TP 41-4 10/2014-E LED NOVA 150 Performance paired with economy LED NOVA 150 Performance paired with economy LED NOVA 150 offers durability, modern technology, and ease-of-use in an economic and compact package. At a light output exceeding a halogen light source of 150 W, the device is suitable for use in various medical specialties, particularly for procedures in smaller cavities. LED technology achieves a higher light output than conventional halogen light sources while consuming very little power; LED NOVA 150 therefore combines economic efficiency with ecologic sustainability. In combination with C-CAM® and C-HUB® II, this light source is an essential component of the imaging system for physicians in private practice. 2 3 Power switch Brightness control Light adaptor Advantages of LED NOVA 150: • Very economic, thanks to attractive purchase price and low operating costs • Very long, average lamp life of 30,000 hours requires almost no lamp changes • Extremely quiet operation with low heat generation; ideal for use in private practice • Natural color rendition with much higher, more homogenous illumination • Infinitely variable brightness control for fine adjustments • Very high energy efficiency thanks to latest LED technology • Environmentally friendly and easy to recycle as LEDs are free of lead and mercury Cold Light Fountain LED NOVA 150 20 1612 01 Cold Light Fountain LED NOVA 150, power supply 100 – 240 VAC, 50/60 Hz including: Mains Cord Cold Light Fountain Power LED 175 20 1614 01-1 Cold Light Fountain Power LED 175 SCB, with integrated KARL STORZ-SCB, high-performance LED and one light outlet, power supply 110 – 240 VAC, 50/60 Hz including: Mains Cord SCB Connecting Cable, length 100 cm 4 5 C-CAM® Camera Head 20 2901 32 C-CAM® Camera Head, 8-pin, one-chip CMOS camera head, resolution 640 x 480, focal length f = 20 mm, compatible with C-HUB® 20 2901 01 and 20 2903 20 as well as C-MAC® 8402 ZX and 8403 ZX C-HUB® II, Camera Control Unit 20 2901 01C-HUB® II Camera Control Unit, for use with C-CAM® Camera Head 20290132, Electronic Module 8402 X or compatible KARL STORZ CMOS video endoscopes, Interfaces: USB 2.0, S-Video output (NTSC), HDMI output, power socket including: C-HUB® II C-HUB® Power Supply S-Video (Y/C) Connecting Cable USB Connecting Cable Video Editor C-MAC® III Monitor for CMOS Endoscopes 8403 ZX C-MAC® Monitor for CMOS Endoscopes, screen size 7" with 1280 x 800 pixel resolution, two camera inputs, a USB and a HDMI port, optimized user interface, video and image capturing in real time on SD card, playback of recorded video clips and still images, data transfer from SD card to USB flash drive possible, splash-proof according to IP54, suitable for wipe disinfection, shockresistant ABS plastic housing, intelligent power management with rechargeable Li-Ion batteries, VESA 75 mounting option, power adaptor for EU, UK, USA and Australia, power supply 110 – 240 VAC, 50/60 Hz including: C-MAC® Monitor Protection Cap VESA 75 Quick Clip Power Supply Set, for use with CMOS video endoscopes Notes 6 7 Notes It is recommended to check the suitability of the product for the intended procedure prior to use. Consent to receive electronic information 96202061 TP 41-4 10/2014/EW-E q Yes, I agree to receive future information by email at the following address: Email Name Department / Practice Street address ZIP, Town Signature I agree to my data being stored at KARL STORZ for this purpose. I can withdraw my consent at any time and without giving reasons by emailing KARL STORZ at info@karlstorz.com. KARL STORZ will not make these data available to third parties. KARL STORZ Endoscopy-America, Inc. 2151 East Grand Avenue El Segundo, CA 90245-5017, USA Phone: +1 424 218-8100 Phone toll free: 800 421-0837 (US only) Fax: +1 424 218-8525 Fax toll free: 800 321-1304 (US only) E-Mail: info@ksea.com 96202061 TP 41-4 10/2014/EW-E KARL STORZ GmbH & Co. KG Mittelstraße 8, 78532 Tuttlingen, Germany Postbox 230, 78503 Tuttlingen, Germany Phone: +49 (0)7461 708-0 Fax: +49 (0)7461 708-105 E-Mail: info@karlstorz.com www.karlstorz.com
© Copyright 2024