1. No category

ADOBE® CONNECT VISUAL QUICK START GUIDE How to Participate Online To allow users to attend and participate in our INSS Conference, we will be using Adobe Connect. ntering in your First and LastUse the information below prepare for the meeting and to take part April 8-­‐11, 2015. n page. This takes you to Adobe Connect is an enterprise web conferencing solution for online meetings, eLearning and you can verify that your
webinars used by leading corporations and government agencies. nts. If you do not pass the test
u need to do.
not blocking your meeting This Visual Quick Start Guide provides you with the basics to begin participating in an Adobe Connect meeting. This guide includes instructions on testing Adobe Connect on your computer solve this in Internet Explorer,
prior to the meeting, setting up audio, joining a meeting, and meeting participation options. ed tab. Then enable the
ections. After doing this, clear
and attempt to re-enter theI.
Test Adobe Connect meeting on your computer on and your computer’s Adobe Connect requires an internet connection (preferably wired, to improve quality) and web browser with Adobe Flash Player. It supports almost all operating systems (Mac, Windows, Linux, Solaris) and the most popular browsers (Firefox, Chrome, Safari, and Internet Explorer). There ovided teleconference
o dial in via telephone to hear
are also apps available for Apple, Blackberry, and Android mobile devices. ry the following tasks:
Tip: Close other programs, particularly web apps like email and chat that compete for bandwidth for a better Adobe Connect experience. is not muted.
To do this, select Meeting
s you through five steps in 1. It is recommended that you test your computer prior to attending a meeting. You can do l VoIP.
this by going to http://admin.adobeconnect.com/common/help/en/support/meeting_test.htm h Player access to your
ht click in the meeting
ur Flash Player settings. In the
2. The Connection Test checks your computer to make sure all system requirements are met. If you pass the first three steps of the test, then you are ready to participate in a meeting. We n, try the following:
recommend that you complete the fourth step of the Connection Test which is the Adobe of the Share pod.
Connect Add-­‐in, which may enhance your meeting experience particularly in using a webcam. od options menu in the top
ange View > Zoom In.
3. If you do not pass the test, perform the suggested actions and run the test again. 4. You also must test audio and video by going to ct User
http://inss.adobeconnect.com/testing/ ahead of time (no one else will be there) and clicking on Meeting, then Audio setup wizard and run through the prompts. Also, please click on the webcam icon to test your webcam. This will prevent technical problems. The setup guide below for participants may also help you troubleshoot connection problems. y the following:
Page 1 of 4
II.
Join the meeting Click on this link to join the conference: http://inss.adobeconnect.com/inss2015/
Choose “Enter as Guest” and make sure to type your first and last name. Once you click “Enter Room,” it may take a moment to join the room as we will be approving each participant’s entry. Tip: If you are having trouble entering the room, please try another browser before contacting support. If you have to leave the phone conference call for any reason, please close the browser with Adobe Connect, and restart the process for connecting with step 1 above under join the meeting. It is recommended to use a headset with microphone. NOTE: Please remember to mute your microphone when not speaking. Using VOIP or Adobe Connect web audio, you can hear meeting audio through your computer speakers. If a meeting attendee is speaking using VoIP, you will see a microphone icon next to their name. In some cases, meeting hosts may give you the ability to broadcast audio using VoIP. When this is the case, a dialog will alert you that you have the rights to use your microphone. Clicking the Speak Now link will activate the microphone icon in the Application Bar at the top of your screen. III.
Share webcam video The meeting host may ask you to use your webcam to share video. When this is the case, a button enabling you to share your webcam will appear on the video pod. To share your camera, make sure your webcam is plugged in and click the Share My Webcam button. Adobe Flash may prompt you for permission. After granting permission, a webcam video preview appears. If you’re happy with the preview, click Start Sharing to share your video with all participants. You can also click the webcam icon in the Application Bar to access your webcam and preferences. Having your webcam on at all times will decrease the quality of the meeting’s videostream. We recommend you leave your webcam off unless instructed to improve video quality. Page 2 of 4
prompt you forprompt
permission.
