Download Report

Spooky2
Morgellons Protocol
Version 2.03
David Bourke/Dec 2014
Table of contents
Protocol introduction.................................................................................................................1
How it all works........................................................................................................................2
JW settings 1............................................................................................................................. 7
JW settings 2............................................................................................................................. 8
DH settings 1............................................................................................................................ 9
DH settings 2.......................................................................................................................... 10
SSS settings............................................................................................................................. 11
SCS settings............................................................................................................................ 12
SMS settings........................................................................................................................... 13
Core: Phase I–terrain...............................................................................................................14
Core: Phase II–organisms....................................................................................................... 16
Satellite 1: chemicals.............................................................................................................. 22
Satellite 2: pathogens.............................................................................................................. 22
Satellite 3: fungi...................................................................................................................... 24
Satellite 4: parasites................................................................................................................ 25
Morgellons: slime moulds.......................................................................................................26
Morgellons: body knowledge................................................................................................. 28
Thanks.....................................................................................................................................32
Click on a chapter to go there.
Protocol introduction
This protocol was originally developed early in 2013 with the help and advice of seasoned Rife experimenter Johann Stegmann.
It was designed to be used with the UDB1108S generator and the original Spooky software. But change is our heartbeat, and the
trusty old UDB has been replaced by the far more powerful and versatile Spooky2-XM generators. Spooky has also evolved to
become Spooky2 – a true rifing powerhouse.
Advanced Spooky2 technology means that the protocol is now more effective and quicker to do. It’s not yet a full cure – we’re
still actively working on that – but it will remove all metals and toxins, kill all co-infections and parasites, and destroy a large part
of the infrastructure that this man-made bioweapon creates in your body and depends upon to flourish.
To our knowledge, there are five Morgellons varieties (but probably more). Not everyone suffers the same co-infections or
manifestations, but there is a core underlying support structure in all cases. So the Protocol is split into two main sections – Core
and Satellites.
Please note that Phase I–terrain in the Core is also highly recommended before tackling any serious condition, including
cancer. In its entirety, Core will deal with those problems that most Morgellons sufferers share. Satellites will then offer further
Programs that are not common to everyone, like different chemical pollutants, viruses and bacteria, moulds, fungi, and parasites.
So you go through the Core, then choose the Satellite Programs most relevant for you. If you prefer, you can add the Satellites to
the ends of each relevant section in the Core instead. In this way, we aim to make the Protocol more targeted for most, although
you can still run all Programs in all Satellites if you wish to be thorough.
The Brine Therapy section augments new frequencies for slime moulds. And Body Knowledge gives techniques you can use to
find out whether you need specific frequency sets, and for how long, and even to find more beneficial sets than those suggested.
We wish you well on your journey back to health.
David Bourke, October 2013/October 2014
1
How it all works
This protocol is designed to be run using four Spooky2–XM frequency generators, since that’s the number we recommend for
optimal treatment of both Morgellons and chronic Lyme. However, you can also do it with fewer generators simply by
proceeding horizontally from left to right rather than vertically in blocks of four, although it must be said that this is indeed a
Herculean task.
Constructing Programs
Search in Spooky2 for each set that makes up the Program. Double click to load it into Spooky2’s Selection Box (bottom right
main screen). Split sets for which all parts must be loaded in the order shown are indicated by “1/2,” “2/2,” etc. at the end of the
name. For example:
Lymphs and Detox 1/2 PROV
Lymphs and Detox 2/2 PROV
Long names may have posssible split set identification numbers hidden in the Conditions List. Select the set to show its full name
in the Additional Notes area beneath the list pane.
The “Apply” Settings
The general rules on frequency wobbles and feathering are: for something that’s non-living, the “Apply” setting should be
“Frequencies Directly” (e.g. metals, pollutants, toxins).
If it’s a living thing, and it belongs naturally in your body, the “Apply” setting should also be “Frequencies Directly” (e.g.
normalise liver, relieve pain, stimulate immune system).
2
If it’s a living thing, and it doesn’t belong naturally in your body, the “Apply” setting should be anything other than “Frequencies
Directly.” This is because living things can mutate over time, thus changing their frequencies slightly, and you need to feather to
catch those mutations (e.g. bacteria, fungi, parasites, viruses).
Research and observation has shown that +- .02% Feathering is generally a good choice for Remote Mode, although other
researchers have reported positive results using Frequencies Directly as well. There are also other excellent choices – see the
Spooky2 Manual section “Feather & wobble.” So please feel free to experiment.
Whichever setting you choose, it’s very important to examine the frequencies you’re running so that you can be aware of what the
setting will do to them. Here are some examples:
Frequency: 1000 (1,000Hz)
Setting 1: +- .02% Feathering.
Result 1: Random from 999.80-1000.20 (range = .4Hz).
Setting 2: Octal Harmonics 12 Stage Wobble.
Result 2: 1000, 2000, 4000, 6000, 8000, 10000, 12000, 10000, 8000, 6000, 4000, 2000.
Frequency: 100000 (100,000Hz)
Setting 1: +- .02% Feathering.
Result 1: Random from 99980-100020 (range = 40Hz).
Setting 2: Octal Harmonics 12 Stage Wobble.
