Download Report

Welcome to 'The Pipeline News' – April 2015
Mactech Europe at
SPE Offshore Europe in Aberdeen - Stand 4D191
Aberdeen Offices Opening Shortly
Mactech Europe are pleased to announce the opening of their Operations Centre in
Aberdeen. Located close to the airport it will provide its new and existing client
operations, both on and off-shore, with fast, effective and easily accessible rental
machines, on-site machining, and decommissioning support services.
Peter Sheves is the Aberdeen Base Operations Director. He is located at the new
offices and is available now by email at peter.sheves@mactecheurope.co.uk if you
would like to discuss a project.
Peter brings decades of specialist knowledge to Mactech Europe and will enhance
the existing high standards of quality and services that are currently being
provided. Read more about Peter in the newsletter.
In driving their ‘Supply Partner Culture’ Mactech Europe will be increasing the
number of machines readily available for rent or purchase from this location, they
will include:-
Diamond Wire Saws
Clamshell Portable Lathes
Flange Facing Machines
Bolt Tensioning Services
Line Boring Machines
I.D. Sever Machines
Dual Pin Drills
Gantry Mills
Flange Facing Machines
Pipe End Cutting & Preparation
If you would like more information or want to make an early rental booking for 2015
then call Mark Davies - Business Development Director in the first instance on + 44
(0) 1260 253 846 or email him at mark.davies@mactecheurope.co.uk
Thank you for reading our newsletter and your continued support.
Mactech Europe - Partnering and Providing Choices!
Aberdeen Operations Centre
On-Site Machining & Offshore Services
Peter Sheves
... New Aberdeen Operations Base Director
To support the development of Mactech Europe’s
Aberdeen operations facility and oversee the
introduction of the Mactech Offshore range of
Diamond Wire Cutting equipment, which has been
proven over years of operation in the US Gulf, the
services of Peter Sheves have been secured.
Having previously managed Hydratight’s Aberdeen
operations base and latterly overseen the
development and growth of Mach-Ten into its current
Stork guise, Peter brings decades of specialist
knowledge to Mactech Europe and will enhance the
already existing high standards of quality and
services being provided, with the additional benefits
of having all stocks being located locally at our new
Dyce operations facility.
Email here peter.sheves@mactecheurope.co.uk
SPE Offshore Europe in Aberdeen - Stand 4D191
Diamond Wire Saws
... manpower & machine resources available now!
Mactech offers a range of Diamond Wire Saw Cutters for subsea and topside cutting
of a variety of materials and projects. Ideal for cutting multi-string applications or
heavy wall legs and cross members. Typical uses include offshore
decommissioning, and subsea or topside maintenance. The compact and robust
design creates an ideal cutting environment, reducing setup, installation, and
removal time – saving you time and money.
Key Features Include
•
•
•
•
•
•
Use for cutting multi-string casing, structures and any large, heavy
material. All models can cut in any orientation.
Models available to cut 4½ to 102 inch pipe and structures
Rigid frames makes repeatability and back-cutting easier and more accurate
Powerful drives cut through the toughest steel aggregates, with less hangups
Compact and lightweight designs takes less deck space and reduces
excavation for BML cuts
Continuous loop diamond wire resistance brealding, makes multiple cuts
with a single wire. Cuts faster and lasts longer than electroplated / sintered
wire
Need more information click HERE
Located in Aberdeen - Sales | Rentals | Service
NEW - Hydraulic Power Unit
... system pressure of 120 bar - flow rate 43.5 litres per minute
The Mactech Hydraulic Power Unit is a general
purpose portable source of hydraulic power. It is
driven by a 7.5KW 415 volt 3 phase 50hz electric
motor giving a system pressure of 120 bar with a
flow rate of 43.5 litres per minute.
Standard oil tank capacity is 180 litres of type
VH-46 hydraulic oil.
The H.P.U. is of compact design measuring 800
wide x 600 deep x 1200 high and weighs 220 Kg
empty.
Typically the HPU can be used to power the
Mactech (Europe) Ltd range of End Prepping
Machines and Clamshell lathes when they are
fitted with the hydraulic motor option. They can
also drive the hydraulic motors of milling rails,
gantry mills, boring bars and drilling machines.
On-Site Repair & Maintenance | Offshore Decommissioning
Clamshell Lathes
... manpower & machine resources available now!
Mactech Europe have the capability to cut pipes of most diameters and wall
thickness on-site thanks to our wide range of OD mounted Clamshell Pipe Cutting
Machines and our internally mounted End Prep Machines. These machines are able
to machine a broad spectrum of materials such as but not limited to; cast iron, carbon
steel and stainless steel, including Super Duplex, form 4" to 60" with customised
specials up to 110"
SPE Offshore Europe in Aberdeen - Stand 4D191
Controlled Bolt Tensioning
... technicians are qualified to TMJ1, 10, 11, 18, 19 and 20
Whether your application requires hydraulic torque or hydraulic bolt tensioning,
Mactech Europe has the resource available to meet the demands of the
customer. Our competent multi skilled technicians are qualified to TMJI 10, 11, 18,
19 and 20 certification to ensure they work safely and efficiently whilst delivering a
value for money service each and every time.
Need more information click HERE
Located in Aberdeen - On-Site Repair & Maintenance Service
SPE Offshore Europe
... come and meet us at stand 4D191 in the USA Sector
Come and see our latest machines and
diamond wire saws for sale or rent at the
SPE Offshore Europe Conference &
Exhibition on 8th to 11th September
2015 in Aberdeen.
Meet to discuss Mactech Europe and the
complete range of On-Site & Offshore
Machining Services.
STAND 4D191 in the USA Sector
Located in Aberdeen & Macclesfield
Sales | Rental | Service
Specialist On-Site Machining Services
... ... ... call + 44 (0) 1260 253846
•
•
•
•
•
Offshore
Oil & Gas
Subsea
Engineering
Fabrication
•
•
•
•
•
Petrochemical
Decommissioning
Power Generation
Shipbuilding
Wind Farms
Would you like more information or to discuss a particular project then call + 44 (0)
1260 253846 or email us at info@mactecheurope.co.uk
Mactech Europe - Rent or Purchase Machines Today
If you need any support or have a technical
question then contact our team who will be only
too pleased to help you:Mark Davies - Business Development Director
Rick Betteley - Operations Director | Macclesfield
Pete Sheves - Base Director | Aberdeen
Glynn Johns - Technical Sales Manager
George Cornelius - Marketing Department
Unsubscribe from this newsletter