Special Materials Compact, efficient sample cooling for high flow gases and liquids Features  Single helical coil design  Available in a wide variety of exotic alloys for better corrosion resistance  Retained shellside gasket reduces re-assembly time  Formed shell eliminates top shell flange weld interfaces  304 SS mounting bracket can be installed without loosening flange bolts Description The Sentry® FSR series sample cooler is a compact sample cooler that provides broad application flexibility through the use of a variety of sample tube materials. Optimal service for flows below 2000 cc/min for single phase heat transfer. Special materials include 310 SS, titanium, Hastelloy® C and nickel alloys listed in the specifications. Standard tube side materials are 316/316L SS and Alloy 625 (e.g., Inconel®). Please see data sheet 4.4 for more information on standard materials. Performance Curve - Water Model FSR-6225 ss ur op (P SI ) 10 60 o C) 50 15 20 1 0o F 30 Dr 60 0o F( 20 e 40 o 0 F 0 (2 o 4 C ) 2 10 o F (1 300 5 o C) 3 49 o (93 C) o 200 F o C) . 150 F (66 Inlet Temp o 0 4 400 600 0.1 800 0.2 60 www.sentry-equip.com 1 PSI = 0.069 Bar Consult Sentry for low-flow condensing applications. re Approach Temperature (oC) NOTE: Not recommended for steam condensing service. See TLR, FLR, FXR series sample coolers for steam applications. Approach Temperature (oF) 40 eP 0 Pressure Drop (PSI) pl 31 6o C) m (2 25 Sa 700 o F( 50 371 o C) Surface Area 1.7 Ft.2 [0.16 m2] 12 GPM [45 L/min] Cooling Water at 95oF [35oC] 9.5 PSI [0.66 Bar] Pressure Drop 80 1000 1200 CCM 1400 0.3 GPM 1600 0.4 1800 2000 0.5 100 120 140 160 180 200 220 240 260 280 Lbm/Hr Flow Rate 4.9 Rev. 8 9/13 FSR sample cooler (Special Materials) FSR Sample cooler 1�⁄��" [30 mm] 1��⁄��" [45 mm] ¾" FNPT cooling water outlet 1½" [37 mm] 1⅟��" [26 mm] 5⅝" [143 mm] ¼" [6 mm] ¼" [6 mm] ¾" FNPT alternate cooling water inlet 5⅝" [143 mm] Sample Outlet ⅜" OD tube Sample Inlet ⅜" OD tube 3½" [89 mm] 5¼" [133 mm] 2¼" [57 mm] 13¼" [337 mm] �⁄��" [5 mm] 4" [102 mm] 3⅛" [79 mm] Mounting Bracket (supplied with each cooler) ¾" FNPT cooling water inlet Specifications – FSR Series (special materials) Model No. Shell Design Tube Design FSR-6251 450 psi @ 650ºF 1500 psi @ 1000ºF 31 bar @ 343ºC FSR-6261 450 psi @ 500ºF 31 bar @ 260ºC FSR-6272 450 psi @ 650ºF 31 bar @ 343ºC FSR-6283 FSR-65J4U 103 bar @ 538ºC 800 psi @ 500ºF Tube Material* 310 SS Shell Material 304 SS 3/8" O.D. x 0.049"AW Titanium 55 bar @ 260ºC 3/8" O.D. x 0.035"AW 2400 psi @ 1000ºF Hastelloy®C276 172 bar @ 538ºC 3/8" O.D. x 0.035"AW 450 psi @ 650ºF 3000 psi @ 800ºF Monel® 400 31 bar @ 343ºC 207 bar @ 427ºC 3/8" O.D. x 0.049"AW 300 psi @ 600ºF 4000 psi @ 600ºF Super Duplex UNS S32750 21 bar @ 315ºC 276 bar @ 315ºC 3/8" O.D. x 0.049"AW Area 1.7 ft2 0.16 304 SS 1.7 ft2 0.16 304 SS 1.7 316 SS 1.7 m2 ft2 0.16 304 SS m2 m2 ft2 Shipping Weight Part Number 24 lbs 7-03954R 11 kg 24 lbs 11 kg 24 lbs 7-03954J 11 kg 24 lbs 0.16 m2 11 kg 1.7 ft2 24 lbs 0.16 m2 11 kg 7-03954T 7-03954P *Contact Sentry Equipment for optional tube materials. NOTES: • U in model number denotes ASME stamped model. • Canadian Registration Number available for ASME models only. Consult factory for CRN and other options and information. • Vessels are exempt from CE marking per PED 97/23/EC, TÜV. Vessels are below or equal to the limits set forth in Article 3, Sections 1.1, 1.2, 1.3 and Section 2 as applicable, and are designed and manufactured in accordance with sound engineering practice (meets the general requirements of the ASME Section VIII, Division 1, Boiler And Pressure Vessel Code). Nameplate will bear the name of Sentry Equipment Corp and safety instructions will be included per Article 3, Section 2. • Inconel and Monel are registered trademarks of Huntington Alloys Corporation. • Hastelloy is a registered trademark of Haynes International, Inc. It is solely the responsibility of the end-user, through its own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied, properly maintained, and limit their use to their intended purpose. Improper selection, installation, or use may result in personal injury or property damage. SENTRY EQUIPMENT CORP For further information, contact: 966 Blue Ribbon Circle North Oconomowoc, WI 53066 USA Tel: 262-567-7256 • Fax: 262-567-4523 E-mail: sales@sentry-equip.com Website: www.sentry-equip.com © Sentry Equipment Corp 2010 4.9 Rev. 8 9/13