Result 2: 100000, 200000, 400000, 600000, 800000, 1000000, 1200000, 1000000, 800000, 600000, 400000, 200000.
Frequency: 1000000 (1,000,000Hz)
Setting 1: +- .02% Feathering.
Result 1: Random from 999800-1000200 (range = 400Hz).
Setting 2: Octal Harmonics 12 Stage Wobble.
Result 2: 1000000, 2000000, 4000000, 6000000, 8000000, 10000000, 12000000, 10000000, 8000000, 6000000, 4000000,
2000000.
3
The Result 2 frequencies in red above are above the XM generator’s native limit of 5,000,000Hz. This is not a problem for the
vast majority of Programs in this Protocol, but wherever it may become one, additional settings are given for that Program.
This is NOT an à la Carte Menu
This Protocol is designed to be completed in the order given, at least on your first run through. This is because it takes account of
pathogen dependencies and synergy, and is intended to tackle all problems in the most efficient way that’s least problematic for
the sufferer.
When you’ve done the Protocol once, you’re then free to go back and cherry-pick those Steps and Programs you feel worked well
for you, but which may need some additional applications.
But please be aware that you may need to do this many times – this is a very tough disease to beat.
WARNING: you must NEVER run the parts of any split set on separate generators. All split set parts MUST be chained and run
in the correct order on one single generator. Many frequency sets are designed to disrupt organism components in a specific order,
and if you run their frequencies out of that order, the Program may not work.
Satellites
Satellites are best gone through in order (you will see why in the next section). Unlike the Core, you don’t have to run all Steps or
Programs in all Satellites.
Instead, you can use the techniques discussed on page 28 to test for which Programs you may need.
4
The Golden Rule of Rifing
Any living thing that lives in or on you, that consumes your energy or resources, and that confers no benefit upon you in
exchange, is a parasite. This includes insects, fungi, bacteria, and viruses.
It may surprise you to learn that, with the possible exception of viruses, all parasites themselves have their own parasites. Viruses
and spirochaetes can parasitize bacteria. Fungi can parasitize larger fungi. They can also host viruses, bacteria, and insects. And
insects can harbour many different parasites internally and on the surface of their bodies.
Entirely understandably, insect infestation sufferers wish to be rid of their pests the moment they get their hands on a Rife system.
I did this myself – and it brought me a world of nightmare and suffering.
When you kill hundreds of thousands of large parasites like mites (“large” by comparison with bacteria), you’re leaving all their
internal and external parasites alive. When the insect bodies decompose, all those living fungi, bacteria, and viruses are released
into your bloodstream.
And now you’re in big trouble. Since you’ve just killed their hosts of choice, you will have to take their place. You’ve just given
your already-overburdened immune system an enormous number of extra headaches to deal with.
So the rule of rifing is this:
Always work from smallest to largest.
This can also be stated as: work from the inside to the outside, from the things contained to the container itself.
If you proceed like this, you won’t end up in the awful trouble that I did, because when you finally get to kill your biggest
parasites, you should already have killed everything they might have unleashed.
5
Program Durations
According to Dr. Jeff Sutherland’s work, to achieve the same effectiveness as Contact Mode treatment for pathogenic organisms
and parasites, remote Programs must be applied for 10-20 times as long. So a two-hour contact Program would take 20-40 hours
if used remotely.
Our results with the original Spooky Remote v1.0 showed that Program times could be reduced to one-third without any loss of
effectiveness. Since then, we’ve upgraded Spooky Remote to v1.1 by adding a very powerful magnet which increases the EM
field strength by 12,400 times, and we’re confident that this now brings remote treatment very close indeed to contact timings.
However, at least for this version of the Protocol, we’re going to be conservative and play it safe with durations until we’ve
received enough user reports to reduce things any further.
Glossary
Core: Phase/Satellite: this is the task we wish to accomplish – it consists of one or more Steps.
Step (Number): each Step addresses one particular facet of its Phase, and consists of one or more Programs – Steps must be
completed in the correct order.
Program (Number): each Program addresses a specific task in its Step, and consists of one or more Frequency Sets. Initially,
Programs should be applied in the correct order to allow for possible dependencies.
Frequency Set: each Frequency Set targets an exact type of organism, pollutant, or procedure. It consists of one or more
frequencies.
Frequency: the rate at which audio energy vibrates – high numbers are fast, low numbers are slow.
Dwell: the length of time (in seconds) for which the frequency should be transmitted.
6
JW settings 1
These are John White’s recommended
settings for killing living organisms
using any targeted frequency set. Note
that these are updated as of this
version of the Protocol.
These settings are used only when a
Spooky Boost cable is connected to
the generator’s two OUTs.
In the tables, they’re coded “JW1” –
click on the code to come to this page.
Note that appropriate repeat settings
for “Each Set” and “Program” are
given in the tables.
Program durations are calculated using
a Dwell Multiplier of .35.
7
JW settings 2
These are John White’s recommended
settings for detoxification and for
healing.
These settings are used only when a
Spooky Boost cable is attached to the
generator’s two OUTs.
In the tables, they’re coded “JW2” –
click on the code to come to this page.
Note that appropriate repeat settings
for “Each Set” and “Program” are
given in the tables.
