1. No category

Slayer Brothers
Parts Catalog
2015
Where we cut prices not quality
Catalog 2015-1
This catalog supersedes previous catalogs
Slayer Brothers, LLC
P.O. Box 75
Moose Lake, MN 55767
sales@slayerbrothers.com
www.slayerbrothers.com
http://slayerbrothers.blujay.com/
218-409-9116
888-249-0220
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved. Updated 1/24/15
INDEX
1. INDEX
Section A. Door & Hatch Hardware
3-4. Handles – EXTERIOR & INTERIOR
5-7. Cab Latches
8. Hinges & Holders
9. Miscellaneous
Section B. Wiper Motors, Blades & Hardware
11-12. Wiper Motors
13. Wiper Parts & Window Washer Kits
14. Wiper Arms
15. Wiper Blades
16. Manual Windshield Wiper
Section C. Electrical
18. Lights & Switches
19. Radios & Radio Housings
20. HVAC
Section D. Rubber & Vinyl Parts
22. Door Molding & Headliner
23. Window Molding & Parts
Section E. Helpful Data / Data Guide
25-30. Line Drawings
31. Wiring Diagrams – Wipers
32. About Us - FAQ
TERMS
Payment:
We accept PayPal, Visa, MasterCard, Discover, COD and company check.
Shipping:
Parts shipped UPS, USPS and common carrier. Part prices do not include shipping except when noted.
Returns:
No returns without prior authorization. No returns on special order items, sale items or electrical parts.
MISCELLANEOUS:
Slayer Brothers, LLC is not responsible for nondelivery or delay in delivery due to delays, damages or losses
resulting from strikes, riots, fires, floods, or other accidents or occurrences beyond their control. Prices are
subject to change without notice. Newest catalog version supersedes all others.
DRAWINGS: All drawings and dimensions shown on this website are for reference only.
To order, please contact:
218-409-9116 or 888-249-0220
sales@slayerbrothers.com
www.slayerbrothers.com
Page 1
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/23/15
Section A
Door & Hatch
Hardware
You can now buy many of our parts online day or night!
http://slayerbrothers.blujay.com
www.slayerbrothers.com
Page 2
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HANDLES Exterior
NL1 Non-locking exterior door handle. Features a
$16.95 each
chrome finish, 5/16” shaft and 1 ¾” bolt hole spacing.
CASE part number 3113466R91.
Same as GD302 handle.
L1 Locking exterior door handle. Features a chrome
finish, 5/16” shaft, 1 3/4” bolt hole spacing and two
keys. CASE part number F93131 and D88771.
Same as GD303 handle.
$16.95 each
PLZN Padlock locking exterior door handle. Features $20.95 each
a 5/16” shaft and hole for padlock. Zinc finish. Same
as 5655ZN handle.
Drawing available in Data Section.
DHG1 Gasket. Exterior gasket for NL1 and L1
exterior handles.
Page 3
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
$1.95 each
Updated 1/24/15
HANDLES Interior
354-I Inside door handle. Features chrome finish and
Allen locking screw. Fits all 5/16”, 44mm or .31
shafts. CASE part number F63925.
Same as I8002.
$9.95 each
74-I Inside door handle. Features chrome finish, Allen $16.95 each
locking screw and large curved design for better grip
when pulling the door shut. Fits all 5/16”, 44mm or
.31 shafts. Replaces CASE #E83236.
200-I Inside handle. Features chrome finish, Allen
$5.95 each
locking screw and compact design. Small inside
handle is perfect for windows, hatches, panels or halfdoors. It's 3 1/2” long so a little small for a full-sized
door. Fits all 5/16”, 44mm or .31 shafts.
$16.95 each
D88773 Inside door handle. Fits CASE brand doors
that use the D88773 inside handle. Accepts a 5/16”
square shaft outer handle. No longer in production so
we are one of the few companies that have them.
Drawing available in Data Section.
DHG1 Gasket. Exterior gasket for NL1 and L1
exterior handles and D88773 interior handle.
