Agenda - Additive Manufacturing Users Group
2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registrahon Required C Customers Only Session H Hands-‐on Training Sunday, April 19, 2015 7:30am 8:00am 8:30am SME Additive Manufacturing Certificate Program Pre-‐Registration Required Additional Cost for SME Course | $250 includes course review and test (special AMUG member pricing) This sessions is managed and provided by SME Review Course: Sunday, April 19, 9:00am-‐1:00pm Location: Clearwater Test is Friday: Friday, April 24, 8:30am -‐ 12:00pm R! SME, in cooperation with the Milwaukee School of Engineering (MSOE) and America Makes, has established a team of advisors who have strategically defined the additive manufacturing body of knowledge. This body of knowledge will serve as the basis for the Additive Manufacturing Certification Program, which includes a 4-‐hour review course, and a 4-‐hour exam. 9:00am -‐ 1:00pm Information regarding the Certification Program, Testing and Costs can be found at: SME Course and Test Registration URL Link: https://www.xpressreg.net/eReg/RegDemoE-‐Reg.asp?rc=&aban=&p1= NOTE: -‐ Pre-‐Registration is REQUIRED -‐ Additional costs apply to the Certification Review Course and Test -‐ SME is offering a discount to AMUG members for the Certification Review Course and Test at the AMUG Conference -‐ The SME Certification Course is separate from the AMUG Conference and payment for the certification program cannot be combined with the AMUG Conference registration payment -‐ Participants can choose to just take the Review Course, or both the Review Course and Test -‐ Certificates are provided by SME to those that pass the test on Friday -‐ Participants are required to bring a laptop with Wi-‐Fi capability to complete the test on Friday. Laptops will not be provided. 1:00pm 1:30pm ExOne User Group ExOne Customer Session 1:30pm -‐ 4:00pm Additional information to follow. Location: Boardroom 1 2:30pm 3:00pm 3:30pm 4:00pm 4:30pm C! 2:00pm CONFERENCE REGISTRATION Opens @ 1:00pm Closes @ 6:00pm Registration 2nd Floor 5:00pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda NEW MEMBER WELCOME If this is your first time at AMUG, we invite you to join us for the New Member Welcome and Overview. The AMUG Board will review what you need to know and what you can expect from the conference. Location: Clearwater Stratasys User Group C! Stratasys Customer Reception 3:30pm -‐ 4:30pm Join us to receive your thank you gift from Stratasys, network with other Stratasys customers and enjoy free food. (Stratasys customers only, please RSVP to kim.killoran@stratasys.com or phone +1 952-‐906-‐2232 Location: River Terrace 3 AMUGexpo and Student Poster Session (5:00pm-‐10:00pm) AMUGexpo is open to all AMUG registered conference attendees The AMUGexpo takes place Sunday and Monday night at the AMUG Conference The venue brings together OEMs, vendors and suppliers (such as software, AM materials, ancillary equipment, post-‐processing, scanners, service bureaus, etc.) in one location to engage with the AMUG Conference attendees. Sunday night includes a Student Poster Session Complimentary Food and Beverages Location: Grand Ballrooms and Grand Foyer Register today at www.am-‐ug.com Page 1 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registraeon Required C Customers Only Session H Hands-‐on Training Monday, April 20, 2015 Registration (7:00am -‐ 8:00am) -‐ 2nd Floor Breakfast (7:00am -‐ 8:00am) -‐ Grand Ballroom Foyer, 2nd Floor 7:00am -‐ 7:30am Location Time Speakers Grand Ballroom 4/5 1hr Mark Barfoot Grand Ballroom 4/5 1 hr Todd Grimm Diamond Sponsor General Session Address | Stratasys Diamond Sponsor General Session Address | Somos® Grand Ballroom 4/5 Grand Ballroom 4/5 30min 30min 2014 Technical Competition Winners | Advanced Concept Winner -‐ Reebok, Checklight and Advanced Finishing Winner -‐ CIDEAS, The Perfect Choice Grand Ballroom 4/5 30min Joe Allison Melissa Lutz Gary Rabinovitz Mike Littrell 8:00am 8:30am 9:00am 9:30am 10:00am 10:30am 11:00am AMUG Welcome by AMUG President 2015 AMUG Welcome and Conference Overview, Scholarship Awards, AMUG Updates 11:30am KEYNOTE ADDRESS | Todd Grimm, T.A. Grimm & Associates, Inc. Break (10:00am -‐ 10:30am) Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY @ 1:30pm TRACKS METALS MEDICAL SCANNING CONCEPT TO PART WORKSHOPS SOFTWARE WORKSHOPS Location Conference Center A Clearwater St Johns River Terrace 2 River Terrace 3 Daytona 1:30pm -‐ 2:00pm 3D Printing and Its Evolving Role in the Development and Manufacture of Complex Laser AM at the Royal 3D Printing Parts Without 3D Printing at Caterpillar: Medical Devices; Canadian Navy Dockyard a 3D CAD Model Applications and The Continuous Flow Total Matthew Barnett, Dept. of Dan Perreault, NeoMetrix Programs Artificial Heart National Defence, Canada Technologies Jim