After granting
a
you for permission.
After permission,
granting permission,
a
webcam videowebcam
previewvideo
appears.
you’re happy
previewIfappears.
If you’rewith
happythe
with the
preview,
click
Start
Sharing
to
share
your
video
with
all
preview, click Start Sharing to share your video with all
participants. participants.
You can also click the webcam icon
Name
2. Clic
the Te
comp
you w
in the
You can also click
the webcam
icon your webcam
in the
Application
Bar to access
and preferences.
Application Bar to access your webcam and preferences.
3. Ma
windo
Change your status
IV.
Participating in Adobe Connect Change
your
status
Within
a meeting, you can also change your status to
provide feedback to the presenter and other attendees.
Within a meeting, you can also change your status to
Change your status or request o peak To tchange
your
status, click
arrow
on the Status
provide
feedback
to sthe
presenter
andthe
other
attendees.
Options dropdown list on the Application Bar and select
Within a meeting, you can also c
hange y
our s
tatus t
o provide desired status option.
To change youryour
status,
click the arrow on the Status
feedback to the presenter and other athe
ttendees. Options dropdown
list onan
Application
Bar
and
If you
select
option
above the line
such
as select
Agree or Step
you status remains until you choose Clear Status.
your desired
option.
To change your status, click status
tAway,
he a
rrow o
n t
he S
tatus O
ptions If you choose an option below the line such as Speed Up
Applause,
status
automatically
itself
after
a
dropdown list on tIfhe pplication Bar ayour
nd select your dclears
esired status youAselect
anoroption
above
the
line
such
as Agree
or
Step
number of seconds.
Away, you status
remains until you choose Clear Status.
option. If you choose an
option
below
the line
as Speed
When
you set
your status,
an such
icon appears
nextUp
to your
or Applause, your
automatically
namestatus
in the Attendees
pod. clears itself after a
number of seconds.
If you select an option above the line such as Agree or Step Away, When
you
set your
status,
an icon
appearsIf next
tocyour
you status remains until you cChat
hoose Clear Status. you hoose an option below the line such as name in the Attendees pod.
send aa
message
to everyone,csimply
type
your message
Speed Up or Applause, your sTotatus utomatically lears itself after a number of seconds. in the chat pod and hit enter or click the send icon.
If the meeting host has enabled private chat, you can
Chat
When you set your status, an send
icon appears next to your name messages
to a specific
attendee
or group
withinin thethe Attendees pod. meeting. To do this, use the Attendees pod to hover over
To send a message
to
everyone,
simply
type
your
message
the name of the attendee you’d like to chat with, and select
intthe
podStart
andoPrivate
hitaenter
click the send
Alternatively,
youicon.
can use the Pod
Chat (another way o cchat
omment r sk Chat.
a or
question) Options menu in the top right hand corner of the pod to
select
an
individual
or
group
by
clicking
To send a message to meeting
everyone, simply type your message in tWith.
he If the
host has
enabled
private
chat,
youStart
canChat
Private
chat messages
showor
upgroup
in additional
tabs
to make it
send
messages
to
a
specific
attendee
within
the
chat pod and hit emeeting.
nter or To
click t
he s
end i
con. easy
to distinguish
between private and public chat.
do this, use the Attendees pod to hover over
the name of the
attendee
you’d
like to
with,
If the
host is using
a Q&A
podchat
instead
of aand
Chatselect
pod,
then allAlternatively,
messages are moderated
and private
chat is not
Start
Private
Chat.
you
cancuse
the
Pod
If the meeting host h
as e
nabled p
rivate c
hat, y
ou an s
end available.
Options menu in the top right hand corner of the pod to
messages to a specific attendee group ithin Start
the m
eeting. select an
individualoorr group
byw
clicking
Chat
With. To Private
chat
messages
show
up
in
additional
tabs
to
do this, use the Attendees pod to hover over the name of make
the it
easy to distinguish between private and public chat.
attendee you’d like to chat with, and select Start Private Chat. If the host is using a Q&A pod instead of a Chat pod,
Alternatively, you then
can alluse the Pod Options menu in the top right messages are moderated and private chat is not
available.
hand corner of the pod to select an individual or group by clicking Start Chat With. Private chat messages show up in additional tabs to make it easy to distinguish between private and public chat. V.