Program durations are calculated using
a Dwell Multiplier of .35.
8
DH settings 1
These are David Halliday’s
recommended settings. They can be
used with any frequency set for all
purposes – killing, detox, and healing.
These settings are used only when a
Spooky Boost cable is connected to
the generator’s two OUTs.
In the tables, they’re coded “DH1” –
click on the code to come to this page.
Note that appropriate repeat settings
for “Each Set” and “Program” are
given in the tables.
Program durations are calculated using
a Dwell Multiplier of .35.
9
DH settings 2
These are David Halliday’s
recommended settings. They can be
used with any frequency set for all
purposes – killing, detox, and healing.
These settings are used only when a
single Spooky Remote is directly
connected to OUT 1 of a generator.
In the tables, they’re coded “DH2” –
click on the code to come to this page.
Note that appropriate repeat settings
for “Each Set” and “Program” are
given in the tables.
Program durations are calculated using
a Dwell Multiplier of .35.
10
SSS settings
These are the settings for the dualoutput Spooky Spectrum Sweep.
They are best used when a Spooky
Boost cable is attached to the
generator’s two OUTs with one
Spooky Remote. They will also work
when two Spooky Remotes are
connected.
With one Spooky Remote connected to
OUT 1, you will lose the fine-grained
second sweep from OUT 2, but the
main sweep will still transmit.
In the tables, they’re coded “SSS” –
click on the code to come to this page.
Note that appropriate repeat settings
are given in the tables.
The Dwell Multiplier must be set to 1
for the sweep to work properly.
11
SCS settings
These are the settings for the dualoutput Spooky Converge Sweep.
They are best used when a Spooky
Boost cable is attached to the
generator’s two OUTs with one
Spooky Remote. They will also work
when two Spooky Remotes are
connected.
With one Spooky Remote connected to
OUT 1, you will lose the reversed
second sweep from OUT 2, but the
main sweep will still transmit.
In the tables, they’re coded “SCS” –
click on the code to come to this page.
Note that appropriate repeat settings
are given in the tables.
The Dwell Multiplier must be set to 1
for the sweep to work properly.
12
SMS settings
These are the settings for the dualoutput convergent Morgellons Slime
Mould Sweep.
They are best used when a Spooky
Boost cable is attached to the
generator’s two OUTs with one
Spooky Remote. They will also work
when two Spooky Remotes are
connected.
With one Spooky Remote connected to
OUT 1, you will lose the reversed
second sweep from OUT 2, but the
main sweep will still transmit.
In the tables, they’re coded “SMS” –
click on the code to come to this page.
Note that appropriate repeat settings
are given in the tables.
The Dwell Multiplier must be set to 1
for the sweep to work properly.
13
Core: Phase I–terrain
Step 1 – Detox Mercury
& Heavy Metals
Generator 1
Program 1: metals &
chemicals
1–Mercury Toxicity V
CAFL*
2–Mercury Remove
Settings: JW2/DH2/DH1 XTRA
3–Detox Mercury 1
Repeat Each Set: 4
XTRA
Repeat Program: 30
Time: 30:48:00
Generator 2
Generator 3
Generator 4
1–Heavy Metal Toxicity
XTRA *
2–Heavy Metals CAFL
1–Detox Heavy Metals 1
XTRA
1–Detox Heavy Metals 4
XTRA
2–Detox Fluoride XTRA*
3–Detox Pesticide XTRA
4–Detox Respiratory
XTRA
Time: 32:12:00
Time: 31:30:00
Time: 29:24:00
*Single generator users should run the frequency sets in green text above as one Program, then proceed to Step 2 when done.
Step 2 – Detox Other
Toxins
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4:
systemic, intestinal &
blood
1–Detox Toxins
Elimination 2 1/2 XTRA
2–Detox Toxins
Elimination 2 2/2 XTRA
1–Detox Toxic Proteins
XTRA
2–Detox Toxins
Elimination 1 XTRA
3–Detox 4 Toxins
Throughout The Body
CAFL
1–Detox 1 Toxins In The
Intestines CAFL
2–Detox 2 Parasites in
the Intestines CAFL
1–Lymphangitis CAFL
2–Streptococcus
Pyogenes CAFL
Time: 52:30:00
Time: 47:00:00
Time: 47:18:00
Time: 48:18:00
Settings: JW2/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
14
Step 3 – Organ &
System Support
Generator 1
Programs 1–4: liver,
kidneys
1–Liver 1 PROV
2–Liver 2 PROV
3–Liver Flukes CAFL
Settings: JW2/DH2/DH1 4–Liver Function
Balance XTRA
Repeat Each Set: 4
5–Liver Support CAFL
Repeat Program: 30
6–Liver Function
Stimulate & Normalise
XTRA
Time: 77:42:00
Generator 2
Generator 3
Generator 4
1–Kidney Function
Balance 1/2 XTRA
2–Kidney Function
Balance 2/2 XTRA
1–Detox 3 Toxins In The
Kidneys And Liver PROV
2–Kidney Insufficiency
CAFL
3–Kidney Function
Normalise Stimulate
XTRA
4–Kidney Meridian
Balance/Correct XTRA
1–Lymphs and Detox 1/2
PROV
2–Lymphs and Detox 2/2
PROV
3–Lymph Support CAFL
4–Lymph Function
Stimulate Normal XTRA
5–Lymph Glands
Stimulate XTRA
Time: 77:42:00
Time: 74:24:00
Time: 67:12:00
This completes Core: Phase I–terrain. From here on, you can, if you wish, add the Brine Therapy regimen detailed on page 26 to
start making life difficult for slime moulds. You will also run the following Maintenance Program. In the tables that follow, this is
referred to as “Maintenance,” and will always use the settings indicated below, not those in the tables, so it runs non-stop
throughout the entire Protocol.
