T E C H N I C A L D ATA S H E E T Long Jumper Cables Rev.: 00/2012-10-19 1/2 Soldered Jumper Cables up to 20 meters EUPEN offers a wide range of jumper cables with 1/2” Hiflex cable (5092 / EC4-50-HF) or 1/2” standard cable (5128 / EC4-50) with soldered connectors*. In particular, we offer “long” jumpers (more than 10 meters). All metal contact parts are silver plated. They are designed for watertight applications and optimised jumper cable performances. Also available with one loose connector. Features • excellent return loss values • very low PIM • easy, fast and reliable installation • water tightness according to IP67/IP68 (mated connectors) • longitudinal water tightness is provided by the special connector design (O-Ring in connector head) • the overmolding of the connector provides an additional mechanical protection • length: 10, 15 or 20 meters (other lengths possible on request) Product reference EC4-vv-S-www-DyzDyz EC4-vv-SL-www-DyzDyz EC4 = vv = S= SL = 1/2” cable (5128) HF for Hiflex (5092) soldered connectors both sides first connector soldered, second connector delivered loose www = length in cm D= Connector DIN 7-16 type y= M for male or F for female z= L for right angle connector (z = nothing for straight connector) Marking Soldered Jumper Cables up to 20 meters • Manufacturer EUPEN • Week & Year of Production • Product Ref.: for ex.: EC4-HF-S-200-DMDM • Torque • Product Nr. EUPEN • Serial Number * see our datasheet “Soldered Jumper Cables” for an overview of the other possibilities ISO Certified Company KabelwerK eupen aG - Malmedyer Straße 9 - 4700 eupen - belGIuM Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail: info@eupen.com T E C H N I C A L D ATA S H E E T Long Jumper Cables Rev.: 00/2012-10-19 2/2 Soldered Jumper Cables up to 20 meters TECHNICAL DATA Cable type EC4-50-HF (5092) 1/2”-HIFLEX Electrical • Nominal impedance [Ω] • Frequency range [MHz] • PIM ratio (2 x 20 W carrier) [dBc] • Attenuation per m at 20 °C [dB] - without connectors* 960 MHz 1880 MHz 2200 MHz 2600 MHz • RF Voltage rating (Peak) [V] • Relative propagation velocity [%] 50 ±1 10 - 2700 ≤ -155 (Typical -163) Mechanical • Minimum bending radius [mm] - single - repeated • Connector torque (nominal) [Nm] - DIN 7-16 connector - N type connector Environmental • Temperature range [°C] - installation - operating • Protection against water ingress - Longitudinal water tightness • General environmental • RoHS compliance (EU Directive 2002/95/EC) Maximum power rating [W] ** Connector 1 Connector 2 Reference 7-16 7-16 ...-DyzDyz Return loss [dB] (VSWR) up to 20 meters Connector 1 Connector 2 Reference 7-16 7-16 ...-DyDy ...-DyDML EC4-50-(5128) 1/2” 0.106 0.151 0.170 0.187 1130 82 0.071 0.103 0.113 0.123 1600 88 30 30 70 125 28 12 28 12 -40 to +60 -55 to +85 Water tightness acc. to IP 68 (0.5 bar / 24 h) Two O-rings in the DIN 7-16 connector head Corrosion and UV resistant YES 0.8-1.0 GHz 880 1.7-2.2 GHz 560 2.5-2.7 GHz 500 0.8-1.0 GHz 1090 1.7-2.2 GHz 710 2.5-2.7 GHz 630 0.8-1.0 GHz 1.7-2.2 GHz 2.5-2.7 GHz 0.8-1.0 GHz 1.7-2.2 GHz 2.5-2.7 GHz >32 (<1.05) >29 (<1.075) >27 (<1.095) >32 (<1.05) >29 (<1.075) >27 (<1.095) >30 (<1.065) >27 (<1.095) >25 (<1.12) - Soldered Jumper Cables up to 20 meters * Typical values without connectors, the typical connector attenuation (2 connectors) is less than 0.02 [dB] ** Ambient temperature = 40 °C; Temperature of inner conductor = 100 °C; VSWR = 1.0; no solar loading ISO Certified Company KabelwerK eupen aG - Malmedyer Straße 9 - 4700 eupen - belGIuM Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail: info@eupen.com