Lahood, Catepillar William Cohn, Texas Heart Institute at Baylor St. Luke's Medical Center Magics Basic Class by Materialise Jalel Nadji, Materialise Hydrographic Printing Ed Tackett, RapidTech 2:00pm -‐ 2:15pm 3D printing data preparation software package, STL editor, and more Pre-‐Registration is required Seating is limited (1 hour) 2:15pm -‐ 2:45pm R! H! H Validating Additive Design Faster and Lighter: Design, Analysis, & Testing Additive Technology Enhancing Manufactured Parts Using Applications of Topology of Printed Front Knuckle for Product Development Industrial Computed Optimization in Additive Collegiate Baja Car Rich Mitchell, Chris Brockman, Tomography (CT) Scanning Manufacturing Patrick Gannon, rp+m Stryker Instruments Fabio Visentin, JG&A Jaideep Bangal, Metrology solidThinking Contact Abbey Delaney abbey.delaney@materialise.com +1 (734) 259-‐7030 Class Time: 1:30pm-‐3:00pm DIAMOND & PLATINUM SPONSOR SESSIONS See Second Page for Details STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 STRATASYS, Grand Ballroom 3, STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 ALL SESSIONS IN GRAND BALLROOM END 2:45pm -‐ 3:15pm Break (2:45pm -‐ 3:15pm) TRACKS METALS MEDICAL SCANNING TRANSPORTATION WORKSHOPS Location Conference Center A Clearwater St Johns River Terrace 2 River Terrace 3 3:15pm -‐ 3:45pm Metals: Not Just for Prototypes – Real Parts for Real Applications Bob Henderson, Linear Mold & Engineering Additive Manufacturing in Regenerative Orthopedics Dr. Yaser Shanjani, Ph.D., Stanford University Product Development 3.0 Emilie Grenier, Creaform SOFTWARE WORKSHOPS Daytona H! DeltaWing Racing with On-‐Track AM Intake Manifold Stewart Davis, CRP USA Magics Advanced Class by Materialise Evan Kirby, Materialise 3:45pm -‐ 4:00pm TRACKS 4:00pm-‐ 4:30pm LASER SINTERING Microstructural & Residual FDA Challenges When High Speed Sintering: The Stress Behavior in AM Developing New Materials for Scan to Print vs. Next Generation for Metals Additive Manufacturing Scan to CAD Additive Manufacturing Amanda Wu, Lawrence Dr. Albert Rego, Ph.D., MedTech Roman Walsh, SpaceClaim Neil Hopkinson, University Livermore National Review of Sheffield Laboratory Silicone Molding and Polyurethane Casting Workshop Part 1 Joel Charbonean, Innovative Polymers 4:30pm -‐ 4:45pm TRACKS 4:45pm-‐ 5:15pm R! H! AEROSPACE 3D printing data preparation software package, STL editor, and more Diamond or Platinum Sessions in Grand Ballroom areas will not be offered after the BREAK. All Ballrooms will be closed for AMUGexpo preparation. Pre-‐Registration is required Seating is limited Contact Abbey Delaney abbey.delaney@materialise.com +1 (734) 259-‐7030 Class Time: 3:15pm-‐4:45pm A Comparison Between Software Validation for LAMP and SLE -‐ Disruptive ROMER Absolute Arm for Powder Bed and Power Fed Automated Processes -‐ Additive AM Technologies for Reverse Engineering Processes for 3D Printed Manufacturing Turbine Engine Hot-‐ Matt Hall, Hexagon Metals John Beasley, RAC (US) MedTech Section Components Metrology Richard Grylls, Optomec Review Suman Das, DDM Systems Sessions End 5:15pm 5:15pm 5:30pm 6:00pm -‐ 10:00pm AMUGexpo and Technical Competition Location: Grand Ballroom and Foyer 2nd Floor Time: 6:00pm -‐ 10:00pm AMUGexpo continues. Discover new services, materials, systems and peripherals. Complimentary food and beverage. Technical Competition provides a forum for users of additive manufacturing technologies to display their unique applications and finishing capabilities. *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 2 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registra]on Required C Customers Only Session H Hands-‐on Training Monday, April 20, 2015 See previous page for morning and concurrent sessions Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY @ 1:30pm DIAMOND SPONSOR SESSIONS SPONSORS Location 1:30pm -‐ 2:00pm Stratasys Stratasys Somos® Concept Laser SLM Solutions GE ExOne EOS of North America Grand Ballroom 3 City Terrace 12 Grand Ballroom 6 Grand Ballroom 2 Grand Ballroom 1 Board Room 4 Grand Ballroom 7 Grand Ballroom 8 FDM Fundamentals Mark Bashor, Stratasys 2:00pm -‐ 2:15pm 2:15pm -‐ 2:45pm PolyJet Fundamentals Meghan Rock, Stratasys Inside Concept Laser: A Leverage Additive Parts in Introduction to What Company Overview and The Intersection of Jet Manufacturing: Jigs and Fixtures, Stereolithography is and Tour Through GmbH, USA, Ceramics Developments in Engines and Additive End-‐of-‐Arm Tooling How it Relates to Other and Asia Additive Manufacturing Manufacturing Jay Beversdorf, Stratasys Similar Technologies Oliver Edelmann, John Jesse Blacker, ExOne Andy M artin, G E A viation Kevin Zaras, Somos® Murray, Andreas Tulaj, Concept Laser Selective Laser Melting® System Demonstration -‐ SLM® 280HL Jim Fendrick, Winthrop Sheldon, Brad Mount, SLM ACT