Page 4
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
$1.95 each
Updated 1/24/15
CAB LATCHES – Part 1
55-LH Cab Latch. The 55 cab latch is the most
common latch used. Case dimensions are roughly
2”x3 3/8”. Zinc finish. Left hand shown.
CASE / IH part number is F93204
Drawing available in Data Guide section.
$19.95 each
55-RH Cab Latch. The 55 cab latch is the most
common latch used. Case dimensions are roughly
2”x3 3/8”. Zinc finish. Right hand shown.
CASE / IH part number is F93203
Drawing available in Data Guide section.
$19.95 each
58-LH Cab Latch. The 58 cab latch is identical to the $13.95 each
55, except you need an inside handle. This gives the
58 more versatility. It can also be used without an
inside handle as a panel latch. Case dimensions are
roughly 2”x3 3/8”. Zinc finish. Left hand shown.
58-RH Cab Latch. The 58 cab latch is identical to the $13.95 each
55, except you need an inside handle. Replaces
WHITE and MF part # 30-3305945, and 731761. Case
dimensions are roughly 2”x3 3/8”. Zinc finish. Right
hand shown.
55A-LH Cab Latch. The 55A cab latch is the larger
version of the 55. Case dimensions are roughly
2 3/8”x4 3/8”. Zinc finish. Left hand shown.
$31.95 each
Drawing available in Data Guide section.
55A-RH Cab Latch. The 55A cab latch is the larger
version of the 55. Case dimensions are roughly
2 3/8”x4 3/8”. Zinc finish. Right hand shown.
$31.95 each
Drawing available in Data Guide section.
Not sure if you have a Left or Right hand latch? Need exact measurements?
Visit our helpful data section at the end of this catalog for more detailed information.
Page 5
Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved.
Updated 1/24/15
CAB LATCHES – Part 2
SL1448 Cab Latch. This latch is identical to the 55
series latches except it has a flange on the end. These
were used in many vintage tractor cabs. Also sold
under VLD1448.
$20.95 each
Drawing available in Data Guide section.
SL1449 Cab Latch. This latch is identical to the 55
series latches except it has a flange on the end. These
were used in many vintage tractor cabs. Also sold
under VLD1449.
$20.95 each
Drawing available in Data Guide section.
58-CASE Cab Latch. The 58-CASE cab latch
$25.95 each
replaces Case part number F98122 and F89710. I have
also used it to replace CASE part number F93107.
Dimensions are roughly 2”x3 3/8”. Zinc finish.
Drawing available in Data Guide section.
$25.95 each
9015 Paddle Handle Latch. Features a key lock, inside
handle with override. Has four mounting holes. Case
dimensions are roughly 3 5/8”x4 3/4”. Polished
stainless steel. Includes inside knob.
Drawing available in Data Guide section.
4901 Paddle Handle Latch. Features a key lock and
inside knob. Case dimensions are roughly
4 1/4”x5 1/2”. Unpolished stainless steel. Rubber
gasket available.
$25.95 each
Drawing available in Data Guide section.
$35.95 each
I-4901 Paddle Handle Latch. Features a key lock and
inside override handle. Case dimensions are roughly
4 1/4”x5 1/2”. Zinc finish. Rubber gasket available.
Drawing available in Data Guide section.
Not sure if you have a Left or Right hand latch? Need exact measurements?
Visit our helpful data section at the end of this catalog for more detailed information.
Page 6
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
CAB LATCHES – Part 3
G-4901 Gasket. Rubber gasket to fit the 4901 and the $5.95 each
I-4901 paddle handle.
STR-1 Strike plate. Two position strike plate offers
$5.95 each
greater safety cab latches and paddle latches. (Not for
rotary latches.) Has slotted holes for adjustment.
11442-16LH Rotary Cab Latch. Also sold as 10374- $44.95 each
15-30 and CASE R55001. Left hand shown. Complies
with FMVSS 206 when tested with approved striker.
NSN #2540012478640
Drawing available in Data Guide section.
11443-16RH Rotary Cab Latch. Also sold as 600518
and CASE R55000. Zinc finish. Right hand shown.