Maintenance Program
Run This on Any Generator
Detox: system, liver, kidneys, GI, blood,
lymph
Detox 1 Toxins In The Intestines CAFL
Detox 4 Toxins Throughout The Body CAFL
Detox 3 Toxins In The Kidneys And Liver CAFL
Detox 2 Parasites In The Intestines CAFL
Lymphangitis CAFL
Streptococcus Pyogenes CAFL
Settings: JW2/DH2/DH1
Repeat Each Set: 4
Repeat Program: 0
15
Core: Phase II–organisms
Step 1 – Main
Pathogens
Generator 1
Generator 2
Generator 3*
Generator 4
Programs 1-4: detox,
Staph spp., Strep spp.
Maintenance
1–Staphylococcus
Aureus 1 XTRA
1–Streptococcus
Pneumoniae CAFL
2–Staphylococcus
General 1 CAFL
1–Streptococcus
Infection General CAFL
Time: run non-stop
Time: 37:48:00
Time: 39:54:00
Time: 39:54:00
Maintenance
1–Chlamydia General
CAFL
1–Chlamydia
Pneumoniae 1 CAFL
2–Chlamydia
Pneumoniae 8 XTRA
3–Chlamydia Infections
XTRA
1–Chlamydia
Trachomatis CAFL
2–Colloidal Silver and
Gold Octal CUST
Time: run non-stop
Time: 42:00:00
Time: 42:00:00
Time: 42:00:00
Maintenance
1–Bartonella Henslae
PROV
2–Bartonella Quintana
XTRA
1–Morgellons Bartonella
Henslae Comp CUST
2–Morgellons Bartonella
Rochalimae CUST
3–Babesia PROV
1–Ehrlichia Chaffeersis
PROV
2–Protozoa BIO
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 5–8: detox,
Chlamydia spp. &
viruses
Settings: JW1/DH2/DH1
Programs 9–12: detox,
other co-infections
Settings: JW1/DH2/DH1
*Ensure X value of
waveform is at least 2.
Time: run non-stop
Time: 42:00:00
Time: 39:12:00
Time: 37:48:00
16
Step 1 – Main
Pathogens
Generator 1
Generator 2
Generator 3*
Generator 4
Programs 13–16:
detox, other coinfections
Maintenance
1–Borrelia Spp. Cysts
CUST
2–Fibrosarcoma BIO
3–Ehrlichia Equi PROV
1–Borrelia Burgdorferi
Lyme Disease PROV
2–Borrelia Garinii Lyme
XTRA
3–Borrelia Afzelli Lyme 6
XTRA
1–Mycoplasma
Fermentans Incognitus
1/2 PROV
2–Mycoplasma
Fermentans Incognitus
2/2 PROV
Time: run non-stop
Time: 44:06:00
Time: 42:00:00
Time: 48:18:00
Step 2 – Main Fungi &
Molds
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
fungi & molds spp.
Maintenance
1–Ringworm 1/2 CAFL
2–Ringworm 2/2 CAFL
1–Aspergillus Flavus
CAFL
2–Apergillus Glaucus
CAFL
3–Aspergillus Niger BIO
4–Aspergillus Terreus
CAFL
5–Fungus Black Nail
CUST
1–Epidermophyton
Floccinum CAFL
2–Microsporum Audouini
CAFL
Time: run non-stop
Time: 46:12:00
Time: 40:36:00
Time: 47:36:00
Maintenance
1–Fungus and Mold 1/2
CAFL
2–Fungus and Mold 2/2
CAFL
1–Fungus and Mold 2
XTRA
2–Mold BIO
3–Epicoccum CAFL
1–Mold and Fungus
General CAFL
2–Molds General XTRA
3–Aflatoxin CAFL
Time: run non-stop
Time: 79:48:00
Time: 74:54:00
Time: 75:36:00
Settings: JW1/DH2/DH1
*Gen 3: Dwell Mult = 1
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 5–8: detox,
fungi & molds all
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
17
Step 3 – Morgellons
Disease
Generator 1
Generator 2
Generator 3
Generator 4*
Programs 1–4: detox,
pathogens, slime
moulds
Maintenance
1–Spooky Spectrum
Sweep CUST
1–Spooky Converge
Sweep CUST
1–Morgellons Slime
Moulds Sweep CUST
Settings: JW1/DH2/DH1 Settings: SSS
Settings: SCS
Settings: SMS
Time: run non-stop
Time: run for 48 hours
Time: run for 48 hours
Time: run for 48 hours
Maintenance
1–Morgellons Disease 1
1/3 XTRA
2–Morgellons Disease 1
2/3 XTRA
3–Morgellons Disease 1
3/3 XTRA
1–Morgellons Disease 2
1/3 XTRA
2–Morgellons Disease 2
2/3 XTRA
3–Morgellons Disease 2
3/3 XTRA
1–Morgellons Slime
Moulds 1 CUST
2–Morgellons Chronic
Lesions and Fibres
CUST
3–Morgellons Chronic
Lesions and Fibres
XTRA
4–Morgellons Bartonella
Toxin CUST
5–Morgellons Expeller
CUST
6–Psorinum CAFL
7–Morgellons Skin Itch
CUST
8–Sarcoptes Scabiei Itch
XTRA
9–Itching 1 XTRA
Repeat Each Set: 4
Repeat Program: 0
Programs 5–8: detox,
artefacts, lesions, itch,
slime moulds
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
*Ensure X value of
waveform is at least 2.
