Steampunk Ensemble pattern Notes: • • • • • • • Seam allowances are ¼” unless otherwise specified. Print the patterns with no scaling. There is a mark on each page showing an inch. Match that to a ruler and make sure it’s correct. Skirt patterns is designed to close flush in the back, so appropriate closures would be Velcro, buttons with loops or hooks and eyes. Corset pattern has an overlap, or you can eliminate ¼” from each side of the back piece to lace up with eyelets. Check my blog for more free patterns here: http://jenwrenne.wordpress.com This pattern is copyrighted by me and may not be shared or sold. If you sell things made from this pattern I would appreciate credit for the pattern design. Line up the jacket pattern pieces on the red line and tape before cutting This was designed on my MIM. Based on online measurements (that I have not verified), her measurements are similar to other immature-torso BJDs like Kaye Wiggs Nyssa and Bobobie Sprite. This chart can help you adapt the pattern to other dolls (my measurements): bust 16" MIM 14" Kish Chrysalis 14" Rosette 14" Betsy McCall waist inseam arm 7 6.25 6.5 5.25 btwn should 2.5 7 7.25 6.375 6.75 5.625 5 4.5 4.5 2.5 2.5 6.75 5.875 5 4 2.125 neckwaist 3.375 head Height 7.25 16 3 3 7 9 14 14 2.75 8.5 14 Prior sewing knowledge is assumed, but if you need help please email me: jenniebagrowski@hotmail.com Skirt measurements: • • • Pleated ruffle is 45” x 3” (fold and pleat following picture - you may have extra) Skirt is 8.5”x14” (shorten by 1” for Kish) Waistband is 7.25”x 1.25” Sew side and shoulder seams of main and lining. Sew together where you see in white: Clip, turn, press Sew lace to sleeves and gather top edge Set in sleeves Sew side seams and serge/zigzag Use a ruffle or a chopstick and make pleats Cut to fit skirt and attach Gather to waistband Sew corset pieces and lining together, sew around outer edge Leave opening to turn Corset pieces – cut 2 main and 2 lining except center front cut 1 on fold of main and lining