Complies with FMVSS 206 when tested with
approved striker. NSN #2540012478641
$44.95 each
Drawing available in Data Guide section.
R55002 Rotary Cab Latch. Factory CASE NH part
number R55002. Replaces F44925, 47109305,
4495165, 254177A1, 44995165 and 302660A1. Fits
many of the new dozers and the W14B. Zinc finish.
NSN #2540013298572.
$44.95 each
R55003 Rotary Cab Latch. Factory CASE NH part
$44.95 each
number R55003. Fits many of the new dozers and the
W14B. Zinc finish.
NSN#2540012993988
10646-16 Striker bolt. Approved striker bolt for
11442-16LH, 11443-16RH, R55002 and R55003
latches.
$11.95 each
Not sure if you have a Left or Right hand latch? Need exact measurements?
Visit our helpful data section at the end of this catalog for more detailed information.
Page 7
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HINGES & HOLDERS
120G 120mm weld-on hinge with grease zerk.
$10.95 each
See Data section for mounting options.
120W Replacement washer.
$1.95 each
150G 150mm weld-on hinge with grease zerk.
$15.95 each
See Data section for mounting options.
150W Replacement washer.
$1.95 each
Other sizes and styles available by special order.
35SS Stainless steel cane bolt. Can be used for left or $21.95 each
right side mounting. Perfect for holding doors, panels
or windows. Base is 3.5” long.
5602.5ZN Heavy duty door holder. Spring loaded, all $39.95 each
metal door holder with grease zerk. For holding doors
open against the side of the cab.
Drawing available in Data Guide section.
PDH-S Steel door stop/holder. Comes with both
$10.95 each
pieces and the rubber insert. Silver in color. Has less
holding power than the 5602 holder. Similar to factory
Case holder.
RDS-238 Rubber door stop. 2 3/8” long with 3/8”
stud. Comes with nut and washer.
Page 8
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
$12.95 each
Updated 1/24/15
MISCELLANEOUS
Page 9
13X5SS Polished stainless steel grab handle. Perfect
for cab door or wall post. 1/2” diameter by 13.25”
long. Has 4 mounting holes. It's nice!
$19.95 each
MCR Switch mounting cup. Allows you to install a
switch into the dash with access to the wiring. Makes
putting a switch into a dash panel easy work.
$6.95 each
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
Section B
Wiper Motors, Blades
& Hardware
You can now buy many of our parts online day or night!
http://slayerbrothers.blujay.com
The unwise man
is awake all night
worries over and again.
When morning rises
he is restless still,
his burden as before.
- The Havamal (Book of Viking Wisdom)
www.slayerbrothers.com
Page 10
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
WIPER MOTORS - 1
Universal 2-Speed 12 Volt Wiper Motor
Marine grade 12 volt 2-speed wiper motor features an adjustable wipe angle and will park to the right
or left. Wiper switches available on the switch page. Uses 1/2” drum arms. This wiper motor was used
on a wide variety of OEM equipment and aftermarket cabs. It also replaces WEXCO and AFI wiper
motors. This is a “famous maker” wiper motor we purchased directly from the factory to save you
money! Note: 2” and 3” shafts available by special order.
4R1.12 / 12 volt 2-speed wiper motor with 1” shaft
$79.95 each
Universal 2-Speed 24 Volt Wiper Motor
24 volt 2-speed wiper motor features an adjustable wipe angle and will park to the right or left. Shaft
length is 1 1/2”. Wiper switches available on the switch page. Uses 1/2” drum arms. Order arms,
blades and switches on the next page. This wiper motor was used on a wide variety of OEM
equipment and aftermarket cabs. It also replaces WEXCO and AFI wiper motors. This is a “famous
maker” wiper motor we purchased directly from the factory to save you money! Note: 2” and 3”
shafts available by special order.
K4R1.24 / 24 volt 2-Speed wiper motor with 1 1/2” shaft.
$79.95 each
Detailed wiper motor information is available in the Data Guide section.
Switches available in the Electrical Section.