Group Solutions REPEAT: Inside Concept Grand Ballroom 7 Laser: A Company Open System Demo I Made an SL Part, Now From Invention to Overview and Tour Using Cloud-‐Based Tools to Drive What? Best Practices for Production: Additive Through GmbH, USA, and Creativity and Design Safe Handling and Manufacturing at GE Asia ProX Selective Laser Armen Zildjan, GrabCAD Processing Healthcare Oliver Edelmann, John Sintering Kevin Zaras, Somos® Steve Abitz, GE Healthcare Murray, Andreas Tulaj, David Moore, 3D Systems Concept Laser 2:45pm -‐ 3:15pm 3:15pm -‐ 3:45pm PLATINUM SPONSOR SESSIONS EOS M-‐System Machine Preparation Al Burchi, EOS of North America Prodways Grand Ballroom 8 Prodways: A New Way of Producing the Future in Additive Manufacturing Brian Bauman, Prodways Break (2:45pm -‐ 3:15pm) session closed TBA Jack Stubbs, Uniersity of MN Diamond and Platinum sessions in Grand Ballroom areas will not be offered after the Break. All Ballrooms will be closed for AMUGexpo preparation. 3:45pm -‐ 4:00pm 4:00pm-‐ 4:30pm Panel Discussion State of Industry: Where AM is Headed and What it Makes for End-‐Users and Bureaus Expert Panel 4:30pm -‐ 4:45pm 4:45pm -‐ 5:15pm Diamond and Platinum sessions in Grand Ballroom areas will not be offered after the Break. All Ballrooms will be closed for AMUGexpo preparation. session closed Diamond and Platinum sessions in Grand Ballroom areas will not be offered after the Break. All Ballrooms will be closed for AMUGexpo preparation. session closed Sessions End 5:15pm 5:15pm 5:30pm 6:00pm -‐ 10:00pm AMUGexpo and Technical Competition Location: Grand Ballroom and Foyer 2nd Floor Time: 6:00pm -‐ 10:00pm AMUGexpo continues. Discover new services, materials, systems and peripherals. Complimentary food and beverage. Technical Competition provides a forum for users of additive manufacturing technologies to display their unique applications and finishing capabilities. *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 2B -‐ Diamond and Platinum Sponsor Sessions Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registraeon Required C Customers Only Session H Hands-‐on Training Tuesday, April 21, 2015 7:00am -‐ 7:30am 8:00am 8:30am 9:00am AMUG Announcements 9:30am Registration (7:00am -‐ 8:00am) -‐ 2nd Floor Breakfast (7:00am -‐ 8:00am) -‐ Grand Ballroom Foyer, 2nd Floor 11:00am 11:30am Speakers Time 30min KEYNOTE ADDRESS | Lonnie Love, Ph.D., Oak Ridge National Laboratory Grand Ballroom 4/5 1hr Lonnie Love EU Ambassador Update Grand Ballroom 4/5 30min Graham Tromans / Stefan Ritt Grand Ballroom 4/5 Grand Ballroom 4/5 Grand Ballroom 4/5 30min 30min 30min Mark Barfoot Break (10:00am -‐ 10:30am) 10:00am 10:30am Location Grand Ballroom 4/5 Diamond Sponsor General Session Address | Concept Laser Diamond Sponsor General Session Address | SLM Solutions Diamond Sponsor General Session Address | GE Oliver Edelmann/John Murray Stefan Ritt Edward Herderick Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY AT 1:30pm TRACKS PLATINUM SPONSOR: Rapid Prototyping Service AEROSPACE BUSINESS CONCEPT TO PART LASER SINTERING Location Grand Ballroom 4 Grand Ballroom 5 St Johns River Terrace 3 Daytona Comparing and Testing Materials Brian Slocum, Lehigh University Impact of PUSH Post-‐ Processing on Properties of Laser-‐Sintered Nylon 12 Neil Hopkinson, University of Sheffield 1:30pm -‐ 2:00pm How 3D Printing is Changing Justification and Manufacturing Methods that Additive Manufacturing for Considerations for Bringing Haven't Changed Since the Aerospace Components In AM Technology Industrial Revolution Brian Thompson, GNK Mark Barfoot, Hyphen Ken Brace, Rapid Prototyping Aerospace North America Services, Todd Grimm, Grimm Services & Associates STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering: Grand Ballroom 8 2:00-‐2:15 TRACKS Metals Location Grand Ballroom 4 2:15pm -‐ 2:45pm DIAMOND & PLATINUM SPONSOR SESSIONS AM vs. Conventional Manufacturing in Cubesat Applications, Process and Applications Material Development Geovanni Solorzano, Embry-‐ for DMLS Riddle Aeronautical Matt Garrett, Integrated 3D University LLC Financing 3D Printers and AM Technology Charlie Norton, NCP Leasing WORKSHOPS River Terrace 3 H! Improving the Surface Quality of Sintered Polymeric Parts Through Material Design Arnaud Lemaitre, Arkema STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 2:45-‐3:00 TRACKS Location 3:00pm -‐ 3:30pm DMLS Data Preparation Al Burchi / Jalel Nadji, EOS of North America / Materialise (1 hour) SLM Fundamentals and Applications for Rocket Is IP Your Friend or Enemy? Engine Manufacturing John Hornick, Finnegan, Youping Gao, Ken Simpson, Henderson, Farabow, Garnett John Malinzak, and Jeff & Dunner LLP Haynes, Aerojet Rocketdyne Additive Manufacturing Activity at University of Cincinnati, Dr. Sam Anand, Dustin Lindley, University of Cincinnati Research Inst. 