1. No category

Sleagill Head farm, SLEAGILL, PENRITH, Cumbria, CA10 3HD. Tel: (+44) (0)1931 714106
Online SI-Card Sales: www.sportident.co.uk EMAIL: sales@SPORTident.co.uk
Commercial organisations are charged the recommended retail price. If the purchasing organisation is using the equipment for a sport based activity and
makes NO financial gain from the events or activities for which the equipment is used, most of the prices shown below will be discounted by about 15%.
Examples of Not for Profit organisations are amateur sports clubs, schools and colleges of further education. Organisations based outside UK/Republic
of Ireland should contact us for pricing information. Prices are subject to change without notice and are affected by currency fluctuations.
Carriage/Insurance is charged at cost.
Hardware Prices as at 03/02/15
Recommended
Discounted Price
Retail Price
£
£
£
£
ExVAT
ExVAT
SI-Cards - Also View/Purchase Individual SI-Cards online at www.sportident.co.uk
ComCard incl. Elastic finger loop. Combines an SI-Card 8 chip (30 punches) and a Moscow 11 Compass
58.81
49.01
49.99
41.66
SIAC Active Card incl. Elastic Finger Loop (128 Punches. For Air+ touch free punching. Battery needs changing
approximately every 4 years)
73.52
61.27
62.50
52.08
SI-Card 8 incl. Elastic Finger Loop (30 Punches. Suitable for use at all major worldwide events)
SI-pCard - Needs an Attachment (20 punches. 55mm x 55mm x 1mm. Not ideal for competitive events)
58.81
61.75
55.28
58.22
53.46
56.41
49.93
52.88
44.11
47.05
40.58
43.52
33.61
15.67
49.01
51.46
46.07
48.52
44.55
47.01
41.61
44.07
36.76
39.21
33.82
36.27
28.01
13.06
49.99
52.49
46.99
49.49
45.45
47.95
42.45
44.95
37.50
40.00
34.50
37.00
28.57
13.32
41.66
43.74
39.16
41.24
37.87
39.96
35.37
37.46
31.25
33.33
28.75
30.83
23.81
11.10
Yoyo. Attach your SI-Card to the yoyo. Attach the yoyo to your bike or your clothing
Keyring. Attach your SI-Card to a Keyring
Spare Lanyard which can be attached to your SI-Card or SI-pCard
Spare Elastic Finger Loop for SI-Card 8/9/10/11 - Black (used for orienteering)
Spare Elastic 25cm Wristband for all SI-Card - Black (not used for orienteering)
Wristband – Tyvek ultra-strong,Tamperproof, one use only. Strip of 10
SIAC Active Card Holder Bike Mounting
3.83
0.14
1.18
1.99
2.48
1.20
4.70
3.19
0.12
0.98
1.66
2.07
1.00
3.92
3.25
0.12
0.99
1.70
2.12
1.20
4.00
2.71
0.10
0.83
1.41
1.76
1.00
3.33
SI-Card 11 FLASH incl. Elastic Finger Loop (128 Punches. Suitable for use at all major worldwide events)
SI-Card 11 FLASH incl. Elastic Finger Loop (128 Punches) - Personalised Number
SI-Card 11 FLASH incl. Elastic Finger Loop. Trade-in an SI-Card or Emit brikke
SI-Card 11 FLASH incl. Elastic Finger Loop and Personalised Number. Trade-in an SI-Card or Emit Brikke
SI-Card 10 incl. Elastic Finger Loop (128 Punches. Suitable for use at all major worldwide events)
SI-Card 10 incl. Elastic Finger Loop (128 Punches) - Personalised Tip Colour & Number
SI-Card 10 incl. Elastic Finger Loop. Trade-in an SI-Card or Emit brikke
SI-Card 10 incl. Elastic Finger Loop and Personalised tip & Number. Trade-in an SI-Card or Emit Brikke
SI-Card 9 incl. Elastic Finger Loop (50 Punches. Suitable for use at all major worldwide events)
SI-Card 9 incl. Elastic Finger Loop (50 Punches) - Personalised Body/Tip Colour & Number
SI-Card 9 incl. Elastic Finger Loop. Trade-in an SI-Card or Emit brikke
SI-Card 9 incl. Elastic Finger Loop and Personalised Body/Tip Colour & Number. Trade-in an SI-Card or Emit Brikke
Hardware Prices as at 03/02/15
Recommended
Discounted Price
Retail Price
£
£
£
£
ExVAT
ExVAT
Stations - "Always On", include a real time clock & battery voltage monitor, which warns when battery is low.