Page 11
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
WIPER MOTORS - 2
WWJ3 Wiper Motor Kits 12 & 24 Volt
2-speed wiper motor kits. Comes with the motor bracket, connecting link, clips, nuts and screws as
shown. Available in 12 or 24 volt. Adjustable wipe angle. Park to right or left. Uses 3/8” arm spline.
Order cranks, pivot shafts, arms, blades, switches and washer kits on the following pages.
Detailed wiper motor information is available in the Data Guide section.
KMB131 / 12 volt kit
$ 98.95 each
KMB132 / 24 volt kit
$105.95 each
Marine Wiper motor 12 volt
MHD12-1 Universal 12V 2-speed Heavy Duty Marine Wiper Motor with 1" shaft and sealed cover.
Interchangeable Sweep Angles of 83-100-110-and 120 Degrees. Self-Parking. Perfect for marine use
or for open cabs in wet or snowy environments. Uses wiper arms for 1/2” drum motors. Order arms,
blades, switches and washer kits on the following pages.
MHD12-1
Page 12
$95.95 each
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
WIPER PARTS
Parts for WWJ3 Wiper Motors
300795 1.25” Pivot Shaft $23.95 each
308-1005 Drive Arm Kit
$24.95 each
Note: Other shaft lengths and drive arms are available by special order.
200241 Pantograph Adapter. 1.25” WMC1 Wiper motor cover that fits all Wexco, AFI and other
center to center pivot distance
wiper motors. Gives your dash a cleaner look. $25.95 each
$12.95 each
Windshield Washer Parts
12WS Washer Kit / 12 Volt
$25.95 each
24WS Washer Kit / 24 Volt
$25.95 each
1.5 liter bottle with pump and mounting bracket
Page 13
WK1 Wet Kit
$11.95 each
Converts your dry wiper arm to a wet arm.
May vary from photo shown
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
WIPER ARMS
For 1/2” Drum Splines
Fits many factory motors plus Wexco, Bosch and AME using the 1/2” drum.
Adjustable radial arm with J-hook end. Length and end section adjusts for a perfect fit.
Uses our Universal Wiper Blades.
200717D 14”-18” Radial Arm
$19.95 each
200718D 20”-24” Radial Arm
$24.95 each
Adjustable pantograph arm with 13.6mm saddle end. Length adjusts for a perfect fit.
Uses our OEM Wiper Blades. No adapter needed!
200715D 14”-18” Panto Arm $29.95 each
200716D 20”-24” Panto Arm $34.95 each
For Double Flat Shaft with 3/8” Tapered Spines
Fits bracketed style wiper motors, UT/JE, Bosch, WEX, J3, etc.
201559 16” Radial Dry
$25.95 each
201562 22” Radial Dry
$28.95
201560 18” Radial Dry
$26.95 each
201563 24” Radial Dry
$30.95
201561 20” Radial Dry
$27.95 each
200461 16” Panto Dry
$39.95 each
200464 22” Panto Dry
$42.95 each
200462 18” Panto Dry
$40.95 each
200465 24” Panto Dry
$43.95 each
200463 20” Panto Dry
Page 14
$41.95 each
200467 28” Panto Dry
Other sizes available by special order. Wet kits available.
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
$44.95 each
Updated 1/24/15
WIPER BLADES
Narrow Saddle Mount Blades
Fits .200 and .250 width arms used on many older tractors.
N14 14” Blade
$10.95 each
N16 16” Blade
$11.95 each
N18 18” Blade
$12.95 each
Other sizes available by special order
OEM - 13.6 mm Saddle Mount Blades
Fits 13.6mm width arms used as OEM on trucks, buses and newer heavy equipment.
13416 16” Blade
$10.95 each
13422 22” Blade
$15.95 each
13418 18” Blade
$11.95 each
13724 24” Blade
$17.95 each
13420 20” Blade
$12.95 each
13728 28” Blade
$18.95 each
Other sizes available by special order
Universal Mount Blades
Fits a variety of mounts including J-hook.