3:30pm-‐ 4:00pm The Wall Street Side of 3D Printing Troy Jensen, Piper Jaffray Stereolithography Silicone Molding and Polyurethane Casting Workshop Part 2 Joel Charbonean, Innovative Polymers Daytona Keeping Twenty-‐Six SLA Machines Running Andrew Graves, Stratasys Direct Manufacturing STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 SLA Tips: Clear Parts and Material Comparisons Paul Hojan, Hyphen STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 Sessions End 4:00pm 4:00pm 4:30pm 5:15pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm Buses leave at 5:15pm 2015 AMUG Dinner & Awards Banquet Location: It's a surprise! Transportation will be provided. All attendees of the AMUG Dinner and Awards Banquet are required to take the bus provided by AMUG. Please wear comfortable clothing and closed-‐toe shoes -‐ jeans and tennis shoes are ok! Please do not bring laptops or items that may need to be stored. Location of the Dinner and Awards banquet could be inside...could be outside...could be both! 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 3 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registracon Required C Customers Only Session H Hands-‐on Training Tuesday, April 21, 2015 See previous page for morning and concurrent sessions Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY @ 1:30pm DIAMOND SPONSOR SESSIONS SPONSORS Location 1:30pm -‐ 2:00pm PLATINUM SPONSOR SESSIONS Stratasys Stratasys Somos® Concept Laser SLM Solutions GE Hewlett Packard Renishaw Engineering Grand Ballroom 3 City Terrace 12 Grand Ballroom 6 Grand Ballroom 2 Grand Ballroom 1 Board Room 4 Grand Ballroom 7 Grand Ballroom 8 HP Multi Jet Fusion™ Technology Hewlett Packard Metal Additive Manufacturing for the Production Environment Jonathan Porter, Renishaw Customer Support: FDM Brian Hall, Stratasys Selective Laser Melting® How Newell Rubbermaid System Demonstration -‐ Uses Their Rapid Prototyping New Product Introduction: SLM® 280HL Machines to Optimize Get the Most Out of Legacy M2 cusing Singlelaser, The Intersection of Jet Engines Jim Fendrick, Winthrop Product Development SL and Lightyear Multilaser, and X line 2000R and Additive Manufacturing Sheldon, Brad Mount, SLM Michael Zerbe, Thomas John Schaefer, Somos® John Murray, Zach Murphree, Andy Martin, GE Aviation Solutions DeSadler, Newell Concept Laser Rubbermaid Open System Demo 2:00pm -‐ 2:15pm R! 2:15pm -‐ 2:45pm 3D Printed Rapid Tools for Injection Molding Gil Robinson, Stratasys Closing the Loop: Support Everything You Need to Solutions as the Additive Know About Quality FDM Materials: What's New? Metal AM Applications Manufacturing Industry Management Brendon Dillon, Stratasys Andreas Berkau, Citim Matures John Murray, Zach Murphree, Space is Limited! Jeremy Vos, RP Support Concept Laser Pre-‐Registration required, contact Matthew DiCecca matthew.dicecca@stratasys.com 2:45pm -‐ 3:00pm EOS of North America Grand Ballroom 8 3D Printing Casting Medias and Binders Bob Wood, ExOne EOS M-‐System Material Handling -‐ IPCM Tyson Gregory, EOS of North America FDM Soluble Cores and Mandrels for Hollow Composite Structures Allen Kreemer, Stratasys 3:00pm -‐ 3:30pm Accelerating Product Development with 3D Injection Molding Derek Mathers, Worrell 3:30pm -‐ 4:00pm Enhancing the Lifetime of Your Vat John Schaefer, Somos® SLM Applications Michael Wais, SLM Solutions Metal Additive Manufacturing Safety Ulrich Albanus, Perry Leggett, Selective Laser Melting® Concept Laser System Demonstration -‐ 3D Printing at St. Cloud State SLM® 280HL What Happens When You University Jim Fendrick, Winthrop Metal Plate SL Parts? Bob Steffen, St. Cloud State Sheldon, Brad Mount, SLM Sean Wise, Repliform University Solutions Open System Demo 4:00pm 4:30pm 5:15pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm From Invention to Production: Additive Manufacturing at GE Healthcare Steve Abitz, GE Healthcare ExOne Grand Ballroom 7 Stop by to Explore Opportunities at GE Closed ACT Group Prodways Grand Ballroom 7 Grand Ballroom 8 Prodways: A New Way of MultiJet 3D Printing Producing the Future in David Moore, 3D Systems Additive Manufacturing Brian Bauman, Prodways Hewlett Packard Renishaw Engineering Grand Ballroom 7 Grand Ballroom 8 HP Multi Jet Fusion™ Technology: Open Platform (Solutions Workflows/Materials) Hewlett Packard Metal Powder Reuse in Additive Manufacturing Lucy Grainger, Renishaw Sessions End 4:00pm Buses leave at 5:15pm 2015 AMUG Dinner & Awards Banquet Location: It's a surprise! Transportation will be provided. All attendees of the AMUG Dinner and Awards Banquet are required to take the bus provided by AMUG. Please wear comfortable clothing and closed-‐toe shoes -‐ jeans and tennis shoes are ok! Please do not bring laptops or items that may need to be stored. Location of the Dinner and Awards banquet could be inside...could be outside...could be both! 