Expected battery life - 5 years. Masterstations & Timemaster stations should be purchased with a purple
Service/Off card and coupling stick, also a Clear Backup card if you wish to clear previous event data
from a station.
Clear/Check/Start/Control/Checkpoint/Finish Stations
Station BSF7-D (Display Bottom) - Black
Station BSF8-DB (Display Bottom) Red
Optional Semi-permanent Label (Station Code) for top of BSF8 Station - Black on White background
SI-Master BS8DT Blue. Timemaster & BSF8 Station Combined
BS11-BL (Beacon Large for touch free punching. Typical use MTB Enduro stage Finish)
BS11-BS (Beacon Small for touch free punching. Typical use MTB Enduro stage Start)
115.55
112.39
0.88
170.70
431.46
157.04
96.29
93.66
0.73
142.25
359.55
130.87
98.21
95.54
0.74
145.09
366.74
133.48
81.85
79.61
0.62
120.91
305.62
111.24
Master station BSM7-RS232 with 1.5M lead. Stores 1000 SI-Card in Backup Memory and connects to PC - Red. (Not suitable
for preparing or reading backup from the old BS3/4/6 stations)
118.70
98.92
100.89
84.08
Master station BSM7-RS232 with 5M lead. Stores 1000 SI-Card in Backup Memory and connects to PC - Red. (Not suitable for
preparing or reading backup from the old BS3/4/6 stations)
USB/Serial Converter - Tested by SPORTident to Convert a USB Port for use with any RS232/Serial Masterstation
121.33
39.38
101.11
32.82
103.13
33.48
85.94
27.90
Master station BSM7-USB. Stores 1000 SI-Card in backup memory and connects to PC - Red. (Cannot be used
as a radio control or for preparing or reading backup from the old BS3/4/6 stations)
121.85
101.54
103.57
86.31
Station BSF8-SRR-DB (Display Bottom) - Blue or Red
SRR USB Dongle
171.22
39.91
142.68
33.26
145.54
33.93
121.28
28.27
Purple SERVICE/OFF Off Card for Activating/switching off stations
Coupling Stick for joining a Masterstation & Basestation and enhancing the field between the two
Purple Clear Backup Card for clearing the memory in Masterstations and Basestations
26.57
11.54
26.57
22.14
9.62
22.14
22.59
9.82
22.59
18.82
8.18
18.82
372.90
661.76
79.52
111.35
34.66
310.75
551.47
66.27
92.79
28.88
316.96
562.50
67.60
94.64
29.46
264.14
468.75
56.33
78.87
24.55
1334.85
2794.11
3031.49
2807.75
3046.20
1112.35
2328.43
2526.25
2339.80
2538.51
1134.66
2375.02
2576.81
2386.62
2589.30
945.48
1979.17
2147.32
1988.84
2157.74
861.74
718.12
732.52
610.41
348.61
70.58
25.87
340.33
5.29
26.99
26.99
290.51
58.82
21.56
283.61
4.41
22.49
22.49
296.32
60.00
22.00
289.29
4.50
22.95
22.95
246.93
50.00
18.33
241.07
3.75
19.12
19.12
Download/Wired Stations
Special Start/Finish Equipment
Start/Finish Station BS7-S - connects to lightbar or manual switch and PC using 15M serial leads
Photoelectric Lightgate Barrier (can be used with battery or PSU)
Power Supply Unit for Lightgate Barrier
Pair of Tripods for Lightgate Barrier
Manual Switch for BS7-S
Starter/Full Training Sets - Can be used without a computer
Starter Set - 20 SI-pCard, 3 BSF8 Stations (CLEAR/SI-Master, START, FINISH station), AP1310 Printer Set, Coupling Stick
Full Set - 20 SI-Card 8, 13 BSF8 Stations (CLEAR/SI-Master, START, 10 Control, FINISH station), AP1310 Printer Set, Coupling Stick
Full Set - 20 SI-Card 9, 13 BSF8 Stations (CLEAR/SI-Master, START, 10 Control, FINISH station), AP1310 Printer Set, Coupling Stick
