Easter Specials on Grace® Filtration Products 13mm & 25mm Syringe Filters – up to 30% off list price! Choose from a variety of membranes and devices for all of your sample filtration needs Nylon is hydrophilic and has good solvent resistance. Suitable for general filtration needs PVDF is hydrophilic, highly solvent resistant, and low protein binding. Suitable for HPLC sample prep PTFE is hydrophobic with exceptional solvent resistance. Suitable for aggressive filtration needs such as gas and solvent filtration Syringe Filter Specifications Diameter Max. Temp. Max. Pressure Hold-Up Volume Typical Sample Volume 13mm 60°C 100psig Less than 10μL Up to 5mL 25mm 60°C 100psig Less than 50μL Up to 50mL Syringe Filters Nylon PVDF Price AUD Part No. PTFE Diameter Pore Size Qty. Part No. Price AUD Part No. Price AUD 13mm 0.2μm 100 2166 $46 2647 $56 2164 $53 13mm 0.2μm 1000 2166/1000 $423 2647/1000 $487 2164/1000 $487 13mm 0.45μm 100 2167 $46 2648 $56 2165 $53 13mm 0.45μm 1000 2167/1000 $423 2648/1000 $487 2165/1000 $487 25mm 0.2μm 100 2045 $62 2223 $72 2089 $67 25mm 0.2μm 1000 2045/500 $269 2223/500 $333 2089/500 $295 25mm 0.45μm 100 2047 $62 2224 $72 2090 $67 25mm 0.45μm 1000 2047/500 $269 2224/500 $333 2090/500 $295 Also available: 4mm, 17mm and 30mm diameters to suit a variety of sample sizes. Vacuum Filtration System – up to 30% off! Eliminate solvent transfer steps with direct filtration into any GL-45 reservoir Interchange funnels and in-line filter cap handle any filtration volume Durable polypropylene construction Part No. Price AUD 1L Filter Funnel System, Includes: Base, Adapter Kit, Mesh Filter Support, 1L Funnel 6409 $377 2L Filter Funnel System, Includes: Base, Adapter Kit, Mesh Filter Support, 2L Funnel 6429 $389 In-Line Filtration System, Includes: Base, Adapter Kit, Mesh Filter Support, In-Line Filter Cap 6407 $403 Vacuum Filtration System Request your FREE Grace coffee mug when you order $800 or more from the Grace® filtration Easter promotion* *Must be mentioned at time of ordering Adelab Scientific | T 08 8234 7955 | F 08 8234 7897 | E info@adelab.com.au Easter Specials on Grace® Filtration Products 2mL & 50mL Centrifuge Filter Tubes – an economical alternative to brand name filter tubes 2mL Centrifuge Filter Tubes 50mL Centrifuge Filter Tubes Quickly and easily remove particulates and clarify small sample volumes. Less than 5μL hold-up volume provides near quantitative volumetric recovery. Includes a glass support membrane. Remove particulates from larger sample sizes with any centrifuge that holds 50mL conical tubes. They should only be used with a fixed-angle rotor centrifuge to prevent premature clogging of the membrane. Maximum operating temperature 50°C. Centrifuge Filter Tubes Nylon PVDF Regenerated Cellulose Size Max. Sample Volume Max. G-Force Pore Size Qty. Part No. Price AUD Part No. Price AUD Part No. Price AUD 2mL 850μL 10,000xG 0.2μm 100 24137 $139 24142 $156 24148 $139 2mL 850μL 10,000xG 0.45μm 100 24139 $139 24144 $156 24150 $139 50mL 25mL 2,500xG 0.2μm 50 24156 $125 24160 $156 — — 50mL 25mL 2,500xG 0.45μm 50 24158 $125 24162 $156 — — Pre-Cut Filter Membranes (non-sterile) – up to 70% off list price! Cellulose Acetate Membranes are hydrophilic and exhibit very low protein retention. Use for general biological filtration, sterilization, and filtration of aqueous solutions. Nylon Membranes are hydrophilic and resistant to many solvents. Use for filtration and clarification of aqueous or organic solutions. PTFE Membranes are hydrophobic and highly solvent resistant. Use for filtration of air, gases, and non-aqueous solutions. Pre-treat with methanol before using with aqueous solutions. Pre-Cut Filter Membranes Pore Diameter Size Qty. Nylon PTFE Part No. Price AUD Part No. Price AUD Cellulose Acetate Price Part No. AUD 13mm 0.2μm 100 2046 $19 2013 $22 2125 $22 13mm 0.45μm 100 2044 $19 2015 $22 2126 $22 25mm 0.2μm 100 2050 $25 2023 $33 2128 $29 25mm 0.45μm 100 2048 $25 2029 $33 2129 $29 25mm 1.00μm 100 — — 2056 $33 — — 47mm 0.2μm 100 2034 $55 2057 $60 2133 $55 47mm 0.45μm 100 2024 $55 2058 $60 2135 $55 GRACE®,is a trademark, registered in the United States and/or other countries, of W. R. Grace & Co.Conn. ALLTECH® is a trademark, registered in the United States and/or other countries of, Alltech Associates, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status. Alltech Associates, Inc. is a wholly owned subsidiary of W. R. Grace & Co.- Conn. Grace Discovery Sciences is a product group of W. R. Grace & Co.-Conn., which now includes all product lines formerly sold under the Alltech brand. Grace Materials technologies is a business segment of W. R. Grace & Co.Conn, which includes products formerly sold under the Grace Davison brand. The technical information presented herein is derived from our testing and experience. It is offered for your consideration and verification. Since operating conditions vary significantly, and are not under our control, we disclaim all warranties on the results that may be obtained from the use of our products. Grace reserves the right to change prices and/or specifications without prior notification. Printed in Australia. © Copyright 2015 Alltech Associates, Inc. All rights reserved. FL-03/2015AU- Adelab All prices are ex-GST, valid for South Australian customers only and must be mentioned at time of ordering. All offers valid until April 30, 2015
© Copyright 2024