Flame-Polishing Equipment PRECISION UNDER YOUR CONTROL LIGHT TORCH, ACCURATE FLAME – BEST POLISHING RESULTS Instead of bottled gas: The micro-flame gas generator produces by electrolysis a hydrogen-oxygen mix, which burns away to nothing. The very light torch with flexible gas hose facilitates effortless work and thus higher productivity. Compared to the work with oxyacetylene blowpipes, the risk of initial edge fusing is much reduced in case of flame polishing. Low operating costs and hazard potential in comparison to working with pressure cylinder gas. Micro-flame polishing equipment MIG-O-MAT Micro-Flame Gas Generators* of type «Lötstar» are not only used for soldering and welding since many years, but also for flame polishing of acrylic glass, and with outstanding results. • Improved work results by a much reduced weight of the torch, ensured constant gas composition and easily reproducible and accurate flame geometry FLAME-POLISHING OF BORE HOLES FOR ACCURATE WORK COST-EFFECTIVE ECOLOGICALLY FRIENDLY • High acceptance by the operating personnel because of easier work also during continuous operation PRODUCTIVE • Minor safety-related limitations regarding the installation site in comparison with compressed gas cylinders SAFE • Equipment with different gas output for variable nozzle sizes and for multi-user operation • Low operating costs and high availability FLAME-POLISHING EQUIPMENT MADE IN GERMANY • Easiest operation by microprocessor control with free preselection of the desired gas pressure • Reduced maintenance effort by automatic refill unit for the distilled water in case of Lötstar 245 (optional equipment on customer request) and in case of Lötstar 600 (standard equipment) • High working safety because of the separate safety pressure controller, temperature control, flashback arrester, and thermally controlled gas flow. • Execution to German building regulation DIN 32 508 and accident prevention regulation BGR 500 Maximum gas output [l/min] Lötstar 145 Lötstar 176 Lötstar 245 Lötstar 600 120 170 200 600 MIG·O·MAT® Mikrofügetechnik GmbH · Werksstraße 20 · 57299 Burbach Phone +49 (0) 2736 4154-0 · Fax +49 (0) 2736 4154-99 · E-Mail info@mig-o-mat.com www.mig-o-mat.com