온도, 틸트, 마이크 센서모듈 기술규격서
UTRCⓇ TTM-CSM 복합 센서모듈 온도, 틸트, 마이크 센서모듈 기술규격서 TTM-CSM은 마이크, 틸트, 마이크 센서를 내장하여 UTRC에서 제공하는 개발보드 MCU보드에 적용하여 다양한 응용에 활용할 수 있도록 설계된 복합 센서모듈이다. 이 문서는 또는 TTM-CSM 모듈 활용에 필요한 전기적 특성, 핀 사양 등의 기술규격을 제공한다. CONTENTS 1. General features ················································································································ 2 2. Configuration and Deployment ······················································································ 2 3. Top-Level Functional Description ················································································ 3 4. Electronic Characteristics ································································································· 3 5. Mechanical Specification ·································································································· 4 Appendix 1. PCB ·················································································································· 6 Appendix 2. Schematics & Part list ··················································································· 7 CONTACT INFORMATION Ubiquitous Information Technology Research Laboratory, Daegu University Please visit the UTRC web site : www.utrc.re.kr or send an email to support@utrc.re.kr Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Page 1/7 1. General features TTM-CSM은 온도, 틸트, 마이크 센서를 내장하여 UTRC에서 제공하는 MCU보드에 적용하여 다양한 응용에 활용할 수 있도록 설계된 복합 센서모듈이다. 이 모듈의 특징과 활용, 주요 참고 자료는 다음과 같다. n 특징 w 온도, 틸트, 마이크 센서 적용 w 커넥터 기반 보드 장착 n 활용 w UTRC의 개발용 또는 범용 보드(AVR2561-DB-C, MSP430-GB-C)에 장착해 다양한 응용에 활용할 수 있음 w External Interface를 통해 타 벤더의 보드에 장착해 사용할 수 있음 n 참고 자료 Sensor Web site : http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010738#docu mentation w 틸트 Sensor Web site : http://www.das-co.com/html/application/application1_view.php?section=2§ion2 =40&number=164&slide=select w 마이크 Sensor Web site : http://www.ringford.com/pdf/catalogue.pdf w xxx User's guide : link, 센서모듈이 사용되는 사례를 볼 수 있음 w 온도 2. Top-Level Functional Description 복합 센서모듈 구성은 아래의 그림에서 보는 바와 같이 온도, 틸트, 마이크 센서로 이루어져 있으며, 전원은 외부로부터 제공받는다. Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Page 2/7 UTRCⓇ TTM-CSM 복합 센서모듈 <모듈 구성> n 주요 부품 구성 주요 1 온도 센서 2 틸트 센서 3 마이크 센서 Interface 4 External Connector § § § Part Microchip社, TC1047 DASh社, TS3 Ringford社, CMP-4540 - § § § § Description -40℃to +125℃ Beam Angle 15° -40±2dB Senstivity 1.27mm pin pitch 10pin connector n 커넥터 External Interface Connector J1, J2은 2mm Pin pitch의 10개 핀으로 구성되어 있어 MCU 보드와 커넥터로 연결해 사용할 수 있도록 한다. 각 커넥터의 핀 구성은 아래와 같다. 모듈의 센서 모듈을 외부 GMD ACCOUSTIC_ADC ACOUSTIC_EN J2 1 2 +3.3V 3 4 TEMP_ADC 5 6 7 8 9 10 TilT_OUT J2 1 2 3 4 5 6 7 8 9 10 Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Page 3/7 3. Configuration and Deployment 복합 센서모듈은 2mm Pin pitch의 커넥터를 이용하여 개발용 또는 범용노드에 장착된다. 4. Electronic Characteristics 복합 센서모듈의 하드웨어 성능을 아래 표에 나타내었다. 1 Power 2 Sensor Parameter Min. § Ext § Accuracy(T) -2 TC1047 § Supply Current, Operating § Beam Angle TS3 § Contact Current § Senstivity -42 CMP-4540 § Supply Current, Operating Typ. Max. 3.3 ±0.5 +2 35 60 15 0.25 -40 -38 0.8 70 Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Unit V ℃ uA ° A dB mA Page 4/7 UTRCⓇ TTM-CSM 복합 센서모듈 5. Mechanical Specification n Dimension 복합 센서모듈의 size는 34.8mm X 16mm, PCB의 두께는 1T 이며 2Layer로 제작이 되었다. n External Interface Connector External Interface Connector J1, J2은 1.27mm Pin pitch의 10개 핀으로 MCU 보드와 커넥터로 연결해 사용될 수 있도록 한다. J1, J2의 Dimension과 핀 구성은 각각 아래 그림과 표에 나타내었다. 복합 센서 모듈의 구성되어 있어 센서 모듈을 외부 Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Page 5/7 부록1. Schematics Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Page 6/7 UTRCⓇ TTM-CSM 복합 센서모듈 Copyright © 2013 Ubiquitous Information Technology Research Laboratory The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. Ubiquitous Information Technology Research Laboratory(UTRC, hear-after) assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from the use of information included herein. Additionally, UTRC assumes no responsibility for the functioning of undescribed features or parameters. UTRC reserves the right to make changes without further notice. UTRC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does UTRC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. UTRC products are not designed, intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of the UTRC product could create a situation where personal injury or death may occur. Should Buyer purchase or use UTRC products for any such unintended or unauthorized application, Buyer shall indemnify and hold UTRC harmless against all claims and damages. UTRCⓇ are registered trademarks of Ubiquitous Information Technology Research Laboratory. Other products or brand names mentioned herein are trademarks or registered trademarks of their respective holders. Copyright @ 2013 by Ubiquitous Information Technology Research Laboratory Page 7/7
© Copyright 2024