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 3B -‐ Diamond and Platinum Sponsor Sessions Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registradon Required C Customers Only Session H Hands-‐on Training Wednesday, April 22, 2015 7:30am 8:00am 8:30am 9:00am 9:30am 10:00am 10:30am 11:00am 11:30am Breakfast (7:30am -‐ 8:30am) AMUG Updates The Innovators Showcase Join us for a one-‐on-‐one interview with Chuck Hull, Inventor of Stereolithography Location Grand Ballroom 4/5 Speakers Mark Barfoot Time 30 min Grand Ballroom 4/5 1 hr Chuck Hull / Todd Grimm Grand Ballroom 4/5 1.5 hr AMUG Board Break (10:00am -‐ 10:30am) AMUG Business Meeting -‐ Open to ALL AMUG Attendees AMUG Board: AMUG Board Updates, Financial Updates, Officer Elections Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm Sessions start promptly at 1:30pm TRACKS METALS EDUCATION LASER SINTERING CASTING (BEYOND) ENTERTAINMENT Location Grand Ballroom 4 Grand Ballroom 5 St Johns River Terrace 3 Daytona H! 1:30pm -‐ 2:00pm Design for Economical Metal A New Design Aesthetic and Additive Manufacturing the Future of Additive Steve Woods, GE Power and Manufacturing Water Advanced Robert Gerritsen, Mohawk Manufacturing Works College Further Insights in the Nature of 'Orange Peel' Felipe Amado, Manfred Schmid, Inspire AG, irpd The Use of Additive Optical and Electric Printing: Manufacturing in the Sand Software Challenges at Scale Foundry Karl D. D. Willis, John Danko, Danko-‐ Addimation, Inc. Arlington DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 2:00-‐2:15 2:15pm -‐ 2:45pm DMLM – It is Rocket Science – The Impact of FDM on The Next Generation Engineering Student Design AP Nylon 6 Casting -‐ Demo Designing for SLS Dennis Butenschoen, GPI Choices Mark Wynn, Dan Welker, Tharwat Fouad, Anubis3D Prototype & Manufacturing Cassandra Gribbins, Embry-‐ Yazaki North America Services Riddle Aeronautical University 2:45pm -‐ 3:15pm 3D Printing Technology for Facial Animation Brian McLean, Laika Break TRACKS METALS EDUCATION LASER SINTERING CONCEPT TO PART SOFTWARE WORKSHOPS Location Grand Ballroom 4 Grand Ballroom 5 St Johns River Terrace 3 Daytona Designing for the DMLS Process David Bentley, Proto Labs -‐ Fineline Additive Services How Predictive Simulations will Change the Additive Manufacturing Playing Field Brent Stucker, University of Louisville R! H! 3:15pm -‐ 3:45pm 3:45-‐4:00 4:00pm-‐ 4:30pm STRATASYS, Grand Ballroom 3, STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 AM -‐ Surface Finishing Trials & Tribulations of AM Technologies Training Development Steven Alviti, Bel Air Finishing Paul Parzuchowski, Linear Supply Mold & Engineering Additive Manufacturing: Improving the Care of our Mimics Training Wounded Warriors by Materialise Peter Liacouras, PhD, Danielle Beski, Materialise Kevin Wurth Walter Reed National Software to convert CT/MRI data Military Center SLS Build Preparation and to 3D models Setup for Beginners Jordan Weston, MSOE Chris Heinze, Stratasys Pre-‐Registration is required Direct Manufacturing Seating is limited Contact Abbey Delaney abbey.delaney@materialise.com 1 (734) 259-‐7030 Jigs and Fixtures Scott Plier, MSOE Class Time: 3:15pm-‐5:00pm DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 4:30-‐4:45 4:45pm-‐ 5:15pm Customized Mass-‐Production From Prototyping to Series Working with EOS P760 -‐ Comparison of Methods -‐ Hybrid Parts Using Additive Production – Additive Achieving High Quality to Add Electronic Manufacturing and Manufacturing of Aluminum Parts Functionality to 3D Plastic Injection Molding Components, Andreas Berkau, Michael Schnieder, Inspire Parts Soeren Griessbach, University citim AM Inc. AG, irpd Mike O'Reilly, Optomec of Applied Science Zwickau 5:15pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm STRATASYS, Grand Ballroom 3, STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 Sessions End 5:15pm Pizza Night and Networking Event Location: River Deck 2 6:00pm -‐ 10:00pm 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 4 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registraaon Required C Customers Only Session H Hands-‐on Training Wednesday, April 22, 2015 See previous page for morning and concurrent sessions Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY @ 1:30pm DIAMOND SPONSOR SESSIONS SPONSORS Location Stratasys Stratasys Somos® Concept Laser SLM Solutions GE ExOne Prodways Grand Ballroom 3 City Terrace 12 Grand Ballroom 6 Grand Ballroom 2 Grand Ballroom 1 Board Room 4 Grand Ballroom 7 Grand Ballroom 8 R! H! 1:30pm -‐ 2:00pm 2:00pm -‐ 2:15pm PLATINUM SPONSOR SESSIONS Finishing FDM Workshop Make the Most of FDM Parts Through Post-‐Processing Isaac Damhof, Stratasys C! Technology Agnosticism: Improving a Dairy Farm by Understanding Processes and Using 3D Printing Application-‐Based