1. No category

IRWIN AIR LTD
BREATHING AIR
COMPRESSORS
We offer 3 styles of compressor units with different configurations and features to help meet
your varying breathing air needs.
“H” Horizontal
These are ideal starter systems that allow you to build to suit.
“C” Compact
This unit offers a list of convenient features built on a compact open frame.
“V” Vertical
Our Vertical systems come with a large list of standard components, built in an enclosed cabinet.
AVAILABLE FEATURES:
STD
Powder Coated Frame
H, C, V
Vibration Isolation Of Compressor And Motor
H, C, V
Pressure Switch Activated Shutdown
H, C, V
Inter-stage And Final Stage Safety Relief Valves
H, C, V
Inter-stage And Final Oil/Water Separators
H, C, V
CRN Registered Purification And Final Separator Towers
H, C, V
Pressure Maintaining And Check Valves
H, C, V
Optional
5 Hour Continuous Run Shut Down
C, V
H
Automatic And Manual Operation Modes
C, V
H
Individual Stage And Discharge Pressure Gauge Panel
C, V
H
PLC Control Of Compressor System
C, V
H
Visual And Audible Fault Indicators
C, H
H
Ergonomic Gauge And Control Panel
C, V
H
Automatic Condensate Drain With Silent Collection
Reservoir
C, V
H
High Air Temperature Alarm And Shutdown
V
H, C
Low Oil Level/Pressure Alarm And Shutdown
V
H, C
Not
Available
Sound Insulating Panels
V
H, C
Ultra Silent Package
V
H, C
Carbon Dioxide or Moisture Monitors
H, C, V
Low Pressure (Shop Air) Connection
H,C, V
With deliveries from 4.2 thru 25 scfm and pressures up to 6000psi, we offer units for
rural fire departments, industrial sites and large urban centers.
Model
PSI
Stage
SCFM
HP
Phase
Frame Style
Purification
C35
4500
4
4.2
3.5
1, 3
“H”
5,000CUFT
C55
5000
3
6.6
5
1, 3
“H”, “C”, “V”
15,000CUFT
C90
5000
3
10.8
7.5
1, 3
“H”, “C”, “V”
28,000CUFT
C90H
6000
3
9.0
7.5
1, 3
“C”, “V”
28,000CUFT
M13
6000
4
14
10
1, 3
“C”, “V”
40,000cuft
M16
6000
4
19
15
3
“C”, “V”
60,000cuft
M25
6000
4
26
20
3
“C”, “V”
80,000cuft
COMPACT
VERTICAL
HORIZONTAL
IRWIN AIR COMPRESSOR UNITS
Irwin Air Ltd. has sold compressor systems and provided field service throughout British Columbia for
40 years and we are expanding across Canada. We specialize in a single product line, High
Pressure Breathing Air Compressor Systems including Compressors, Fill Stations, Control
Panels and Cylinders. Our reputation has been built by our ongoing commitment to service.
Irwin Air compressors are built to withstand the stresses of modern, continuous duty applications in the most
demanding environments. Our systems are the ideal choice for flexibility and trouble-free performance
in situations calling for pressures up to 6,000 psi with delivery capacities from 3.5 to 25 scfm.
All Irwin Air compressor units are built to the highest quality standards and are supported by a 2 year warranty. In
each one of our models you can expect...
Dependable Performance: suited for continuous operation, due to the rugged design and corrosion
resistant filters and cooler assemblies.
State-of-the-Art Design: balanced moving parts in the drive gear allow for low vibration and balanced
rod loads. Inter-stage coolers, finned cylinders and heads, and high output fan produce cooler operating and
discharge temperatures. A ringed final piston and 1st stage reed valve allow for quieter more efficient operation.
Top Grade Materials: cast iron cylinders for long life; ductile iron counterbalanced crankshaft with
large diameter throw for low bearing loads and increased life; aluminum cylinder heads for
superior heat dissipation; 7075-T6 aluminum connecting rods for high strength.
Quality Assurance: All compressor pumps are individually tested and certified for performance
and all electrical components and systems are inspected and approved by CSA. Our in-house manufactured
purification filters and CRN vessels provide the highest quality of air to meet CSA Z180. As a licensed contractor
(MA-2272) and manufacturer through BC Safety Authority we build CRN components and ASME Pressure Piping to
CSA B31.1, B31.3 & B51-97.
High Quality Components: anti-friction bearings for smooth operation with lower horsepower;
front and rear bearings for precise crankshaft alignment and long shaft life; fly wheel
precision-balanced and fan-bladed for excellent cooling capacity; generous lubrication to
critical wear areas for longer pump life; stainless steel inter and after coolers, disc-in-plate
valves for long wear and excellent heat resistance and dissipation.
Easy To Operate and Maintain: quick change air-intake filters and purifier cartridges for easy
maintenance
Irwin Air Ltd.