UNV16 16” Blade
$8.95 each
UNV24 24” Blade
$10.95 each
UNV18 18” Blade
$8.95 each
UNV26 26” Blade
$10.95 each
UNV20 20” Blade
$8.95 each
UNV28 28” Blade
$10.95 each
UNV22 22” Blade
$8.95 each
Other sizes available by special order
Washers, wet kits, switches and wiper motors are available
Page 15
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
MANUAL WINDSHIELD WIPER
Manual Wiper with Pantograph Arm
Includes:
16” Panto Arm
16” Blade
Inside Chrome Handle
All attaching hardware
$98.95 each
Replacement Wiper Blade
$10.95 each
Replacement Wiper Arm
$39.95 each
Replacement Inside Handle
$16.95 each
You asked for it, and here it is. The only pantograph manual wiper in the industry. Designed
specifically for use in hazardous environments where electric motor driven wipers aren't allowed. The
dual arm wiper provides maximum window coverage with minimal effort.
A Slayer Brothers exclusive and patent pending.
Page 16
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
Section C
Electrical
You can now buy many of our parts online day or night!
http://slayerbrothers.blujay.com
Bare is his back who has no brother.
- Grettir's Saga
www.slayerbrothers.com
Page 17
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
LIGHTS & SWITCHES
S1-12 12 volt 3”x5” 55 watt halogen light.
Replaceable H3 bulb. With mounting hardware.
$25.95 each
S1-24 24 volt 3”x5” 70 watt halogen light.
Replaceable H3 bulb. With mounting hardware.
$35.95 each
H3-12 12 volt replacement H3 bulb, 55 watt.
$ 4.95 each
H3-24 24 volt replacement H3 bulb, 70 watt.
$ 6.95 each
311-2 Round wiper switch. For one or two 12 volt or
24 volt wiper motors. Includes washer position.
$28.95 each
Wiring information in Data section.
RS1 Lighted Rocker Switch. For one or two 12 volt or $25.95 each
24 volt wiper motors. For 24 volt you must use a 600
ohm resistor to keep the internal LED light from
burning out.
Wiring information in Data section.
WS1 Lighted Washer Switch. For 12 volt or 24 volt
washer pumps. For 24 volt you must use a 600 ohm
resistor to keep the internal LED light from burning
out.
$19.95 each
Wiring information in Data section.
WMS Wiper motor switch. This 2-speed switch
attaches directly to your Wexco, AFI or Slayer
Brothers wiper motor. For 12 or 24 volt motors.
(Wiper motor not included)
$19.95 each
Wiring information in Data section.
SS1224 Universal Push Button Starter Switch. Rated $11.95 each
for 60 amps at 12 volts and 24 amps and 24 volts. Fits
a 5/8” hole with a panel thickness of up to 1/2”. Same
as John Deere AT25258.
Page 18
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
RADIOS & HOUSINGS
76 Series Radio Housing. This roof mounted housing $75.95 each
comes complete with heavy duty speakers for
industrial use. Perfect for tractor, dozer or any heavy
equipment cab. Just add your own radio and external
antenna. Accepts DIN style radios (without knobs).
76-25 Roof Mounted Radio - Complete
AM/FM Stereo CD Player
MP3, USB & SD card ready
52W x 4 maximum power output
CD-R compatible
High-speed audible track search
8x oversampling
Anti-shock mechanism
30 station presets (18 FM / 12 AM)
Preset scan, one-touch memory
5 selectable EQ curves
Two heavy-duty stereo speakers
Universal mounting
Antenna and hardware included
1/4" headphone jack
Dimensions: 21 3/4" x 2 3/4" x 9" (WxHxD)
$259.95 each
New Lower
Price!
77 Radio Housing. Rooftop or under dash housing
$19.95 each
holds 2-shaft and DIN radios or can be used to house a
CB radio.
Page 19
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HVAC
12 volt high quality 7” fan with built-in switch
2 speeds
All metal construction
.6 amp on low, .9 amp on high
$35.95 each
24 volt high quality 7” fan with built-in switch
2 speeds
All metal construction
.6 amp on low, .9 amp on high
$45.95 each
12 & 24 volt cab heaters.