Decision Technology Making Don Portenga, Eagle Chuck Alexander, Stratasys Design Direct Manufacturing (session runs from 1:30pm -‐ 2:45pm) Concept Laser User Group The Intersection of Jet Printing of Highly Engines and Additive Conductive and Reflective Manufacturing Materials Andy Martin, GE Yun Bai, Virginia Tech Aviation Customer Session Latest and Greatest Oliver Edelmann, John Murray, Andreas Tulaj, Concept Laser Pre-‐Registration Required Contact Kim Killoran kimberly.killoran@stratasys.com +1 (952) 906-‐2232 Applications Driven By PolyJet Materials: What's Moving from MSDS to SDS New? Kevin Zaras, Somos® Susan York, Stratasys 2:15pm -‐ 2:45pm Trials and Tribulations of AM Training Development Paul Parzuchowski, Linear Mold (closed session for Concept Laser customers) Selective Laser Melting® System Demonstration -‐ SLM® 280HL Jim Fendrick, Winthrop Sheldon, Brad Mount, SLM Solutions Open System Demo 2:45pm -‐ 3:15pm ACT Group Prodways Grand Ballroom 7 Grand Ballroom 8 From Invention to Production: Additive Manufacturing at GE Selective Laser Sintering Prodways: A New Way of Healthcare with ProX Series Producing the Future in Steve Abitz, GE Healthcare Sandeep Rana, Additive Manufacturing 3D Systems Brian Bauman, Prodways Break (2:45pm -‐ 3:15pm) R! 3:15pm -‐ 3:45pm PolyJet Finishing 101 Meghan Rock, Stratasys What Happens When You Service and Support -‐ Combine Prodways Optimizing Your Experience Productivity with Somos® Ulrich Albanus, Barry Resetco, Performance? Concept Laser Arnaud Guedou, Prodways Metal AM Applications Dave Ciscel, CalRAM Industrial Implementation of Additive Manufacturing Ed Herderick, GE Hewlett Packard EOS of North America Grand Ballroom 7 Grand Ballroom 8 HP Multi Jet Fusion™ Technology Hewlett Packard 3:45pm -‐ 4:00pm ExOne Grand Ballroom 7 4:00pm-‐ 4:30pm Prodways: A New Way of Producing the Future in Additive Manufacturing Brian Bauman, Prodways PolyJet Metalizing Workshop: How to Simulate Metal Coatings Integrated Rapid Product Understanding of Material Development Properties Mike Siemer, Noble Scott Nordlund, Somos® Stop by to Explore Opportunities at GE Hands-‐on Applications with Metal Additive Manufacturing Perry Leggett, Concept Laser Pre-‐Registration Required 4:30pm -‐ 4:45pm (session runs from 4:00pm -‐ 5:15pm) Contact Melissa Pearlstein melissa.pearlstein@stratasys.com 4:45pm -‐ 5:15pm SLM Applications Michael Wais, SLM Solutions Implementation of AM Tooling at John Deere Eric Johnson, John Deere Creating Competitive Advantage for Profitable Growth Keith Hechtel, Curbell Selective Laser Melting® System Demonstration -‐ SLM® 280HL Jim Fendrick, Winthrop Sheldon, Brad Mount, SLM Solutions Open System Demo 5:15pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm Closed EOS M-‐System Basic User Machine Service Tyson Gregory, EOS of North America 1 hour session Industrial Metal Applications Roger Janssen, 3DX Hewlett Packard Prodways Grand Ballroom 7 Grand Ballroom 8 HP Multi Jet Fusion™ Technology: Open Platform (Solutions Workflows/Materials) Hewlett Packard Prodways: A New Way of Producing the Future in Additive Manufacturing Brian Bauman, Prodways Sessions End 5:15pm Pizza Night and Networking Event Location: River Deck 2 6:00pm -‐ 10:00pm 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 4B -‐ Diamond and Sponsor Sessions Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registraaon Required C Customers Only Session H Hands-‐on Training Thursday, April 23, 2015 7:30am 8:00am 8:30am 9:00am 9:30am 10:00am Breakfast (7:30am-‐8:30am) AMUG Conference Feedback Session and Closing KEYNOTE ADDRESS | Jason Lopes, Legacy Effects Location Grand Ballroom 4/5 30min Time Speakers Mark Barfoot Grand Ballroom 4/5 1 hr Jason Lopes Break (10:00am -‐ 10:30am) TRACKS GENERAL AEROSPACE EDUCATION CASTING Location Grand Ballroom 4 Grand Ballroom 5 River Terrace 2 River Terrace 3 R! H Cracking the Code to Production in ASTM F42 Committee on Standards AM: How Linear is Addressing Design for Additive Manufacturing -‐ for Additive Manufacturing -‐ Update Production in Aerospace DMLS -‐ The Designers Mindset Carl Dekker, Met-‐L-‐Flo Brandy Badami, Linear Mold & Chris McKee, COM DEV Ltd. Engineering 10:30am 11:00am ISO Certification. What does ISO Certification Mean for You? Panel Discussion Carl Dekker, Met-‐L-‐Flo TRACKS CONCEPT TO PART Foundry in a Box Steve Murray, Jack Ziemba 1.5hours please arrive early Limit 50 -‐ sign up on-‐site H! Post Processing Techniques Dan Hutchinson, Post Process 11:30am Part 1 Manipulation and Characterization of Armstrong Ti and Ti-‐6AI-‐4V Powders for AM Yingying Sun, RMIT University & CSIRO Why Does the Additive Manufacturing Industry Need Training? Paul Bates, UL STRATASYS, Grand Ballroom 3 ! STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 Increasing Production Throughput Art of Hybrid