Full Set - 20 SI-Card 8, 13 BSF7 Stations (CLEAR/SI-Master, START, 10 Control, FINISH station), AP1310 Printer Set, Coupling Stick
Full Set - 20 SI-Card 9, 13 BSF7 Stations (CLEAR/SI-Master, START, 10 Control, FINISH station), AP1310 Printer Set, Coupling Stick
Printer Set - includes Able AP1310 Thermal Printer & Printout Station (see below) with gender changer allowing attachment to a
computer, Serial/USB Converter, Service/OFF Card, Clear Backup Card, Start Card, Print Results Card, carry case 340x275x83mm
Able AP1310 Thermal Printer -
includes Internal Short life recheargeable battery & AC Adapter, RS232 lead ,rolls paper. Fully
charged battery prints at least 150 splits prints
Battery pack for GPT-4378 Printer. 1650mah Capacity - Approx 3 years optimal life if correctly maintained
Power Supply for GPT-4378 Printer 8V 4.8W 2800MA
Printout Station BSM7-P RS232. Used with AP1310, MCP7830, GPT-4378 & DPU-3445 printers. Also as a Masterstation with a PC
Printout Station -> Computer Gender Changer & Null Modem Mini Connector
Purple START Card. Sets a mass start time (no-punch) in a Printout Station for the next SI-Cards
Purple PRINT RESULTS Card for printing results from a Printout Station
Hardware Prices as at 03/02/15
Recommended
Discounted Price
Retail Price
£
£
£
£
ExVAT
ExVAT
Fast Thermal Printers & Paper Rolls - Prices Include Installation Support
Epson TM-T88V USB Thermal 80mm Split time Printer. Amazingly fast Point of Sale Printer
Epson TM USB Interface Board. Changes Printer from a Parallel to USB device
Parallel Port -> USB Conversion lead
262.80
79.68
24.79
219.00
66.40
20.66
262.80
79.68
24.79
219.00
66.40
20.66
Thermal Printer Paper Roll 80mm width x 80mm diameter for Epson/Citizen/Star POS printers
Thermal Printer Paper Roll 57.5mm width x 31mm diameter for GeBe GPT-4378 printer
Thermal Printer Paper Roll 57.5mm width for Able AP1310 and Martel MCP7830 printer
Thermal Printer Paper Roll 112mm width for Seiko DPU414 and DPU3445
2.64
1.08
1.15
2.20
2.20
0.90
0.96
1.83
2.64
1.08
1.15
2.20
2.20
0.90
0.96
1.83
Spare magnet for switching on BSF3/4/6 Base/Masterstations
2.5MM Allen Key for removing plastic bottom plate of a BS3/4/6/7 station
1.5MM Allen Key for removing metal bottom plate of a BS8 station
2.5MM hex bit for electric screwdriver/drill to remove plastic bottom plate on a BS3 - BS7 station
Replacement rubber Ring (set of 2) for sealing between base and cover on a BS3/4/6/7 Station
Replacement Nut for attaching cover to base of BS3/4/6/7 station
Replacement Bolt for attaching cover to base of BS3/4/6/7 station
Station Box BS3/4/6/7 Transparent, including bottom plate
Station Box BS8 Blue or Red, including bottom plate
Shielding foil BS3/4/6/7 in Black, Red or Red/Blue
Battery pack providing 400 hrs life for BS3/4/6 station - Approx. 3 years shelf/install life
3.53
2.47
2.47
2.47
2.72
0.13
0.13
6.41
5.99
2.10
5.65
2.94
2.06
2.06
2.06
2.27
0.11
0.11
5.34
4.99
1.75
4.71
3.00
2.10
2.10
2.10
2.32
0.11
0.11
5.45
5.09
1.79
4.80
2.50
1.75
1.75
1.75
1.93
0.09
0.09
4.54
4.24
1.49
4.00
Power Supply Unit for UK use in MCP7830 Printer Set, Special Start/Finish
Power Inverter 300 Watt. Converts 12V DC from Car/Leisure Battery to Mains 240 Volt.
