1. No category

Little Red Riding Hood
FREE PROJECT SHEET
•
888.768.8454
•
468 West Universal Circle Sandy, UT 84070
•
www.rileyblakedesigns.com
Little Red Riding Hood
FINISHED QUILT SIZE 46” x 46”
Finished Block Size 8” x 8”
Measurements include ¼” seam allowance.
Sew with right sides together unless otherwise stated.
Please check our website www.rileyblakedesigns.com for any
revisions before starting this project. This pattern requires a basic
knowledge of quilting technique and terminology.
FABRIC REQUIREMENTS
7/8 yard (80 cm) pink main (C3270 Pink)
½ yard (50 cm) white main (C3270 White)
¼ yard (20 cm) aqua scallops (C3272 Aqua)
1/8 yard (10 cm) green scallops (C3272 Green)
3/8 yard (30 cm) pink scallops (C3272 Pink)
3/8 yard (30 cm) green stripe (C3274 Green)
1/8 yard (10 cm) gray floral (C3275 Gray)
¾ yard (70 cm) green leaves (C3276 Green)
1/8 yard (10 cm) red leaves (C3276 Red)
Binding 5/8 yard (60 cm)
Backing 2¾ yards (2.5 m)
CUTTING REQUIREMENTS
Please read instructions first before cutting. Seam allowances
vary so measure through the center of the quilt before cutting
border pieces.
Star Block
Cut 9 squares 4½” x 4½” from white main (fussy cut)
Cut 24 squares 2½” x 2½” from aqua scallops
Cut 16 squares 2½” x 2½” from green scallops
Cut 16 squares 2½” x 2½” from gray floral
Cut 16 squares 2½” x 2½” from red leaves
Cut 36 rectangles 2½” x 4½” from green leaves
Cut 36 squares 2½” x 2½” from green leaves
Posts and Sashing
Cut 4 squares 1½” x 1½” from aqua scallops
Cut 6 squares 1½” x 1½” from green scallops
Cut 3 squares 1½” x 1½” from gray floral
Cut 3 squares 1½” x 1½” from red leaves
Cut 24 rectangles 1½” x 8½” from green leaves
1 Flying Geese Unit. Repeat to make 4 Flying Geese Units. Sew a
Flying Geese Unit to each side of a white main 4½” square. Sew
a green leaves 2½” square to each side of the 2 remaining Flying
Geese Units. Sew the 3 rows together to complete the Star Block.
Repeat to make 9 Star Blocks.
Flying Geese Unit
Star Block
Posts and Sashing
Refer to quilt photo for post placement. Sew an assorted print
1½” square to a green leaves 1½ x 8½” rectangle. Repeat to make
a row with 4 square posts and 3 sashing rectangles. Make 4 rows
labeled A.
Sashing and Blocks
Refer to quilt photo block placement. Sew a green leaves 1½
x 8½” rectangle to a Star Block. Repeat to make a row with 4
sashing rectangles and 3 blocks. Make 3 rows labeled B.
Quilt Center Assembly
See quilt photo for row placement. Lay out rows A and B. Sew
rows together to complete the center of the quilt.
Borders
Seam allowances vary so measure through the center of the quilt
before cutting border pieces. Sew border strips together end to
end if necessary to get the length needed. Sew side borders first.
Border 1
Side borders should be 28½”. Top and bottom borders should be
32½”.
Border 1
Cut 4 strips 2½” x WOF from pink scallops
Border 2
Side borders should be 32½”. Top and bottom borders should be
36½”.
Border 2
Cut 4 strips 2½” x WOF from green stripe
Border 3
Side borders should be 36½”. Top and bottom borders should be
46½”.
Border 3
Cut 5 strips 5½” x WOF from pink main
QUILT ASSEMBLY
Refer to quilt photo for placement of fabrics and blocks.
Finish quilt by layering the quilt top, batting, and back. Bind with
your favorite Riley Blake fabric from the Little Red Riding Hood
Collection. Have fun with your colors and enjoy the journey of
making your quilt.
Star Block
These instructions are to make 1 block. Refer to the Star Block
diagram for piece placement as each block is a different
combination of fabrics. Draw a line from corner to corner on the
wrong side of an assorted print 2½” square. Place the assorted
print square in the corner of a green leaves 2½” x 4½” rectangle
and sew on the line. Leave a ¼” seam allowance and trim excess.
Press. Repeat on the other side of the rectangle. This will make
©2013 Riley Blake Designs and Tasha Noel. Quilt Design by Jina Barney.