Time: run non-stop
Time: 96:36:00
Time: 92:24:00
Time: 92:24:00
18
Step 3 – Morgellons
Disease
Generator 1
Generator 2
Generator 3
Generator 4*
Programs 9–12: detox,
nanotech, chemicals,
parasites
Maintenance
1–Morgellons Smart
Dust CUST
2–Morgellons Silicone
Detox CUST
3–Morgellons Plastics
Detox CUST
1–Morgellons Internal
CUST
2–Morgellons Int and Ext
CUST
3–Colloidal Silver Octal
CUST
1–Morgellons Internal
Parasites XTRA
2–Morgellons Int and Ext
Parasites XTRA
3–Colloidal Silver Scalar
CUST
Time: run non-stop
Time: 52:30:00
Time: 49:00:00
Time: 49:00:00
Step 4 – Simple
Parasites
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
parasites
Maintenance
1–Leishmania
Braziliensis XTRA
2–Leishmania Donovani
XTRA
3–Leishmania Mexicana
XTRA
1–Leishmania Tropica
XTRA
2–Leishmania Virus New
XTRA
3–Leishmania Virus Old
XTRA
4–Trypanosoma Cruzi
(Brain Tissue) XTRA
1–Morgellons
Leishmania Amastigote
CUST
2–Loa Loa XTRA
Time: run non-stop
Time: 37:48:00
Time: 37:48:00
Time: 35:00:00
Maintenance
1–Amoeba General
CAFL
1–Parasites and
Amoebas 4 CUST
1–Colloidal Silver and
Gold CUST
Time: 14:42:00
Time: 12:36:00
Time: 14:00:00
Settings: JW1/DH2/DH1
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 5–8: detox,
parasites, virus mopup
Settings: JW1/DH2/DH1 Time: run non-stop
19
Step 6 – Complex
Parasites
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
insects
Maintenance
1–Scabies CAFL
2–Sarcoptes Scabiei Itch
XTRA
3–Meal Mite XTRA
4–Mite Bird XTRA
5–Mite Follicle XTRA
6–Ornithonyssus Bird
Mite 1 XTRA
7–Ornithonyssus Bird
Mite 2 XTRA
8–Dermatophagoides
XTRA
1–Morgellons Myiasis
CUST
2–Morgellons
Collembola CUST
1–Morgellons
Collembola Sweep
CUST
Time: run non-stop
Time: 42:00:00
Time: 48:18:00
Time: 42:00:00
Maintenance
1–Parasites Roundworm
General 1/2 CAFL
2–Parasites Roundworm
General 2/2 CAFL
1–Parasites
Strongyloides CAFL
2–Parasites
Strongyloides Secondary
CAFL
3–Hookworm CAFL
4–Parasites Whipworm
XTRA
1–Parasites
Helminthosporium CAFL
2–Parasites Filariose
CAFL
3–Parasites Enterobiasis
CAFL
4–Trichinella Spiralis
Muscle XTRA
5–Parasites Trichinosis
CAFL
Time: run non-stop
Time: 50:12:00
Time: 53:54:00
Time: 54:36:00
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 5–8: detox,
worms
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
20
Step 6 – Complex
Parasites
Generator 1
Generator 2
Generator 3
Generator 4
Programs 5–8: detox,
flukes
Maintenance
1–Fasciolopsis Rediae
XTRA
2–Parasites Fasciola
Hepatica Cercariae
XTRA
3–Parasites Clonorchis
Sinensis 1 XTRA
4–Parasites Clonorchis
Sinensis 2 XTRA
1–Parasites Blood
Flukes CAFL
2–Parasites Intestinal
Flukes CAFL
3–Parasites Brain and
Spinal Flukes CAFL
4–Parasites Fasciola
Hepatica Eggs XTRA
1–Parasites Liver Flukes
CAFL
2–Parasites Pancreatic
Flukes CAFL
3–Parasites Lymph
Flukes CAFL
4–Parasites Fasciola
Hepatica Miracidia 1
XTRA
Time: run non-stop
Time: 42:00:00
Time: 44:06:00
Time: 44:06:00
Maintenance
1–Parasites General
Comprehensive 1/2
CAFL
2–Parasites General
Comprehensive 2/2
CAFL
1–Parasites General
Flukes 1/2 CAFL
2–Parasites General
Flukes 2/2 CAFL
1–Spooky Spectrum
Sweep CUST
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 9–12: detox,
all parasites &
pathogens
Repeat Each Set: 4
Repeat Program: 30
Settings: JW1/DH2/DH1 Settings: JW1/DH2/DH1 Settings: SSS
Time: run non-stop
Time: 65:06:00
Time: 46:12:00
Time: Run for 64 hours
This completes Core: Phase II–organisms.