18.22
69.43
15.18
57.86
15.48
69.43
12.90
57.86
BS3/4/6/7 Metal Bottom Plate – security plate allows a base station to be securely wired to an immovable object
BS8 Fitted Metal Bottom Security Plate 1 – Allows a base station to be securely wired to an immovable object
BS8 Fitted Metal Bottom Security Plate 2 – As for Plate 1 but unit can be seated in a BSF7 holder on a stake
Wire Strop for securing Bottom Plate 3MM diameter x 1Metre length. With plastic end caps
Wire Rope Grips for 3 - 5 MM diameter strop with 8MM Nut. Creates a reasonably secure loop in the wire
8MM Combination Spanner for tightening/loosening a wire rope grip with 8mm nut
BS8 Station Metal Plate and two tamper proof bolts that secure a station permanently to an immovable object
6.16
8.26
8.26
2.87
1.60
5.04
12.30
5.13
6.88
6.88
2.39
1.33
4.20
10.25
6.16
8.26
8.26
2.87
1.60
5.04
10.45
5.13
6.88
6.88
2.39
1.33
4.20
8.71
14.11
11.76
12.00
10.00
16.94
1.78
2.63
2.63
4.42
3.67
4.42
5.89
4.34
37.12
14.12
1.48
2.19
2.19
3.68
3.06
3.68
4.91
3.62
30.93
14.40
1.52
2.23
2.23
3.75
3.13
3.75
5.00
3.70
31.55
12.00
1.26
1.86
1.86
3.13
2.60
3.13
4.17
3.08
26.29
55.87
31.51
28.88
10.81
21.01
13.52
46.56
26.26
24.07
9.01
17.51
11.27
47.50
26.79
24.55
9.20
17.86
11.50
39.58
22.32
20.46
7.66
14.88
9.58
Accessories
Lightweight hardened alloy ‘L’ stake, drilled so that plastic station holder and pin punch may be attached. Wt
400gm excl. Holder, height 75cm above ground
Glass Fibre stake (yellow). Station holder can be attached. Wt. 100gm excl holder, height 68cm above ground.
One sliding clip on shaft. Pin punch needs to hang on a cord from stake
Extra Plastic sliding clip for shaft of glass fibre stake
Plastic Narrow Mounting for BS3/4/6/7 Station with no bolt/screw holes
Plastic Narrow Mounting for BS8 Station with no bolt/screw holes. Snaps into BS3/4/6/7 Plastic Narrow Mounting
Plastic Holder for BS3/4/6/7 Station with two bolt/screw holes. Attaches to stake or structure
Plastic Holder for BS8 Station with two bolt/screw holes. Attaches to stake or structure
Plastic Holder for BS8 Station with two bolt/screw holes. Snaps into Plastic Holder for BS3/4/6/7. Also attaches to stake or structure
Orienteering Kite - Nylon, 30cm x 30cm
Pin punch to attach to stake
Set of 4 Lightweight Cones 45cm with velcro tape for top. BSF8 Stations are attached for gymnasium use
Carrying Vest for 16 BSF3/4/6/7 SPORTident Stations (not suitable for BSF8)
Carrying Belt for 8 BSF3/4/6/7 SPORTident Stations (not suitable for BSF8)
Blue Carry Case Large (394x294x106mm) - Holds approx. 18 BSF7 or 30 BSF8 Basestations and a Masterstation
Foam Insert for a Large Blue Carry Case (394x294x106mm) - holds13 BSF8 and 1 BSM7 Station
Blue Carry Case Small (340x275x83mm) - Holds the GPT-4378 and MCP7830 Printer Sets
Foam Insert for small a Blue Carry Case (340x275x83mm) - holds 50 SI-Cards
Hardware Prices as at 03/02/15
Recommended
Discounted Price
Retail Price
£
£
£
£
ExVAT
ExVAT
Hire of Equipment & Optional Prep of Stations/SI-Cards. Minimum Hire Charge Excl. Losses/Carriage £45+VAT
46.50
48.00
132.00
38.75
40.00
110.00
37.20
48.00
132.00
31.00
40.00
110.00
SI-Card 8 One Day use. Click For Significant Discounts If ALSO Using SiEntries and/or AutoDownload
SI-pCard One Day use. Click For Significant Discounts If ALSO Using SiEntries and/or AutoDownload
SI-Card 5 One Day use. Click For Significant Discounts If ALSO Using SiEntries and/or AutoDownload
SI-Card 9 One Day use. Click For Significant Discounts If ALSO Using SiEntries and/or AutoDownload
SI-Card 6 One Day use. Click For Significant Discounts If ALSO Using SiEntries and/or AutoDownload
SI-AC One Day use. Click For Significant Discounts If ALSO Using SiEntries and/or AutoDownload
2.29
2.29
2.29
2.93
3.54
4.32
1.91
1.91
1.91
2.44
2.95
3.60
2.29
2.29
2.29
2.93
3.54
4.32
1.91
1.91
1.91
2.44
2.95
3.60
Elastic Finger loop (washed). Used mainly for orienteering events