We are currently working to add cab heaters for 12
and 24 volt systems.
Page 20
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
Section D
Rubber & Vinyl Parts
You can now buy many of our parts online day or night!
http://slayerbrothers.blujay.com
Ill it is when men, with smooth talk, sidestep what is just and good.
- Heitharvega Saga
www.slayerbrothers.com
Page 21
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
DOOR MOLDING & HEADLINER
ST-5/8 Straight bulb seal with 5/8” diameter bulb.
Fits 12-16 gauge panel or lip. This is the most
common size of bulb seal used to seal doors and
panels requiring a straight seal.
$2.95 per foot
90-5/8 90° bulb seal with 5/8” diameter bulb.
Fits 12-16 gauge panel or lip. This is the most
common size of bulb seal used to seal doors and
panels requiring a 90° seal.
$2.95 per foot
Many other profiles are available upon request! Minimum special order is only 25'.
SS-1B 1” thick sound deadening material. Features a
black perforated vinyl face with foam backing.
Attaches to cab wall using 3M 90 spray adhesive or
with the weld-on studs and push cabs sold below.
$ 3.95 per
square foot
AL-78 Aluminum domed push-on cap to fit 12 gauge $ .22 each
weld-on studs. Bare aluminum finish.
Page 22
12GA1 Weld-on stud for 1” thick material. For use
with a stud gun. (Other sizes available)
$ .09 each
BL-78 Aluminum domed push-on cap to fit 12 gauge
weld-on studs. Black finish. (Special order item)
$ .61 each
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
WINDOW MOLDING & PARTS
AS987 Window Rubber. For mounting 1/4” safety
glass or polycarbonate into cab skin. Fits skin
thickness of 12-16 gauge.
$2.95 per foot
Drawing available in the Helpful Data Section at the
end of the catalog.
Many other profiles available upon request!
More window items coming soon!
Page 23
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
Section E
Helpful Data
NOTE: All drawings and dimensions shown in this catalog
are for reference only.
You can now buy many of our parts online day or night!
http://slayerbrothers.blujay.com
Wisdom is welcome wherever it comes from.
- Bandamanna Saga
www.slayerbrothers.com
Page 24
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HELPFUL DATA – Part 1
Page 25
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HELPFUL DATA – Part 2
What latch do I need? As you approach the door from the outside, if the hinge is on the left, it should
take a left hand latch. Always match your hardware to the photos and drawings to make sure
because there are exceptions to every rule!
Page 26
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HELPFUL DATA - Part 3
Page 27
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HELPFUL DATA - Part 4
Page 28
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HELPFUL DATA - Part 5
Page 29
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
HELPFUL DATA - Part 6
Page 30
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
WIRING DIAGRAMS - Wipers
Page 31
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15
ABOUT US - FAQ
Our low prices are achieved by ordering parts in very large quantities and
paying our suppliers upfront. It's how we do business.
Q. Who can order from Slayer Brothers, LLC?
A. We are happy to sell to individuals or businesses and there is no minimum order.
Q. Why do you publish your prices when other companies don't?
A. We charge one price to everyone. Prices are posted so you don't have to wait for quotes
or wonder if your competitor is getting a better deal than you are. Please note that some of our parts
are sold online from Blujay and are priced slightly higher because they include free shipping.
Q. What catalog items do you carry in stock?
A. If it's in the catalog, it's in stock or will be back in stock soon unless noted.
Q. I need an item but it's not in your catalog, can you help?
A. In many cases we can. Call or email with your request.
Q. How often is your catalog updated?
A. About four times per year.
Q. Do you have a printed catalog?
A. We are working on that. You can currently view our catalog online or
download it to your computer.
Q. What options do you offer for shipping?
A. We ship by USPS, UPS and common carrier. Flat Rate Priority Mail is currently
the cheapest and fastest option for parts if you can provide a mailing address.
Our office staff will exhaust itself finding you a great deal on parts!
Page 32
Slayer Brothers, LLC Copyright © 2012-2015 All rights reserved.
Updated 1/24/15