Manufacturing: with Electron Beam Melting for the Combining Additive and Subtractive Aerospace Components Manufacturing Frank Medina, Arcam Mike Panzarella, DMG Mori ASI Inc. DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY AT 1:30pm TRACKS CONCEPT TO PART AEROSPACE WORKSHOP CASTING Location Grand Ballroom 4 Grand Ballroom 5 River Terrace 3 River Terrace 2 H! H! AM Technologies Solutions in the Investment Casting Industry -‐ Emphasis on Turbo-‐Machinery, Pump & Valve and Oil Field Applications Mike Hascher, Eagle Engineered Solutions Part 2 Development of 3D Model for Cold Spray Additive Manufacturing Muhammad Faizan-‐Ur-‐Rab, Swinburne University of Technology / CSIRO TRANSPORTATION The "Acceleration" of Productivity Mark Bringle, Joe Gibbs Racing Microstructure Development of CoCr Super Alloy for EBM Additive Manufacturing Stefan Gulizia, CSIRO TRACKS Metals SOFTWARE CASTING Location Grand Ballroom 4 River Terrace 3 River Terrace 2 Post Processing Techniques Dan Hutchinson, Post Process 1:30pm -‐ 2:00pm 2:00-‐2:15 TRACKS 2:15pm -‐ 2:45pm Hydrographic Printing Ed Tackett, RapidTech (1 hour) Changing the Way Parts are Made -‐ Disrupting Traditional Manufacturing Methodologies Bill Dahl, Solidscape, Inc. 2:45pm -‐ 3:15pm 3:15pm -‐ 3:45pm DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 Break Metal 3D Printing -‐ Insights, Trends Additive Manufacturing of Precious Preparing an STL File to Build a 3D and Technologies Metal Items Printed Overmolded Part Tuan TranPham, Arcam Joseph Tunick Strauss, HLE Company Mark Abshire Casting the Future Jack Ziemba, Aristo-‐Cast, Inc. DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 3:45-‐4:00 TRACKS SCANNING 4:00pm-‐ 4:30pm Bobble-‐Head from Concept to Design Carlos Bolanos, Gary Rabinovitz, Reebok 4:30-‐4:45 4:45pm-‐ 5:15pm Hands-‐on Scanning: From Scan to Bobble Head (scan to software then print, and cleaning) 5:15pm 5:30pm 6:00pm -‐ 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Casting TBA David Tait, voxeljet STRATASYS, Grand Ballroom 3 STRATASYS, City Terrace 12 SOMOS®, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 3D Sand Printing for Your Metal Casting Needs Steve Murray, Hoosier Pattern Sessions End 5:15pm BBQ Dinner and Closing (6:00pm -‐ 10:00pm) Location: TBA Come help us celebrate and close out the 2015 AMUG Conference Register today at www.am-‐ug.com Page 5 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registraaon Required C Customers Only Session H Hands-‐on Training Thursday, April 23, 2015 See previous page for morning and concurrent sessions Break (10:00am -‐ 10:30am) 10:00am DIAMOND SPONSOR SESSIONS SPONSORS Location 10:30am -‐ 11:00am PLATINUM SPONSOR SESSIONS Stratasys Stratasys Somos® Concept Laser SLM Solutions GE ExOne Renishaw Engineering Grand Ballroom 3 City Terrace 12 Grand Ballroom 6 Grand Ballroom 2 Grand Ballroom 1 Board Room 4 Grand Ballroom 7 Grand Ballroom 8 Open Closed Characterization of Printing Parameters for Glass Ceramic Materials using Binder Jetting AM System Li Yang, U of L Renishaw New Products for Additive Manufacturing Robin Weston, Renishaw ACT Group EOS of North America Grand Ballroom 7 Grand Ballroom 8 PolyJet Customer Support at Stratasys: Communication, Training and Materials Amnon Hamani, Katherine Grinnell, Wesley Dangerfield, Stratasys Electromechanical Motor Fabrication Using Fused DSM Biomedical for 3D Printing Deposition Modeling Will van den Tweel, DSM David Espalin, W.M. Keck Center Biomedical for 3D Innovation at UTEP Service and Support Beyond The Standards (advanced session) Ulrich Albanus, Barry Resetco, Concept Laser R 11:00am -‐ 11:30am 1 on 1 File Processing for FDM and PolyJet 3D Ortho Lab, Digital Printing in Stratasys Application Engineers the Orthodontic Lab Shane Jordan, Specialty Pre-‐Registration Required Appliances Contact Bonnie Meyer bonnie.meyer@stratasys.com New Product Introduction M2 cusing Singlelaser, Multilaser, and X line 2000R John Murray, Zach Murphree, Concept Laser Open Open Industrial Implementation of Additive Manufacturing Ed Herderick, GE R 11:30am -‐ 12:00pm Silicone Molding with Stratasys Technology Produced Patterns Mark Bashor, Stratasys Open 1 on 1 File Processing for FDM and PolyJet Stratasys Application Engineers Pre-‐Registration Required Contact Bonnie Meyer bonnie.meyer@stratasys.com 1 hour session Everything You need to Know About Quality Management John Murray, Zach Murphree, Concept Laser Open R 12:00pm -‐ 1:30pm EOS M-‐System Parameter Editing Al Burchi, EOS of North America Open The Intersection of Jet Engines and Additive Manufacturing Andy Martin, GE Aviation Networking Lunch (12:00pm -‐ 1:30pm) River Deck 1 and 2 SESSIONS START PROMPTLY @ 1:30pm DIAMOND SPONSOR SESSIONS SPONSORS Location PLATINUM SPONSOR SESSIONS Stratasys Stratasys Somos Concept Laser SLM Solutions GE Hewlett Packard