East
Auf der Heide 2
53947 Nettersheim, Germany
Tel: +49 2486 809-0
Singapore
4 Loyang Lane #04-01/02
Singapore 508914
Tel: +65 6825-1668
Internormen Product Line
Friedensstraße 41
68804 Altlußheim, Germany
Tel: +49 6205 2094-0
Brazil
Av. Julia Gaioli, 474 – Bonsucesso
07251-500 – Guarulhos, Brazil
Tel: +55 11 2465-8822
Begerow Product Line
An den Nahewiesen 24
55450 Langenlonsheim, Germany
Tel: +49 6704 204-0
For more information, please
email us at filtration@eaton.com
or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks
and registered trademarks are the property of their
respective owners. All information and recommendations appearing in this brochure concerning the use of
products described herein are based on tests believed
to be reliable. However, it is the user’s responsibility
to determine the suitability for his own use of such
products. Since the actual use by others is beyond our
control, no guarantee, expressed or implied, is made
by Eaton as to the effects of such use or the results
to be obtained. Eaton assumes no liability arising out
of the use by others of such products. Nor is the information herein to be construed as absolutely complete,
since additional information may be necessary or
desirable when particular or exceptional conditions or
circumstances exist or because of applicable laws or
government regulations.
US
EF-FTB-14
08-2014
8