Elastic Wristband (washed). Used mainly for non-orienteering events
Tyvek one use wristband, tamperproof. Used mainly for non-orienteering events
Lanyard which can be worn round the neck and attached to your SI-Card or SI-pCard
0.12
0.12
0.12
0.12
0.05
0.10
0.04
0.10
0.10
0.10
0.10
0.04
0.08
0.03
0.12
0.12
0.12
0.12
0.05
0.09
0.04
0.10
0.10
0.10
0.10
0.04
0.08
0.03
Metal Bottom Plate Attached to BSF7 Station
Wire Strop for securing Bottom Plate & Rope Grip. 8MM Spanners included if required
6.00
10.80
22.72
6.60
0.48
1.08
0.84
5.00
9.00
18.93
5.50
0.40
0.90
0.70
4.80
8.64
18.17
5.40
0.48
1.08
0.84
4.00
7.20
15.14
4.50
0.40
0.90
0.70
Lightweight hardened alloy ‘L’ stake or Yellow Fibre Stake with plate to Hold a Control Station
2.33
1.94
2.33
1.94
0.50
1.20
15.84
60.30
18.00
18.00
0.42
1.00
13.20
50.25
15.00
15.00
0.50
1.20
15.84
60.30
18.00
18.00
0.42
1.00
13.20
50.25
15.00
15.00
35.00
30.00
29.17
25.00
35.00
30.00
29.17
25.00
FREE
3.10
10.56
FREE
2.58
8.80
FREE
3.09
10.56
FREE
2.58
8.80
15.76
2.40
24.00
1.20
0.24
13.91
13.13
2.00
20.00
1.00
0.20
11.59
15.76
2.40
24.00
1.20
0.24
13.91
13.13
2.00
20.00
1.00
0.20
11.59
AutoDownload Software Single Day Licence - Available on expiry of a previously purchased licence
Laptop with AutoDownload & Thermal Printer Drivers pre-loaded. Single Day Use
Training Set - 20 SI-Card 8, 13 BSF8 Stations (Clear/SI-Master, Start, 10 Control, Finish station), Printout Station/Printer Set
Optional Additional Service - Each SI-Card is Provided CLEARed & CHECKed
Optional Additional Service - Each SI-Card has a one-use wriststrap attached. Strap must be purchased separately
Optional Additional Service - Numbering SI-Card Straps (not usually necessary)
Control Station (BSF7 or BSF8) daily use
Beacon Station Small (BS11-BS-Red or BS11-BS-Blue) daily use
Beacon Station Large (BS11-Large) daily use
Masterstation (BSM7-RS232 or BSM7-USB) daily use
Control and Masterstation Station Optional Preparation - Programme and Label
36mm Semi-Permanent Label suitable for the period of a hire, displaying a Control Code. Attaches to each side of
the angle plate of a metal stake or the top of a station
Orienteering Kite - Nylon, 30cm x 30cm
Start/Finish Station BS7-S - connects to lightbar or manual switch and PC using 15M serial leads
Photoelectric Lightgate Barrier & Pair of tripods
Epson TM-T88 USB Thermal Split time Printer. Amazingly fast Point of Sale Printer.
Thermal Printer for use with Printout Station - includes Internal Short life recheargeable battery
Thermal Printer Set - includes Thermal Printer & Printout Station, Service/OFF Card, Clear Backup Card, Start
Card, Print Results Card
Unleaded Petrol Generator and long power lead for external use. Petrol not included
Upgrades/Repairs
Warranty Repair
Firmware upgrade for SPORTident BS7/8 stations
Station Inspection - No Fault Found. Includes Replacement of O-ring Seals (BS7/BS8) & Firmware Upgrade
Station Inspection - BS7/8 without Permanent Metal Baseplate. Lithium Battery Replacement and includes O-ring Seals &
Firmware Upgrade
Removal/Fitting of BSF8 Permanent Metal Baseplate during station inspection
Out of Warranty BS7/8 Station Repair. If not repairable, see Station Replacement options above
SI-Card Label (per label for 5 or less)
SI-Card Label (per label for 6th and additional)
Out of Warranty SI-Card Repair or Replacement of Plastic Parts. If not repairable, see SI-Card purchase options above
Warranty - Faulty Goods Should Be Returned to SPORTident UK Ltd.
SI-Cards except SIAC: 5 year chip failure warranty. Warranty does not cover breakage of plastic parts
SIAC: 2 years circuitry failure. Warranty does not cover battery and breakage of plastic parts
Control/Masterstations: 2 years warranty. Stations are water-resistant but cannot be immersed in water. Opening a station
without prior agreement with SPORTident UK invalidates the warranty.
Printers: 1 year warranty
Consumables (elastic finger loops, wristbands, Yoyos): No warranty