Renishaw Engineering Grand Ballroom 3 City Terrace 12 Grand Ballroom 6 Grand Ballroom 2 Grand Ballroom 1 Board Room 4 Grand Ballroom 7 Grand Ballroom 8 R 1:30pm -‐ 2:00pm Sand Casting Using Rapid Patterns Produced from Stratasys Systems Jay Beversdorf, Stratasys 1 on 1 File Processing for FDM and PolyJet Stratasys Application Engineers Pre-‐Registration Required Contact Bonnie Meyer bonnie.meyer@stratasys.com Scheduled Customer & Future Customer 1-‐1 Meetings Open R 1 on 1 File Processing for FDM and PolyJet Stratasys Application Engineers Sand Casting Tooling Mike Cayten, SST Foundry Pre-‐Registration Required Contact Bonnie Meyer bonnie.meyer@stratasys.com Open Metal Additive Manufacturing for the Production Environment Jonathan Porter, Renishaw ExOne Scheduled Customer & Future Customer 1-‐1 Meetings 2:45pm -‐ 3:15pm Reserve a meeting with a SLM representative at the conference or call +1 248-‐243-‐5400 Grand Ballroom 7 From Invention to Production: Additive Manufacturing at GE Healthcare Steve Abitz, GE Healthcare ExOne Open Discussion/Q&A Break (2:45pm -‐ 3:15pm) R 3:15pm -‐ 3:45pm Stop by to Explore Opportunities HP Multi Jet Fusion™ Technology at GE Hewlett Packard Metal Additive Manufacturing Safety Ulrich Albanus, Barry Resetco, Concept Laser 2:00pm -‐ 2:15pm 2:15pm -‐ 2:45pm Reserve a meeting with a SLM representative at the conference or call +1 248-‐243-‐5400 info@slm-‐solutions.us FDM Wish List: What do you want to see in the future? William Shultz, Stratasys 1 on 1 File Processing for FDM and PolyJet Stratasys Application Engineers Scheduled Customer & Future Customer 1-‐1 Meetings Open Reserve a meeting with a SLM representative at the conference or call +1 248-‐243-‐5400 Pre-‐Registration Required Contact Bonnie Meyer bonnie.meyer@stratasys.com ACT Group Prodways Grand Ballroom 7 Grand Ballroom 8 TBA Prodways: A New Way of Producing the Future in Additive Manufacturing Brian Bauman, Prodways Hewlett Packard Renishaw Engineering Grand Ballroom 7 Grand Ballroom 8 Stop by to Explore Opportunities at GE 3:45pm -‐ 4:00pm R 4:00pm-‐ 4:30pm PolyJet Wish List: What do you want to see in the future? Susan York, Stratasys 1 on 1 File Processing for FDM and PolyJet Stratasys Application Engineers Open Pre-‐Registration Required Contact Bonnie Meyer bonnie.meyer@stratasys.com Hands-‐on Applications with Metal Additive Manufacturing Perry Leggett, Concept Laser Scheduled Customer & Future Customer 1-‐1 Meetings Stop by to Explore Opportunities HP Multi Jet Fusion™ Reserve a meeting with a SLM at GE Renishaw Open Mic: Q&A and Technology: Open Platform representative at the conference Feedback Session (Solutions Workflows/Materials) or call +1 248-‐243-‐5400 Hewlett Packard 4:30pm -‐ 4:45pm Scheduled Customer & Future Customer 1-‐1 Meetings 4:45pm -‐ 5:15pm 5:15pm 5:30pm 6:00pm -‐ 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda TBA Reserve a meeting with a SLM representative at the conference or call +1 248-‐243-‐5400 Stop by to Explore Opportunities at GE Sessions End 5:15pm BBQ Dinner and Closing (6:00pm -‐ 10:00pm) Location: TBA Come help us celebrate and close out the 2015 AMUG Conference Register today at www.am-‐ug.com Page 5B -‐ Diamond and Platinum Sessions Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of March 23, 2015 R Pre-‐Registrabon Required C Customers Only Session H Hands-‐on Training Friday, April 24, 2015 7:30am 8:00am Location Duration Company Clearwater 3.5 hours SME R! SME Additive Manufacturing Certificate Program Pre-‐Registration Required Additional Cost for SME Course | $250 includes course review and test (special AMUG member pricing) This sessions is managed and provided by SME Information regarding the Certification Program, Testing and Costs can be found at: SME Course and Test Registration 8:30am -‐ 12:00pm NOTE: -‐ Pre-‐Registration is REQUIRED -‐ Additional costs apply to the Certification Review Course and Test -‐ SME is offering a discount to AMUG members for the Certification Review Course and Test at the AMUG Conference -‐ The SME Certification Course is separate from the AMUG Conference and payment for the certification program cannot be combined with the AMUG Conference registration payment -‐ Participants can choose to just take the Review Course, or both the Review Course and Test -‐ Certificates are provided by SME to those that pass the test on Friday -‐ Participants are required to bring a laptop with Wi-‐Fi capability to complete the test on Friday. Laptops will not be provided. 12:00pm 12:30pm 1:00pm 1:30pm 2:00pm 2:30pm 3:00pm 3:30pm 4:00pm 4:30pm 5:00pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm 10:00pm *Speakers and times are subject to change. 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 6 Questions? info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users
© Copyright 2024