21
Satellite 1: chemicals
From here on, please proceed through these Satellites in order. You don’t have to do all Programs (you can if you wish), but you
should use the information in “Body Knowledge” on page 28 to identify those which will be beneficial to you, and to find the
number of times you need to run them.
Step 1 – Detox &
Reprogram
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
aerosols, reduce
sensitivity
Maintenance
1–Chemtrail Detox-1/2
CAFL
2–Chemtrail Detox-2/2
CAFL
1–Detox Chemtrail 2
XTRA
2–Chemical SprayRelated Illness XTRA
1–Multiple Chemical
Sensitivity KHZ
2–Chemical Sensitivity
CAFL
3–Detox Chemical
Sensitivity XTRA
4–Pesticide Detox CAFL
Time: run non-stop
Time: 66:30:00
Time: 44:06:00
Time: 37:48:00
Settings: JW2/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Satellite 2: pathogens
Step 1 – Viral
Pathogens
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
viruses
Maintenance
1–Tuberculosis Virus
Form CAFL
2–Virus General 4 CUST
1–Minerals – Platinum
CUST
2–Retrovirus Variants
CAFL
1– Borrelia Hatchlings
and Eggs XTRA
Time: run non-stop
Time: 41:18:00
Time: 23:48:00
Time: 25:12:00
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
22
Step 2 – Bacterial
Pathogens
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
bacteria
Maintenance
1– Borrelia Spirochete
Inhabited Microbes 1/2
XTRA
2– Borrelia Spirochete
Inhabited Microbes 2/2
XTRA
1–Rickettsia 1 XTRA
2–Acne 2 CAFL
3–Acne Vulgaris CAFL
1–Bacterial Capsules 1
XTRA
2–Bacterial Capsules 2
XTRA
3–Heliobacter Pylori
CAFL
Time: run non-stop
Time: 53:54:00
Time: 39:54:00
Time: 46:54:00
Maintenance
1–Acne 1 1/2 CAFL
2–Acne 1 2/2 CAFL
1–Propionibacterium
Acnes 1 XTRA
2–Propionibacterium
Acnes 3 XTRA
1–Propionibacterium
Acnes 2 XTRA
2–Propionibacterium
Acnes 4 XTRA
Time: run non-stop
Time: 48:18:00
Time: 30:48:00
Time: 26:36:00
Maintenance
1–Pseudomonas
Aeruginosa Wound
CUST
2–Pseudomonas Mallei
CAFL
1–Pseudomonas
Fluorescens CAFL
2–Pseudomonas
Pyocyanea CAFL
1–Enterobacter
Aerogenes 1 XTRA
2–Enterobacter
Aerogenes 2 XTRA
3–Minerals – Sulfur
CUST
Time: run non-stop
Time: 27:18:00
Time: 20:18:00
Time: 23:48:00
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 5–8: detox,
bacteria
Settings: JW1/DH2/DH1
Programs 9–12: detox,
bacteria
Settings: JW1/DH2/DH1
23
Satellite 3: fungi
Step 1 – Various Fungi
& Molds
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
fungi & molds
Maintenance
1–Mold Cytochalasin 1
XTRA
2–Mold Cytochalasin 2
XTRA
3–Mold Ergot XTRA
4–Mold Griseofulvin
XTRA
5–Mold Lycogala XTRA
6–Mycogone Fungoides
CAFL
7–Microsporum Canis
VEGA
1–Epidermophyton
Floccinum CAFL
Program as desired
Time: run non-stop
Time: 35:42:00
Time: 33:36:00
Step 2 – Internal Fungi
& Molds
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
skin, eye, lung fungi
Maintenance
1–Cladosporium Fulvum
CAFL
2–Eye Fusarium General
XTRA
3–Fusarium Oxysporum
CAFL
1–Mucormycosis CAFL
2–Mucor Racemosus
CAFL
3–Mucor Racemosus
Sinus VEGA
4–Mucor Mucedo CAFL
5–Mucor Plumbeus BIO
6–Alternaria Tenuis
XTRA
1–Botrytis Cinereas
XTRA
2–Histoplasmosis XTRA
Time: run non-stop
Time: 38:30:00
Time: 39:54:00
Time: 45:30:00
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
24
Satellite 4: parasites
Step 1 – Simple
Parasites
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
protozoans
Maintenance
1–Toxoplasma Special
ODD
2–Toxoplasmosis BIO
3–Protomyxzoa
Rheumatica CUST
1–Leishman Donovan
Bodies CAFL
2–Besnoitia 1 XTRA
3–Besnoitia 2 XTRA
1–B Coli Rod XTRA
2–Balantidium Coli Cysts
1 XTRA
3–Balantidium Coli Cysts
2 XTRA
Time: run non-stop
Time: 40:36:00
Time: 23:48:00
Time: 42:00:00
Maintenance
1–Giardia CAFL
2–Giardia Parasites
Lamblia XTRA
Program as desired.