Unit #306- 5327 192nd Street
Surrey, BC, Canada, V3S 8E5
Toll Free 855-575-9697: Office 604-575-9697: Fax 604-575-9685
E-Mail irwinair@telus.net: Website www.irwinair.com
Your Air, Is Our Business
IRWIN AIR LTD
FILLING
PROTECTION
CC (Cylinder Containment) Fragmentation Cabinet
The CC-2 is designed for use with existing fill controls and fill lines to provide protection should a failure
occur. All our fill stations have been 3rd party tested and meet or exceed NFPA 1901/CSA Z180.
Standard Features:
-
All Steel Construction
Grade 8 Steel Structural Hardware
3rd Party Tested To Meet NFPA 1901/CSA Z180 Standard
Ergonomic Design for Easy Operation
Vertical Blast Tubes Direct Air Blast And Debris Away From The Operator Should A
Failure Occur
Use with Existing Fill Controls
1 or 2 SCBA Recharging
Designed To Fit All Sizes
Liners To Reduce Wear To SCBA Cylinders
Upgradeable to SS-2MS
SS/CS (Space Saver) Fragmentation Stations
Our Space Saver series offers great functionality in an ergonomically designed package. All our fill
stations have been 3rd party tested and meet or exceed NFPA 1901/CSA Z180.
Standard Features:
-
All Steel Construction
Grade 8 Steel Structural Hardware
Design 3rd Party Tested To Meet NFPA 1901/CSA Z180
Ergonomic Design For Comfortable Operation
Heads-Up Control Panel Allows Monitoring And Adjustments From a Standing Position
Vertical Blast Tubes Direct Air Blast And Debris Away From The Operator Should a
Failure Occur
1 or 2 SCBA Recharging
Designed To Fit All SCBA Cylinders
Single or Multiple Fill Pressures
Isolation Valve for each Fill Pressure
Safety Relief Valve for each Fill Pressure
Supply Shut-Off Valve
Color Coded Labels for Each Fill Position and Fill Pressure
Color Coded Fill Lines for each Fill position and Fill pressure
Adjustable, Self-Venting Regulator With Inlet & Outlet Gauges
Liners To Reduce Wear To SCBA Cylinders
SS-4PD
SS-2MS
Space Saver Fill Stations
Model
Cylinders
Pneumatic/Manual
Dual/Single Pressure
CS-2
2
Manual
Single
SS-2MD
2
Manual
Dual
SS-2PS
2
Pneumatic
Single
SS-2PD
2
Pneumatic
Dual
SS-3PS
3
Pneumatic
Single
SS-3PD
3
Pneumatic
Dual
SS-4PS
4
Pneumatic
Single
SS-4PD
4
Pneumatic
Dual
SS-5PS
5
Pneumatic
Single
SS-5PD
5
Pneumatic
Dual
SS-6PS
6
Pneumatic
Single
SS-6PD
6
Pneumatic
Dual
Fill Station Options
-
Auxiliary Bulkhead Fill Connection
-
Open Door Safety Shut Off
-
Integrated Cascade Cylinder Controls
-
SCUBA Blast Tube(s)
-
Low Pressure (Shop Air) Outlet
CC-2
IRWIN AIR FILL STATIONS
Irwin Air Ltd. has sold compressor systems and provided field service throughout British Columbia for 40
years and we are expanding across Canada. We specialize in SCBA Compressor Systems including
Compressors, Fill Stations, Control Panels and Cylinders.
Our reputation has been built on our ongoing commitment to service.
Irwin Air Fill Stations withstand the stresses of modern, continuous duty applications in the most
demanding environments. They are the ideal choice for flexibility and trouble-free performance with supply
pressures to 6,000psi and cylinder capacities from 2 to 6.
All Irwin Air products are built to the highest quality standards and are supported by a 2 year warranty. In
each one of our models you can expect...
State Of The Art Design
Irwin Air Fill Stations have been 3rd party tested to NFPA 1901/CSA Z180. Our units protect in the worst case
failure of an SCBA. When a bottom rupture occurs the cylinder becomes a projectile. The reinforced top,
bottom venting and vertical blast tubes offer the highest protection available.
Atypical Rupture (air blast and projectile)
in this failure the SCBA separates into 2 pieces
the top half including the valve leaves the blast tube
like a mortar. Air blast and projectile protection needed.
Typical rupture (air blast only) The
most common failure the SCBA
stays intact in the blast tube. Air
blast protection needed.
Quality Assurance:
All Fill stations are individually tested and certified for performance.
As a licensed contractor (MA-2272) and manufacturer by the BC Safety Authority we build CRN components
and ASME Pressure Piping to CSA B31.1, B31.3 & B51-97.
High Quality Components:
We use only the highest quality components in our fill stations. Wika Gauges, Aqua Environment, Parker
Hannifin and Sherwood are examples of our premium components.
Irwin Air Ltd.
Unit 306 – 5327 192nd St.
Surrey, BC, Canada, V3S 8E5
Toll Free 855-575-9697: Office 604-575-9697: Fax 604-575-9685
E-Mail irwinair@telus.net: Website www.irwinair.com
Your Air, Is Our Business