Troubleshooting Issue Solution I cannot get into If you are having trouble joining a meeting try the following: the meeting 1. Enter the meeting as a Guest user by entering in your First and Last Name in the Guest field. 2. Click the Help link on the Meeting Login page. This takes you to the Test Meeting Connection page where you can verify that your computer meets all necessary requirements. If you do not pass the test you will be given instructions for what you need to do. 3. Make sure popup blocking software is not blocking your meeting window. 4. You may be using a proxy server. To resolve this in Internet Explorer, select Tools > Internet Options > Advanced tab. Then enable the setting Use HTTP 1.1 through proxy connections. After doing this, clear your cookies, close all browser windows and attempt to re-­‐enter the meeting. I cannot hear 1. Verify that your computer speakers are on and your computer’s volume is any audio at an audible level. 2. Check to see if the meeting host has provided teleconference information. If this is the case, you need to dial in via telephone to hear meeting audio. Page 3 of 4
4. Yo
selec
settin
your
meet
I cannot
hear any
audio
1. Ve
volum
I cannot
hear any
audio
2. Ch
inform
meet
I have been
If you are
granted
1. Ma
rights to
speak, but
no one
can been 2. RuI
I have
> Au
hear me
granted
which
rights to
speak, but
no one can
hear me
The host is
sharing their
screen, but
it is fuzzy
3. Yo
comp
windo
dialog
If you are
1. Cl
2. Vi
right
The host is
I
sharing
Learn
More their
screen, but
You
find additional res
it can
is fuzzy
Community at www.conne
Learn More
You can find addit
Community at ww
I have been If you are having trouble sharing your voice try the following tasks: granted rights 1. Make sure your computer microphone is not muted. to speak, but no 2. Run through the Audio Setup Wizard. To do this, select Meeting > Audio one can hear Setup Wizard. The wizard guides you through five steps in which your me computer is tuned for optimal VoIP. 3. You may have elected to deny the Flash Player access to your computer’s microphone. To verify this, right click in the meeting window and choose Settings to view your Flash Player settings. In the dialog box, choose Allow. The host is If you are having trouble seeing a hosts screen, try the following: sharing their 1. Click the Full Screen button on the top of the Share pod. screen, but it is 2. View the full resolution by using the pod options menu in the top right fuzzy hand corner of the pod to select Change View > Zoom In. My image will If you are having trouble sharing your camera try the following tasks: not show up 1. Ensure that your camera is plugged in and recognized by the computer when I choose before entering the meeting. If not, camera drivers might need to be "Start my updated or installed. camera and 2. Also be sure to “Allow” the Adobe Flash Player for the camera and voice." microphone in the dialog box that appears when starting the broadcast. To verify this, right click in the meeting window and choose Settings to view your Flash Player settings. Select the Privacy tab (screen with eye icon) and in the dialog box, choose Allow. 3. You can also verify the correct devices are selected in the Adobe Flash Player by right clicking in the meeting window and choose Settings to view your Flash Player settings. Then select the Camera tab and check that your camera is selected in the dropdown menu. 4. You may need to install the Adobe Connect Add-­‐In. A prompt to install the add-­‐in is usually in the upper right corner of the meeting interface denoted with a blue downward arrow. 5. Make sure your webcam is not being used by another application such as Skype, AIM, Yahoo! Messenger, etc. VI.
Learn More You can find additional resources by visiting the Adobe Connect User Community at www.connectusers.com Support is available by phone 24 hours a day, seven days a week at the Technical Support and In-­‐ Meeting Support phone numbers for your region: http://www.adobe.com/go/connecthostedsupport Should you have any difficulty accessing the online meeting room or participating during the meeting please email aaronkforsyth@gmail.com. Please indicate a phone number where you can be reached. Page 4 of 4