Program as desired.
Time: run non-stop
Time: 23:48:00
Step 2 – Complex
Parasites
Generator 1
Generator 2
Generator 3
Generator 4
Programs 1–4: detox,
worms
Maintenance
1–Parasites Capillaria
Hepatica XTRA
2–Capillaria Hepatica
XTRA
3–Heartworms CAFL
Program as desired.
Program as desired.
Time: run non-stop
Time: 30:48:00
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
Programs 5–8: detox,
protozoans
Settings: JW1/DH2/DH1
Settings: JW1/DH2/DH1
Repeat Each Set: 4
Repeat Program: 30
25
Morgellons: slime moulds
A number of different species of slime moulds called Dictyostelids have been positively identified in Morgellons. Because these
organisms have the ability to mutate spontaneously, this means that they can be difficult to deal with using Rife. This is because
when something mutates, its frequency also mutates.
However, thanks to long-time Rife user and researcher DB, we now have a adjunctive regimen that helps a great deal. It’s called
Brine Therapy, and it works by dehydrating the individual amoebas that make up slime moulds. But please note that you mustn’t
do this until you’ve completed all of Core: Phase I–terrain because your liver and kidneys must first be fully functional.
There are two parts to this protocol which you will alternate. For the first part, you need Himalayan Pink Salt (not sea or table
salt) and pure drinking water. Here’s how you proceed:
If your salt is small grain (already ground): use one part salt by volume to three parts pure drinking water. If you use large
chunks, you can weigh them and the water, and use the same 3:1 ratio. This gives you 25% brine (26% is saturated, which is
fine). Or you simply make sure you use enough salt so that a little never dissolves – that way you know for sure you have a 26%
solution.
Four milliliters of brine yields just about one gram of salt.
Always dilute your brine into pure drinking water or else be ready to chase it immediately with something else because
straight brine can close your throat.
Start with four grams a day of salt a day (16ml brine) and work up to 16-20 grams a day (64-80ml of brine). Anything over that
starts to get really dangerous, so please don't overdo it. Space your dose out through the day – you don’t have to do it all in
one go. The idea is to keep your serum salt levels high throughout.
Everyone has different tolerance levels, so you’ll need to monitor your body and your urine carefully. If you add two grams of
salt per day until your reach the 16 gram level, it will take a week. But you may need to add just one gram a day if you’re very
26
salt-sensitive. The key is to watch urine output, listen to what your body is telling you, and use your intuition and common sense.
At all times while doing this, drink lots of pure water to flush your system. Be on the alert for kidney or liver problems. If you
come across trouble, immediately stop doing Phase II – terrain and the Brine Therapy and rerun the first three liver and kidneys
Programs from Step 3 Organ & System Support of Phase I–terrain for 24-48 hours each. Then you should be able to resume
Phase II – organisms and the Brine Therapy.
Note that your urine will be odorous for a time.
You can learn more about Brine Therapy here:
http://www.life-enthusiast.com
Once you’ve reached the 16-20 grams a day (64-80ml of brine) level, three or four days of it will kill a lot of the colonies, but
some will encyst and be impervious to brine.
This is where the second part of the protocol comes in – for this you need raw apple cider vinegar “with mother.” The enzymes in
the “mother” will attack the cysts so that the colonies are again forced out into the open. Because they are under huge
environmental pressure, they will immediately enter a phase of explosive growth.
Listen carefully to what your body is telling you and you’ll know when this happens. Then immediately switch back to the Brine
Therapy at the 16-20 grams a day (64-80ml of brine) level and suspend the enzymes.
Again, listen to your body and revert to the apple enzymes when activity goes quiet and colonies have encysted once again. By
switching back and forth between brine and apple enzymes, you will eventually kill all your Dictyostelids.
The recipe for the enzymatic part is as follows:
One tablespoon of raw unpasteurised apple cider vinegar mixed into about 6-8oz of freshly-made apple juice. If you don’t have a
juicer, you can simply eat a small apple (preferably organic) as a chaser for the undiluted vinegar.
27
Morgellons: body knowledge
If you’ve used Spooky2 for any length of time, you will by now have no doubt that it works. But I’m willing to bet that when you
first learned about it, your initial reaction was one of utter disbelief. Treat yourself remotely by using your fingernail? Pull the
other leg!
I know that was my own reaction – until I investigated the quantum physics concept of nonlocality. But what exactly is
nonlocality? It’s everything that lies outside the observable, measurable universe. In other words, beyond the ability of our
limited human senses (and our machine extensions of them) to recognise.
Nonlocality is everywhere – we just can’t see it, or measure it. Max Planck, the father of quantum physics, said it was an
intelligent mind. Carl Jung discovered a subset of it and called it the collective unconscious.
Since it contains and permeates everything in the universe, and since everything is energy – including thought – then it also
contains all knowledge possible. About absolutely everything. Dowsers have used this fact for many milennia to find water – they
call nonlocality “The Field.”
No doubt you’ve probably seen a dowser at work, walking around a field holding a forked stick that points to the spot where he
finds water. So what’s going on?
There’s no magic or hoodoo involved. The dowser simply asks “The Field” for the location. The movement of the device he’s
using guides him to it and points it out. But how does the device know?
It doesn’t – the dowser moves it herself, but is unaware that she’s doing so. Here’s how that works:
When you want to lift something, you consciously think about it, your brain sends a signal to your arm muscles, and you lift it.
But your heart is a muscle, too – yet you don’t have to consciously make any effort to force it to beat. That’s because it, like many
other organs and processes in your body, is not controlled by conscious thought but by an automatic mechanism called the
autonomic nervous system.
28
The control centre for this system is your subconscious mind.
So our dowser asks the question, “Is there water within 500 yards?” If there is, “The Field” responds “Yes.” Not by using
language, but by using energy. The conscious mind cannot detect this, but the subconscious mind can because the pineal gland is
under its control – and our pineal glands connect every one of us to nonlocality.
The subconscious then sends tiny nerve impulses via the autonomic nervous system to our dowser’s arms and hands to make the
device move. This is the “Yes” answer translated by the subconscious from subtle energy into a human-readable language.
The dowser then keeps asking further questions and moving in accordance with the answers until the water source is found. She
can then ask how deep it is, whether it’s potable, and even what its mineral contents by percentage are.
Essentially, our dowser isn’t really dowsing for water as a substance, but for the knowledge of where water can be found. So
dowsers don’t really seek for things, but rather for situational information about things.
Wild animals can always find water. Not by smell, because water has no scent, but because they’re using their own natural
“dowsing” system. Conventional science prefers to call this “instinct.”
All humans can dowse. They just don’t realise it because the direction taken by civilisation has caused the vast majority of us to
forget it – who needs to go seek water when there’s a communal spring or well in the village? But dowsers have preserved the
knowledge and skills that the rest of us have allowed to lie fallow.
Muscle testing, also called applied kinesiology, is also a form of dowsing, except that it uses the body as its dowsing device rather
than a forked stick or a pendulum.
And you can use either pendulum dowsing or muscle testing to find the answers you seek to questions like “Do I need to use this
(named) frequency set in Spooky to help treat my Morgellons?” And then, “Do I need to run this set for more than three (or five,
or seven) days?”
29
Note that unless you’re an experienced dowser, your questions should always be framed simply and unambiguously so that they
can be answered by a “Yes” or “No.”
Although neither dowsing nor muscle testing depend on your beliefs, it is an extraordinary fact that they are both inherently
moral. That is, they can only be used to benefit yourself or others, never to harm. And both are intimately connected with truth –
muscle testing in particular will expose a lie quicker than any polygraph.
Finally, lest you entertain any doubts about this subject, the frequencies that killed my systemic infestation of demodex mites in
six days were dowsed for by eminent physicist and Rife researcher Dr. Jeff Sutherland – I was unaware of this at the time.
And some of the Programs and frequency sets in this Protocol and in the Spooky2 database were dowsed for by three seasoned
Rife users, one of whom is a professional dowser. Two of them also helped to find and refine technical information which has
helped to make the Spooky2 system even more powerful.
Learning to Dowse
Space does not permit me to teach you in this document. But you will find a simple technique outlined on this page of my
website. There are also many links to freely downloadable learning materials and information from far better teachers than I.
Learning to Muscle Test
Muscle testing can either involve you (the testee) and another person (the tester), or it can just involve you alone. I encourage you
to learn the one-person technique first. That way, you can always get the information you need at any time or place.
First, watch this incredible short video.
You can learn six muscle testing techniques at Tessa Casson’s website here.
Watch a dog owner choose the correct remedy from 100 for a sick dog using the technique I personally find easiest and best here.
30
The best book on muscle testing is “Your Body Doesn’t Lie,” by Dr. John Diamond. You can get it in paperback for about $6
from Amazon.
Here’s a search list of YouTube videos on muscle-testing. And here’s a search list of videos using the sway technique.
Tips for Dowsing and Muscle Testing
๏ Since we’re dealing with energy and conductivity in the body, you must be well hydrated and have adequate mineral levels.
๏ In the home, turn off and unplug all electrical appliances in the room before starting.
๏ Even better, do it outdoors barefoot on grass, earth, or stone paving (not cast, moulded, or concrete). This way, you’ll be
electrically grounded to the earth.
๏ Prejudge nothing – you must be open to the answers you will receive, not seek to have them confirm your own wishes and
desires.
๏ Use these techniques for everything in your life – testing supermarket foods, supplements, interpersonal situations. The more
you do it, the better you get.
๏ Believe in yourself – you’re more powerful than you know.
31
Thanks go to:
John White
All our Morgellons Disease research volunteers
Johann and Tania Stegmann
The Spooky Team
Nancy Sliwa
Gwen Burley
DB (DaddyBob)
David Halliday
Spooky2 Forum Members (you know who you are)
Dr. Nenah Sylver (for 40,000Hz)
Michael Tigchelaar (for starting the ball rolling)
Jim Beach (shine on…)
And Morgies everywhere for bearing their suffering with dignity and grace
Tiocfaidh ár lá!
David Bourke – October 2013/October 2014
32